+

Search Tips   |   Advanced Search

Classic: Controlling traffic with network policies

This network policy information is specific to classic clusters. For network policy information for VPC clusters, see Controlling traffic with VPC access control lists.

Every Red Hat OpenShift on IBM Cloud cluster is set up with a network plug-in called Calico. Default network policies are set up to secure the public network interface of every worker node in the cluster.

We can use Calico and Kubernetes to create network policies for a cluster. With Kubernetes network policies, we can specify the network traffic that we want to allow or block to and from a pod within a cluster. To set more advanced network policies such as blocking inbound (ingress) traffic to network load balancer (NLB) services, use Calico network policies.

    Kubernetes network policies
    Kubernetes network policies specify how pods can communicate with other pods and with external endpoints. Both incoming and outgoing network traffic can be allowed or blocked based on protocol, port, and source or destination IP addresses. Traffic can also be filtered based on pod and namespace labels. Kubernetes network policies are applied by using oc commands or the Kubernetes APIs. When a Kubernetes network policy is applied, it is automatically converted into a Calico network policy so that Calico can apply it as an Iptables rule. The Calico network policy name has the knp.default prefix. To update the policy in the future, update the Kubernetes policy, and the updates are automatically applied to the Calico network policy.

    Calico network policies
    Calico network policies are a superset of the Kubernetes network policies and are applied by using calicoctl commands. Calico policies add the following features.

Calico enforces these policies, including any Kubernetes network policies that are automatically converted to Calico policies, by setting up Linux Iptables rules on the Kubernetes worker nodes. Iptables rules serve as a firewall for the worker node to define the characteristics that the network traffic must meet to be forwarded to the targeted resource.

In OpenShift Container Platform version 4, Calico is based on the Kubernetes data-store driver. For more information, see the Calico documentation.



Default Calico network policies

When a cluster with a public VLAN is created, a HostEndpoint resource with the ibm.role: worker_public label is created automatically for each worker node and its public network interface. To protect the public network interface of a worker node, default Calico policies are applied to any host endpoint with the ibm.role: worker_public label.

In clusters that run OpenShift version 4.3 or later, a HostEndpoint resource with the ibm.role: worker_private label is also created automatically for each worker node and its private network interface. To protect the private network interface of a worker node, default Calico policies are applied to any host endpoint with the ibm.role: worker_private label.

These default Calico host policies allow all outbound network traffic and allow inbound traffic to specific cluster components, such as Kubernetes NodePort, LoadBalancer, and Ingress services. Any other inbound network traffic from the internet to your worker nodes that isn't specified in the default policies is blocked. The default policies don't affect pod to pod traffic.

Do not remove policies that are applied to a host endpoint unless you fully understand the policy. Be sure that you do not need the traffic that is being allowed by the policy.

Review the following default Calico host policies that are automatically applied to the cluster.

Calico policy Description
allow-all-outbound Allows all outbound traffic on the public network.
allow-all-private-default In OpenShift version 1.164.3 or later: Allows all inbound and outbound traffic on the private network. Note: Before you update the cluster to Kubernetes version 1.16, see this topic for information about updating Calico private host endpoints and network policies.
allow-bigfix-port Allows incoming traffic on port 52311 to the BigFix app to allow necessary worker node updates.
allow-icmp Allows incoming ICMP packets (pings).
allow-node-port-dnat Allows incoming network load balancer (NLB), Ingress application load balancer (ALB), and NodePort service traffic to the pods that those services are exposing. Note: You don't need to specify the exposed ports because Kubernetes uses destination network address translation (DNAT) to forward the service requests to the correct pods. That forwarding takes place before the host endpoint policies are applied in Iptables.
allow-sys-mgmt Allows incoming connections for specific IBM Cloud infrastructure systems that are used to manage the worker nodes.
allow-vrrp Allows VRRP packets, which are used to monitor and move virtual IP addresses between worker nodes.



Installing and configuring the Calico CLI

To view, manage, and add Calico policies, install and configure the Calico CLI.

  1. Access the OpenShift cluster.

  2. Run the ibmcloud oc cluster config command and copy and paste the output to set the KUBECONFIG environment variable. Include the --admin and --network options with the ibmcloud oc cluster config command. The --admin option downloads the keys to access your infrastructure portfolio and run Calico commands on the worker nodes. The --network option downloads the Calico configuration file to run all Calico commands.

    ibmcloud oc cluster config --cluster <cluster_name_or_ID> --admin --network

  3. If corporate network policies use proxies or firewalls to prevent access from the local system to public endpoints, allow TCP access for Calico commands.

  4. Install the Calico CLI, calicoctl, according to your operating system.

    • Linux and OS X:

      1. Download the version of the Calico CLI that matches your operating system.

      2. Move the file to the /usr/local/bin directory.

         mv <filepath>/<filename> /usr/local/bin/calicoctl

      3. Make the file an executable file.

         chmod +x /usr/local/bin/calicoctl

      4. Create the /etc/calico directory.

         sudo mkdir /etc/calico

      5. Move the Calico configuration file that you previously downloaded to the directory.

         sudo mv /Users/<user>/.bluemix/plugins/container-service/clusters/<cluster_name>-admin/calicoctl.cfg /etc/calico

      6. Verify that the Calico configuration is working correctly.

         calicoctl get nodes

        Example output:

         NAME
 kube-btkc78sw0gqlletjgfp0-eventtest3-default-000001d6
 ...

    • Windows:

      1. Download the Calico CLI. Save the file as calicoctl.exe in the same directory as the IBM Cloud CLI. This setup saves you some file path changes when you run commands later.

      2. Verify that the Calico configuration is working correctly. Use the --config flag to point to the network configuration file that you got in step 1. Include this flag each time you run a calicoctl command.

         calicoctl get nodes --config=<filepath>/calicoctl.cfg

        Example output:

         NAME
 kube-btkc78sw0gqlletjgfp0-eventtest3-default-000001d6
 ...



Viewing network policies

View the details for default and any added network policies that are applied to the cluster.

Before beginning:

  1. Install and configure the Calico CLI.

  2. Access the OpenShift cluster.

  3. Run the ibmcloud oc cluster config command and copy and paste the output to set the KUBECONFIG environment variable. Include the --admin and --network options with the ibmcloud oc cluster config command. The --admin option downloads the keys to access your infrastructure portfolio and run Calico commands on the worker nodes. The --network option downloads the Calico configuration file to run all Calico commands.

    ibmcloud oc cluster config --cluster <cluster_name_or_ID> --admin --network


To view network policies in clusters:

If you use a Windows machine, we must include the --config=<filepath>/calicoctl.cfg flag in all calicoctl commands.

  1. View the Calico host endpoint.

     calicoctl get hostendpoint -o yaml

  2. View all of the Calico and Kubernetes network policies that were created for the cluster. This list includes policies that might not be applied to any pods or hosts yet. For a network policy to be enforced, a Kubernetes resource must be found that matches the selector that was defined in the Calico network policy.

    Network policies are scoped to specific namespaces:

     calicoctl get NetworkPolicy --all-namespaces -o wide

    Global network policies are not scoped to specific namespaces:

     calicoctl get GlobalNetworkPolicy -o wide

  3. View details for a network policy.

     calicoctl get NetworkPolicy -o yaml <policy_name> --namespace <policy_namespace>

  4. View the details of all global network policies for the cluster.

     calicoctl get GlobalNetworkPolicy -o yaml



Adding network policies

In most cases, the default policies do not need to be changed. Only advanced scenarios might require changes. If we find that we must make changes, we can create your own network policies.

To create Kubernetes network policies, see the Kubernetes network policy documentation.

To create Calico policies, use the following steps.

  1. Install and configure the Calico CLI.

  2. Access the OpenShift cluster.

  3. Run the ibmcloud oc cluster config command and copy and paste the output to set the KUBECONFIG environment variable. Include the --admin and --network options with the ibmcloud oc cluster config command. The --admin option downloads the keys to access your infrastructure portfolio and run Calico commands on the worker nodes. The --network option downloads the Calico configuration file to run all Calico commands.

    ibmcloud oc cluster config --cluster <cluster_name_or_ID> --admin --network

  4. Define the Calico network policy or global network policy by creating a configuration script (.yaml) with Calico v3 policy syntax. These configuration files include the selectors that describe what pods, namespaces, or hosts that these policies apply to. Refer to these sample Calico policies to help you create your own.

  5. Apply the policies to the cluster. If you use a Windows machine, include the --config=<filepath>/calicoctl.cfg flag.

     calicoctl apply -f policy.yaml [--config=<filepath>/calicoctl.cfg]



Controlling inbound traffic to NLB or NodePort services

By default, Kubernetes NodePort and LoadBalancer services are designed to make the app available on all public and private cluster interfaces. However, we can use Calico policies to block incoming traffic to your services based on traffic source or destination.

Default Kubernetes and Calico policies are difficult to apply to protecting Kubernetes NodePort and LoadBalancer services due to the DNAT Iptables rules generated for these services. However, pre-DNAT policies prevent specified traffic from reaching our apps because they generate and apply Iptables rules before Kubernetes uses regular DNAT to forward traffic to pods.

Some common uses for Calico pre-DNAT network policies:

  • Block traffic to public node ports of a private network load balancer (NLB) service: An NLB service makes the app available over the NLB IP address and port and makes the app available over the service's node ports. Node ports are accessible on every IP address (public and private) for every node within the cluster.
  • Block traffic to public node ports on clusters that are running edge worker nodes: Blocking node ports ensures that the edge worker nodes are the only worker nodes that handle incoming traffic.
  • Block traffic from certain source IP addresses or CIDRs
  • Allow traffic from only certain source IP addresses or CIDRs, and block all other traffic

To see how to allow or block source IP addresses, try the Using Calico network policies to block traffic tutorial. For more example Calico network policies that control traffic to and from the cluster, we can check out the stars policy demo and the advanced network policy.

Before beginning:

  1. Install and configure the Calico CLI.

  2. Access the OpenShift cluster.

  3. Run the ibmcloud oc cluster config command and copy and paste the output to set the KUBECONFIG environment variable. Include the --admin and --network options with the ibmcloud oc cluster config command. The --admin option downloads the keys to access your infrastructure portfolio and run Calico commands on the worker nodes. The --network option downloads the Calico configuration file to run all Calico commands.

    ibmcloud oc cluster config --cluster <cluster_name_or_ID> --admin --network


To create a pre-DNAT policy:

  1. Define a Calico pre-DNAT network policy for ingress (inbound traffic) access to Kubernetes services.

    • Use Calico v3 policy syntax.

      Example resource that blocks traffic to all public node ports:

        apiVersion: projectcalico.org/v3
  kind: GlobalNetworkPolicy
  metadata:
    name: deny-nodeports
  spec:
    applyOnForward: true
    preDNAT: true
    ingress:
    - action: Deny
      destination:
        ports:
        - 30000:32767
      protocol: TCP
      source: {}
    - action: Deny
      destination:
        ports:
        - 30000:32767
      protocol: UDP
      source: {}
    selector: ibm.role=='worker_public'
    order: 1100
    types:
    - Ingress

      Example resource that allows traffic from only a specified source CIDR to an NLB 1.0:

        apiVersion: projectcalico.org/v3
  kind: GlobalNetworkPolicy
  metadata:
    name: allowlist
  spec:
    applyOnForward: true
    preDNAT: true
    ingress:
    - action: Allow
      destination:
        nets:
        - <loadbalancer_IP>/32
        ports:
        - 80
      protocol: TCP
      source:
        nets:
        - <client_address>/32
    selector: ibm.role=='worker_public'
    order: 500
    types:
    - Ingress

  2. Apply the Calico preDNAT network policy. If you use a Windows machine, include the --config=<filepath>/calicoctl.cfg flag. It takes about 1 minute for the policy changes to be applied throughout the cluster.

    calicoctl apply -f deny-nodeports.yaml [--config=<filepath>/calicoctl.cfg]

  3. Optional: In multizone clusters, a multizone load balancer (MZLB) health checks the Ingress application load balancers (ALBs) in each zone of the cluster and keeps the DNS lookup results updated based on these health checks. If you use pre-DNAT policies to block all incoming traffic to Ingress services, we must allow inbound access to your ALBs from the ports and IP addresses in step 2 of this section and Cloudflare's IPv4 IPs that are used to check the health of our ALBs on port 80. For steps on how to create a Calico pre-DNAT policy to allow these IPs, see Lesson 3 of the Calico network policy tutorial.


Isolating clusters on the public network

We can isolate the cluster on the public network by applying Calico public network policies.

This set of Calico policies work in conjunction with the default Calico policies to block most public network traffic of a cluster while allowing communication that is necessary for the cluster to function to specific subnets. To see a list of the ports that are opened by these policies and a list of the policies that are included, see the README for the Calico public network policies.

When you apply the egress pod policies that are included in this policy set, only network traffic to the subnets and ports that are specified in the pod policies is permitted. All traffic to any subnets or ports that are not specified in the policies is blocked for all pods in all namespaces. Because only the ports and subnets that are necessary for the pods to function in IBM Cloud Kubernetes Service are specified in these policies, the pods cannot send network traffic over the internet until you add or change the Calico policy to allow them to.

Whenever new locations for Red Hat OpenShift on IBM Cloud and other IBM Cloud are enabled, the subnets for these locations are added to the Calico policies. Be sure to watch the GitHub repository for any updates to these policies and keep the local isolation policies up-to-date.

Before beginning:

  1. Install and configure the Calico CLI.

  2. Access the OpenShift cluster.

  3. Run the ibmcloud oc cluster config command and copy and paste the output to set the KUBECONFIG environment variable. Include the --admin and --network options with the ibmcloud oc cluster config command. The --admin option downloads the keys to access your infrastructure portfolio and run Calico commands on the worker nodes. The --network option downloads the Calico configuration file to run all Calico commands.

    ibmcloud oc cluster config --cluster <cluster_name_or_ID> --admin --network

If you use a Windows machine, we must include the --config=<filepath>/calicoctl.cfg flag in all calicoctl commands.

To protect the cluster on the public network by using Calico policies:

  1. Clone the IBM-Cloud/kube-samples repository.

    git clone https://github.com/IBM-Cloud/kube-samples.git

  2. Navigate to the public policy directory for the region that the cluster is in. Example command for a cluster in US South:

    cd <filepath>/IBM-Cloud/kube-samples/calico-policies/public-network-isolation/us-south

  3. Apply the policies.

    calicoctl apply -f allow-egress-pods-public.yaml
calicoctl apply -f allow-ibm-ports-public.yaml
calicoctl apply -f allow-public-service-endpoint.yaml
calicoctl apply -f deny-all-outbound.yaml

  4. Optional: To allow your worker nodes to access other IBM Cloud services over the public network, apply the allow-public-services.yaml and allow-public-services-pods.yaml policies. The policy allows access to the IP addresses for IBM Cloud Container Registry, and if the services are available in the region, IBM Log Analysis with LogDNA and IBM Cloud Monitoring with Sysdig. To access other IBM Cloud services, we must manually add the subnets for those services to this policy.

    calicoctl apply -f allow-public-services.yaml
calicoctl apply -f allow-public-services-pods.yaml

  5. Verify that the policies are applied.

    calicoctl get GlobalNetworkPolicies -o yaml



Isolating clusters on the private network

We can isolate the cluster from other systems on the private network by applying Calico private network policies.

This set of Calico policies and host endpoints can isolate the private network traffic of a cluster from other resources in the account's private network, while allowing communication on the private network that is necessary for the cluster to function. For example, when you enable VRF or VLAN spanning to allow worker nodes to communicate with each other on the private network, any instance that is connected to any of the private VLANs in the same IBM Cloud account can communicate with your worker nodes.

To see a list of the ports that are opened by these policies and a list of the policies that are included, see the README for the Calico private network policies.

When you apply the egress pod policies that are included in this policy set, only network traffic to the subnets and ports that are specified in the pod policies is permitted. All traffic to any subnets or ports that are not specified in the policies is blocked for all pods in all namespaces. Because only the ports and subnets that are necessary for the pods to function in IBM Cloud Kubernetes Service are specified in these policies, the pods cannot send network traffic over the private network until you add or change the Calico policy to allow them to.

Whenever new locations for Red Hat OpenShift on IBM Cloud and other IBM Cloud are enabled, the subnets for these locations are added to the Calico policies. Be sure to watch the GitHub repository for any updates to these policies and keep the local isolation policies up-to-date.

Before beginning:

  1. Install and configure the Calico CLI.

  2. Access the OpenShift cluster.

  3. Run the ibmcloud oc cluster config command and copy and paste the output to set the KUBECONFIG environment variable. Include the --admin and --network options with the ibmcloud oc cluster config command. The --admin option downloads the keys to access your infrastructure portfolio and run Calico commands on the worker nodes. The --network option downloads the Calico configuration file to run all Calico commands.

    ibmcloud oc cluster config --cluster <cluster_name_or_ID> --admin --network

If you use a Windows machine, we must include the --config=<filepath>/calicoctl.cfg flag in all calicoctl commands.

To isolate the cluster on the private network by using Calico policies:

  1. Clone the IBM-Cloud/kube-samples repository.

    git clone https://github.com/IBM-Cloud/kube-samples.git

  2. Navigate to the calico-v3 private policy directory for the region that the cluster is in. Example command for a cluster in US South:

    cd <filepath>/IBM-Cloud/kube-samples/calico-policies/private-network-isolation/calico-v3/us-south

  3. Apply the policies.

    calicoctl apply -f allow-all-workers-private.yaml
calicoctl apply -f allow-egress-pods-private.yaml
calicoctl apply -f allow-ibm-ports-private.yaml
calicoctl apply -f allow-icmp-private.yaml
calicoctl apply -f allow-private-service-endpoint.yaml
calicoctl apply -f allow-sys-mgmt-private.yaml
calicoctl apply -f deny-all-private-default.yaml

  4. OpenShift version 3.11 clusters only: Set up private host endpoints for the worker nodes. When your worker nodes have private host endpoints, the policies that you apply can target the worker node private interface (eth0) and the pod network of a cluster.

    1. Open the generic-privatehostendpoint.yaml policy.
    2. Replace <worker_name> with the name of a worker node.

      Some worker nodes must follow a different naming structure for Calico policies. You must use the name that is returned when you run calicoctl get nodes --config=<filepath>/calicoctl.cfg.

    3. Replace <worker-node-private-ip> with the private IP address for the worker node. To see your worker nodes' private IPs, run ibmcloud oc worker ls --cluster <my_cluster>.
    4. For each worker node in the cluster, repeat these steps in a separate entry in the file.

      Each time you add a worker node to a cluster, we must update the host endpoints file with the new entries.

    5. Save the policy.
    6. Apply the policy. 
      calicoctl apply -f generic-privatehostendpoint.yaml

  5. Optional: To allow your workers and pods to access IBM Cloud Container Registry over the private network, apply the allow-private-services.yaml and allow-private-services-pods.yaml policies. To access other IBM Cloud services that support private service endpoints, we must manually add the subnets for those services to this policy.

    calicoctl apply -f allow-private-services.yaml
calicoctl apply -f allow-private-services-pods.yaml

  6. Optional: To expose our apps with private network load balancers (NLBs) or Ingress application load balancers (ALBs), we must open the VRRP protocol by applying the allow-vrrp-private policy.

    calicoctl apply -f allow-vrrp-private.yaml

    We can further control access to networking services by creating Calico pre-DNAT policies. In the pre-DNAT policy, ensure that you use selector: ibm.role=='worker_private' to apply the policy to the workers' private host endpoints.

  7. Verify that the policies are applied.

    calicoctl get GlobalNetworkPolicies -o yaml



Controlling traffic between pods

Kubernetes policies protect pods from internal network traffic. We can create simple Kubernetes network policies to isolate app microservices from each other within a namespace or across namespaces.

For more information about how Kubernetes network policies control pod-to-pod traffic and for more example policies, see the Kubernetes documentation.


Isolate app services within a namespace

The following scenario demonstrates how to manage traffic between app microservices within one namespace.

An Accounts team deploys multiple app services in one namespace, but they need isolation to permit only necessary communication between the microservices over the public network. For the app Srv1, the team has front end, back end, and database services. They label each service with the app: Srv1 label and the tier: frontend, tier: backend, or tier: db label.

The Accounts team wants to allow traffic from the front end to the back end, and from the back end to the database. They use labels in their network policies to designate which traffic flows are permitted between microservices.

First, they create a Kubernetes network policy that allows traffic from the front end to the back end:

kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  name: backend-allow
spec:
  podSelector:
    matchLabels:
      app: Srv1
      tier: backend
  ingress:
  - from:
    - podSelector:
        matchLabels:
 app: Srv1
 Tier: frontend

The spec.podSelector.matchLabels section lists the labels for the Srv1 back-end service so that the policy applies only to those pods. The spec.ingress.from.podSelector.matchLabels section lists the labels for the Srv1 front-end service so that ingress is permitted only from those pods.

Then, they create a similar Kubernetes network policy that allows traffic from the back end to the database:

kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  name: db-allow
spec:
  podSelector:
    matchLabels:
      app: Srv1
      tier: db
  ingress:
  - from:
    - podSelector:
        matchLabels:
 app: Srv1
 Tier: backend

The spec.podSelector.matchLabels section lists the labels for the Srv1 database service so that the policy applies only to those pods. The spec.ingress.from.podSelector.matchLabels section lists the labels for the Srv1 back-end service so that ingress is permitted only from those pods.

Traffic can now flow from the front end to the back end, and from the back end to the database. The database can respond to the back end, and the back end can respond to the front end, but no reverse traffic connections can be established.


Isolate app services between namespaces

The following scenario demonstrates how to manage traffic between app microservices across multiple namespaces.

Services that are owned by different subteams need to communicate, but the services are deployed in different namespaces within the same cluster. The Accounts team deploys front end, back end, and database services for the app Srv1 in the accounts namespace. The Finance team deploys front end, back end, and database services for the app Srv2 in the finance namespace. Both teams label each service with the app: Srv1 or app: Srv2 label and the tier: frontend, tier: backend, or tier: db label. They also label the namespaces with the usage: accounts or usage: finance label.

The Finance team's Srv2 needs to call information from the Accounts team's Srv1 back end. So the Accounts team creates a Kubernetes network policy that uses labels to allow all traffic from the finance namespace to the Srv1 back end in the accounts namespace. The team also specifies the port 3111 to isolate access through that port only.

kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  Namespace: accounts
  name: accounts-allow
spec:
  podSelector:
    matchLabels:
      app: Srv1
      Tier: backend
  ingress:
  - from:
    - NamespaceSelector:
        matchLabels:
 usage: finance
      ports:
        port: 3111

The spec.podSelector.matchLabels section lists the labels for the Srv1 back-end service so that the policy applies only to those pods. The spec.ingress.from.NamespaceSelector.matchLabels section lists the label for the finance namespace so that ingress is permitted only from services in that namespace.

Traffic can now flow from finance microservices to the accounts Srv1 back end. The accounts Srv1 back end can respond to finance microservices, but can't establish a reverse traffic connection.

In this example, all traffic from all microservices in the finance namespace is permitted. We can't allow traffic from specific app pods in another namespace because podSelector and namespaceSelector can't be combined.



Logging denied traffic

To log denied traffic requests to certain pods in the cluster, we can create a Calico log network policy.

When you set up network policies to limit traffic to app pods, traffic requests that are not permitted by these policies are denied and dropped. In some scenarios, we might want more information about denied traffic requests. For example, you might notice some unusual traffic that is continuously being denied by one of our network policies. To monitor the potential security threat, we can set up logging to record every time that the policy denies an attempted action on specified app pods.

This section shows you how to log traffic that is denied by a Kubernetes network policy. To log traffic that is denied by a Calico network policy, see Lesson 5 of the Calico network policy tutorial.

Before beginning:

  1. Install and configure the Calico CLI.

  2. Access the OpenShift cluster.

  3. Run the ibmcloud oc cluster config command and copy and paste the output to set the KUBECONFIG environment variable. Include the --admin and --network options with the ibmcloud oc cluster config command. The --admin option downloads the keys to access your infrastructure portfolio and run Calico commands on the worker nodes. The --network option downloads the Calico configuration file to run all Calico commands.

    ibmcloud oc cluster config --cluster <cluster_name_or_ID> --admin --network


To log denied traffic:

  1. Create or use an existing Kubernetes network policy that blocks or limits incoming traffic.

    1. Create a Kubernetes network policy. For example, to control traffic between pods, we might use the following example Kubernetes policy that is named access-nginx that limits access to an NGINX app. Incoming traffic to pods that are labeled "run=nginx" is allowed only from pods with the "run=access" label. All other incoming traffic to the "run=nginx" app pods is blocked.

      kind: NetworkPolicy
apiVersion: networking.k8s.io/v1
metadata:
  name: access-nginx
spec:
  podSelector:
    matchLabels:
      run: nginx
  ingress:
    - from:
      - podSelector:
 matchLabels:
   run: access

    2. Apply the policy. The Kubernetes policy is automatically converted to a Calico NetworkPolicy so that Calico can apply it as Iptables rules. The Calico network policy name has the knp.default prefix. To update the policy in the future, update the Kubernetes policy and the updates are automatically applied to the Calico network policy.

      oc apply -f <policy_name>.yaml

    3. Review the syntax of the automatically created Calico policy and copy the value of the spec.selector field. If you use a Windows machine, include the --config=<filepath>/calicoctl.cfg flag.

      calicoctl get policy -o yaml knp.default.<policy_name> [--config=<filepath>/calicoctl.cfg]

      For example, after the Kubernetes policy is applied and converted to a Calico NetworkPolicy, the access-nginx policy has the following Calico v3 syntax. The spec.selector field has the value projectcalico.org/orchestrator == 'k8s' && run == 'nginx'.

      apiVersion: projectcalico.org/v3
kind: NetworkPolicy
metadata:
  name: knp.default.access-nginx
spec:
  ingress:
  - action: Allow
    destination: {}
    source:
      selector: projectcalico.org/orchestrator == 'k8s' && run == 'access'
  order: 1000
  selector: projectcalico.org/orchestrator == 'k8s' && run == 'nginx'
  types:
  - Ingress

  2. To log all the traffic that is denied by the policy you created in the previous step, create a Calico NetworkPolicy named log-denied-packets. For example, the following log policy uses the same pod selector as the example access-nginx Kubernetes policy described in step 1, which adds this policy to the Calico Iptables rule chain. By using a higher-order number, such as 3000, we can ensure that this rule is added to the end of the Iptables rule chain. Any request packet from the run=access-labeled pod that matches the access-nginx policy rule is accepted by the run=nginx-labeled pods. However, when packets from any other source try to match the low-order access-nginx policy rule, they are denied. Those packets then try to match the high-order log-denied-packets policy rule. log-denied-packets logs any packets that arrive to it, so only packets that were denied by the run=nginx-labeled pods are logged. After the packets' attempts are logged, the packets are dropped.

    apiVersion: projectcalico.org/v3
kind: NetworkPolicy
metadata:
 name: log-denied-packets
spec:
 types:
 - Ingress
 ingress:
 - action: Log
   destination: {}
   source: {}
 selector: projectcalico.org/orchestrator == 'k8s' && run == 'nginx'
 order: 3000
    Component Description
    types This Ingress policy applies to all incoming traffic requests. The value Ingress is a general term for all incoming traffic, and does not refer to traffic only from the IBM Ingress ALB.
    ingress
    • action: The Log action writes a log entry for any requests that match this policy to the /var/log/syslog path on the worker node.
    • destination: No destination is specified because the selector applies this policy to all pods with a certain label.
    • source: This policy applies to requests from any source.
    selector Replace <selector> with the same selector in the spec.selector field that you used in your policy from step 1. For example, by using the selector selector: projectcalico.org/orchestrator == 'k8s' && run == 'nginx', this policy's rule is added to the same Iptables chain as the access-nginx sample Kubernetes network policy rule in step 1. This policy applies only to incoming network traffic to pods that use the same selector label.
    order Calico policies have orders that determine when they are applied to incoming request packets. Policies with lower orders, such as 1000, are applied first. Policies with higher orders are applied after the lower-order policies. For example, a policy with a very high order, such as 3000, is effectively applied last after all the lower-order policies have been applied.

    Incoming request packets go through the Iptables rules chain and try to match rules from lower-order policies first. If a packet matches any rule, the packet is accepted. However, if a packet doesn't match any rule, it arrives at the last rule in the Iptables rules chain with the highest order. To make sure that this policy is the last policy in the chain, use a much higher order, such as 3000, than the policy you created in step 1.

  3. Apply the policy. If you use a Windows machine, include the --config=<filepath>/calicoctl.cfg flag.

    calicoctl apply -f log-denied-packets.yaml [--config=<filepath>/calicoctl.cfg]

  4. Generate log entries by sending requests that are not allowed by the policy that you created in step 1. For example, try to ping the pod that is protected by the network policy from a pod or an IP address that is not permitted.

  5. Check for log entries that are written to the /var/log/syslog path. The DST (destination) or SRC (source) IP addresses in the log entry might be different than expected due to proxies, Network Address Translation (NAT), and other networking processes. The log entry looks similar to the following.

    Sep 5 14:34:40 <worker_hostname> kernel: [158271.044316] calico-packet: IN=eth1 OUT= MAC=08:00:27:d5:4e:57:0a:00:27:00:00:00:08:00 SRC=192.XXX.XX.X DST=192.XXX.XX.XX LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52866 DF PROTO=TCP SPT=42962 DPT=22 WINDOW=29200 RES=0x00 SYN URGP=0

  6. Optional: Forward the logs from /var/log/syslog to IBM® Log Analysis with LogDNA.