Software installation process

 

The i5/OS^® software installation process has three phases: preinstallation activities, the main installation, and postinstallation activities.

1. Preinstallation activities:

   You can do these activities days or even a few weeks in advance. To plan and prepare your system before you install your software, use the appropriate planning and preparation topics to guide you through the activities that do.

   • Upgrading to V5R4 from either V5R2 or V5R3: Checklist: i5/OS software upgrade or replacement readiness

   • Replacing Licensed Internal Code and i5/OS of the same version and release to support new hardware: Checklist: i5/OS software replacement

   • Installing V5R4 on a new system or logical partition: Checklist: i5/OS software installation readiness

   These activities include verifying your order, checking the amount of available disk space, backing up your system, and cleaning your media device. In a software upgrade or replacement, some of the tasks are required. If you do not perform these required tasks, you will be forced to restart the installation.

2. The installation process:

   The installation process begins when you start performing the instructions in one of the procedural topics. For example, to upgrade to the new release, you might have chosen automatic installation. The automatic installation process installs the Licensed Internal Code, the operating system (i5/OS), and licensed programs. You would have minimal interaction with the system, except to load the optical distribution media and to monitor the system.

   Your only installation activity might be changing the primary language or installing additional licensed programs. Or, perhaps you want to perform these activities after an automatic or manual installation.

3. Postinstallation activities:

   The last step of each procedure directs you to use a completion checklist. You might be directed to additional steps, such as saving your system and performing installation activities on workstations for IBM^® eServer™ iSeries™ Access Family products. Other activities could include customizing your system, or setting usage limits for user-based priced products. Before you begin production work on your system, be sure to adequately protect your system from unauthorized use.

   The following figure shows an example of one type of software installation. (Your particular installation might not include all of the topics that are shown in this figure.) Figure 1. Overview of the installation process

   

The procedure that you use for software installation depends on what you plan to install.

Install software on a new system

If you just received a new system, the operating system and other licensed programs might or might not be installed already.

Upgrade or replace existing software

If you are upgrading or replacing your existing OS/400^® or i5/OS software, use either the automatic installation method or the manual installation method.

Automatic installation

This replaces your existing release with minimal user interaction. The language feature code on the distribution media is installed as the primary language on the system. The automatic installation process keeps the current environment and system values. The process can add all nonconfigured disk units to the system auxiliary storage pool (ASP) and retain the ASP configuration of previously configured disk units. The automatic installation process is recommended for use with most systems.

Manual installation

This interactively replaces your existing release by using the Work with Licensed Programs menu. Displays that require responses appear on the console. During a manual installation, you can change installation options. Use the manual installation process if you are doing any of the following installation procedures:

• Adding a disk device using mirrored protection, device parity protection, or user auxiliary storage pools.

• Changing the environment (i5/OS or System/36™), system values, language feature code, or configuration values.

• Planning to use an alternate installation device when you upgrade.

• Creating logical partitions during the installation process.

• Using tapes created with the Save System (SAVSYS) command. (The SAVSYS command creates tapes that are meant for recovery.)

Add licensed programs

When you add additional licensed programs (in addition to those done already in the methods mentioned above) or optional parts of licensed programs, you use the method done through option 11 (Install licensed programs) of the Work with Licensed Programs (LICPGM) menu. Typically you use option 11 when install a new licensed program or to replace a single licensed program.

Add or change globalization support

When you add a secondary language, you add additional language objects for the licensed programs that are installed on your system.

When you change the primary language, you replace the existing language objects. Depending on the procedure that you use, you can also replace program objects.

If a failure occurs during the installation process, Troubleshooting software installation problems contains information that can help you determine the problem and the necessary recovery steps.

 

Parent topic:

Concepts for software installation