Design an enterprise application to use JMS

There are many things to consider when designing an enterprise application to use the JMS APIs directly for asynchronous messaging.

• For messaging operations, you should write application programs that use only references to the interfaces defined in Sun's javax.jms package.

  JMS defines a generic view of messaging that maps onto the underlying transport. An enterprise application that uses JMS makes use of the following interfaces defined in Sun's javax.jms package:

  Connection

  Provides access to the underlying transport, and is used to create Sessions.

  Session

  Provides a context for producing and consuming messages, including the methods used to create MessageProducers and MessageConsumers.

  MessageProducer

  Used to send messages.

  MessageConsumer

  Used to receive messages.

  The generic JMS interfaces are subclassed into the following more specific versions for point-to-point and publish/subscribe behavior.

  publish/subscribe versions of JMS common interfaces. The first column of this table lists the JMS common interfaces, the second column lists the corresponding point-to-point interfaces, and the

  JMS common interfaces	Point-to-point interfaces	Publish/subscribe interfaces
  ConnectionFactory	QueueConnectionFactory	TopicConnectionFactory
  Connection	QueueConnection	TopicConnection
  Destination	Queue	Topic
  Session	QueueSession,	TopicSession,
  MessageProducer	QueueSender	TopicPublisher
  MessageConsumer	QueueReceiver, QueueBrowser	TopicSubscriber

  For more information about using these JMS interfaces, see the Java Message Service Documentation and the Use Java section of the WebSphere MQ information center.

  The section "Java Message Service (JMS) Requirements" of the J2EE specification gives a list of methods that must not be called in web and EJB containers:

        javax.jms.Session method setMessageListener
        javax.jms.Session method getMessageListener
        javax.jms.Session method run       javax.jms.QueueConnection method createConnectionConsumer
        javax.jms.TopicConnection method createConnectionConsumer
        javax.jms.TopicConnection method createDurableConnectionConsumer
        javax.jms.MessageConsumer method getMessageListener
        javax.jms.MessageConsumer method setMessageListener
        javax.jms.Connection setExceptionListener
        javax.jms.Connection stop
        javax.jms.Connection setClientID

  This method restriction is enforced in WebSphere Application Server by throwing a javax.jms.IllegalStateException exception.

• Applications refer to JMS resources that are predefined, as administered objects, to WebSphere Application Server.

  Details of JMS resources used by enterprise applications are defined to WebSphere Application Server and bound into the JNDI namespace by the WebSphere administrative support. An enterprise application can retrieve these objects from the JNDI namespace and use them without needing to know anything about their implementation. This enables the underlying messaging architecture defined by the JMS resources to be changed without requiring changes to the enterprise application.

  publish/subscribe messaging. The first column of this table lists the JMS resources for point-to-point messaging, and the

  Point-to-point	Publish/subscribe
  ConnectionFactory (or QueueConnectionFactory) Queue	ConnectionFactory (or TopicConnectionFactory) Topic

  A connection factory is used to create connections from the JMS provider to the messaging system, and encapsulates the configuration parameters needed to create connections.

• To improve performance, the application server pools connections and sessions with the JMS provider. You have to configure the connection and session pool properties appropriately for the applications, otherwise you might not get the connection and session behavior we want.

• Applications must not cache JMS connections, sessions, producers or consumers. WebSphere Application Server closes these objects when a bean or servlet completes, and so any attempt to use a cached object will fail with a javax.jms.IllegalStateException exception.

  To improve performance, applications can cache JMS objects that have been looked up from JNDI. For example, an EJB or servlet needs to look up a JMS ConnectionFactory only once, but it must call the createConnection method on each instantiation. Because of the effect of pooling on connections and sessions with the JMS provider, there should be no performance impact.

• A non-durable subscriber can only be used in the same transactional context (for example, a global transaction or an unspecified transaction context) that existed when the subscriber was created.

• Use durable subscriptions with the default messaging provider. A durable subscription on a JMS topic enables a subscriber to receive a copy of all messages published to that topic, even after periods of time when the subscriber is not connected to the server. Therefore, subscriber applications can operate disconnected from the server for long periods of time, and then reconnect to the server and process messages that were published during their absence. If an application creates a durable subscription, it is added to the runtime list that administrators can display and act on through the console.

  Each durable subscription is given a unique identifier, clientID##subName where:

  clientID

  The client identifier used to associate a connection and its objects with the messages maintained for applications (as clients of the JMS provider). You should use a naming convention that helps you identify the applications, in case we have to relate durable subscriptions to the associated applications for runtime administration.

  subName

  The subscription name used to uniquely identify a durable subscription within a given client identifier.

  For durable subscriptions created by message-driven beans, these values are set on the JMS activation specification. For other durable subscriptions, the client identifier is set on the JMS connection factory, and the subscription name is set by the application on the createDurableSubscriber operation.

  To create a durable subscription to a topic, an application uses the createDurableSubscriber operation defined in the JMS API:

  public TopicSubscriber createDurableSubscriber(Topic topic, java.lang.String subName, java.lang.String messageSelector, boolean noLocal)
                              throws JMSException

  topic

  The name of the JMS topic to subscribe to. This is the name of an object supporting the javax.jms.Topic interfaces, such as found by looking up a suitable JNDI entry.

  subName

  The name used to identify this subscription.

  messageSelector

  Only messages with properties matching the message selector expression are delivered to consumers. A value of null or an empty string indicates that all messages should be delivered.

  noLocal

  If set to true, this parameter prevents the delivery of messages published on the same connection as the durable subscriber.

  Applications can use a two argument form of the createDurableSubscriber operation that takes only topic and subName parameters. This alternative call directly invokes the four argument version shown previously, but sets messageSelector to null (so all messages are delivered) and sets noLocal to false (so messages published on the connection are delivered). For example, to create a durable subscription to the topic called myTopic, with the subscription name of mySubscription:

  session.createDurableSubscriber(myTopic,"mySubscription");

  If the createDurableSubscription operation fails, it throws a JMS exception that provides a message and linked exception to give more detail about the cause of the problem.

  To delete a durable subscription, an application uses the unsubscribe operation defined in the JMS API

  In normal operation there can be at most one active (connected) subscriber for a durable subscription at a time. However, the subscriber application can be running in a cloned application server, for failover and load balancing purposes. In this case the "one active subscriber" restriction is lifted to provide a shared durable subscription that can have multiple simultaneous consumers.

  For more information about application use of durable subscriptions, see the section "Using Durable Subscriptions" in the JMS specification.

• Decide what message selectors are needed. We can use the JMS message selector mechanism to select a subset of the messages on a queue so that this subset is returned by a receive call. The selector can refer to fields in the JMS message header and fields in the message properties.

• Acting on messages received. When a message is received, we can act on it as needed by the business logic of the application. Some general JMS actions are to check that the message is of the correct type and extract the content of the message. To extract the content from the body of the message, cast from the generic Message class (which is the declared return type of the receive methods) to the more specific subclass, such as TextMessage. It is good practice always to test the message class before casting, so that unexpected errors can be handled gracefully.

  In this example, the instanceof operator is used to check that the message received is of the TextMessage type. The message content is then extracted by casting to the TextMessage subclass.

         if ( inMessage instanceof TextMessage )
   ...
             String replyString = ((TextMessage) inMessage).getText();

• JMS applications using the default messaging provider can access, without any restrictions, the content of messages that have been received from WebSphere Application Server Version 5 embedded messaging or WebSphere MQ.

• JMS applications can access the full set of JMS_IBM* properties. These properties are of value to JMS applications that use resources provided by the default messaging provider, the V5 default messaging provider, or the WebSphere MQ provider.

  For messages handled by WebSphere MQ, the JMS_IBM* properties are mapped to equivalent WebSphere MQ Message Descriptor (MQMD) fields. For more information about the JMS_IBM* properties and MQMD fields, see the Use Java section of the WebSphere MQ information center.

• JMS applications can use report messages as a form of managed request/response processing, to give remote feedback to producers on the outcome of their send operations and the fate of their messages. JMS applications can request a full range of report options using JMS_IBM_Report_Xxxx message properties. For more information about using JMS report messages, see JMS report messages.

• JMS applications can use the JMS_IBM_Report_Discard_Msg property to control how a request message is disposed of if it cannot be delivered to the destination queue.

  MQRO_Dead_Letter_Queue

  This is the default. The request message should be written to the dead letter queue.

  MQRO_Discard

  The request message should be discarded. This is usually used in conjunction with MQRO_Exception_With_Full_Data to return an undeliverable request message to its sender.

• Use a listener to receive messages asynchronously. In a client, not in a servlet or enterprise bean, an alternative to making calls to QueueReceiver.receive() is to register a method that is called automatically when a suitable message is available; for example:

  ...
  MyClass listener =new MyClass();
  queueReceiver.setMessageListener(listener);
  //application continues with other application-specific behavior.
  ...

  When a message is available, it is retrieved by the onMessage() method on the listener object.

  import javax.jms.*;
  public class MyClass implements MessageListener
  {
  public void onMessage(Message message)
  {
  System.out.println("message is "+message);
  //application specific processing here
  ...
   }
  }

  For asynchronous message delivery, the application code cannot catch exceptions raised by failures to receive messages. This is because the application code does not make explicit calls to receive() methods. To cope with this situation, we can register an ExceptionListener, which is an instance of a class that implements the onException() method. When an error occurs, this method is called with the JMSException passed as its only parameter.

  For more details about using listeners to receive messages asynchronously, see the Java Message Service Documentation.

  An alternative to developing our own JMS listener class, we can use a message-driven bean, as described in Programming with message-driven beans.

• (zos) Take care when performing a JMS receive() from a server-side application component if that receive() invocation is waiting on a message produced by another application component that is deployed in the same server. Such a JMS receive() is synchronous, so blocks until the response message is received.

  This type of application design can lead to a consumer or producer problem where the entire set of work threads can be exhausted by the receiving component, which has been blocked waiting for responses, leaving no available worker thread for which to dispatch the application component that would generate the response JMS message. For example, a servlet and a message-driven bean are deployed in the same server. When this servlet dispatches a request it sends a message to a queue that is serviced by the message-driven bean (that is, messages produced by the servlet are consumed by the message-driven bean onMessage() method). The servlet subsequently issues a receive(), waiting for a reply on a temporary ReplyTo queue. The message-driven bean onMessage() method performs a database query and sends back a reply to the servlet on the temporary queue. If a large number of servlet requests occur at once (relative to the number of server worker threads), then all available server worker threads will probably be used to dispatch a servlet request, send a message, and wait for a reply. The application server then enters a condition where no threads remain to process any of the message-driven beans that are now pending. Therefore, because the responses that the servlets are waiting for are all blocked, the server hangs, which is likely lead to application failure.

  Possible solutions are:

  1. Ensure that the number of worker threads (# of threads per server region * # of server regions per server) exceeds the number of concurrent dispatches of the application component doing the receive() so that there is always a worker thread available to dispatch the message producing component.

  2. Use an application topology that places the receiver application component in a separate server from the producer application component. Although worker thread usage might still have to be carefully considered under such a deployment scenario, this separation ensures that there are always be threads that cannot be blocked by the message receiving component. There can be other interactions to consider, such as an application server that has multiple applications installed.

  3. Refactor the application to do the message receives from a client component, which will not compete with the producer component for worker threads. Furthermore, the client component can do asynchronous (non-blocking) receives, which are prohibited from J2EE servers. So, for example, the previous example application can be refactored to have a client sending messages to a queue and then waiting for a response from the MDB.

• To use authentication with WebSphere MQ or the Version 5 Embedded Messaging support, we cannot have user IDs longer than 12 characters. For example, the default Windows NT user ID, administrator, is not valid for use with WebSphere internal messaging, because it contains 13 characters.

• The following points, as defined in the EJB specification, apply to the use of flags on createxxxSession calls:

  • The transacted flag passed on createxxxSession is ignored inside a global transaction and all work is performed as part of the transaction. Outside of a transaction the transacted flag is used and, if set to true, the application should use session.commit() and session.rollback() to control the completion of the work. In an EJB2.0 module, if the transacted flag is set to true and outside of an XA transaction, then the session is involved in the WebSphere local transaction and the unresolved action attribute of the method applies to the JMS work if it is not committed or rolled back by the application.

  • Clients cannot use Message.acknowledge() to acknowledge messages. If a value of CLIENT_ACKNOWLEDGE is passed on the createxxxSession call, then messages are automatically acknowledged by the application server and Message.acknowledge() is not used.

• If we want the application to use WebSphere MQ as an external JMS provider, then send messages within a container-managed transaction.

  When you use WebSphere MQ as an external JMS provider, messages sent within a user-managed transaction can arrive before the transaction commits. This occurs only when you use WebSphere MQ as an external JMS provider, and you send messages to a WebSphere MQ queue within a user-managed transaction. The message arrives on the destination queue before the transaction commits.

  The cause of this problem is that the WebSphere MQ resource manager has not been enlisted in the user-managed transaction.

  The solution is to use a container-managed transaction.

Related concepts

JMS interfaces - explicit polling for messages

Related tasks

Develop an enterprise application to use JMS

Develop a JMS client

Deploy an enterprise application to use JMS

JMS interfaces
WebSphere MQ library

JMS report messages

JMS interfaces