Initialization procedure and general services codes (X'E8')

 

If an initialization procedures reason code occurs that is not listed here, an internal error has occurred. Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80001

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80002

Explanation:

The queue manager address space was not started correctly or an error occurred during z/OS IEFSSREQ processing.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested. Register 9 contains the address of an 8-byte field that contains the following diagnostic information:

• Bytes 1 through 4 - subsystem name

• Bytes 5 through 8 - contents of register 15 that contains the return code set by the z/OS IEFSSREQ macro

System Programmer Response:

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E80003, 00E80004, 00E80005, 00E80006

Explanation:

An internal error has occurred.

System Action:

A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E8000E

Explanation:

An ESTAE could not be established for the queue manager address space control task.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested. Register 9 contains the address of a 4-byte field that contains the ESTAE macro return code.

System Programmer Response:

Restart the queue manager.

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E8000F

Explanation:

Invalid startup parameters were specified. This was probably caused by an attempt to start the queue manager by som means other than a START QMGR command.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

If you are unable to resolve the problem, collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80011

Explanation:

The address space could not be made non-swappable.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E80012

Explanation:

An internal error has occurred.

System Programmer Response:

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80013, 00E8001F, 00E8002F

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80031

Explanation:

An unsupported input parameter was detected for allied address space initialization.

System Action:

The caller's task is ended abnormally. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80032

Explanation:

An unsupported input parameter was detected for allied address space termination.

System Action:

The caller's task is ended abnormally. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80033

Explanation:

This reason code accompanies a X'6C6' completion code. This module detected that the queue manager was terminating.

System Action:

The caller's task is ended abnormally with code X'6C6'. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E8003C

Explanation:

An internal error has occurred.

System Action:

The caller's task is ended abnormally. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E8003D

Explanation:

An internal error has occurred.

System Action:

Abnormal termination of the queue manager is initiated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E8003E

Explanation:

An ESTAE could not be established in an address space about to be initialized as an MQ allied address space.

System Action:

The caller's task is ended abnormally. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

If you are unable to resolve the problem, collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E8003F

Explanation:

An internal error has occurred.

System Action:

The caller's task is ended abnormally. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80041

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80042, 00E8004F

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80051

Explanation:

An error was detected in the command that was used to start the queue manager.

System Action:

The queue manager is terminated.

System Programmer Response:

Reenter the command if it was entered incorrectly.

If you are unable to resolve the problem, contact your IBM support center.

00E80052, 00E80053, 00E80054, 00E80055

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80057

Explanation:

An error occurred while trying to start a queue manager address space. A possible cause of this problem would be an error in the started task JCL procedure for the queue manager.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E80058

Explanation:

An error occurred during command prefix registration.

System Action:

The queue manager ends abnormally.

System Programmer Response:

See the accompanying CSQYxxx messages for information about the cause of the problem.

Restart the queue manager after correcting the problem.

00E8005F, 00E80061, 00E8006F, 00E8007F

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80081

Explanation:

An invalid load module was detected.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested. Register 9 contains the address of an 8-byte field that contains the name of the module in error.

System Programmer Response:

Check that the installation process was successful.

Restart the queue manager after resolving the problem.

If you are unable to resolve the problem, collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80084

Explanation:

A resource manager provided notification of an error during queue manager startup notification processing.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested. Register 9 contains the address of a 4-byte field that contains the RMID of the resource manager that requested queue manager termination.

System Programmer Response:

Look for error messages indicating the cause of the problem.

Restart the queue manager after resolving the problem.

If you are unable to solve the problem, collect the items listed in Initialization procedures problem determination, together with the contents of the BSDS and a GTF trace, and contact your IBM support center.

00E8008F, 00E80091, 00E8009F, 00E800AF, 00E800B1

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E800CE

Explanation:

An ESTAE could not be established.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested. Register 9 contains the address of a 4-byte field that contains the ESTAE macro return code.

System Programmer Response:

Restart the queue manager.

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E800D1

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E800D2

Explanation:

An error was encountered while attempting to obtain the z/OS LOCAL lock.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E800D3

Explanation:

An error was encountered while attempting to release the z/OS LOCAL lock.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E800DF

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80100

Explanation:

The queue manager was ended abnormally because the queue manager address space control task ESTAE was entered. This reason code is issued for all completion codes, except for the X'5C6' completion code.

The queue manager is unable to determine the cause of the error.

System Action:

Termination of the queue manager is initiated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager after resolving the problem.

The subcomponent that caused the error is unknown. This reason code might be returned if the queue manager is unable to find the system parameter load module you specified on the START QMGR command (the default name is CSQZPARM). Check that the module you specified is available.

This reason code is also issued if the queue manager is canceled by the z/OS command CANCEL. If this is the case, determine why the queue manager was canceled.

You might find the items listed in Initialization procedures problem determination, together with the contents of the BSDS and a GTF trace, useful in resolving the problem.

00E8011D

Explanation:

An internal error has occurred.

System Action:

Termination of queue manager is initiated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E8011E

Explanation:

The allied address space task primary ESTAE detected that the secondary ESTAE could not be established.

System Action:

Abnormal termination of allied address space is continued. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E8011F

Explanation:

The allied address space task primary ESTAE was entered without a subsystem diagnostic work area (SDWA) provided by z/OS RTM.

System Action:

Abnormal termination of the allied address space is continued. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E8012D

Explanation:

An internal error has occurred.

System Action:

Abnormal termination of queue manager is initiated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E8012F

Explanation:

The allied address space task secondary ESTAE was entered without a subsystem diagnostic work area (SDWA) provided by z/OS.

System Action:

Continue with the abnormal termination of the allied address space. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E80130

Explanation:

The FRR that protects the START QMGR/STOP QMGR command processor function was entered while a valid STOP QMGR command was being processed.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

You might find the items listed in Initialization procedures problem determination useful in resolving the problem.

00E80140

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80150, 00E80151

Explanation:

An invalid module was detected.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested. Register 9 contains the address of a 12-byte field that contains the following diagnostic information:

• Bytes 1 through 8 contain the name of the load module that contains the initialization entry point list with the invalid entry

System Programmer Response:

Restart the queue manager after resolving the problem.

Check that the installation process was successful. If you are unable to resolve the problem, collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E8015F

Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated. A record is written to SYS1.LOGREC, and an SVC dump is requested.

System Programmer Response:

Restart the queue manager.

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

00E80160

Explanation:

The queue manager initialization procedures found that a load module had an invalid AMODE or RMODE attribute.

System Action:

Queue manager startup is terminated.

System Programmer Response:

See message CSQY006E.

00E80161

Explanation:

The queue manager initialization procedures found that a load module was not at the correct level for the version of the queue manager that was being started.

System Action:

Queue manager startup is terminated.

System Programmer Response:

See message CSQY010E.

00E80162

Explanation:

The queue manager initialization procedures found that the storage protect key was not 7. The most likely cause is that the program properties table (PPT) entry for CSQYASCP has not been specified correctly.

System Action:

Queue manager startup is terminated.

System Programmer Response:

Restart the queue manager after resolving the problem.

See the WebSphere MQ for z/OS System Setup Guide for information about specifying the PPT entry for CSQYASCP.

00E80163

Explanation:

The queue manager initialization procedures found that they were not APF authorized. The most likely cause is that the MQ load libraries are not APF authorized.

System Action:

Queue manager startup is terminated.

System Programmer Response:

Restart the queue manager after resolving the problem.

See the WebSphere MQ for z/OS System Setup Guide for information about APF authorization for the MQ load libraries.

00E80170

Explanation:

An internal error has occurred.

System Action:

The request is ignored.

System Programmer Response:

Collect the items listed in Initialization procedures problem determination and contact your IBM support center.

 

Initialization procedures problem determination

Collect the following diagnostic items:

• Console output for the period leading up to the error

• Queue manager job log

• System dump resulting from the error, if any

• Printout of SYS1.LOGREC

• System parameter load module

• Initialization procedure

• Started task JCL procedure for this queue manager

• The WebSphere MQ, z/OS, DB2, CICS, and IMS service levels