URI is incomplete (<insert_0>): incorrect resource type.
Severity
20 : Error
Explanation
The resource type for the request has not been correctly specified in the URI.
Response
Specify a valid URI and resubmit. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0002E
URI is incomplete: missing destination agent name.
Severity
20 : Error
Explanation
The transfer cannot be started because the destination agent name parameter is missing, or specifies a blank agent name.
Response
Specify a valid destination agent name and resubmit the request. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0003E
URI is incomplete: missing destination directory/filename.
Severity
20 : Error
Explanation
The transfer cannot be started because no destination file or directory name has been specified.
Response
Specify a correct destination file or directory name and resubmit the transfer.
BFGWI0004E
URI is incomplete: missing resource ID or query string.
Severity
20 : Error
Explanation
The specified URI does not contain all the required resource identifiers.
Response
Update the URI to specify all the required resources for the request and resubmit. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0005E
URI is incomplete: missing destination agent queue manager.
Severity
20 : Error
Explanation
The transfer cannot be started because the destination agent queue manager parameter is missing, or specifies a blank agent queue manager.
Response
Specify a valid destination agent and destination queue mananger and resubmit the request. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0006E
File transfer request is incomplete: no files specified.
Severity
20 : Error
Explanation
No files were specified for the file transfer request.
Response
Specify at least one filename and its contents for the transfer request. Then resubmit the request.
BFGWI0007E
File transfer request is incomplete: one or more filenames is missing.
Severity
20 : Error
Explanation
Each file specified in the transfer request must have a filename specified as part of its Content-Disposition. One or more of the files requested for transfer is missing a filename specification or the specified filename is blank.
Response
Specify a non-blank filename for each file in the transfer request. If necessary consult the IBM MQ Managed File Transfer documentation. Then resubmit the request.
BFGWI0008E
Request body could not be parsed.
Severity
20 : Error
Explanation
The body of the HTTP request could not be parsed for some reason.
Response
Correct the request and resubmit. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0009E
The <insert_0> header or query parameter is invalid for resource <insert_1>
Severity
20 : Error
Explanation
The resource was specified with an unsupported header or query parameter.
Response
Correct the request and resubmit. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0010E
The <insert_0> header or query parameter is invalid for HTTP method <insert_1>.
Severity
20 : Error
Explanation
The HTTP method was specified with an invalid header or query parameter.
Response
Correct the request and resubmit. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0011E
The <insert_0> header or query parameter value of <insert_1> is invalid.
Severity
20 : Error
Explanation
The header or query parameter was specified with an invalid value.
Response
Correct the request and resubmit. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0012E
The <insert_0> header or query parameter value of <insert_1> is too long.
Severity
20 : Error
Explanation
The header or query parameter was specified with an invalid value that is too long.
Response
Correct the request and resubmit. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0013E
The <insert_0> header or query parameter has been specified multiple times.
Severity
20 : Error
Explanation
The header or query parameter was specified in the request multiple times, but the protocol requires the header to be specified only once.
Response
Correct the request and resubmit.
BFGWI0014E
User not authorized to perform the request.
Severity
20 : Error
Explanation
The request for a resource was made by an unauthorized user.
Response
If authorization is required contact the web application server administrator to grant access.
BFGWI0015E
The requested resource could not be found.
Severity
20 : Error
Explanation
The requested resource, such as a transfer via its identifier, could not be found.
Response
Update the request to specify a valid resource and retry.
BFGWI0016E
A <insert_0> HTTP method is not allowed for the <insert_1> resource request.
Severity
20 : Error
Explanation
A recognized resource request has been made, but it does not support the specified method.
Response
Update the request to specify a different resource or specify a HTTP method that is supported for the request.
BFGWI0017E
A request has been received with a media type which cannot be handled by IBM MQ Managed File Transfer.
Severity
20 : Error
Explanation
The request specified a media type not supported by IBM MQ Managed File Transfer. The only supported media types are: multipart/form-data, multipart/mixed and application/xml.
Response
Update the request to specify a supported media type and retry.
BFGWI0018E
The request could not be completed due to an internal web application server error.
Severity
20 : Error
Explanation
Whilst handling the request the web application server has encountered a problem.
Response
Contact the web application server administrator to investigate the problem.
BFGWI0019E
The request could not be completed for reasons due to a problem with the web application server.
Severity
20 : Error
Explanation
The request could not be completed for reasons that are beyond the control of the HTTP client of the IBM MQ Managed File Transfer web application. For example there is an internal configuration issue with the web application server.
Response
Contact the web application server administrator to investigate the problem.
BFGWI0020E
The destination is temporarily unavailable.
Severity
20 : Error
Explanation
The request cannot be processed because the web application server was unable to communicate with a required system. For example there is an internal MQ or database connectivity problem
Response
Either retry the request again or contact the web application server administrator to investigate the problem.
BFGWI0021E
An attempt to complete some part of the request has timed out, either because of time limits imposed by IBM MQ Managed File Transfer or time limits imposed by the HTTP client.
Severity
20 : Error
Explanation
The request was accepted by system but part of the processing has taken longer than imposed time limits.
Response
Either retry the request again or contact the web application server administrator to investigate the problem.
BFGWI0022E
The supplied transfer ID did not have a length of 48 characters. This is not a valid transfer ID.
Severity
20 : Error
Explanation
The transfer ID is an incorrect length.
Response
Check that you specified the correct transfer ID and resubmit the request.
BFGWI0023E
The supplied transfer ID contains characters that are not hexadecimal.
Severity
20 : Error
Explanation
The transfer ID is specified incorrectly.
Response
Check that you specified the correct transfer ID and resubmit the request.
BFGWI0024E
The transfer ID in the request is null.
Severity
20 : Error
Explanation
The transfer ID has not been supplied in the request.
Response
Check that you specified the transfer ID and resubmit the request.
BFGWI0025E
There is no transfer information for the specified transfer ID.
Severity
20 : Error
Explanation
The transfer ID specified in the request cannot be found in the database.
Response
Check that you specified the correct transfer ID and resubmit the request.
BFGWI0026E
The request contains a file that is too large to be handled by the server.
Severity
20 : Error
Explanation
The server was unable to process the request because the file being passed to it is too large.
Response
Specify a smaller file and resubmit the request.
BFGWI0027E
URI is incomplete (<insert_0>): missing destination type.
Severity
20 : Error
Explanation
The transfer cannot be started because the destination type is missing or invalid.
Response
Specify a valid destination type and resubmit the request. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0028E
A queue manager name was expected in the URI, but was not provided.
Severity
20 : Error
Explanation
The request cannot be processed because the agent's queue manager name was not provided. If the @ symbol is specified in the URI, this must be followed by a queue manager name.
Response
Specify the agent queue manager name after the @ symbol and resubmit the request. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0029E
URI is incomplete: missing file space name.
Severity
20 : Error
Explanation
The request cannot be processed because no file space name has been specified, or the specified file space name is blank.
Response
Specify a file space name and resubmit the request.
BFGWI0030E
URI is incomplete: missing file path for download of a file from a file space.
Severity
20 : Error
Explanation
The request cannot be processed because no file path has been specified, or the specified file path is blank.
Response
Specify a file path of a known file within the specified file space and resubmit the request.
BFGWI0031E
The requested resource is no longer available.
Severity
20 : Error
Explanation
The requested resource, such as a file on disk, referred to in a file transfer, could not be found. This might be due to the resource having been deleted.
Response
If the resource is still available, contact the web application server administrator to investigate the problem.
BFGWI0032E
The parameter ''<insert_0>'' is not valid.
Severity
20 : Error
Explanation
The parameter supplied by the user in the request is not valid. See the IBM MQ Managed File Transfer product documentation for valid parameters.
Response
Remove the invalid parameters and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0033E
Invalid value ''<insert_0>'' supplied for Start parameter.
Severity
20 : Error
Explanation
The value supplied by the user for the Start parameter in the request is not valid. See the IBM MQ Managed File Transfer product documentation for valid values.
Response
Edit the URI Start parameter and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0034E
Invalid value ''<insert_0>'' supplied for Count parameter.
Severity
20 : Error
Explanation
The value supplied by the user for the Count parameter in the request is not valid. See the IBM MQ Managed File Transfer product documentation for valid values.
Response
Edit the URI Count parameter and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0035E
Invalid value ''<insert_0>'' supplied for Sort parameter.
Severity
20 : Error
Explanation
The value supplied by the user for the Sort parameter in the request is not valid. See the IBM MQ Managed File Transfer product documentation for valid values.
Response
Edit the URI Sort parameter and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0036E
Invalid value ''<insert_0>'' supplied for SortBy parameter.
Severity
20 : Error
Explanation
The value supplied by the user for the SortBy parameter in the request is not valid. See the IBM MQ Managed File Transfer product documentation for valid values.
Response
Edit the URI SortBy parameter and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0037E
The URI specified contained a parameter multiple times.
Severity
20 : Error
Explanation
The URI specified contained a parameter multiple times. URI parameters can only be specified once.
Response
Remove the superfluous parameter from the URI and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0038E
The dates specified do not define a valid range.
Severity
20 : Error
Explanation
The dates specified do not define a valid range. Valid combinations are as follows: EndAfter must be a date before EndBefore, and StartAfter must be a date before StartBefore.
Response
Edit the URI date parameters and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0039E
The given value ''<insert_0>'' is not valid for the Accept parameter.
Severity
20 : Error
Explanation
Either 'xml' or 'json' is expected for the Accept parameter.
Response
Edit the URI accept parameter and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0040E
We cannot specify the parameter agent, and in the same URI specify a srcagent or destagent parameter.
Severity
20 : Error
Explanation
The parameter agent cannot be specified with srcagent or destagent parameters in the URI.
Response
Edit the URI to remove the invalid parameters and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0041E
The given value ''<insert_0>'' is not a valid status value.
Severity
20 : Error
Explanation
The given value is not a valid status value. Valid values are 'Complete', 'Started', 'Submitted' and 'Cancelled'.
Response
Edit the URI status parameter and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0042E
The given status value has not been specified correctly.
Severity
20 : Error
Explanation
The given status value has not been specified correctly.
Response
Edit the URI status parameter and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0043E
The given agent name is not valid.
Severity
20 : Error
Explanation
An agent name must not be longer then 28 characters, or contains characters that are not allowed.
Response
Edit the URI agent, srcagent or destagent parameter and resubmit the request. See the IBM MQ Managed File Transfer documentation for valid values.
BFGWI0044E
We cannot specify query parameters if we specify a transfer ID.
Severity
20 : Error
Explanation
A transfer ID must be specified without query parameters.
Response
Edit the URI to remove the query parameters and resubmit the request. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0045E
File space ''<insert_0>'' is not accessible to user ''<insert_1>'' or could not be found.
Severity
20 : Error
Explanation
The requested file space is either not accessible to the current user or does not exist.
Response
Specify an available file space that does exist and is accessible. If the file space needs to be created or made accessible then contact the web application server administrator to create the file space or grant access.
BFGWI0046E
URI contains unexpected additional data: <insert_0>
Severity
20 : Error
Explanation
The request cannot be processed because it contains additional data that was not expected.
Response
Remove the additional data and resubmit the request.
BFGWI0047E
File space ''<insert_0>'' already exists.
Severity
20 : Error
Explanation
The requested file space cannot be created because it already exists.
Response
Specify a different file space name and submit the request again.
BFGWI0048E
The HTTP entity body of the request, with a content type of ''<insert_0>'', could not be parsed due to: ''<insert_1>''.
Severity
20 : Error
Explanation
The HTTP entity body contained data that could not be parsed.
Response
Check the content of the entity body that you sent in the request, correct any errors and resubmit the request. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0049E
A JMS queue connection factory called ''<insert_0>'' has not been defined.
Severity
20 : Error
Explanation
A JMS queue connection factory is required to connect to the queue manager of the MQMFT web agent.
Response
Check a JMS queue connection factory called ''{0}'' has been defined in the application server, and that is has been defined in the correct scope for the MQMFT Web Gateway application. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0050I
No Web Gateway connection factory defined.
Severity
0 : Information
Explanation
A JMS queue connection factory has not been defined. Some operations of the Web Gateway may be restricted.
Response
If file transfer operations of the Web Gateway are required we must define a JMS queue connection factory called ''{0}'' on the application server. See the IBM MQ Managed File Transfer documentation for more information.
The coordinationQMgr property for the MQMFT Web Gateway has not been defined. Transfer log messages will not be produced by the MQMFT Web Gateway.
Response
Define the coordinationQMgr property for the MQMFT Web Gateway, if transfer log messages are required. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0052E
The request is missing the required body content.
Severity
20 : Error
Explanation
The body of the HTTP request was not specified and is required.
Response
Provide content in the body of our HTTP request and resubmit the request. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0053I
FTELOG: <insert_0> - <insert_1>. Requested by <insert_2> at <insert_3>. Information: <insert_4>
Severity
0 : Information
Explanation
File space administration information log message.
Response
None.
BFGWI0054E
Bad file space definition. The 'action' attribute has not been specified.
Severity
20 : Error
Explanation
When modifying an existing file space definition, the 'action' attribute must be specified on all 'authorized' and 'unauthorized' elements.
Response
Check the content of the entity body that you sent in the request, and ensure that the 'action' attribute has been specified with a valid value on all 'authorized' and 'unauthorized' elements. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0055I
FTELOG: <insert_0>. Requested by <insert_1> at <insert_2>. Information: <insert_3>
Severity
0 : Information
Explanation
User administration information log message.
Response
None.
BFGWI0056E
User <insert_0> is not permitted to access the system due to an MQMD user identifier not being available.
Severity
20 : Error
Explanation
All requests that require access to the MQMFT agent for the MQMFT Web Gateway require an MQMD user identifier to be defined. The Web Gateway maps the requesting user identifier to an MQMD user identifier by first attempting to look up a value set by the Web Gateway's system administrator. If no value is defined for the user then the Web Gateway's default value is used. If a default is not defined for the Web Gateway then this error will be reported.
Response
Contact your MQMFT Web Gateway system administrator to request an MQMD user identifier to be defined for the user identifier.
BFGWI0057E
File upload temporary directory invalid.
Severity
20 : Error
Explanation
File upload temporary directory {0} cannot be used by the MQMFT Web Gateway.
Response
Check that the file upload temporary directory exists and the application server has authority to read and write to the directory. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0058I
File upload temporary directory has not been cleaned.
Severity
0 : Information
Explanation
The file upload temporary directory used by the MQMFT Web Gateway to store temporary files during file upload has not been cleaned because it cannot be found.
Response
None.
BFGWI0059E
Maximum upload user quota ''<insert_0>'' is invalid.
Severity
20 : Error
Explanation
The value set for the MQMFT Web Gateway configuration parameter 'maxTempFileUploadSpace' is invalid.
Response
Check the value set for the MQMFT Web Gateway configuration parameter 'maxTempFileUploadSpace'. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0060E
The file space ''<insert_0>'' is currently in use, and cannot be deleted.
Severity
20 : Error
Explanation
A transfer is currently in progress for the file space and therefore cannot be deleted.
Response
Ensure that no transfers are currently using the file space and resubmit the request.
BFGWI0061E
We must specify exactly one 'filespace' element in a POST request.
Severity
20 : Error
Explanation
A request containing more than one 'filespace' element in the body has been received and cannot be processed.
Response
Edit the body of the request to contain a single 'filespace' element and resubmit your request. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0062E
The Web Gateway name property 'webGatewayName' has not been defined for the Web Gateway Application.
Severity
20 : Error
Explanation
The 'webGatewayName' property was not assigned a value when the Web Gateway Application was deployed. This property must be supplied for the Web Gateway to operate correctly.
Response
Update or re-deploy the Web Gateway Application and specify a value for the 'webGatewayName' property. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0063E
Invalid value for the ''webGatewayName'' property: <insert_0>
Severity
20 : Error
Explanation
The specified value for the 'webGatewayName' property of the Web Gateway application is not valid. Valid values for this property name must be between 1 and 28 characters in length and be alphanumeric or use the period (.) or underscore (_) characters. The Web Gateway application will not operate correctly unless a valid value is specified for this property.
Response
Update or redeploy the Web Gateway application and specify a valid value for the 'webGatewayName' property. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0064E
The ''<insert_0>'' header is not valid in this context.
Severity
20 : Error
Explanation
The specified header is only valid in a request if the 'type' value of the 'x-fte-postdest' header is set to 'executable'.
Response
Remove the specified header from the request or set the 'type' value in the 'x-fte-postdest' header to 'executable'. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0065E
The value of the 'x-fte-postdest' header is invalid.
Severity
20 : Error
Explanation
The 'command' attribute has not been set on the 'x-fte-postdest' header.
Response
Set the 'command' attribute on the 'x-fte-postdest' header. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0066E
The ''<insert_0>'' header is not valid in this context.
Severity
20 : Error
Explanation
The specified header is only valid in a request if the 'x-fte-postdest' header has also been set.
Response
Remove the specified header from the request or set the 'x-fte-postdest' header. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0067E
The ''<insert_0>'' header is not valid in this context.
Severity
20 : Error
Explanation
The specified header is only valid in a request if the 'type' value of the 'x-fte-postdest' header is set to 'antscript'.
Response
Remove the specified header from the request or set the 'type' value in the 'x-fte-postdest' header to 'antscript'. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0068E
The Web Gateway coordination queue manager property 'coordinationQMgr' has not been defined for the Web Gateway application.
Severity
20 : Error
Explanation
The 'coordinationQMgr' property was not assigned a value when the Web Gateway application was deployed. This property must be supplied for the Web Gateway to operate correctly.
Response
Update or redeploy the Web Gateway Application and specify a value for the 'coordinationQMgr' property. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0069E
Invalid value for the ''coordinationQMgr'' property: <insert_0>
Severity
20 : Error
Explanation
The specified value for the 'coordinationQMgr' property of the Web Gateway application is not valid. Valid values for this property name are between 1 and 48 characters in length and contain alphanumeric characters or the period (.), underscore (_), percent (%) or forward slash (/) characters. The Web Gateway application will not operate correctly unless a valid value is specified for this property.
Response
Update or redeploy the Web Gateway application and specify a valid value for the 'coordinationQMgr' property. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0070E
The Web Gateway agent name property 'agentName' has not been defined for the Web Gateway application.
Severity
20 : Error
Explanation
The 'agentName' property was not assigned a value when the Web Gateway application was deployed. This property must be supplied for the Web Gateway to operate correctly.
Response
Update or redeploy the Web Gateway application and specify a value for the 'agentName' property. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0071E
Invalid value for the ''agentName'' property: <insert_0>
Severity
20 : Error
Explanation
The specified value for the 'agentName' property of the Web Gateway application is not valid. Valid values for this property name are between 1 and 28 characters in length and contain alphanumeric characters or the period (.), underscore (_) or percent (%) characters. The Web Gateway application will not operate correctly unless a valid value is specified for this property.
Response
Update or redeploy the Web Gateway application and specify a valid value for the 'agentName' property. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0072E
Multiple values found for form field: <insert_0>
Severity
20 : Error
Explanation
The specified form field has multiple values defined in the request. Only the 'metadata' form field can be defined more than once in a request.
Response
Modify the HTML form used to submit the request so that only the field name given in the error message is defined only once.
BFGWI0073E
The ''<insert_0>'' form field is not valid in this context.
Severity
20 : Error
Explanation
The specified form field is only valid in a request if the 'type' value of the 'postdest' form field is set to 'executable'.
Response
Remove the specified form field from the request or set the 'type' value in the 'postdest' form field to 'executable'. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0074E
The value of the 'postdest' form field is invalid.
Severity
20 : Error
Explanation
The 'command' attribute has not been set on the 'postdest' form field.
Response
Set the 'command' attribute on the 'postdest' form field. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0075E
The ''<insert_0>'' form field is not valid in this context.
Severity
20 : Error
Explanation
The specified form field is only valid in a request if the 'postdest' form field has also been set.
Response
Remove the specified form field from the request or set the 'postdest' form field. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0076E
The ''<insert_0>'' form field is not valid in this context.
Severity
20 : Error
Explanation
The specified form field is only valid in a request if the 'type' value of the 'postdest' form field is set to 'antscript'.
Response
Remove the specified form field from the request or set the 'type' value in the 'postdest' form field to 'antscript'. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0077E
The <insert_0> form field value of <insert_1> is invalid.
Severity
20 : Error
Explanation
The form field was specified with an invalid value.
Response
Correct the request and resubmit. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0078E
The directory path <insert_0> does not exist.
Severity
20 : Error
Explanation
The specified directory path for storage of files does not exist.
Response
Create the directory and ensure the Web Gateway application has permission to create and remove files, then repeat this test.
BFGWI0079E
The Web Gateway application does not have read permission for directory path <insert_0>.
Severity
20 : Error
Explanation
The Web Gateway application is not able to read the contents of the named directory. The application needs to be able to read this directory to perform transfer operations.
Response
Review the permissions on the directory and ensure that the Web Gateway application has read access before retesting.
BFGWI0080E
The Web Gateway application does not have write permission for directory path <insert_0>.
Severity
20 : Error
Explanation
The Web Gateway application is not able to write to the named directory. The application needs to be able to write files in this directory to perform transfer operations.
Response
Review the permissions on the directory and ensure that the Web Gateway application has write access before retesting.
BFGWI0081E
The Web Gateway application is unable to create a unique file in directory <insert_0>.
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it attempts to find a file name which does not already exist. The application was unable to find a suitable file name.
Response
Investigate why there appear to be no available file names before retesting.
BFGWI0082E
The Web Gateway application was not able to create the sample test file <insert_0> because of the following exception: <insert_1>
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it attempts to create a new file with a unique name. The application could not create the file for the given reason.
Response
Review the given reason and make any necessary changes before retesting.
BFGWI0083E
The Web Gateway application was not able to write to the sample test file <insert_0> because of the following exception: <insert_1>
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it attempts to write to a sample test file. The application could not write to the file for the given reason.
Response
Review the given reason and make any necessary changes before retesting.
BFGWI0084E
The Web Gateway application was not able to complete writing to a sample test file <insert_0> because of the following exception: <insert_1>
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it attempts to write to a sample test file. The application was not able to complete writing to the file for the given reason.
Response
Review the given reason and resolve the problem as necessary before retesting.
BFGWI0085E
The Web Gateway application could not read the sample file <insert_0> that it previously created. The sample file has a size of <insert_2>, which does not match the expected file size of <insert_1>.
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it creates a sample file of a known size and then attempts to read the file again. The application could not complete this test because the written file has a different size to the file that was read.
Response
Investigate why the file system is changing the size of the sample test file, and retest.
BFGWI0086E
The Web Gateway application could not read the sample file that it previously created, because the contents of the file have changed.
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it creates a sample file with known contents. The application could not complete this test because the contents of the written file do not match the expected contents.
Response
Investigate why the file system is changing the contents of the sample test file, and retest.
BFGWI0087E
The Web Gateway application could not read the sample file <insert_0> that it previously created because of the following exception: <insert_1>
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it creates a sample file and then attempts to read the file again. The application could not complete this test because the created file no longer exists.
Response
Investigate why the file system is reporting the test file as missing, and retest.
BFGWI0088E
The Web Gateway application could not read the contents of the sample file <insert_0> due to the following exception: <insert_1>
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test it creates a sample file and then attempts to read the file again. The application could not complete this test because it did not have permission to read the file contents.
Response
Investigate why the file system is not allowing the application to read the sample test file.
BFGWI0089E
The Web Gateway application could not complete reading the contents of the sample file <insert_0> due to the following exception: <insert_1>
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it creates a sample file and then attempts to read the file again. The application could not complete this test because it could not complete reading the contents.
Response
Investigate why the file system is not allowing the application to complete reading the sample test file.
BFGWI0090E
The Web Gateway application could not delete the created sample file <insert_0> due to the following exception: <insert_1>
Severity
20 : Error
Explanation
When the Web Gateway application performs an installation verification test, it creates a sample file and, on completion of the test, attempts to delete this file. The application could not complete the test because it was unable to delete the test file.
Response
Investigate why the file system is not allowing the application to delete the sample test file.
BFGWI0091E
Internal error. There was a request to perform an invalid test on testlet <insert_0>.
Severity
20 : Error
Explanation
The Web Gateway application has an internal configuration error. The installation verification test is attempting to perform an unknown test.
Response
Investigate whether any of the configuration files are corrupted before retesting.
BFGWI0092E
The Web Gateway application could not complete the database check due to the following exception: <insert_0>. The problem occurred while attempting to access the Web Gateway file space database and requires investigation.
Severity
20 : Error
Explanation
The Web Gateway application has successfully completed a number of database checks, but could not successfully access the Web Gateway file space database.
Response
Investigate the reasons for this failure. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0093E
The Web Gateway application could not complete the database check due to the following exception: <insert_0>. The problem occurred while attempting to access the Web Gateway file space database and requires investigation.
Severity
20 : Error
Explanation
The Web Gateway application has successfully completed a number of database checks, but could not successfully access the Web Gateway file space database.
Response
Investigate the reasons for this failure. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0094E
The Web Gateway application could not start the database check because accessing the context of <insert_0> generated the following exception: <insert_1>.
Severity
20 : Error
Explanation
The Web Gateway application could not start the database checks due to a problem in accessing the context.
Response
Investigate the reasons for this failure. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0095E
The Web Gateway application detected a missing table <insert_1> or incorrect schema <insert_3> in context <insert_0>. The following exception was produced while attempting to access the database: <insert_2>
Severity
20 : Error
Explanation
The Web Gateway application detected a problem while attempting to check that a database schema and table both exist.
Response
If the schema value is incorrect, then use the information about the Web Gateway installation verification application in the IBM MQ Managed File Transfer documentation to define the correct schema value. Otherwise investigate the reasons for this failure and consult the IBM MQ Managed File Transfer documentation for further assistance.
BFGWI0096E
The Web Gateway application detected a missing table <insert_0> in context <insert_1>. The following exception was produced while attempting to access the database: <insert_2>
Severity
20 : Error
Explanation
The Web Gateway application detected a problem while attempting to check that a database table exists.
Response
Investigate the reasons for this failure. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0097E
The Web Gateway application could not complete the database check due to the following exception: <insert_0>. The problem occurred while attempting to access the Web Gateway file space database and requires investigation.
Severity
20 : Error
Explanation
The Web Gateway application has successfully completed a number of database checks, but could not successfully access the Web Gateway file space database.
Response
Investigate the reasons for this failure. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0098E
The Web Gateway application could not complete the database check due to the following exception: <insert_0>. The problem occurred while trying to access the database and requires investigation.
Severity
20 : Error
Explanation
The Web Gateway application has successfully completed a number of database checks, but could not complete a logger JPA access check.
Response
Investigate the reasons for this failure. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0099E
Not authorized to perform this test.
Severity
20 : Error
Explanation
The Web Gateway application has received a request to perform a installation verification. However the user does not have the necessary authority to perform this test.
Response
Check the permissions associated with the user ID. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0100E
The Web Gateway application has been asked to perform an unknown test named <insert_0>.
Severity
20 : Error
Explanation
The Web Gateway application has receive a request to perform a installation verification. However the provided test name is unknown and so the test cannot be performed.
Response
Check any changes to configuration. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0101E
No user identifier present to determine the required file space name.
Severity
20 : Error
Explanation
When a request for a file space is made, if the name is not specified then it is derived from the user identifier making the request. If no user identifier was specified for the request, then the file space name cannot be determined. For an application server that has been secured correctly this error will not occur because all requests for file space access are checked to ensure they originate from an authorized user.
Response
Ensure the Web Gateway is secured so that anonymous requests cannot be made. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0102E
No user identifier present to determine the MQMD user identifier.
Severity
20 : Error
Explanation
When a request is made the identifier of the user making the request is used to look up an MQMD user identifier. If no user identifier was specified for the request and there is no default MQMD user identifier defined for the Web Gateway then the request will fail. For an application server that has been secured correctly this error will not occur because all requests for file space access are checked to ensure they originate from an authorized user.
Response
Ensure the Web Gateway is secured so that anonymous requests cannot be made. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0103E
The user authority ''<insert_0>'' specified for the file space ''<insert_1>'' is invalid.
Severity
20 : Error
Explanation
User names can be set as absolute user names or as regular expressions. The user value specified contains characters which are not valid.
Response
Ensure that the user names specified for the file space contain valid characters and resubmit the request.
BFGWI0104E
Value ''<insert_0>'' for the defaultMQMDUserID property is too long.
Severity
20 : Error
Explanation
The specified value for the 'defaultMQMDUserID' property of the Web Gateway application is not valid. If this property is set its value must be between 1 and 12 characters in length.
Response
Update or redeploy the Web Gateway application and specify a valid value for the 'defaultMQMDUserID' property. See the IBM MQ Managed File Transfer documentation for more information.
BFGWI0105E
URI is not valid: the file space name ''<insert_0>'' contains unsupported characters.
Severity
20 : Error
Explanation
The request cannot be processed because the file space name contains characters which are not permitted.
Response
Consult the IBM MQ Managed File Transfer documentation and resubmit the command, specifying a file space name that only contains supported characters.
BFGWI0106E
The remote HTTP client application disconnected before the download request could be completed.
Severity
20 : Error
Explanation
A remote HTTP client started downloading a file, but disconnected before the file was received.
Response
Ask the remote user to retry their request again if the file is required.
BFGWI0107E
The Web Gateway application attempted to communicate with the database through the connection <insert_0>. The following exception was produced: <insert_1>
Severity
20 : Error
Explanation
The Web Gateway application failed to communicate with the named database connection.
Response
Investigate the reasons for this failure. If necessary consult the IBM MQ Managed File Transfer documentation.
BFGWI0108E
The following exception was caught during servlet initialization : <insert_0>
Severity
20 : Error
Explanation
A servlet exception was detected during initialization. The servlet will continue to start.
Response
Investigate the reasons for the exception and correct as necessary before restarting the servlet.
BFGWI0109E
The following IOException was caught handling an uploaded file <insert_0>: <insert_1>
Severity
20 : Error
Explanation
An IOException was detected while handling an uploaded file. The file might not have been written to the file system correctly.
Response
Investigate the reasons for the exception and correct as necessary before submitting another file upload request. Check that the temporary file upload location for the Web Gateway has enough disk space, and that the correct file system permissions have been configured for the application server user.
BFGWI0110E
The following IOException was caught handling an uploaded file <insert_0>: <insert_1>
Severity
20 : Error
Explanation
An IOException was detected while handling an uploaded file. The file might not have been written to the file system correctly.
Response
Investigate the reasons for the exception and correct as necessary before submitting another file upload request. Check that the temporary file upload location for the Web Gateway has enough disk space, and that the correct file system permissions have been configured for the application server user.
BFGWI0111E
The following IOException was caught handling an uploaded file <insert_0>: <insert_1>
Severity
20 : Error
Explanation
An IOException was detected while handling an uploaded file. The file might not have been deleted from the file system correctly.
Response
Investigate the reasons for the exception and correct as necessary before submitting another file upload request. Check that the correct file system permissions have been configured for the application server user.
BFGWI0112E
The following IOException was caught handling an uploaded file <insert_0>: <insert_1>
Severity
20 : Error
Explanation
An IOException was detected while handling an uploaded file. The file might not have been deleted from the file system correctly.
Response
Investigate the reasons for the exception and correct as necessary before submitting another file upload request. Check that the correct file system permissions have been configured for the application server user.
BFGWI0113E
CSRF protection is enabled on the Web Gateway and the request did not specify the 'x-fte-csrf-token' HTTP header or 'csrf-token' HTML form property.
Severity
20 : Error
Explanation
When CSRF protection is enabled, the Web Gateway requires requests to provide the value of the JSESSIONID as an HTTP header or HTML form property.
Response
Add the 'x-fte-csrf-token' header to the HTTP request or add the 'csrf-token' to the HTML form. Resubmit the request.
BFGWI0114E
CSRF protection is enabled on the Web Gateway and the value of the 'x-fte-csrf-token' header or 'csrf-token' HTML form property does not match the expected value.
Severity
20 : Error
Explanation
When CSRF protection is enabled, the Web Gateway requires requests to provide the value of the JSESSIONID as an HTTP header or HTML form property.
Response
Ensure that the value specified for the 'x-fte-csrf-token' header on the HTTP request, or the value of the 'csrf-token' specified in the HTML form request, matches the value of the JSESSIONID for this session. Resubmit the request.
BFGWI0115E
The <insert_0> (current) and <insert_1> (old or deprecated name) headers have both been specified.
Severity
20 : Error
Explanation
The request contains headers for both the current name and the old or deprecated name for a header. We can specify only one.
Response
Correct the request and resubmit.
BFGWI0116E
The Web Gateway cannot process the transfer request because an insufficient level of security has been configured.
Severity
20 : Error
Explanation
The Web Gateway requires that JEE application security is enabled on the Application Server where it is installed. The transfer cannot be started.
Response
Enable JEE application security on the Application Server and restart the Application Server.
BFGWI9999E
<insert_0>
Severity
20 : Error
Explanation
If this message does not give enough information, check the accompanying error messages for further information.
Response
For further information on resolving this error, see the problem determination information on the product Web site.