An internal error has occurred. An attempt to generate a session where the end point has not been initialised.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0002E
Protocol driver <insert_0> cannot be located.
Severity
20 : Error
Explanation
The given protocol driver cannot be located and is required to connect to the selected server.
Response
Review any class path changes that have occurred and ensure the relevant protocol bridge driver has been included.
BFGBR0003E
Protocol driver <insert_0> is not supported.
Severity
20 : Error
Explanation
A request to connect to a server with a protocol driver which is not supported on this protocol bridge.
Response
Review the properties of this agent to ensure the correct protocol driver has been configured.
BFGBR0004E
3rd Party protocol driver libraries for <insert_0> cannot be located.
Severity
20 : Error
Explanation
The required 3rd party protocol driver libraries cannot be located and are required to connect to the selected server
Response
Review any class path changes that have occurred and ensure the relevant protocol bridge driver has been included.
BFGBR0005E
Attempt to connect to host <insert_0> has failed. Additional information <insert_1>
Severity
20 : Error
Explanation
Protocol bridge attempted to connect to a host machine, but failed.
Response
Check that the named host machine is available.
BFGBR0007E
While attempting to disconnect from the server the following exception was reported <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0008E
Attempts to connect to the server host ''<insert_0>'' on port <insert_1> were rejected with the following response: ''<insert_2>''.
Severity
20 : Error
Explanation
The protocol bridge failed to connect to the server and therefore cannot process any transfer requests.
Response
Verify the agent properties are correct and that the server is operation and listening on the expected port.
BFGBR0009E
Protocol IO exception has occurred. Exception: <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0010E
Creation of a session has failed due to the maximum number of concurrent sessions (<insert_0>) has been reached.
Severity
20 : Error
Explanation
The maximum number of concurrent sessions has been reached. As a result this transfer has been failed.
Response
Review the agent properties to ensure that the properties maxDestinationTransfer and maxSourcetransfer do not exceed the maximum number sessions for the protocol bridge.
BFGBR0011E
An invalid integer property of <insert_1> from property <insert_0> has been detected.
Severity
20 : Error
Explanation
An agent property that is expected to have an integer value, had a value which cannot be read as an integer value.
Response
Review the agent properties and ensure the property value is an integer.
BFGBR0012E
Protocol bridge configuration property ''<insert_0>'' is a mandatory property but is missing in the agents property file.
Severity
20 : Error
Explanation
The protocol bridge attempted to valid a mandatory property but could not locate it in the agent properties.
Response
Append the missing property to the agent's property file.
BFGBR0013E
Protocol bridge configuration property ''<insert_0>'' is a mandatory property but is missing in the agents property file.
Severity
20 : Error
Explanation
The protocol bridge attempted to valid a mandatory property but could not locate it in the agent properties.
Response
Append the missing property to the agent's property file.
BFGBR0014E
The private key for <insert_0> is in an invalid format
Severity
20 : Error
Explanation
The protocol bridge could not read the property of a private key as it was in the wrong format. The format is expected to be two hex digits followed by a space.
Response
Review the private key in the agent properties and ensure it has the correct format.
BFGBR0016E
A duplicate protocol driver name has been detected in the agent properties
Severity
20 : Error
Explanation
The agent properties contains a protocol driver reference which has already been defined.
Response
Review the agent properties and ensure all protocol driver names are unique and do not match any of the pre-defined protocol drivers.
BFGBR0017E
The protocol driver named <insert_0> is not defined.
Severity
20 : Error
Explanation
The protocol driver given is not one of the pre-defined drivers supported by the protocol bridge or it has not been defined within the agent properties.
Response
Review the protocol driver name in the agent properties and ensure it matches one of the supported names.
BFGBR0018E
The protocol driver package <insert_0> cannot be located.
Severity
20 : Error
Explanation
The given protocol driver has been defined as supported. However the package cannot be located on the class path.
Response
Review the protocol driver package and the class path to ensure that the protocol driver package and class is on the class path.
BFGBR0019E
The protocol driver package <insert_0> has reported a security exception of <insert_1>
Severity
20 : Error
Explanation
The protocol driver cannot be access due to a security problem.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0020E
The protocol driver package <insert_0> does not have the correct constructor for creating the necessary instance.
Severity
20 : Error
Explanation
The given protocol driver cannot interface with the protocol bridge.
Response
Check that a supported protocol driver has been specified in the agent properties.
BFGBR0021E
The protocol driver package <insert_0> has report an exception of <insert_1>
Severity
20 : Error
Explanation
The given protocol driver cannot interface with protocol bridge.
Response
Check that a supported protocol driver has been specified in the agent properties.
BFGBR0022E
The protocol driver has reported an exception of <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0023E
The protocol server ''<insert_1>'' has rejected authentication with user ID <insert_0>.
Severity
20 : Error
Explanation
The protocol bridge failed to connect to the server as the authentication given was rejected.
Response
Review the authentication parameters for the server in the ProtocolBridgeCredentials.xml file.
BFGBR0024E
Attempt to change directory to <insert_0> on the server has failed.
Severity
20 : Error
Explanation
The protocol driver failed to change directory on the connected server as the requested was rejected by that server.
Response
Review the original transfer request and ensure file path names are validate for the server.
BFGBR0025W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0026E
Attempt to delete file <insert_0> from the connected server has failed.
Severity
20 : Error
Explanation
The protocol driver failed to a delete a file as the requested was rejected by the server.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0027W
The server has terminated the connection with exception <insert_1> while transferring <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0028E
Attempt to read file <insert_0> from the server has failed
Severity
20 : Error
Explanation
The protocol driver failed to a get of a file as the request was rejected by the server.
Response
Review the original transfer request and ensure file path names are validate for the server.
BFGBR0029E
The protocol driver failed to create a local file <insert_0> Exception: <insert_1>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0030W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0031W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0032E
Attempt to read file <insert_0> from the protocol file server has failed with server error <insert_1>
Severity
20 : Error
Explanation
The protocol driver failed to get of a file as the request was rejected by the server.
Response
Review the original transfer request and ensure file path names are valid for the server.
BFGBR0033W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0034E
Attempt to create directory <insert_0> of the connected server has failed.
Severity
20 : Error
Explanation
The protocol driver failed to create a directory as the request was rejected by the server.
Response
Check that authentication the protocol bridge uses has permission for creating directories on the server.
BFGBR0035W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0036E
Attempt to write file <insert_0> on the server has failed
Severity
20 : Error
Explanation
The protocol driver requested to write a file to the connected server was rejected.
Response
Review the original transfer request and ensure file path names are validate for the server.
BFGBR0037E
The protocol driver failed to read file <insert_0> Exception: <insert_1>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0038W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection
BFGBR0039E
Attempt to write file <insert_0> on the server has failed with server error ''<insert_1>''
Severity
20 : Error
Explanation
The protocol driver failed to write a file as the request was rejected by the server.
Response
Review the original transfer request and ensure file path names are valid for the server.
BFGBR0040W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0041E
Attempt to rename file <insert_0> to <insert_1> has been rejected by the server.
Severity
20 : Error
Explanation
The protocol driver failed to perform a rename of a file as the request was rejected by the server.
Response
Check that the protocol bridge has permissions to perform rename of files on the server.
BFGBR0042W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0043E
The protocol driver cannot translate file type <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0044E
The timezone of <insert_0> is not a valid timezone
Severity
20 : Error
Explanation
The timezone property specified for the protocol bridge is invalid.
Response
Review the timezone property in the agent properties file.
BFGBR0045E
The platform of <insert_0> is not a supported platform for protocol bridge
Severity
20 : Error
Explanation
The protocol bridge is being executed on a platform which is not supported.
Response
Review the platform type and ensure it is one of the supported platforms for protocol bridge.
BFGBR0046E
The server platform type of <insert_0> is not known
Severity
20 : Error
Explanation
The agent properties has defined the server with an unknown platform type.
Response
Review the agent properties and ensure the server platform type is one of those supported.
BFGBR0047E
The language of <insert_0> is not a valid language
Severity
20 : Error
Explanation
The language property specified for the protocol bridge is invalid.
Response
Review the language property in the agent properties file.
BFGBR0048E
Attempted to redefine 3rd party driver when not in unit test mode.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0049E
Attempt to append to file <insert_0> on the server has failed with server error ''<insert_1>''
Severity
20 : Error
Explanation
The protocol driver request to append to a file on the server has been rejected.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0050W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection and connection
BFGBR0051E
One or more protocol bridge configuration errors have been detected. The protocol bridge cannot be started.
Severity
20 : Error
Explanation
The protocol bridge attempted to validate its configuration properties and one or more of the mandatory properties are either not present or have invalid values.
Response
Review the previous messages logged and correct as necessary.
BFGBR0052E
Protocol bridge configuration property ''<insert_0>'' is a mandatory property but is missing in the agents property file.
Severity
20 : Error
Explanation
The protocol bridge attempted to valid a mandatory property but could not locate it in the agent properties.
Response
Append the missing property to the agent's property file.
BFGBR0053E
Protocol bridge configuration property ''protocolBridgeMonthShortNames'' has an incorrect format of <insert_0>.
Severity
20 : Error
Explanation
The Protocol bridge property protocolBridgeMonthShortNames has an incorrectly formatted value.
Response
Review the property and ensure twelve month names separator by | has been specified.
BFGBR0054E
A property <insert_0> has an invalid integer value of <insert_1>
Severity
20 : Error
Explanation
Bridge attempted to define the upper limit of the number of sessions that can be opened. This is based on a number of agent properties, one of these is an invalid integer.
Response
Review the agent properties and correct the name property..
BFGBR0055E
Attempt to map file path <insert_0> for user ID <insert_1> has failed.
Severity
20 : Error
Explanation
The file path specified in the MQMFT transfer request could not be translated to a protocol server file path.
Response
Review the file path in the associated MQMFT transfer request.
BFGBR0057E
The server has terminated the connection. Exception: <insert_0>
Severity
20 : Error
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0058E
Internal error: Attempt to perform an unsupported action of <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0062E
An internal error has occurred. Request for session container for transfer Id <insert_0> occurred when it is not present.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0063E
An internal error has occurred. Request for a duplicate container for transfer Id <insert_0> occurred when already present.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0064W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection
BFGBR0065E
An internal error has occurred when attempting discover the current remote working directory. Server reply code <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0066W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection
BFGBR0069E
The transfer failed because <insert_0>.
Severity
20 : Error
Explanation
Protocol bridge was not able to perform the transfer due to an interaction problem with the server. The description included with highlight the problem area.
Response
The additional information within the message will indicate to where the server problem is. Review this information and investigate.
BFGBR0080W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0081E
The property "protocolBridgeListFileRecentDateFormat" has an invalid date format of <insert_0>
Severity
20 : Error
Explanation
The protocol bridge property defining the recent date form is not valid and cannot be used.
Response
Review the property and update as necessary.
BFGBR0082E
The property "protocolBridgeListFileOldDateFormat" has an invalid date format of <insert_0>
Severity
20 : Error
Explanation
The protocol bridge property defining the recent date form is not valid and cannot be used.
Response
Review the property and update as necessary.
BFGBR0083E
An internal error has occurred. Attempting to close pending command when one is not present.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0084E
An internal error has occurred. Incorrect closing stream reply code of <insert_0> has been detected.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0085E
The protocol bridge default credential mapping function failed to initialize. The protocol bridge agent will be stopped.
Severity
20 : Error
Explanation
When no protocol bridge credential user exits are defined, it is mandatory for the default credential mapping function to be successfully initialized so that a protocol bridge agent can start.
Response
Check the agent event log for any errors relating to the initialization of the default credential mapping function. For further information on the protocol bridge default credential mapping function, refer to the product documentation online at: http://publib.boulder.ibm.com/infocenter/wmqfte/v7r0/.
BFGBR0086E
The following list of protocol bridge credential exits failed to initialize: ''<insert_0>''. The protocol bridge agent will be stopped.
Severity
20 : Error
Explanation
It is mandatory for all of the configured protocol bridge credential exits to be successfully initialized for a protocol bridge agent to start.
Response
Check the agent event log for any errors relating to the initialization of the protocol bridge credential exits. If the product supplied protocol bridge credential exit has failed, refer to the product documentation online at: http://publib.boulder.ibm.com/infocenter/wmqfte/v7r0/.
BFGBR0087E
The user ''<insert_0>'' has been denied access to the protocol bridge server by a protocol bridge credential exit
Severity
20 : Error
Explanation
The protocol bridge agent invokes one or more credential exits to map the user ID to credentials to be used to access the protocol bridge server. The result is that one of the credential exits has denied the user access.
Response
Verify whether the user should be allowed access to the protocol bridge server or not. If the user should be allowed access modify the credential exit(s) configuration accordingly.
BFGBR0088E
No credential mapping has been found for user ''<insert_0>''.
Severity
20 : Error
Explanation
The protocol bridge agent invokes one or more credential exits to map the user ID to credentials to be used to access the protocol bridge server. The result is that no mapping has been found for the is user.
Response
Verify whether the user should have a credential mapping or not. If the user should have a credential mapping modify the credential exit(s) configuration accordingly.
BFGBR0089I
The user ''<insert_0>'' has been successfully mapped to a set of protocol bridge credentials.
Severity
0 : Information
Explanation
The protocol bridge agent invokes one or more credential exits to map the user ID to credentials to be used to access the protocol bridge server. The result is that the user has been successfully mapped to a set of credentials.
Response
No action required.
BFGBR0095E
The default protocol bridge credential exit has found a 'user' element with an empty or non-existent 'name' attribute in the credential mapping XML file. This element has been ignored.
Severity
20 : Error
Explanation
It is mandatory for a 'user' element to have a 'name' attribute with a non-empty pattern as a value.
Response
Update the credential mapping XML file so that all 'user' elements have a 'name' attribute with a valid value.
BFGBR0099E
Bridge agent could not connect to ''<insert_0>'' with user ID ''<insert_1>'' as it has no home directory.
Severity
20 : Error
Explanation
The bridge agent was not able to log on to the named server and user ID as its configuration is not complete and does not have a valid home directory.
Response
Review the given user ID on the protocol file server and ensure the configuration is valid.
BFGBR0100E
An internal error has occurred. Attempt to access a JSch session when none is present.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0101E
An internal error has occurred. Attempt to access a JSch channel when none is present.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0102E
Bridge agent could not locate and connect to protocol file server <insert_0>
Severity
20 : Error
Explanation
The bridge agent could not connect to the named protocol file server.
Response
Review the availability of the protocol file server and check the configuration of the bridge agent.
BFGBR0103E
Bridge agent failed to authenticate the connection to host <insert_0> with user ID <insert_1>.
Severity
20 : Error
Explanation
The bridge agent connected to the protocol file server, but was unable to authenticate the user that is was requested to connect with.
Response
Review the user ID used and ensure the protocol file server is configuration to allow that user ID access.
BFGBR0104E
Bridge agent failed to connect to host <insert_0> with credentials of <insert_1> because <insert_2>
Severity
20 : Error
Explanation
The bridge agent connected to the protocol file server, but was unable to authenticate the user that is was requested to connect with.
Response
Review the credentials used and ensure the protocol file server is configuration to allow that user ID access.
BFGBR0105E
An internal error has occurred. Bridge agent was expecting a channel class from the JSch client but received <insert_0>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0106E
An internal error has occurred. Bridge agent was unable to create a channel as the JSch client reported <insert_0>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0107E
The JSch client has reported an exception of <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0108E
3rd Party protocol driver libraries for <insert_0> cannot be located.
Severity
20 : Error
Explanation
The required 3rd party protocol driver libraries cannot be located and these are required to connect to the selected protocol file server
Response
Review any class path changes that have occurred and ensure the relevant protocol bridge driver has been included.
BFGBR0109E
Failed to delete file <insert_0> from the connected protocol file server.
Severity
20 : Error
Explanation
The protocol driver failed to delete a file as the request was rejected by the protocol file server.
Response
Check the credentials used and ensure there is permission to delete the specified file.
BFGBR0110E
Attempt to read file <insert_0> from the protocol file server has failed with server error <insert_1>
Severity
20 : Error
Explanation
The protocol driver failed to get a file as the request was rejected by the protocol file server.
Response
Review the original transfer request and ensure file path names are valid for the protocol file server.
BFGBR0111E
Failed to create directory <insert_0> on the connected protocol file server.
Severity
20 : Error
Explanation
The protocol driver failed to create a directory as the request was rejected by the protocol file server.
Response
Check that the credentials for the protocol bridge have permission to create directories on the protocol file server.
BFGBR0112E
Attempt to write file <insert_0> on the protocol file server has failed with server reporting error <insert_1>
Severity
20 : Error
Explanation
The protocol driver failed to write a file as the request was rejected by the protocol file server.
Response
Review the original transfer request and ensure file path names are valid and directories have the correct permissions.
BFGBR0113E
Bridge agent failed to authenticate the connection to <insert_0> with user ID <insert_1>.
Severity
20 : Error
Explanation
The bridge agent connected to the protocol file server, but was unable to authenticate the user that it was requested to connect with.
Response
Review the credentials used and ensure the protocol file server is configured to allow that user ID access.
BFGBR0114E
Attempt to append to file <insert_0> on the protocol file server has failed with server error <insert_1>
Severity
20 : Error
Explanation
During a transfer recovery operation, the protocol bridge requested to append an existing file on the file protocol server. This requested was rejected by the protocol file server.
Response
Review the permissions of the file, its directory and check that the server supports opening file for append operations.
BFGBR0115W
The server has terminated the connection. Exception: <insert_0>
Severity
10 : Warning
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0116E
Attempt to rename file <insert_0> to <insert_1> has been rejected by the protocol file server.
Severity
20 : Error
Explanation
The protocol driver failed to perform a rename of a file as the request was rejected by the server.
Response
Check that the protocol bridge has permissions to perform rename of the named files on the server.
BFGBR0117E
An internal error has occurred. When attempting discover the current remote working directory. Server returned reply code <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0118E
Bridge agent was unable to view directory <insert_0> because <insert_1>
Severity
20 : Error
Explanation
Bridge agent attempted to view a directory on the protocol file server but failed.
Response
Review the associated error message and investigate the health of the protocol file server.
BFGBR0119E
Bridge agent was unable to create directory <insert_0> because <insert_1>
Severity
20 : Error
Explanation
Bridge agent was transferring files to the protocol file server and needed to create a directory. The protocol file server refused to create the directory and the transfer of the file has failed.
Response
Review the associated error message and investigate the file's permissions on the protocol file server.
BFGBR0120E
Protocol bridge agent was unable to rename file <insert_0> to <insert_1> because <insert_2>
Severity
20 : Error
Explanation
Protocol bridge agent was attempting to rename a file on the protocol file server but received an exception from the SFTP client.
Response
Review the associated error message and investigate the file's permissions on the protocol file server.
BFGBR0121E
Bridge agent was unable to establish its current working directory because <insert_0>
Severity
20 : Error
Explanation
Bridge agent was attempting to establish its current working directory but received an exception from the SFTP client.
Response
Review the associated error message and investigate the health of the protocol file server.
BFGBR0123E
Bridge agent was unable to collect linked file status of <insert_0> because <insert_1>
Severity
20 : Error
Explanation
Bridge agent was attempting obtain file information of the named file but received an exception from the SFTP client.
Response
Review the associated error message and investigate the health of the protocol file server.
BFGBR0124E
Internal error detected: Attempted to redefine 3rd party driver when not in unit test mode.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0125E
Bridge agent has lost the connection with the protocol file server because <insert_0>
Severity
20 : Error
Explanation
The connection between the Bridge agent and its protocol file server has been broken.
Response
Review the associated error message and investigate the health of the protocol file server.
BFGBR0126E
An internal error has occurred. Request for an unsupported function <insert_0>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0127E
Bridge agent has rejected connection with <insert_0> as its supplied host key does not match the expected value. Host key returned was <insert_1>
Severity
20 : Error
Explanation
The host key supplied by the protocol file server to the bridge agent did not match the expected value from the credentials and therefore the connection was rejected. The transfer request was failed for this reason.
Response
Review the host key in the configured credentials and ensure it is the correct value.
BFGBR0128E
An internal error has occurred. Driver failed to release Identity <insert_0> because of exception <insert_1>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0129E
Bridge agent has incomplete credentials for connecting to a FTP Server. A password is required for user ID <insert_0> on <insert_1>.
Severity
20 : Error
Explanation
The credentials supplied for the user ID does not have a password. The Bridge agent has been configured to connect to a FTP server which requires a user ID and a password. No connection can be attempted and the transfer has been failed.
Response
If using the default credentials package review the ProtocolBridgeCredentials.xml and ensure the user ID has a password. If using a custom supplied credentials package refer to its documentation.
BFGBR0130E
Bridge agent has incomplete credentials for connection to an SFTP Server. A password or private key is required for user ID <insert_0> on <insert_1>.
Severity
20 : Error
Explanation
The credentials supplied for the user ID does not have a password or a private key.The Bridge agent has been configured to connect to an SFTP server which requires a user ID and a password or a user ID and private key. No connection can be attempted and the transfer has been failed.
Response
If using the default credentials package review the ProtocolBridgeCredentials.xml and ensure the user ID has a password or private key. If using a custom supplied credentials package refer to its documentation.
BFGBR0131E
The minimum value for agent property protocolBridgeMaxSessions must be <insert_0>. This value has been set to <insert_1> which is below the minimum for the bridge agent.
Severity
20 : Error
Explanation
A request in the agent properties to set the maximum number of bridge sessions to a value below the absolute minimum to support transfer operations. This value must be set so all possible sender and receiver transfers can have access to the protocol file server. The absolute minimum value is set as the sum of the agent properties maxSourceTransfer and maxDestinationTransfer, which is the default value of protocolBridgeMaxSessions.
Response
Review the three agent properties and either increase protocolBridgeMaxSessions or reduce either maxSourceTransfer or maxDestinationTransfer, then restart the bridge agent.
BFGBR0132E
An internal error has occurred. Request for bridge information of <insert_0> has been made before this agent has been configured as a bridge agent.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0133E
The user ID <insert_0> is not valid for use with the bridge agent and the transfer has been failed.
Severity
20 : Error
Explanation
The user ID supplied with the transfer request has not been validated by the credential package. As a result no credentials are available for connecting to the protocol file server and the transfer request has been failed.
Response
Review the protocolBridgeCredentials.xml configuration to ensure the given user ID has been configured. If the default credential package is not being used then refer to the documentation of the credential package being used.
BFGBR0134E
An internal error has occurred. Attempt to set socket timeout return exception of <insert_0>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0135E
The server list format type of <insert_0> is not supported.
Severity
20 : Error
Explanation
The agent properties have defined the server list format with an unsupported list format type.
Response
Review the agent properties and ensure the server list format type is one of those supported.
BFGBR0136E
An internal error has occurred. Request to use a session by <insert_0> after it has been closed.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0137E
IBM MQ Managed File Transfer does not support communication between bridge agents on a z/OS platform and an SFTP protocol file server.
Severity
20 : Error
Explanation
An attempt was made to start a bridge agent on a z/OS platform, which has been configured to communicate with an SFTP protocol file server. This configuration is not supported.
Response
Review the bridge configuration you require and where possible use an FTP protocol file server.
BFGBR0138E
An internal error has occurred. An attempt was made to get an input or output stream while a transfer was in recovery.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0139E
An internal error has occurred. An attempt was made to get an input or output stream while a transfer was in recovery.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0140E
Protocol file server <insert_0> for user ID <insert_1> has accepted the credentials, but rejected subsequent channel requests. This may be due to an expired password on the server.
Severity
20 : Error
Explanation
Bridge agent has successfully connected to the protocol file server and the supplied credentials have been accepted. However the server refuses any other requests which may be due to the associated password requiring maintenance.
Response
Check the user ID on the protocol file server to see if any maintenance is required. When resolved submit the transfer request again.
BFGBR0141E
The value ''<insert_0>'' ftpsType attribute in the protocol bridge properties file is invalid.
Severity
20 : Error
Explanation
The ftpsType attribute must have a value of "implicit" or "explicit".
Response
Set the ftpsType attribute to a valid value. Then restart the agent.
BFGBR0142E
The ftpsTrustStore attribute is missing from the protocol bridge properties file.
Severity
20 : Error
Explanation
The ftpsTrustStore attribute is mandatory when the protocol bridge is using the FTPS protocol.
Response
Set the ftpsTrustStore attribute. Then restart the agent.
BFGBR0143E
The trustStorePassword attribute is missing from the protocol bridge credentials file.
Severity
20 : Error
Explanation
The trustStorePassword attribute is mandatory when the protocol bridge is using the FTPS protocol.
Response
Set the trustStorePassword attribute. Then restart the agent.
BFGBR0144E
The creation of the Trust Manager for FTPS authentication failed. The reason for the failure is: <insert_0>
Severity
20 : Error
Explanation
The attempt to create the Trust Manager using the trustStore, trustStorePassword and trustStoreType attributes failed.
Response
Check the reason for the error and make any required configuration changes. Then restart the agent.
BFGBR0145E
The keyStorePassword attribute is missing from the protocol bridge credentials file.
Severity
20 : Error
Explanation
The keyStorePassword attribute is mandatory when the protocol bridge is using the FTPS protocol and the keyStore attribute has been set.
Response
Set the keyStorePassword attribute. Then restart the agent.
BFGBR0146E
The creation of the Key Manager for FTPS authentication failed. The reason for the failure is: <insert_0>
Severity
20 : Error
Explanation
The attempt to create the Trust Manager using the keyStore, keyStorePassword and keyStoreType attributes failed.
Response
Check the reason for the error and make any required configuration changes. Then restart the agent.
BFGBR0147E
The server has rejected authentication with user ID <insert_0>.
Severity
20 : Error
Explanation
The protocol bridge failed to connect to the server as the authentication given was rejected.
Correct the ProtocolBridgeProperties.xml file within the protocol bridge agent's configuration directory by either removing the duplicate protocol server entry or renaming the duplicate protocol server entry to a unique name.
BFGBR0156E
No protocol server entry present for the specified default server name <insert_0>.
Severity
20 : Error
Explanation
There must be a protocol server entry present with the same name as specified by the name attribute of the defaultServer element.
Response
Correct the ProtocolBridgeProperties.xml file within the protocol bridge agent's configuration directory such that the name attribute of the defaultServer element references a protocol server entry with the same name.
BFGBR0157E
The same target protocol server name must be specified for each file to be transferred.
Severity
20 : Error
Explanation
The MQMFT protocol bridge only supports transfers to or from a single protocol server.
Response
Check the files specified in your transfer request to ensure they all refer to a single protocol server.
BFGBR0158E
The protocol server name <insert_0> is invalid.
Severity
20 : Error
Explanation
The protocol server name must be at least 2 characters in length and only contain either alphanumeric characters or the following characters: ".", "_", "/" and "%". This problem is either caused by an incorrectly configured protocol bridge agent where the protocol server is defined by agent properties or by a protocol server properties user exit, installed for the protocol bridge agent, not returning a correct server name.
Response
Report the problem to the MQMFT system administrator to resolve the problem with a protocol server properties user exit. If no protocol server user exits are installed, contact the IBM support center.
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0160E
An internal error has occurred. The bridge manager has not been initialized.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0161E
The protocol server does not support relative file paths.
Severity
20 : Error
Explanation
In order to support relative file paths the protocol server must support the CWD command.
Response
Change the transfer request to use an absolute file path and resubmit the request.
BFGBR0162E
The default protocol bridge properties exit failed to initialize. The protocol bridge agent will be stopped.
Severity
20 : Error
Explanation
It is mandatory for the default protocol bridge properties exit to be successfully initialized for a protocol bridge agent to start.
Response
Check the agent event log for any errors relating to the initialization of the default protocol bridge properties exit. For further information on the default protocol bridge properties exit, refer to the product documentation online at: http://publib.boulder.ibm.com/infocenter/wmqfte/v7r0/.
The transfer required the default protocol server to be used, but no default protocol server is defined for the protocol bridge agent.
Response
Either resubmit the transfer with a valid protocol server specified or reconfigure the protocol bridge agent to define a default protocol server.
BFGBR0164E
The protocol server <insert_0> is not known to the protocol bridge.
Severity
20 : Error
Explanation
The protocol server specified for the transfer is unknown to the protocol bridge agent.
Response
Check the protocol server named within the transfer is correct. Check the protocol bridge agent's event log to ensure that there are no errors relating to the protocol server configuration, and reconfigure the agent if necessary. Resubmit the transfer after the problem has been resolved.
BFGBR0165E
The following list of protocol bridge properties exits failed to initialize: ''<insert_0>''. The protocol bridge agent will be stopped.
Severity
20 : Error
Explanation
It is mandatory for all of the configured protocol bridge properties exits to be successfully initialized for a protocol bridge agent to start.
Response
Check the agent event log for any errors relating to the initialization of the protocol bridge properties exits. If the product supplied protocol bridge properties exit has failed, refer to the product documentation online at: http://publib.boulder.ibm.com/infocenter/wmqfte/v7r0/.
BFGBR0166W
The <insert_0> file does not exist.
Severity
10 : Warning
Explanation
The properties file is used to define the set of protocol servers for the protocol bridge agent. If this file does not exist, properties defined in the agent properties file will be used to define a single (default) protocol server. We might see this warning if you have a protocol bridge agent setup for an MQMFT 7.0.4 or earlier installation.
Response
If required, upgrade the protocol bridge agent to define the properties file. Refer to the product documentation online at: http://publib.boulder.ibm.com/infocenter/wmqfte/v7r0/ for the XML format of the properties file.
There is problem with the ProtocolBridgeProperties.xml file and as a result the protocol bridge agent cannot be started. See previously reported error messages for the problem description.
The protocol server name has not been defined or is blank.
Severity
20 : Error
Explanation
The protocol server name must be specified and be at least 2 characters in length and only contain either alphanumeric characters or the following characters: ".", "_", "/" and "%". This problem is either caused an incorrectly configured protocol bridge agent where the protocol server is defined by agent properties or by a protocol server properties user exit, installed for the protocol bridge agent, not returning a correct server name.
Response
Report the problem to the MQMFT system administrator to resolve the problem with a protocol server properties user exit. If no protocol server user exits are installed, contact the IBM support center.
BFGBR0169E
No credential exit found for protocol server ''<insert_1>'' for mapping user ID ''<insert_0>''.
Severity
20 : Error
Explanation
The protocol bridge agent invokes one or more credential exits to map the user ID to credentials to be used to access the protocol bridge server. The required protocol server is not the default and no ProtocolBridgeCredentialExit2 type credential user exits have been configured, which can be used to map user IDs for non-default protocol servers. The result is that no mapping can be found for the user.
Response
Report the problem to the MQMFT system administrator to resolve the problem with the credential user exits.
There must be at least one server defined in the ProtocolBridgeProperties.xml file before a transfer can take place.
Response
Report the problem to the MQMFT system administrator to define servers in the ProtocolBridgeProperties.xml file before attempting transfers.
BFGBR0171E
The FTP protocol server ''<insert_0>'' was unable to enter passive mode. The FTP reply code is: <insert_1>
Severity
20 : Error
Explanation
Passive mode was enabled by the passiveMode protocol bridge attribute but the FTP server was unable to enter passive mode.
Response
Check the reason for the failure. Make any necessary changes to the FTP server configuration. Then restart the protocol bridge agent.
BFGBR0172E
The FTPS protocol server ''<insert_0>'' was unable to enter passive mode. The FTP reply code is: <insert_1>
Severity
20 : Error
Explanation
The FTPS server was unable to enter passive mode, which is required for the protocol bridge to connect to the FTPS server.
Response
Check the reason for the failure. Make any necessary changes to the FTPS server configuration. Then restart the protocol bridge agent.
BFGBR0173E
The attempt to connect to the server on host <insert_0> with port <insert_1> was rejected with exception <insert_2>
Severity
20 : Error
Explanation
The protocol bridge failed to connect to the server and therefore cannot process the transfer request.
Response
Verify the agent properties are correct and that the server is configured to match the agent properties. Verify that the server is operational and listening on the expected port.
BFGBR0174E
No credentials could be found for agent ''<insert_0>'' in credentials file ''<insert_1>''
Severity
20 : Error
Explanation
When searching for credentials information associated with the supplied agent name in the specified credentials file, none could be found. Correctly defined credentials are required for the agent to function so the agent will be stopped.
Response
Check the supplied credentials file to ensure it contains definitions for the supplied agent. If no definitions are found, create some and restart the agent.
BFGBR0175E
An attempt to open the truststore <insert_0> has failed because the file could not be found.
Severity
20 : Error
Explanation
The protocol bridge has been configured to operate with a truststore, however the agent could not locate the named truststore.
Response
Verify that the truststore is at the correct location and that the agent has permission to read the store.
BFGBR0176E
An attempt to read the truststore <insert_0> has failed with exception <insert_1>
Severity
20 : Error
Explanation
The protocol bridge agent found a problem when attempting to read the truststore and was unable to load and use the truststore.
Response
Review the underlying exception regarding the truststore and correct the condition before restarting the agent.
BFGBR0177E
An attempt to load the truststore <insert_0> has resulted in a general security exception of <insert_1>
Severity
20 : Error
Explanation
The protocol bridge has been configured to use a truststore and when the agent attempted to load the truststore, it failed with a general security exception.
Response
Review the general security exception and correct as necessary before restarting the agent.
BFGBR0178E
An attempt to open the keystore <insert_0> has failed because the file could not be found.
Severity
20 : Error
Explanation
The protocol bridge has been configured to operate with a keystore, however the agent could not locate the named keystore.
Response
Verify that the keystore is at the correct location and that the agent has permission to read the store.
BFGBR0179E
An attempt to read the keystore <insert_0> has failed with exception <insert_1>
Severity
20 : Error
Explanation
The protocol bridge agent found a problem when attempting to read the keystore and was unable to load and use the keystore.
Response
Review the underlying exception regarding the keystore and correct the condition before restarting the agent.
BFGBR0180E
An attempt to load the keystore <insert_0> has resulted in a general security exception of <insert_1>
Severity
20 : Error
Explanation
The protocol bridge has been configured to use a keystore and when the agent attempted to load the keystore, it failed with a general security exception.
Response
Review the general security exception and correct as necessary before restarting the agent.
BFGBR0181E
The file <insert_1> referenced by <insert_0> cannot be located or read.
Severity
20 : Error
Explanation
The ProtocolBridgeServerProperties.xml contains a configuration which has a referenced to a file which cannot be located or read on the file system.
Response
Review the entry in the ProtocolBridgeServerProperties.xml and either correct the path name or make the named file available.
BFGBR0182E
The transfer of the file has failed due to a 522 (Protocol not supported) error returned by the FTPS server. The reason is: <insert_0>
Severity
20 : Error
Explanation
The FTPS server has returned a 522 error in response to an FTPS command sent by the agent.
Response
Review the error message returned and make any necessary configuration changes. If the error is due to a 'session reuse required' error from a vsftpd server, disable the 'require_ssl_reuse' option on the vsftpd server. Then submit the transfer again.
BFGBR0183E
Protocol file server <insert_0> has rejected an open channel request. This may be because the maximum number of channels open for the protocol file server has been reached. Full reason given: <insert_1>
Severity
20 : Error
Explanation
Bridge agent has successfully connected to the protocol file server but the server has refused an open channel request. Some protocol file servers limit the number of concurrent open channels. The reason for this error may be because the maximum number of channels open for the protocol file server has been reached.
Response
If available, check the protocol file server logs for more information on the reason for the open channel request failure, and take appropriate action. When resolved the transfer request should automatically recover from the error.
BFGBR0184E
The creation of the protocol bridge FIPS SSLContext failed. The reason for the failure is: <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0185E
An internal error has occurred. No configuration information can be found for server <insert_0>
Severity
20 : Error
Explanation
The agent maintains an internal table containing configuration information for the servers defined in the ProtocolBridgeProperties.xml file. While processing a transfer request, the agent was unable to find an entry in this internal table for the required server.
Response
If the problem persists, see problem determination information in the product documentation.
BFGBR0186E
The server has terminated the connection. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The connection between the protocol bridge and the file server has been terminated. This may have occurred due to either the file server or communication to the file server being no longer available.
Response
No action required as the protocol bridge will attempt to create a new session and connection
BFGBR0187E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The size of the source file exceeds the allocated storage for the current directory or dataset on the server.
Response
Review the error message returned and make any necessary changes.
BFGBR0188E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The page type specified for the source file is unknown to server.
Response
Review the error message returned and make any necessary changes.
BFGBR0189E
The transfer of the file encountered a temporary error. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server encountered an unexpected local error while processing the data.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0190E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
An attempt was made to access a file that either does not exist or that the user does not have access rights to the file.
Response
Review the error message returned and make any necessary changes.
BFGBR0191E
The transfer of the file encountered a temporary error. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server was unable to gain access to the specified file as the file is exclusively accessed by another process.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0192E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server does not have sufficient storage space on the system to complete the transfer.
Response
Make enough storage space available on the server and resubmit the transfer request.
BFGBR0193E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The filename does not confirm to file naming policies of the server.
Response
Check the file naming policies on the server. Modify filename to match the policies and resubmit the transfer request.
BFGBR0194E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server does not support the specified command.
Response
The file server does not implement the minimum set of commands as per FTP specification.Ensure the protocol bridge agent connects to a file server that implements minimum FTP specification.
BFGBR0195E
The transfer of the file encountered a temporary error. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server is not available to process the request as it will be shutting down after finishing any pending file transfers.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0196E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server received an erroneous command from the protocol bridge agent. Possible reasons are:(1) Command is unrecognised. (2) Command has syntax errors. (3) Command along with its parameters is too long.
Response
Contact the IBM support center.
BFGBR0197E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server received a command that has syntax errors from the protocol bridge agent.
Response
Contact the IBM support center.
BFGBR0198E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server received an incorrect sequence of commands from the protocol bridge agent.
Response
Contact the IBM support center.
BFGBR0199E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server does not implement the command sent by the protocol bridge agent.
Response
The file server does not implement the minimum set of commands as per the FTP specification.Ensure the protocol bridge agent connects to a file server that implements minimum FTP specification.
BFGBR0200E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The user is not logged in.
Response
Verify if a valid user id and password has been specified in ProtocolBridgeCredentials.xml file for the agent.
BFGBR0201E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
Account information for storing files was not provided by the protocol bridge agent.
Response
Contact the IBM support center.
BFGBR0202E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server requires a change in security negotiation.
Response
No action required as the protocol bridge agent will attempt to create a new session and connection.
BFGBR0203E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The protocol bridge agent requested a change in the command channel protection level that cannot be processed due to the security policy in place on the server.
Response
No action required as the protocol bridge will attempt to create a new session and connection.
BFGBR0204E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server is unwilling to process a request due to its security policy as the server requires a certain level of security exists on the connection before processing the request.
Response
Review the error message returned and make any necessary changes.
BFGBR0205E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
A data protection check failed at the server possibly because the server received a buffer size greater than the negotiated value.
Response
Review the error message returned and make any necessary changes.
BFGBR0206E
The transfer of the file failed. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The protection level requested by the protocol bridge agent is not supported by the current security mechanism of server.
Response
Review the error message returned and make any necessary changes.
BFGBR0207E
An unrecoverable error occurred when communicating with the file server. The reply string sent back by the server was ''<insert_0>''
Severity
20 : Error
Explanation
The server encountered an unexpected local error while processing the data.
Response
Review the error message returned and take appropriate action.
BFGBR0208E
A protocol bridge configuration error has been detected, associated with the option "requestUTF8ControlEncoding". The file server return code was ''<insert_0>''
Severity
20 : Error
Explanation
The protocol bridge agent requested that the FTP/FTPS server use UTF-8 character encoding for data encoded over the control channel. However the FTP(s) server returned a negative response.
Response
Review the FTP/FTPS server response and consider disabling the "requestUTF8ControlEncoding" option if the file server does not support it.
BFGBR0209E
Bridge agent was unable to create directory <insert_0>
Severity
20 : Error
Explanation
Bridge agent was transferring files to the protocol file server and needed to create a directory. The protocol file server refused to create the directory and the transfer of the file has failed.
Response
Investigate the file's permissions on the protocol file server. If the issue persists, contact the IBM support center.
BFGBR0210E
Bridge agent failed to authenticate the connection to host <insert_0> since the user ID was not provided.
Severity
20 : Error
Explanation
The bridge agent connected to the protocol file server, but was unable to authenticate the user.
Response
Review the user ID and host key used and ensure the protocol file server is configuration to allow that user ID access.
BFGBR0211E
Bridge agent failed to authenticate the connection to host <insert_0> with user ID <insert_1> because of the error - unknown host key.
Severity
20 : Error
Explanation
The bridge agent connected to the protocol file server, but was unable to authenticate the user that is was requested to connect with.
Response
Review the host key used and ensure the protocol file server is configuration to allow that user ID access.
BFGBR0212E
Bridge agent failed to authenticate the connection to host <insert_0> with user ID <insert_1> because the provided host key has been revoked.
Severity
20 : Error
Explanation
The bridge agent connected to the protocol file server, but was unable to authenticate the user that is was requested to connect with.
Response
Review the host key used and ensure the protocol file server is configuration to allow that user ID access.
BFGBR0213E
Bridge agent could not connect to protocol file server <insert_0> since it has refused the connection or this may be a firewall issue
Severity
20 : Error
Explanation
The bridge agent could not connect to the named protocol file server.
Response
Review the availability and firewall to the protocol file server.
BFGBR0214E
The connection to protocol file server <insert_0> has gone down or the connection has timed out for timeout value <insert_1>
Severity
20 : Error
Explanation
The bridge agent could not connect to the named protocol file server.
Response
Review the availability of the protocol file server.
BFGBR0215E
Bridge agent failed to authenticate the connection to host <insert_0> with user ID <insert_1> because the host key has been changed.
Severity
20 : Error
Explanation
The bridge agent connected to the protocol file server, but was unable to authenticate the user that is was requested to connect with.
Response
Review the host key used and ensure the protocol file server is configuration to allow that user ID access.
BFGBR0216E
Authentication to protocol server ''<insert_0>'' failed because of invalid private key.
Severity
20 : Error
Explanation
The bridge agent connected to the protocol server, but was unable to authenticate the user.
Response
Review the user ID and private key used and ensure the user is authorized to connect to the protocol server.
BFGBR0217E
Bridge agent was unable to view directory <insert_0> because access was denied
Severity
20 : Error
Explanation
Bridge agent attempted to view a directory on the protocol file server but permission was denied.
Response
Review the associated directory for access permissions.
BFGBR0218E
Bridge agent was unable to find the directory <insert_0> because it does not exist
Severity
20 : Error
Explanation
Bridge agent attempted to view a directory on the file server but is not found.
Response
Review the associated path and name of the directory specified.
BFGBR0219E
An attempt to read the protocol bridge credentials for user <insert_0> has failed with error <insert_1>.
Severity
20 : Error
Explanation
An error occurred while reading credentials for the user. Review the associated error.