Explanation of the HPROF output file

IBM User Guide for Java V7 on Windows > Troubleshooting and support > Using diagnostic tools > Using the HPROF Profiler

Explanation of the HPROF output file

The first section of the file contains general header information such as an explanation of the options, copyright, and disclaimers. A summary of each thread follows.
You can see the output after using HPROF with a simple program, shown as follows. This test program creates and runs two threads for a short time. From the output, you can see that the two threads called apples and then oranges were created after the system-generated main thread. Both threads end before the main thread. For each thread its address, identifier, name, and thread group name are displayed. You can see the order in which threads start and finish.
THREAD START (obj=11199050, id = 1, name="Signal dispatcher", group="system")
THREAD START (obj=111a2120, id = 2, name="Reference Handler", group="system")
THREAD START (obj=111ad910, id = 3, name="Finalizer", group="system")
THREAD START (obj=8b87a0, id = 4, name="main", group="main")
THREAD END (id = 4)
THREAD START (obj=11262d18, id = 5, name="Thread-0", group="main")
THREAD START (obj=112e9250, id = 6, name="apples", group="main")
THREAD START (obj=112e9998, id = 7, name="oranges", group="main")
THREAD END (id = 6)
THREAD END (id = 7)
THREAD END (id = 5)
The trace output section contains regular stack trace information. The depth of each trace can be set and each trace has a unique ID:
TRACE 5:
	java/util/Locale.toLowerCase(Locale.java:1188)
	java/util/Locale.convertOldISOCodes(Locale.java:1226)
	java/util/Locale.<init>(Locale.java:273)
	java/util/Locale.<clinit>(Locale.java:200)
A trace contains a number of frames, and each frame contains the class name, method name, file name, and line number. In the previous example, you can see that line number 1188 of Locale.java (which is in the toLowerCase method) has been called from the convertOldISOCodes() function in the same class. These traces are useful in following the execution path of your program. If you set the monitor option, a monitor dump is produced that looks like this example:
MONITOR DUMP BEGIN
    THREAD 8, trace 1, status: R
    THREAD 4, trace 5, status: CW
    THREAD 2, trace 6, status: CW
    THREAD 1, trace 1, status: R
    MONITOR java/lang/ref/Reference$Lock(811bd50) unowned
	waiting to be notified: thread 2
    MONITOR java/lang/ref/ReferenceQueue$Lock(8134710) unowned
	waiting to be notified: thread 4
    RAW MONITOR "_hprof_dump_lock"(0x806d7d0)
	owner: thread 8, entry count: 1
    RAW MONITOR "Monitor Cache lock"(0x8058c50)
	owner: thread 8, entry count: 1
    RAW MONITOR "Monitor Registry lock"(0x8058d10)
	owner: thread 8, entry count: 1
    RAW MONITOR "Thread queue lock"(0x8058bc8)
	owner: thread 8, entry count: 1
MONITOR DUMP END
MONITOR TIME BEGIN (total = 0 ms) Thu Aug 29 16:41:59 2002
MONITOR TIME END
The first part of the monitor dump contains a list of threads, including the trace entry that identifies the code the thread executed. There is also a thread status for each thread where:

R — Runnable (The thread is able to run when given the chance)
S — Suspended (The thread has been suspended by another thread)
CW — Condition Wait (The thread is waiting)
MW — Monitor Wait (The monitor is waiting)
Next is a list of monitors along with their owners and an indication of whether there are any threads waiting on them.
The Heapdump is the next section. This information contains a list of the different areas of memory, and shows how they are allocated:
CLS 1123edb0 (name=java/lang/StringBuffer, trace=1318)
	super		111504e8
	constant[25]	8abd48
	constant[32]	1123edb0
	constant[33]	111504e8
	constant[34]	8aad38
	constant[115]	1118cdc8
CLS 111ecff8 (name=java/util/Locale, trace=1130)
	super		111504e8
	constant[2]	1117a5b0
	constant[17]	1124d600
	constant[24]	111fc338
	constant[26]	8abd48
	constant[30]	111fc2d0
	constant[34]	111fc3a0
	constant[59]	111ecff8
	constant[74]	111504e8
	constant[102]	1124d668
	...
CLS 111504e8 (name=java/lang/Object, trace=1)
	constant[18]	111504e8
CLS tells you that memory is being allocated for a class. The hexadecimal number following it is the address where that memory is allocated.
Next is the class name followed by a trace reference. Use this information to cross-reference the trace output and see when the class is called. If you refer to that particular trace, you can get the line number of the instruction that led to the creation of this object. The addresses of the constants in this class are also displayed and, in the previous example, the address of the class definition for the superclass. Both classes are a child of the same superclass (with address 11504e8). Looking further through the output, you can see this class definition and name. It is the Object class (a class that every class inherits from). The JVM loads the entire superclass hierarchy before it can use a subclass. Thus, class definitions for all superclasses are always present. There are also entries for Objects (OBJ) and Arrays (ARR):
OBJ 111a9e78 (sz=60, trace=1, class=java/lang/Thread@8b0c38)
	name		111afbf8
	group		111af978
	contextClassLoader	1128fa50
	inheritedAccessControlContext	111aa2f0
	threadLocals	111bea08
	inheritableThreadLocals	111bea08
ARR 8bb978 (sz=4, trace=2, nelems=0, elem type=java/io/ObjectStreamField@8bac80)
If you set the heap option to sites or all , you get a list of each area of storage allocated by your code. The parameter all combines dump and sites. This list is ordered starting with the sites that allocate the most memory:
SITES BEGIN (ordered by live bytes) Tue Feb 06 10:54:46 2007
          percent          live          alloc'ed  stack class  rank   self  accum     bytes objs     bytes  objs trace name
    1 20.36% 20.36%    190060   16    190060    16 300000 byte[]
    2 14.92% 35.28%    139260 1059    139260  1059 300000 char[]
    3  5.27% 40.56%     49192   15     49192    15 300055 byte[]
    4  5.26% 45.82%     49112   14     49112    14 300066 byte[]
    5  4.32% 50.14%     40308 1226     40308  1226 300000 java.lang.String
    6  1.62% 51.75%     15092  438     15092   438 300000 java.util.HashMap$Entry
    7  0.79% 52.55%      7392   14      7392    14 300065 byte[]
    8  0.47% 53.01%      4360   16      4360    16 300016 char[]
    9  0.47% 53.48%      4352   34      4352    34 300032 char[]
   10  0.43% 53.90%      3968   32      3968    32 300028 char[]
   11  0.40% 54.30%      3716    8      3716     8 300000 java.util.HashMap$Entry[]
   12  0.40% 54.70%      3708   11      3708    11 300000 int[]
   13  0.31% 55.01%      2860   16      2860    16 300000 java.lang.Object[]
   14  0.28% 55.29%      2644   65      2644    65 300000 java.util.Hashtable$Entry
   15  0.28% 55.57%      2640   15      2640    15 300069 char[]
   16  0.27% 55.84%      2476   17      2476    17 300000 java.util.Hashtable$Entry[]
   17  0.25% 56.08%      2312   16      2312    16 300013 char[]
   18  0.25% 56.33%      2312   16      2312    16 300015 char[]
   19  0.24% 56.57%      2224   10      2224    10 300000 java.lang.Class
In this example, Trace 300055 allocated 5.27% of the total allocated memory. This percentage works out to be 49192 bytes.
The cpu option gives profiling information about the processor. If cpu is set to samples, the output contains the results of periodic samples taken during execution of the code. At each sample, the code path being processed is recorded, and a report is produced similar to:
CPU SAMPLES BEGIN (total = 714) Fri Aug 30 15:37:16 2002
rank   self  accum   count trace method
1 76.28% 76.28% 501 77 MyThread2.bigMethod
2 6.92% 83.20% 47 75 MyThread2.smallMethod
...
CPU SAMPLES END
You can see that the bigMethod() was responsible for 76.28% of the processor execution time and was being run 501 times out of the 714 samples. If you use the trace IDs, you can see the exact route that led to this method being called.

Parent: Using the HPROF Profiler

Error 404 - Not Found
Error 404 - Not Found
The document you are looking for may have been removed or re-named. Please contact the web site owner for further assistance.