Installing secondary languages for IBM licensed programs
Follow these steps to install an i5/OS® secondary language for IBM® licensed programs.
- You must sign on to the system as QSECOFR. If you are not, sign off and then sign on again using QSECOFR.
- Write down the national language version identifier on the secondary language media. You will need this in step 8. ________
Secondary language media is identified by the N29xx on the label. The identifier is in the form 29xx, where xx is a unique number for each language. To find the appropriate feature code for your language, refer to Feature codes for national language version.
- Load the secondary language media volume in the installation device.
- Type the following command on any i5/OS control language (CL) command line and press Enter:
CHGMSGQ QSYSOPR *BREAK SEV(95)
- A message display could appear. Press F3 (Exit).
Ignore the messages that are shown.
- Type GO LICPGM on any CL command line and press Enter:
- The Work with Licensed Programs menu appears. Use the page down or rollup key to see the second display of the Work with Licensed Programs menu.
LICPGM Work with Licensed Programs System: XXXX Select one of the following: Secondary Languages 20. Display installed secondary languages 21. Install secondary languages 22. Delete secondary languagesType 21 and press Enter.
- The Install Secondary Languages display appears.
Install Secondary Languages System: XXXX Primary language . . . . . . : 2924 Description . . . . . . . . : English Type options, press Enter. 1=Install Installed Option Language Description Library Release _ 2902 Estonian QSYS2902 _ 2903 Lithuanian QSYS2903 _ 2904 Latvian QSYS2904 _ 2905 Vietnamese QSYS2905 _ 2906 Lao QSYS2906 _ 2909 Belgian English QSYS2909 1 2911 Slovenian QSYS2911 _ 2912 Croatian QSYS2912Use the Page Down key until you see the language that you want to install. Type 1 in the option column next to the language you want to install. You can install only one language at a time. Press Enter.
- After the language feature is entered, the Confirm Install of Secondary Languages display is shown.
Confirm Install of Secondary Languages System: XXX Press Enter to confirm your choices for 1=Install. Press F12 to return to change your choices. Installed Option Language Description Library Release 1 2911 Slovenian QSYS2911Press Enter.
- The Install Option for Secondary Languages appears.
Install Option for Secondary Languages System: XXX Type choice, press Enter. Installation device . . . OPT01 Name Replace if Current . . . . N Y=Yes N=NoType the following and press Enter:Installation device: OPT01 (See note.)
Replace if Current: NOPT01 is used for the installation device in this example. If you are using a different naming convention, type the name you have assigned to the installation device.
One or both of the following displays show the status of the language objects as they are installed on the system.
Installing Licensed Programs System: XXXX Licensed programs processed . . . . . . . . . . : 0 of XXX Licensed program install in progressThe following display is an example of the display that appears during the installation process.Installing Licensed Programs System: XXXX Licensed programs processed . . . . . . . . . . : X of XXX Licensed Program Option Description Type 5722WDS *BASE WebSphere Development Studio 2911
- If you see the following message, load the next volume of the secondary language media and continue the installation.
Be certain that the label on the next volume is for the same secondary language.
Display Messages System: XXXX Queue . . . . . : QSYSOPR Program . . . . : *DSPMSG Library . . . : QSYS Library . . . : Severity . . . . : 95 Delivery . . . : *BREAK Type reply (if required), press Enter. Load the next volume in optical device OPT01 (X G) Reply . . . . GType G and press Enter. After you load each volume, type G and press Enter. If there are no more volumes to load that contain licensed programs, or if you want to end the loading process, type X and press Enter.
- The Work with Licensed Programs display appears on your console when the installation process is completed. One of the following messages appears on the bottom of the Work with Licensed Programs display.
Work with licensed programs function not complete. Go to the topic Troubleshooting software installation problems to determine the problem.
Work with licensed programs function has completed. Continue with the next step.
Some licensed program options do not have language objects or are not supported for secondary languages. For example, options 6, 7, and 9 of the operating system are not supported. Option 8 of the operating system does not have any language objects. You can use LICPGM menu option 20 to see the products that have secondary languages installed.
You have completed this task.
- Do you have more secondary languages to install?
- No. Go to the next step.
- Yes. Go back to step 2 at the beginning of this topic.
- Do install secondary languages for licensed programs that are not shown in the list using option 11 of the Work with Licensed Programs menu?
- No. Go to the next step.
- Yes. Go to Installing secondary languages for non-IBM licensed programs to install secondary languages for these licensed programs.
- You must complete the installation process before you put your system into operation. Go to Checklist: Completing the i5/OS installation and complete the instructions.
Parent topic:
Installing a secondary language