Backup and recovery frequently asked questions
This topic contains information about questions and answers about backup and recovery procedures and concepts.
Some of the answers direct you to a specific information center topic, or to a section of the Recovering your system topic that contains the answer to your question.
How do I make sure that I save everything that I need to save on a regular basis?
What are the different i5/OS® object types that I might need to save?
Is it possible to save only objects that have changed?
What kind of methods besides a good save strategy can I use to protect my data?
What kind of storage devices can I take advantage of?
What is the best way to manage my save media?
How does the save-while-active function work?
How can I reduce the time it takes to back up my system?
How do I back up my entire system while I am away?
How do I back up my Domino® user information?
How do I save an independent auxiliary storage pool (ASP)?
Do I need to be in a restricted state to back up QUSRSYS?
How do I save objects that are active?
How can I determine if everything on my system is backed up?
How do I transfer objects from one system to another system?
How can I find out when an object was last saved?
Troubleshooting backup problems
Why do my backups take so long after I restart my system?
Why do my backups take longer after I upgrade to a new release?
Why do my backups take longer after I change hardware on my system?
I am backing up only changed objects, but why is my tape filling up?
Why are not all the changed objects saved when I am saving changed objects on my system?
Why are not all the objects in QUSRSYS being saved when I am saving the QUSRSYS library?
Why is my system not saving all of my libraries?
How do save commands handle damage on objects?
What happens when I restore user profiles?
What are the advantages in using RSTUSRPRF *ALL as opposed to individual profiles?
What does the Restore Authority (RSTAUT) command do?
What steps should I follow to reload my entire system?
How do I reload my entire system?
What should I follow if I want to reload my Licensed Internal Code?
How do I reload my operating system?
How do I restore physical database files?
How do I restore logical files?
How do I restore an individual object from tape?
How do I recover an independent ASP?
Troubleshooting recovery problems
Why is my restore process taking a very long time?
Why am I experiencing authority errors after a restore operation?
Planning a backup strategy
How do I make sure that I save everything that I need to save on a regular basis? See Knowing what to save and how often to save it.
What are the different i5/OS object types that I might need to save? See Manually saving parts of your system.
Is it possible to save only objects that have changed? Yes. See Saving only changed objects.
What kind of methods besides a good save strategy can I use to protect my data? You can use Disk protection types to protect the data on your system.
What kind of storage devices can I take advantage of? See Storage solutions for different ways to store your data.
What is the best way to manage my save media? Backup, Recovery, and Media Services (BRMS) helps you implement a disciplined approach to managing your backups, and provides you with an orderly way to retrieve lost or damaged data.
How does the save-while-active function work? See Saving your system while it is active.
How can I reduce the time it takes to back up my system? You can take advantage of several different methods to reduce the time it takes to back up your system. Your business has unique needs and some methods are more appropriate than others. See the following options to investigate time-saving backup techniques:
- Saving only changed objects
- Saving your system while it is active
- Saving to multiple devices to reduce your save window
Basic backup tasks
How do I back up my entire system while I am away? To perform unattended backups, you can use one of the following options:
- See GO SAVE: Option 21 (saving the entire system) and specify a time at the Start time prompt.
- See Backing up your system for unattended full system backups.
How do I back up my Domino user information? See the Lotus® Domino Reference Library for information about saving Domino information. Backup, Recovery, and Media Services (BRMS) also provides excellent support for backing up Domino information.
How do I save an independent auxiliary storage pool (ASP)? See Saving independent ASPs.
Do I need to be in a restricted state to back up QUSRSYS? It is highly suggested that you back up QUSRSYS in a restricted state. However, there are other ways to fully save QUSRSYS without having to be in a restricted state. See Methods to save Q libraries that contain user data.
How do I save objects that are active? See Saving your system while it is active for information about the save-while-active function.
How can I determine if everything on my system is backed up? See Determining objects that the system saved (save messages).
How do I transfer objects from one system to another system? There are a few ways to transfer objects from one system to another system.
- You can use the ObjectConnect Commands that is a set of control language (CL) commands to move the objects. See "Using the ObjectConnect Commands" in Backup and Recovery .
- You can save your objects to media, and then restore them on to the other system. See Manually saving parts of your system for more information.
See "How to Restore Specific Types of Information" in Backup and Recovery for more information.
How can I find out when an object was last saved? See Determining when an object was last saved.
Troubleshooting backup problems
Why do my backups take so long after I restart my system? Before an object can be saved, it must be loaded into main storage from disk storage. Often the objects that you are saving are already in main storage because you have been using the objects with your business applications. When you restart your system, all of the objects might be cleared out of main storage. Therefore, if you back up your system immediately after restarting it, the backup takes longer because all of the objects must be loaded into main storage before they can be saved.
The backup also performs additional processing the first time an object is accessed after a restart. The backup can run even slower if the previous restart was not normal.
If you want better performance in these scenarios, try the following methods:
- Avoid backups that coincide immediately after a restart.
- Access as many objects as possible between the restart and the start of the first backup. For example, submit a DSPOBJD or DSPFD. This loads more objects into main storage before a backup and limits the processing during the backup.
You can refer to Info APAR II12893 on the Support for IBM® System i™.
Why do my backups take longer after I upgrade to a new release? If you change any hardware during the upgrade, the hardware configurations might affect backup and recovery performance. See the chapter about save/restore performance in the System i Performance Capabilities Reference . Before an object is saved, it must be loaded into main storage from disk storage. Often the objects that you are saving are already in main storage because you have been using the objects with your business applications. When you upgrade your system, all of the objects might be cleared out of main storage. Therefore, if you back up your system immediately after upgrading it, the backup takes longer because all of the objects must be loaded into main storage before they can be saved.
If you want better performance in these scenarios, try the following methods:
- Avoid backups that coincide immediately after an upgrade.
- Access as many objects as possible between the upgrade and the start of the first backup. For example, submit a DSPOBJD or DSPFD. This loads more objects into main storage before a backup and limits the processing during the backup.
For more information, you can refer to Object conversions. You can also refer to the Memo to users for the release to see if the backup performs any conversions during the first backup.
Why do my backups take longer after I change hardware on my system? When you change hardware on your system, the hardware configuration might affect backup and recovery performance. See the chapter about save/restore performance in the System i Performance Capabilities Reference for information about hardware changes that might affect performance.
I am backing up only changed objects, but why is my tape filling up? The most likely cause for this problem is that you specify *NO on the Journaled Objects (OBJJRN) parameter of the Saving Changed Objects (SAVCHGOBJ) command. The OBJJRN parameter specifies whether changes to objects currently being entered in a journal as specified on the Start Journal Physical Files (STRJRNPF) are saved. If OBJJRN(*NO), which is the default, is specified, database files currently being journaled are not saved, unless journaling is started after the specified Reference date (REFDATE) and Reference time (REFTIME) parameters on the SAVCHGOBJ command.
This ensures that changes made to a physical file before journaling starts are not lost (because they were not journaled in a journal receiver). The date and time of the last journal start can be displayed by using the Display File Description (DSPFD) command.
When you journal database files, the system uses one or more journal receivers to keep a record of changes that occur to the journaled files. If you journal database files, you probably do not want to save those physical files when you save changed objects. You should save the journal receivers rather than the physical files.
Why are not all the changed objects saved when I am saving changed objects on my system? See Determining objects that are not saved.
Why are not all the objects in QUSRSYS being saved when I am saving the QUSRSYS library? Some of the objects in QUSRSYS might be active during the backup. You might need to be in a restricted state to back up all of the objects in that library. See Methods to save Q libraries that contain user data.
Why is my system not saving all of my libraries? See Determining objects that are not saved.
How do save commands handle damage on objects? See How the system handles damaged objects during a save operation.
Preparing for a recovery
What happens when I restore user profiles? See "What Happens When You Restore User Profiles" in Backup and Recovery .
What are the advantages in using RSTUSRPRF *ALL as opposed to individual profiles? See "What You Should Know About Restoring User Profiles" in Backup and Recovery .
What does the Restore Authority (RSTAUT) command do? Use the RSTAUT command to restore a user's private authorities to objects. See "Restoring Object Authorities" in Backup and Recovery .
What steps should I follow to reload my entire system? See the appendix about recovering your server in Backup and Recovery .
Basic recovery tasks
How do I reload my entire system? See the appendix about recovering your server in Backup and Recovery .
What should I follow if I want to reload my Licensed Internal Code? See "Recovering the Licensed Internal Code" in Backup and Recovery .
How do I reload my operating system? See "Restoring the Operating System" in Backup and Recovery .
How do I restore physical database files? See "Restoring Database Files" in Backup and Recovery .
How do I restore logical files? See "Restoring Logical Files" in Backup and Recovery .
How do I restore programs? See "How the System Restores Programs" in Backup and Recovery .
How do I restore an individual object from tape? See "How to Restore Objects" in Backup and Recovery .
How do I recover an independent ASP? See the following topics in Backup and Recovery for information about recovering an independent ASP:
- Choosing the Recovery Procedure for a Disk Failure or Disk Errors
- How to Recover an Independent ASP
Troubleshooting recovery problems
Why is my restore process taking a very long time? See the following information about restore performance in Backup and Recovery :
- Restoring database files
- How the system restores access paths
- How the system restores programs
Why am I experiencing authority errors after a restore operation? See the following information about handling authority errors after a restore operation in Backup and Recovery :
- Sequence for restoring security information
- Restoring user profiles
- Sequence for restoring security information