These database file entries contain data specific to system jobs.
| Field Name | Description | Attribute | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| INTNUM | Interval number: The nth sample database interval based on the start time specified in the Create Performance Data (CRTPFRDTA) command. | PD (5,0) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DTETIM | Interval date (yymmdd) for job interval entry and job completion date, and time (hhmmss) for job completion entry. | C (12) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| INTSEC | Elapsed interval seconds. | PD (7,0) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DTCEN | Century digit. | C (1) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| JBNAME | Job name/workstation name. | C (10) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| JBUSER | Job user. | C (10) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| JBNBR | Job number. | C (6) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| JBTYPE | Job type.
| C (1) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| JBSTYP | Job subtype.
| C (1) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| JBSTSF | Status flag: indicates job status relative to this interval. The values are:
Jobs that are rerouted or transferred will result in a termination record (JBSTSF = 2) and a new job record (JBSTSF = 1.) PD (1,0)
| JBSSYS
| Name of the subsystem the job is running in.
| C (10)
| JBSLIB
| Name of the library the subsystem description is in.
| C (10)
| JBROUT
| The routing entry index for the subsystem this job is in.
| PD (5,0)
| JBACCO
| Job accounting code. Field cannot be displayed.
| C (15)
| JBRSP
| Total transaction time (in seconds). | Certain i5/OS® functions support the concept of a transaction. The definition of a transaction and the characteristics of a transaction are different depending on the type of job or the specific function of the job. For interactive jobs, display I/O transactions are counted. The transaction starts on detection of enter from the workstation; the transaction ends when the keyboard is unlocked. For SNADS jobs, a transaction is the processing of a distribution. PD (15,3)
| JBNTR
| Number of transactions. | Certain i5/OS functions support the concept of a transaction. The definition of a transaction and the characteristics of a transaction are different depending on the type of job or the specific function of the job. For interactive jobs, display I/O transactions are counted. The transaction starts on detection of enter from the workstation; the transaction ends when the keyboard is unlocked. For SNADS jobs, a transaction is the processing of a distribution. PD (11,0)
| JBAIQT
| Total application input queuing time (in hundredths of a second).
| PD (15,1)
| JBNAIQ
| Number of application input queuing transactions.
| PD (11,0)
| JBRUT
| Total resource usage time (in seconds).
| PD (15,3)
| JBNRU
| Number of resource usage transactions.
| PD (11,0)
| JBPLN
| Number of print lines: Number of lines written by the program. This does not reflect what is actually printed. Spooled files can be ended, or printed with multiple copies.
| PD (11,0)
| JBPPG
| Number of print pages.
| PD (11,0)
| JBPFL
| Number of print files.
| PD (11,0)
| JBLWT
| Number of database writes (logical): Number of times the internal database write function was called. This does not include I/O operations to readers/writers,
or I/O operations caused by the CPYSPLF or DSPSPLF command. If SEQONLY(*YES)
is specified, these numbers show each block of records written, not the number of individual records written.
| PD (11,0)
| JBLRD
| Number of database reads (logical): Number of times the database module was called. This does not include I/O operations to readers/writers, or I/O operations caused by the CPYSPLF or DSPSPLF command. If SEQONLY(*YES) is specified,
these numbers show each block of records read, not the number of individual records read.
| PD (11,0)
| JBDBU
| Number of miscellaneous database operations: Updates, deletes, force-end-of-data,
commits, rollbacks, and releases (logical).
| PD (11,0)
| JBCPT
| Number of communications writes: These do not include remote workstation activity. They include only activity related to intersystem communications function (ICF) files when the I/O is for an intersystem communications function (ICF) device.
| PD (11,0)
| JBCGT
| Number of communications reads (logical): These do not include remote workstation activity. They include only activity related to intersystem communications function (ICF) files when the I/O is for an intersystem communications function (ICF) device.
| PD (11,0)
| JBSPD
| Total suspended time (in milliseconds.)
| PD (11,0)
| JBRRT
| Total time job waited during reroutes (in milliseconds.)
| PD (11,0)
| JBLND
| Line description: Name of the communications line this workstation and its controller are attached to. This is only available for remote workstations.
| C (10)
| JBCUD
| Controller description: Name of the controller this workstation is attached to.
| C (10)
| JB2LND
| Secondary line description (pass-through and emulation only.)
| C (10)
| JB2CUD
| Secondary controller description (pass-through and emulation only).
| C (10)
| JBIRN
| IOP resource name.
| C (10)
| JBDRN
| Device resource name.
| C (10)
| JBPORT
| Workstation port number.
| PD (3,0)
| JBSTN
| Workstation number.
| PD (3,0)
| JBPTSF
| Pass-through source flag.
| PD (1,0)
| JBPTTF
| Pass-through target flag.
| PD (1,0)
| JBEAF
| Emulation active flag.
| PD (1,0)
| JBPCSF
| iSeries™ Access application flag.
| PD (1,0)
| JBDDMF
| Target DDM job flag.
| PD (1,0)
| JBMRTF
| MRT flag.
| PD (1,0)
| JBS36E
| Is job running in System/36 environment? (Y/N)
| C (1)
| JBQT
| Total queuing time to enter the MRT (in hundredths of seconds).
| PD (11,0)
| JBMMT
| Total time spent at MRTMAX (in seconds).
| PD (11,0)
| JBNEQT
| Total number of entries into the MRT.
| PD (11,0)
| JBPUTN
| The number of times ACPUT was called to send user or control data.
Calls that result in no data being sent are not counted.
| PD (11,0)
| JBPUTA
| The total amount of user and control data that was sent by the user's program. This value does not include the LLID, MAPNAME, or FMH-7 data lengths.
| PD (11,0)
| JBGETN
| The number of times ACGET was called to receive user or control data.
Calls that result in no data being given to the user application will not be counted.
| PD (11,0)
| JBGETA
| The total amount of user and control data that was received by the user's program. This value does not include the LLID, MAPNAME, or FMH-7 data lengths.
| PD (11,0)
| JBPGIN
| The number of intervals that begin at the first put of a chain and end when CD is returned to the user.
| PD (11,0)
| JBPGIL
| The amount of time (in milliseconds) spent in intervals that begin at the first put of a chain and end when CD is returned to the user.
| PD (11,0)
| JBGGIL
| The amount of time (in milliseconds) spent in intervals that begin when the first get of a get chain completes and ends when the first get of a new chain is issued.
| PD (11,0)
| JBRTI
| This is the number of request I/O commands (REQIOs) issued to transmit data of any kind (including FMH-7s.)
| PD (11,0)
| JBRRI
| This is the number of REQIOs issued to receive data of any kind (including FMH-7s.)
| PD (11,0)
| JBXSLR
| File system symbolic link reads. This count includes the following file systems: Root, QOpenSys, and user-defined file systems.
| PD (11,0)
| JBXDYR
| File system directory reads. This count includes the following file systems: Root, QOpenSys, and user-defined file systems.
| PD (11,0)
| JBDLCH
| File system directory lookup cache hits.
| PD (11,0)
| JBDLCM
| File system lookup cache misses. This count includes the following file systems: Root, QOpenSys, and user-defined file systems.
| PD (11,0)
| JBSJNM
| Submitter's job name.
| C (10)
| JBSJUS
| Submitter's job user.
| C (10)
| JBSJNB
| Submitter's job number.
| C (6)
| JBSJFG
| Submitted job flag. This flag is designed to differentiate locally submitted jobs from jobs that are submitted from remote systems. Currently,
this flag supports locally submitted jobs only.
| C (1)
| JBRSYS
| Reserved.
| C (10)
| JBDEVN
| Reserved.
| C (10)
| JBRLNM
| Reserved.
| C (8)
| JBLLNM
| Reserved.
| C (8)
| JBMODE
| Reserved.
| C (8)
| JBRMNT
| Reserved.
| C (8)
| JBBUP
| Reserved.
| PD (11,0)
| JBBDL
| Reserved.
| PD (11,0)
| JBBFE
| Reserved.
| PD (11,0)
| JBBCO
| Database commit operations.
| PD (11,0)
| JBBRO
| Database rollback operations.
| PD (11,0)
| JBLBO
| The cumulative number of SQL cursors which have been full opened.
| PD (11,0)
| JBLBC
| Reserved.
| PD (11,0)
| JBLBI
| Reserved.
| PD (11,0)
| JBLBS
| The cumulative number of SQL cursors which have been pseudo-opened.
Pseudo-opens are also known as reused SQL cursors.
| PD (11,0)
| JBDQS
| Reserved.
| PD (11,0)
| JBDQR
| Reserved.
| PD (11,0)
| JBNDA
| Reserved.
| PD (11,0)
| JBNUS
| Reserved.
| PD (11,0)
| JBSIT1
| Reserved.
| PD (11,0)
| JBSIT2
| Reserved.
| PD (11,0)
| JBSIT3
| Reserved.
| PD (11,0)
| JBGRUP
| Job group.
| C (3)
| JBTDE
| System task identifier. This field cannot be displayed.
| C (8)
| JBFLAG
| Job flag (See notes.) Field cannot be displayed.
| C (2)
| JBSVRT
| Server type. The type of server represented by the job. A value of blank (or blank space) indicates that the job is not part of a server.
| For more information on server types, see Server jobs and Server table. C (30)
| JBFSOPN
| File system opens. This count includes the following file systems: Root, QOpenSys, and user-defined files systems.
| PD (11,0)
| JBFSDC
| File system directory creates. This count includes the following file systems: Root, QOpenSys, and user-defined files systems.
| PD (11,0)
| JBFSNDC
| File system non-directory creates. Count of create operations for non-directory objects such as files or symbolic links. This count includes the following file systems: Root, QOpenSys, and user-defined files systems.
| PD (11,0)
| JBFSDD
| File system directory deletes. This count includes the following file systems: Root, QOpenSys, and user-defined files systems.
| PD (11,0)
| JBFSNDD
| File system non-directory deletes. Count of delete operations for non-directory objects such as files or symbolic links. This count includes the following file systems: Root, QOpenSys, and user-defined files systems.
| PD (11,0) | |
| Bit |
| 0 Pass-through service |
| 1 Pass-through target |
| 2 Emulation active |
| 3 iSeries Access application |
| 4 Target DDM job |
| 5 MRT |
| 6-15 not used |