Server table

 

You can use this server table as a reference to find out how servers, server jobs, job descriptions, and subsystems are mapped to one another.

Use this table to locate a variety of information related to specific servers.

The first column provides the following information:

Server name:

The server name identifies the server. In most cases, this is the name of the server as it appears in iSeries™ Navigator.

To start:

The method that is used to start the server. Some servers are started by using CL commands, such as STRTCPSVR *DHCP. Other servers start when certain subsystems or jobs are started.

To end:

The method that is used to end the server. Some servers are ended by using CL commands, such as ENDTCPSVR *DHCP. Other servers end when certain subsystems are ended.

Product:

The name of the licensed product under which this server is shipped.

Server type:

The server type is a 30 byte character string that uniquely identifies the server to the system. All IBM-supplied servers have their server type begin with QIBM_. The server type is set by the server job using the Change Job API.

The subsequent columns provide the following information:

Job description:

The name and library of the job description that is used by this server's job to perform the work for this server. For example, QTCP/QTGSTELN indicates library QTCP and job description QTGSTELN.

Subsystem:

The name of the subsystem where this particular server runs.

Job name:

The name of the job(s) that are active for this server.

Shipped default value for Autostart servers parameter:

i5/OS® is shipped to you with certain default values specified for the Autostart servers parameter for many of the servers. When the value is set to *YES, the server will start automatically when TCP/IP is started. When the value is set to *NO, the server will not start automatically when TCP/IP is started. If the server does not support the Autostart servers function, then no value is indicated for this parameter.

To view or change the Autostart servers parameter, follow these steps:

  • From the character based interface:

    Type CHGxxxA at the i5/OS command line, where xxx is the name of the server. For example, CHGFTPA to work with the attributes of the FTP server. The Autostart servers parameter appears at the top of the list of parameters.

  • From iSeries Navigator:

    In iSeries Navigator, the equivalent of the Autostart servers parameter is indicated as one of the properties of a server, Start when TCP/IP is started.

    1. In iSeries Navigator, expand your system > Network > Servers.

    2. Click TCP/IP, iSeries Access, DNS, or User-Defined, depending on the type of server you want to view.

    3. In the right pane, right-click the server you want to view, such as FTP.

    4. On the General page, verify whether Start when TCP/IP is started is selected.

Default port:

The port from which the server job listens for client requests. Some of the ports indicate a service name within parentheses. This service name refers to the name that is defined in the Service Table Entries.

To view the Service Table Entries display, type WRKSRVTBLE at the i5/OS command line.

Server name Job description Subsystem Job name Shipped default value for autostart parameter Default port
ASFTomcat Basic Servlet and JSP Engine for the Apache Web Server

To Start:

STRTCPSVR *ASFTOMCAT

To End:

ENDTCPSVR *ASFTOMCAT

Product: 5722–DG1 *BASE option

Type: QIBM_ASFTOMCAT_xxxxx (where xxxxx is the name of the server instance)

Server: Is a standalone Web application servlet container. Through a socket connection, Web servers can use the various Web applications that an ASFTomcat server can provide.

QHTTPSVR/QZTC QSYSWRK Name of the instance (user defined) *NO 8009
Block I/O Daemon

To Start:

STRNFSSVR *BIO

To End:

ENDNFSSVR *BIO

Product: 5722–SS1

Type: QIBM_NFS_BIOD

Server: The Network File System client might use the Block I/O daemon to handle bulk I/O traffic.

QSYS/QP0LBIOD QSYSWRK QNFSBIOD* *NO No port is used
BootP DHCP Relay Agent

To Start:

STRTCPSVR *DHCP

To End:

ENDTCPSVR *DHCP

Product: 5722–SS1

Type: QIBM_BOOTP_DHCP_RA

Server: Forwards Bootstrap Protocol (BootP) and Dynamic Host Configuration Protocols (DHCP) packets from the local system to one or more different DHCP servers.

QSYS/QTODDJDS QSYSWRK QTODDHCPR *NO

67 (dhcps)
942

BootP Server

To Start:

STRTCPSVR *BOOTP

To End:

ENDTCPSVR *BOOTP

Product: 5722–SS1

Type: QIBM_BOOTP

Server: Provides a dynamic method for associating workstations with servers, or for assigning workstation IP addresses and initial program load (IPL) sources.

QSYS/QTODBTPJ QSYSWRK QTBOOTP *NO 67 (bootps)
CCServer Agent

To Start:

STRMGDSYS

To End:

ENDMGDSYS

Product: 5722–MG1

Type: QIBM_CCSERVER

Server: Handles the distribution of integrated file system objects that are sent to the change control server.

QSYS/QSYSWRK QSYSWRK QCQNCMPS Not applicable No port is used
Central Server

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QZSCSRVS), where subsystem name is QUSRWRK or the user-configured subsystem

To End: Ends when the subsystem ends

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_CENTRAL

QSYS/QZBSJOBD

QUSRWRK
or
configurable

QZSCSRVS *YES No port is used
Central Server Daemon

To Start:

STRHOSTSVR *CENTRAL

To End:

ENDHOSTSVR *CENTRAL

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_CENTRAL

QSYS/QZBSJOBD QSYSWRK QZSCSRVSD *YES

8470
(as-central)
9470
(as-central-s)

CIM Object Manager

To Start:

STRTCPSVR *CIMOM

To End:

ENDTCPSVR *CIMOM

Product: 5722–SS1

Type: QIBM_CIMOM

QSYS/QYCMJOBD QSYSWRK QYCMCIMOM N/A 5988 (wbem-http)
Cluster Resource Services

To Start: Starts via QSYSWRK subsystem autostart entry

To End: Ends when the QSYSWRK subsystem ends

Product: 5722–SS1

Type:

QIBM_CLUSTER_RESOURCE_SERVICES

Server: Provides the set of services necessary to support a clustered environment. A cluster is a collection of one or more systems that work together to provide a single, unified computing capability.

QSYS/QCSTSRCD QSYSWRK QCSTSRCD N/A No port is used
Cluster Resource Services

To Start: Starts when the daemon QCSTCTSRCD job starts

To End: Ends when the daemon QCSTCTSRCD job ends

Product: 5722–SS1

Type:

QIBM_CLUSTER_RESOURCE_SERVICES

QSYS/QCSTSRCD QSYSWRK

QCSTCTRMCD
QCSTCTCASD

N/A 657
Cluster Resource Services

To Start: Starts when the daemon QCSTCTRMCD job starts

To End: Ends when the daemon QCSTCTRMCD job ends

Product: 5722–SS1

Type:

QIBM_CLUSTER_RESOURCE_SERVICES

QSYS/QCSTSRCD QSYSWRK

QSVRMSERMD
QCSTHRMD
QYUSCMCRMD
QYUSALRMD

N/A No port is used
Cluster Resource Services

To Start:

APIs: Start Cluster Node, Create Cluster Resource Group, Create Cluster, or Add Cluster Node Entry

CL commands: STRCLUNOD, CRTCRG, CRTCLU, or ADDCLUNODE

To End: End Cluster Node API or ENDCLUNOD CL command

Product: 5722–SS1

Type:

QIBM_CLUSTER_RESOURCE_SERVICES

QGPL/QDFTJOBD QSYSWRK

QCSTCTL
QCSTCRGM
CRG-name

N/A No port is used
Cluster Resource Services

To Start:

APIs: Start Cluster Node, Create Cluster Resource Group, Create Cluster, or Add Cluster Node Entry

CL commands: STRCLUNOD, CRTCRG, CRTCLU, or ADDCLUNODE

To End: End Cluster Node API or ENDCLUNOD CL command

Product: 5722–SS1

Type:

QIBM_CLUSTER_RESOURCE_SERVICES

QSYS/QCSTSRCD QSYSWRK

QCSTCRGRM
QCSTSAM
QCSTCTCFRM

N/A No port is used
Clustered Hash Table (CHT) Server

To Start:

STRCHTSVR

To End:

ENDCHTSVR

Product: 5722–SS1

Type: QIBM_CHT

Server: Enables applications to store and retrieve data that must be highly available across the cluster.

QGPL/QDFTJOBD QSYSWRK Clustered Hash table (CHT) name N/A No port is used
Collection Services Server

To Start: Starts automatically when an application uses the QPMWKCOL function.

To End: Ends when there are no application requests for data collection.

Product: 5722–SS1

Type:

QIBM_COLLECTION_SERVICES

Server: Is a set of jobs that perform the system functions for collection services and real-time performance data collection.

QGPL/
QCOLJOBD

QSYSWRK QPMASERV N/A No port is used
Collection Services Server

To Start: Submitted by QYPSPFRCOL if configured (QYPSCSCA API or CHGPRFCOL CMD)

To End: Ends automatically when data collection (QYPSPFRCOL) ends or current collection is cycled (restarted).

Product: 5722–SS1

Type:

QIBM_COLLECTION_SERVICES

QSYS/QYPSJOBD QSYSWRK CRTPFRDT N/A No port is used
Collection Services Server

To Start: Starts by QPMASERV job

To End: Ends when QPMASERV ends.

Product: 5722–SS1

Type:

QIBM_COLLECTION_SERVICES

QGPL/QCOLJOBD QSYSWRK QPMACLCT N/A No port is used
Collection Services Server

To Start: QYPSSTRC API, GUI, or STRPRFCOL command. Can also be started by application requests for data.

To End: QYPSENDC API, GUI, or ENDPFRCOL and if there are no active application data requests.

Product: 5722–SS1

Type:

QIBM_COLLECTION_SERVICES

QSYS/QYPSJOBD QSYSWRK QYPSPFRCOL N/A No port is used
Collection Services Server

To Start: Starts when the QYPSPFRCOL job starts if user category is configured and collection is enabled

To End: Ends automatically when data collection (QYPSPFRCOL job) ends or current collection is cycled (restarted).

Product: 5722–SS1

Type:

QIBM_COLLECTION_SERVICES

QGPL/QPMUSRCAT QSYSWRK (default but depends on category owner JOBD) Category name N/A No port is used
Commerce Payments

To Start: Product-specific commands

To End: Product-specific commands

Product: 5733-PYS

Type: Not applicable

Subsystem of installed version of WebSphere® QSYSWRK User-specified name of the instance N/A Configurable
Connect FlowManager

To Start: Starts using Connect Web Admin interface

To End: Ends using Connect Web Admin interface

Product: 5733–CO2

Type: QIBM_CONNECT_FM

Server: This server takes extensible markup language (XML) request messages from the Connect Delivery Gateway. It routes those messages to a series of applications that process the request message and generates a response message.

Same as user profile QCONNECT

QBEFMNTR
QBEFSRVR

N/A No ports are used
Content Manager for iSeries

To Start:

STRTCPSVR

To End:

ENDTCPSVR

Product: 5722–VI1 *BASE and 5722–VI1 Option 1

Type: None

User-defined QSERVER or user-defined User-defined *NO User-defined
Controlled End TCP/IP Processing

To Start:

STRTCP

To End:

ENDTCP

Product: 5722–SS1

Type:

QIBM_TOC_ENDTCP_CONTROLED

Server: Ends the TCP/IP job in a controlled manner.

QSYS/QTOCTCPIP QSYSWRK QTCPEND N/A No port is used
Customer Information Control System (CICS®) TCP/IP Server

To Start:

STRCICS

To End:

ENDCICS

Product: 5722–DFH

Type: QIBM_CICS

Server: Provides CICS support over TCP/IP.

Specified in CICS's control region user profile CICS's control region subsystem AEGWPWKR and AEGWPSSN N/A 1435 (ibm-cics)
Database Server

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QZDASOINIT), where subsystem name is QUSRWRK or the user-configured subsystem

To End: Ends when the subsystem ends

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_DATABASE

QGPL/QDFTSVR QUSRWRK or configurable QZDASOINIT *YES No port is used
Database Server Daemon

To Start: STRHOSTSVR *DATABASE (Requires QSERVER up)

To End: ENDHOSTSVR *DATABASE

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_DATABASE

QSYS/QZBSJOBD QSERVER QZDASRVSD *YES

8471
as-database
8478
as-transfer
9471
as-database-s

Database SSL Server

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QZDASSINIT), where subsystem name is QUSRWRK or the user-configured subsystem

To End: Ends when the subsystem ends

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_DATABASE

QGPL/QDFTSVR QUSRWRK or configurable QZDASSINIT *YES No port is used
Datalink File Manager

To Start:

STRTCPSVR *DLFM

To End:

ENDTCPSVR *DLFM

Product: 5722–SS1

Type: QIBM_DLFM

Server: Allows database files to contain references to objects that are not traditionally stored inside a database file. Those objects can be video clips or pictures, and are stored in the integrated file system. The references can link to the objects on the same system or on other systems.

QGPL/QDFTJOBD QSYSWRK

QZDFMCOD
QZDFMCPD
QZDFMDGD
QZDFMGCD
QZDFMRTD
QZDFMSVR
QZDFMUPD

QZDFMCHD (A child server job that receives and processes DLFM requests as needed. Multiple instances of the QZDFMCHD job can run simultaneously.)

*NO 20001 (dlfm)
Data Queue Server

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QZHQSSRV), where subsystem name is QUSRWRK or the user-configured subsystem

To End: Ends when the subsystem ends

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_DTAQ

QSYS/QZBSJOBD QUSRWRK or configurable QZHQSSRV *YES No port is used
Data Queue Server Daemon

To Start:

STRHOSTSVR *DTAQ

To End:

ENDHOSTSVR *DTAQ

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_DTAQ

QSYS/QZBSJOBD QSYSWRK QZHQSRVD *YES

8472
(as-dtaq)
9472
(as-dtaq-s)

DB2® Text Extender Administration Server

To Start: SBMJOB invoked by dessrvsp stored procedure

To End: Ends automatically when task is complete. To interrupt abnormally, use ENDJOB.

Product: 5722–DE1 Option 1

Type:

QIBM_TEXT_EXTENDER_ADMIN

Server: Controls all Text Extender administration user commands.

QGPL/QDFTJOBD QSYSWRK DESSRVBG N/A No port is used
DB2 Text Extender Daemon

To Start: SBMJOB invoked by CALL PGM(QDB2TX/TXSTART)

To End: CALL PGM(QDB2TX/TXSTOP)

Product: 5722–DE1 Option 1

Type:

QIBM_TEXT_EXTENDER_DAEMON

Server: Controls the scheduling for automatic updates of the Text Extender.

QGPL/QDFTJOBD QSYSWRK DESDEM N/A No port is used
DB2 Text Extender Update Index Server

To Start: SBMJOB invoked by desdem program

To End: Ends automatically when task is complete. To interrupt abnormally, use ENDJOB.

Product: 5722–DE1 Option 1

Type:

QIBM_TEXT_EXTENDER_UPDATE

Server: Maintains the Text Extender log tables and triggers index updates by scheduling documents that are referenced in the log tables.

QGPL/QDFTJOBD QSYSWRK DESXCTL N/A No port is used
Dynamic Host Configuration Protocol (DHCP) server

To Start:

STRTCPSVR *DHCP

To End:

ENDTCPSVR *DHCP

Product: 5722–SS1

Type: QIBM_DHCP

Server: Passes configuration information to hosts on a TCP/IP network. DHCP enables client systems to get network configuration information, including an IP address, from a central DHCP server.

QSYS/QTODDJDS QSYSWRK QTODDHCPS *NO

67 (dhcps)
942

Domain Name System (DNS) server

To Start:

STRTCPSVR *DNS

To End:

STRTCPSVR *DNS

Product: 5722–SS1 Option 31

Type: QIBM_DNS

Server: Maintains a database of domain (host) names and their corresponding IP addresses. It defines a mapping between the host name and the IP addresses in a centralized location. Systems within the TCP/IP network can use the lookup function of the DNS server to locate the IP for that system.

QDNS/QTOBJOBD QSYSWRK

QTOBDNS (BIND 4)

QTOBDxxxxx (BIND 8, xxxxx chosen by customer)

*NO 53 (domain)
Domino® server

To Start:

STRTCPSVR *DOMINO
or
STRDOMSVR

To End:

ENDTCPSVR *DOMINO
or
ENDDOMSVR

Product:

Domino 6.0.x: 5733–LD6

Domino 6.5.x: 5733–L65 or later

Type: QIBM_DOMINO

Server: Runs on multiple hardware and operating system platforms. Lotus® Domino includes e-mail, groupware, workflow, calendar and scheduling, and Web server functions.

Same as subsystem Notes® subsystem or configurable Job names vary *NO Configurable (typically 1352)
DRDA® DDM Server TCP/IP

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QGPL/QRWTSRVR), where subsystem name is QUSRWRK or the user-configured subsystem

To End: Ends when the subsystem ends

Product: 5722–SS1

Type:

QIBM_OS400_QRW_SVR_DDM_DRDA

Server: Allows a TCP/IP user on a remote client system to use SQL or native file I/O (DDM) to access the database on the i5/OS operating system. The DDM server allows applications or users to access remote databases.

QGPL/QDFTSVR QUSRWRK or configurable QRWTSRVR *YES No port is used
DRDA DDM Server TCP/IP Listener

To Start:

STRTCPSVR *DDM

To End:

ENDTCPSVR *DDM

Product: 5722–SS1

Type:

QIBM_OS400_QRW_SVR_DDM_DRDA

jobd in QUSER profile (defaults to QGPL/QDFTJOBD) QSYSWRK QRWTLSTN *YES

446
(drda)
447
(ddm)
448
(ddm-ssl)

Extended Dynamic Remote SQL

To Start:

STRTCPSVR *EDRSQL

To End:

ENDTCPSVR *EDRSQL

Product: 5722–SS1

Type: QIBM_EDRSQL

Server: Performs extended dynamic SQL and related functions on either a remote or local system. For more information, see APIs by category

QSYS/QXDAJOBD QSYSWRK QXDAEDRSQL *NO 4402 (as-edrsql)
E-Z Setup Servers

To Start: Starts via QSYSWRK subsystem autostart entry

To End: Ends when QSYSWRK subsystem is ended

Product: 5722–SS1

Type: QIBM_ALTCOMM

QSYS/QNEOJOBD QSYSWRK QNEOSOEM N/A No port is used
File Server Daemon and Server

To Start: STRHOSTSVR *FILE (Requires QSERVER up)

To End: ENDHOSTSVR *FILE

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_FILE

QSYS/QZBSJOBD QSERVER QPWFSERVSD *YES

8473
(as-file)
8477
(as-netdrive)
9473
(as-file-s)

File Server S2

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QPWFSERVS2), where subsystem name is QSERVER or the user-configured subsystem

To End: ENDSBS QSERVER (or user configured subsystem)

Product: 5722–SS1

Type: QIBM_NETDRIVE

QGPL/QDFTSVR QSERVER or configurable QPWFSERVS2 *YES No port is used
File Server SO

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QPWFSERVSO), where subsystem name is QSERVER or the user-configured subsystem

To End:

ENDSBS QSERVER
(or user configured subsystem)

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_FILE

QGPL/QDFTSVR QSERVER or configurable QPWFSERVSO *YES No port is used
File Server SSL Server

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QPWFSERVSS), where subsystem name is QSERVER or the user-configured subsystem

To End:

ENDSBS QSERVER
(or user configured subsystem)

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_FILE

QGPL/QDFTSVR QSERVER or configurable QPWFSERVSS *YES No port is used
File Transfer Protocol (FTP) server

To Start:

STRTCPSVR *FTP

To End:

ENDTCPSVR *FTP

Product: 5722–TC1

Type: QIBM_FTP

Server: Transfers data between local and remote hosts. FTP consists of a client, from which FTP requests are issued, and the server, where client requests are processed.

QUSRSYS/QTMFTPS QSYSWRK or configurable QTFTP* *YES

21
(ftp-control)
990
(ftps-control)

Graphical Debug Server (Hub)

To Start:

STRTCPSVR *DBG

To End:

ENDTCPSVR *DBG

Product: 5722–SS1

Type: QIBM_DEBUG_SERVER

Server: Debugs i5/OS programs using a graphical debug user interface. The graphical debug user interface runs on your desktop and communicates with the Debug server using TCP/IP.

QGPL/QDFTJOBD QSYSWRK QTESDBGHUB *NO 4026 (as-debug)
Graphical Debug Server

To Start: Started by the QTESDBGHUB server in the previous entry and is attached to a user interface

To End: Ends when the user interface quits

Product: 5722–SS1

Type: QIBM_DEBUG_SERVER

Job description that is indicated in the debug user profile QUSRWRK QTESDBGSVR *NO No port is used

Help Server

To Start: Starts with the STRTCPSVR command, or the scripts in the Qshell environment (/QIBM/ProdData/OS400/Eclipse/EclipseStart), or from the HTTP Admin server interface.

To End: Ends with the ENDTCPSVR command, or the scripts in the Qshell environment (/QIBM/ProdData/OS400/Eclipse/EclipseStop), or from the HTTP Admin server interface.

Product: SS03

Type: HTTP/web application

Description: Is an Eclipse-based Information Center that is used to deliver Help documentation.

QGPL/QDFTSVR QSYSWRK QIBMHELP Yes 4111
HTTP Server

To Start:

STRTCPSVR *HTTP

To End:

ENDTCPSVR *HTTP

Product: 5722–DG1 *BASE option

Type: QIBM_HTTP_xxxxx (where xxxxx is the name of the server instance)

Server: Allows you to server multimedia objects, such as hypertext markup language (HTML) documents, to World Wide Web browser clients with your system.

QHTTPSVR/
QZHBHTTP

QHTTPSVR/
QZHBHTTP

QHTTPSVR Name of the instance (for example, ADMIN) *NO

80 (www-http)

2001 (as-admin-http)

2010 (as-admin-https)

IBM® Director

To Start:

Qshell script

/qibm/userdata/director/bin/twgstart

To End:

Qshell script

/qibm/userdata/director/bin/twgend

Product: 5722-DR1

Type:

QIBM_DIRECTOR_AGENT
QIBM_DIRECTOR

Server: Provides basic functions, such as discovery of the managed systems, storage of configuration and management data, an inventory database, event listening, security and authentication, management console support, and administrative tasks.

QCPMGTDIR/
QCPMGTDIR

QCPMGTDIR
QCPMGTDIR

QSYSWRK

QCPMGTAGT
QCPMGTSVR

N/A

14247
14248

IBM Directory Server

To Start:

STRTCPSVR *DIRSRV

To End:

ENDTCPSVR *DIRSRV

Product: 5722–SS1

Type: QIBM_DIRSRV_SERVER

Server: Is a Lightweight Directory Access Protocol (LDAP) server. The Directory server allows LDAP-enabled applications, such as mail applications that look up e-mail addresses, to store and retrieve information using the LDAP.

QSYS/QDIRSRV QSYSWRK QDIRSRV *YES

389 (ldap)
636 (ldaps)

InfoPrint Server Font Downloader

To Start:

STRFNTDWN

To End:

ENDFNTDWN

Product: 5722–IP1

Type:

QIBM_IPS_FONTDOWNLOADER

Server: Listens on a TCP/IP port for Infoprint® Manager Double-Byte Character Set (DBCS) Font Downloader connections. After connecting, new or refreshed PostScript fonts can be sent to the system for use with Infoprint server. The font downloader job receives and installs these fonts.

QGPL/QDFTJOBD QUSRWRK QXTFRNTDWN N/A 8251
InfoPrint Server for iSeries Transform Job

To Start: Spawned by transform manager

To End: Ended by transform manager

Product: 5722-IP1

Type: QIBM_IPS_TRANSFORM_JOB

Server: Converts Adobe PDF 1.3 and PS Level 3 data streams to IBM Advanced Function Presentation™ (AFP™) data stream. This transform is indirectly called through the Image Print Transform function of i5/OS.

QGPL/QDFTJOBD QUSRWRK

QADBDAEMON
QXIODAEMON

N/A No port is used
InfoPrint Server for iSeries Transform Manager

To Start:

STRTFMMGR

To End:

ENDTFMMGR

Product: 5722-IP1

Type: QIBM_IPS_TRANSFORM_MGR

Server: Manages heavyweight data stream transform jobs for InfoPrint Server/400-provided transforms.

QGPL/QDFTJOBD QUSRWRK QXTRTFMMGR N/A No port is used
Internet Daemon (INETD) Super Server

To Start:

STRTCPSVR *INETD

To End:

ENDTCPSVR *INETD

Product: 5722–SS1

Type: QIBM_INETD

Server: Listens for client requests for many different programs. Using INETD saves system resources by not requiring processes to be started and listing on ports for services that are not used often. When a client request is received, INETD generates a process to run the configured program to handle the request.

QSYS/QTOINETD QSYSWRK QTOGINTD *NO

13 (daytime)
37 (time)

Internet PTF Delivery Server

To Start: Starts on demand by iPTF process

To End: Ends by the iPTF process

Product: 5722–SS1

Type: QIBM_PTF

Server: Allows you to order and download PTFs using the Internet.

Varies, based on user profile starting server QSYSWRK QESISRV N/A Dynamically assigned
iSeries Access for Web PDF Server

To Start: Started by the iSeries Access for Web printer servlet support when any user needs to transform a spooled file to PDF using InfoPrint Server support.

To End: Ends when you end the QIWAPDFSRV job.

Product: iSeries Access for Web (5722–XH2)

Type: QIBM_IWA_PDF_SVR

jobd in QUSER profile (defaults to QGPL/QDFTJOBD) QSYSWRK

QIWAPDFSRV
QJVACMDSRVA

N/A 8490 (as-iwapdfsrv)
iSeries NetServer™ Daemon

To Start:

STRTCPSVR *NETSVR

To End:

ENDTCPSVR *NETSVR

Product: 5722–SS1

Type: QIBM_NETSERVER

QSYS/QZLSSERVER QSERVER QZLSSERVER *YES

137 TCP (netbios-ns)

137 UDP (netbios-ns)

138 UDP (netbios-dgm)

139 TCP (netbios-ssn)

445 TCP (cifs)

iSeries NetServer

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QZLSFILE), where subsystem name is QSERVER or the user-configured subsystem

To End: ENDSBS QSERVER (or user configured subsystem)

Product: 5722–SS1

Type: QIBM_NETSERVER

Server: Enables Microsoft® Windows® and Linux® Samba clients to access shared directory paths and shared output queues on the system. Clients on a network use the file and print-sharing functions for their operating systems.

QGPL/QDFTSVR QSERVER or configurable QZLSFILE *YES QNo port is used

Job Log Server

To Start: Starts when QSYSWRK subsystem is started, or with the STRLOGSVR command.

To End: Ends when the QSYSWRK subsystem ends, or with the ENDLOGSVR command.

Product: 5722–SS1

Type: QIBM_JOBLOG_SERVER

Description: Generates spooled job logs in the background.

QSYS/QJOBLOGSVR
QSYS/QJOBLOGAJ

QSYSWRK QJOBLOGSVR N/A No port is used
LDAP Publishing Agent

To Start: Starts when QSYSWRK subsystem is started

To End: Ends when QSYSWRK subsystem is ended

Product: 5722–SS1

Type: QIBM_DIRSRV_PUB_AGENT

Server: Publishes or stores information in a Directory Services (LDAP) server. Multiple jobs of this type can be running on a given system, each publishing a different type of information.

QSYS/QGLDPUBA QSYSWRK QGLDPUBA N/A No port is used
LDAP Publishing Engine

To Start: Starts when QSYSWRK subsystem is started

To End: Ends when QSYSWRK subsystem is ended

Product: 5722–SS1

Type: QIBM_DIRSRV_PUB_ENGINE

Server: Asynchronously processes LDAP publishing requests made with the QgldPubDirObj API.

QSYS/QGLDPUBE QSYSWRK QGLDPUBE N/A No port is used
Licensed Internal Code 3494 TCP/IP Tape Server

To Start: Started by the Licensed Internal Code when a 3494 tape library is varied on.

To End: Ended by the Licensed Internal Code when the last 3494 tape library is varied off.

Product: 5722–999

Type: QIBM_TASK_TCPIPTAPE

None None None N/A 3494 (ibm3494)
Line Printer Daemon (LPD)

To Start:

STRTCPSVR *LPD

To End:

ENDTCPSVR *LPD

Product: 5722–TC1

Type: QIBM_LPD

Server: Receives files sent by the Line Printer Request (LPR). You can use the LPD server to receive spooled files from another system, or you can use the LPD server to receive print output from another system.

QTCP/QTMPLPD QSYSWRK QTLPD* *NO 515 (lpd)
Managed System Agent

To Start:

STRMGDSYS

To End:

ENDMGDSYS

Product: 5722-MG1

Type: QIBM_MANAGED_SYSTEM

Server: Monitors scheduled jobs and the control language (CL) input streams that are run as a result of activities received from the central site system.

QSYS/QSYSWRK QSYSWRK QCQEPMON N/A No port is used
Management Central Agent

To Start: Started by main Management Central Server as needed

To End: Not applicable

Product: 5722–SS1

Type:

QIBM_MGMTCENTRAL_AGENT

Server: Performs work for the Management Central server.

QSYS/QYPSJOBD QSYSWRK

QYPSAPI
QYPSPTF
QYPSRMTCMD
QYPSGETINV
QYPSPRC
QYPSUSRADM
QYPSBDTSVR

*YES No port is used
Management Central Server

To Start:

STRTCPSVR *MGTC

To End:

ENDTCPSVR *MGTC

Product: 5722–SS1

Type: QIBM_MGMTCENTRAL

Server: Manages multiple systems from a single system in the TCP/IP network. You use this central system to manage the other systems (called endpoint systems) in your network. Once you add endpoint systems to your network, you only need to do your system administration tasks once. Your central system initiates your tasks and stores all Management Central data.

QSYS/QYPSJOBD QSYSWRK QYPSJSRV *YES

5544 (as-mgtcrlj)

5555 (as-mgtctrl)

5566 (as-mgtctrl-ss)

5577 (as-mgtctrl-cs)

Mount Server

To Start:

STRNFSSVR *MNT

To End:

ENDNFSSVR *MNT

Product: 5722–SS1

Type: QIBM_NFS_MNTD

Server: Is a Remote Procedure Call (RPC) registered Network File System (NFS) service that handles mount and unmount requests for NFS clients.

QSYS/QP0LMNTD QSYSWRK QNFSMNTD *NO No port is used
MQ Series Server

To Start:

STRMQMLSR

To End:

ENDMQMLSR

Product: 5724-B41

Type: QIBM_MQSERIES

Server: Provides the infrastructure for mission-critical communication between applications, either within an organization or business to business.

QMQM/QMQMJOBD QSYSWRK RUNMQLSR N/A 1414
Network Lock Manager

To Start:

STRNFSSVR *NLM

To End:

ENDNFSSVR *NLM

Product: 5722–SS1

Type: QIBM_NFS_NLMD

Server: Is a RPC-registered NFS service that provides byte-range locking for NFS files.

QSYS/QP0LLCKD QSYSWRK QNFSNLMD *NO No port is used
Network Print Server

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QNPSERVS), where subsystem name is QUSRWRK or the user-configured subsystem

To End: Ends when the subsystem ends

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_NETPRT

QSYS/QZBSJOBD QUSRWRK or configurable QNPSERVS *YES No port is used
Network Print Server Daemon

To Start:

STRHOSTSVR *NETPRT

To End:

ENDHOSTSVR *NETPRT

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_NETPRT

QSYS/QZBSJOBD QSYSWRK QNPSERVD *YES

8474
(as-netprt)
8479
(as-vrtprint)
9474
(as-netprt-s)

Network Station® Login Daemon

To Start:

CALL QYTCV2/QYTCUSVR ('STRTCPSVR ')

To End:

CALL QYTCV2/QYTCUSVR ('ENDTCPSVR ')

Product: 5648–C07

Type: QIBM_NSLOGIN

Server: Allows IBM Network Stations and other applications that use remote authentication protocol (RAP) to authenticate on the i5/OS operating system.

QYTCV2/
QYTCNSLD

QYTCV2/
QYTCNSLD

QSYSWRK QYTCNSLD *NO 256
Network Status Monitor (NSM)

To Start:

STRNFSSVR *NSM

To End:

ENDNFSSVR *NSM

Product: 5722–SS1

Type: QIBM_NFS_NSMD

Server: Provides applications with information about the status of network hosts. The Network Lock Manager (NLM) daemon uses the NSM to track network hosts that have locks.

QSYS/QP0LSTATD QSYSWRK QNFSNSMD *NO No port is used
NFS Server

To Start:

STRNFSSVR *SVR

To End:

ENDNFSSVR *SVR

Product: 5722–SS1

Type: QIBM_NFS_NFSD

Server: Stores files on a system and allows clients in the network to access and use the single set of files. NFS is typically used to share files among UNIX-type systems.

QSYS/QP0LNFSD QSYSWRK QNFSNFSD* *NO 2049
OnDemand Daemon

To Start:

STRTCPSVR *ONDMD

To End:

ENDTCPSVR *ONDMD

Product: 5722–RD1 Option 5

Type: QIBM_ON_DEMAND

QRDARS/
QRDARS400

QRDARS/
QRDARS400

QSYSWRK QRLGMGR *YES 1445
OnDemand Common Server

To Start:

STRTCPSVR *ONDMD

To End:

ENDTCPSVR *ONDMD

Product: 5722–RD1 Option 10

Type: QIBM_ON_DEMAND

QRDARS/QOND400 QSYSWRK Instance name *YES 1450
OnDemand Server

To Start:

STRTCPSVR *ONDMD

To End:

ENDTCPSVR *ONDMD

Product: 5722–RD1 Option 5

Type: QIBM_ON_DEMAND

Server: Lets you store large amounts of historical data on a disk, high-capacity optical volumes, or tape. It also provides quick access to stored data by online retrieval.

QRDARS/
QRDARS400

QRDARS/
QRDARS400

QSYSWRK QRLGSRV *YES 1445
Open List Server

To Start: Dynamically starts when needed

To End: Ends when no longer needed

Product: 5722–SS1

Type: QIBM_OS400_QGYE_SVR

Server: Handles the asynchronous building of lists by Open List APIs.

Varies Variable (usually same as QZRCSRVS job) QGYSERVER N/A No port is used
Portable Applications Solutions Environment (PASE) syslog

To Start: Starts by running /usr/sbin/syslogd in i5/OS PASE

To End: ENDJOB CL command or the kill utility in i5/OS PASE

Product: 5722-SS1 Option 33

Type: Not applicable

Varies (User can choose) Varies (User can choose) PGM-syslogdAlso user-defined N/A UDP 514 (syslog)
Post Office Protocol (POP)

To Start:

STRTCPSVR *POP

To End:

ENDTCPSVR *POP

Product: 5722–TC1

Type: QIBM_POP

Server: Allows the system to store e-mail for clients who use POP for their e-mail. E-mail is stored on the server until clients request it, at which time the mail is forwarded to the client and deleted from the server.

QTCP/QTMMTPS QSYSWRK QTPOP* *NO 110 (pop3)
QoS Policy Agent

To Start:

STRTCPSVR *QOS

To End:

ENDTCPSVR *QOS

Product: 5722–SS1

Type: QIBM_QOS

Server: Provides Network Quality of Service functions for the system. These services include: Differentiated Services that allow a user to specify special handling for TCP/IP connections and Integrated Services that allow applications using the RSVP internet protocol to request special handling for TCP/IP connections.

QSYS/QTOQJOBDR QSYSWRK QTOQSRVR *NO No port is used
QoS RSVP Agent

To Start:

STRTCPSVR *QOS

To End:

ENDTCPSVR *QOS

Product: 5722–SS1

Type: QIBM_QOS

QSYS/QTOQJOBDR QSYSWRK QTOQRAGENT *NO 1698
QuickPlace® Server

To Start:

STRTCPSVR *LQP
or
STRLQPSVR

To End:

ENDTCPSVR *LQP
or
ENDLQPSVR

Product: 5733-LQP

Type: QIBM_QUICKPLACE

Server: Allows non-technical professionals to create, tailor, and administer an electronic shared workspace to support a project or initiative. With browser access to an intranet or the Internet, authorized team members can access the workspace to communicate, share ideas, maintain a project calendar, and organize team information.

Same as subsystem QPLACE00 or Notes subsystem Configurable *NO Same as Domino HTTP task (typically 80)
Remote Command Agent

To Start:

STRMGDSYS

To End:

ENDMGDSYS

Product: 5722–MG1

Type: QIBM_REMOTE_COMMAND

Server: Accepts the remote commands from central site systems. From any location in your network, you can send commands to run on distributed systems that have Managed System Services installed.

QSVMSS/QVARRCV QSYSWRK QVARRCV N/A No port is used
Remote Command Server

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QZRCSRVS), where subsystem name is QUSRWRK or the user-configured subsystem

To End: Ends when the subsystem ends

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_RMTCMD

QSYS/QZBSJOBD QUSRWRK or configurable QZRCSRVS *YES No port is used
Remote Command Server Daemon

To Start:

STRHOSTSVR *RMTCMD

To End:

ENDHOSTSVR *RMTCMD

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_RMTCMD

QSYS/QZBSJOBD QSYSWRK QZRCSRVSD *YES

8475
(as-rmtcmd)
9475
(as-rmtcmd-s)

Remote Execution (RExec)

To Start:

STRTCPSVR *REXEC

To End:

ENDTCPSVR *REXEC

Product: 5722–TC1

Type: QIBM_REXEC

Server: Allows a client user to send system commands to a remote system for processing. When RExec receives a client request, it first validates the user profile and password and then runs the requested command. The results are returned to the client.

QTCP/QTMXRXCS QSYSWRK QTRXC* *NO 512 (exec)
RouteD

To Start:

STRTCPSVR *ROUTED

To End:

ENDTCPSVR *ROUTED

Product: 5722–SS1

Type: QIBM_ROUTED

Server: Provides dynamic routing. Dynamic routing deals with the ability to determine how to route traffic based upon a changing network topology.

QSYS/QTOROUTED QSYSWRK QTRTD* *NO UDP 520 (routed)
Remote Procedure Call (RPC)

To Start:

STRNFSSVR *RPC

To End:

ENDNFSSVR *RPC

Product: 5722–SS1

Type: QIBM_NFS_RPCD

Server: Runs Network File System daemons and other commands.

QSYS/QP0LRPCD QSYSWRK QNFSRPCD *NO 111 (sunrpc)

Secure Shell daemon (SSHD)

To Start: Starts by running /usr/sbin/sshd in i5/OS PASE.

To End: Ends by using the ENDJOB command or the kill utility in i5/OS PASE.

Product: 5733–SC1

Type: Not applicable.

Description: Accepts incoming secure shell protocol (SSH) connections. SSH verifies the authenticity of the client and the server. All of the data is encrypted as it travels on the network.

Varies Varies PGM-sshd or user-defined name Not applicable 22 (ssh)
Server Port Mapper

To Start:

STRHOSTSVR *SVRMAP

To End:

ENDHOSTSVR *SVRMAP

Product: 5722–SS1

Type:

QIBM_OS400_QZBS_SVR_SVRMAP

Server: Allows the client to find the port of the particular service. The client sends in a request with the service name, and the port mapper looks up the service in the service table and returns the port number to the client.

QSYS/QZBSJOBD QSYSWRK QZSOSMAPD *YES 449 (as-svrmap)
Service Agent Hardware Problem Reporting

To Start: Started by autostart job, or STRSRVAGT command

To End: ENDSRVAGT command

Product: 5722–SS1

Type: QIBM_SERVICE_AGENT_PRB

QSYS/QS9SRVAGT QSYSWRK

QS9PRBMON
QS9PALMON

N/A No port is used
Service Agent Inventory Transmission

To Start: Submitted from QYPSSRV

To End:

ENDJOB

Product: 5722–SS1

Type: QIBM_SERVICE_AGENT_INV

QSYS/QSJINV QSYSWRK QYIVRIPS N/A No port is used
Signon Server Daemon

To Start:

STRHOSTSVR *SIGNON

To End:

ENDHOSTSVR *SIGNON

Product: 5722–SS1

Type: QIBM_OS400_QZBS_SVR_SIGNON

QSYS/QZBSJOBD QSYSWRK QZSOSGND *YES

8476
(as-signon)
9476
(as-signon-s)

Signon Server

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(subsystem name) PGM(QSYS/QZSOSIGN), where subsystem name is QUSRWRK or the user-configured subsystem

To End: Ends when the subsystem ends

Product: 5722–SS1

Type: QIBM_OS400_QZBS_SVR_SIGNON

QSYS/QZBSJOBD QUSRWRK or configurable QZSOSIGN *YES No port is used
Simple Network Time Protocol Service

To Start:

STRTCPSVR *NTP

To End:

ENDTCPSVR *NTP

Product: 5722–SS1

Type: QIBM_NTP

Server: Provides time synchronization services to other systems.

QSYS/QTOTNTP QSYSWRK QTOTNTP *NO 123 (ntp)
Simple Mail Transfer Protocol (SMTP) Bridge Client

To Start:

STRTCPSVR *SMTP

To End:

ENDTCPSVR *SMTP

Product: 5722–TC1

Type: QIBM_SMTP_BR_CLIENT

Server: Converts Systems Network Architecture distribution services (SNADS) outbound mail to simple SMTP mail for an SMTP client to send.

QUSRSYS/
QTMSMTPS

QSYSWRK or configurable QTSMTPBRCL *YES No port is used
SMTP Bridge Server

To Start:

STRTCPSVR *SMTP

To End:

ENDTCPSVR *SMTP

Product: 5722–TC1

Type: QIBM_SMTP_BR_SERVER

Server: Creates an mail server framework (MSF) message and stream file from the inbound mail received from the SMTP server.

QUSRSYS/
QTMSMTPS

QSYSWRK or configurable QTSMTPBRSR *YES No port is used
SMTP Client Daemon

To Start:

STRTCPSVR *SMTP

To End:

ENDTCPSVR *SMTP

Product: 5722–TC1

Type: QIBM_SMTP_CLIENT

QUSRSYS/
QTMSMTPS

QSYSWRK or configurable QTSMTPCLTD *YES No port is used
SMTP Client

To Start: Starts when the client daemon job QTSMTPCLTD starts the client prestart jobs

To End: Ends when the client daemon job QTSMTPCLTD ends the client prestart jobs

Product: 5722–TC1

Type: QIBM_SMTP_CLIENT

Server: Allows end-to-end delivery of mail from one mail server to another. A direct connection exists between the SMTP sender and the destination SMTP receiver. The client keeps the mail at the sender until it transmits and copies it.

QUSRSYS/
QTMSMTPS

QSYSWRK or configurable QTMSCLCLTP *YES No port is used
SMTP Mail Scheduler

To Start:

STRTCPSVR *SMTP
when configured

To End:

ENDTCPSVR *SMTP

Product: 5722–TC1

Type: QIBM_SMTP_MAIL_SCHED

Server: Sets the time intervals that you want the system to connect to your Internet service provider (ISP) and send your e-mail.

QUSRSYS/
QTMSMTPS

QSYSWRK or configurable QTSMTPSCH *YES No port is used
SMTP Server Daemon

To Start:

STRTCPSVR *SMTP

To End:

ENDTCPSVR *SMTP

Product: 5722–TC1

Type: QIBM_SMTP_SERVER

QUSRSYS/
QTMSMTPS

QSYSWRK or configurable QTSMTPSRVD *YES 25 (smtp)
SMTP Server

To Start: Starts when the server daemon job QTSMTPSRVD starts the server prestart jobs

To End: Ends when the server daemon job QTSMTPSRVD ends the server prestart jobs

Product: 5722–TC1

Type: QIBM_SMTP_SERVER

Server: Allows end-to-end delivery of mail from one mail server to another. A direct connection exists between the SMTP sender and the destination SMTP receiver. The client keeps the mail at the sender until it transmits and copies it.

QUSRSYS/
QTMSMTPS

QSYSWRK or configurable QTSMTPSRVP *YES No port is used
Simple Network Management Protocol (SNMP) Agent

To Start:

STRTCPSVR *SNMP
(Cannot be started from iSeries Navigator)

To End:

ENDTCPSVR *SNMP
(Cannot be ended from iSeries Navigator)

Product: 5722–SS1

Type: QIBM_SNMP

Server: Supports the exchange of network management messages and information among hosts.

QSYS/QSYSWRK QSYSWRK QSNMPSA *NO No port is used
SNMP Agent

To Start:

STRTCPSVR *SNMP
(Cannot be started from iSeries Navigator)

To End:

ENDTCPSVR *SNMP
(Cannot be ended from iSeries Navigator)

Product: 5722–SS1

Type: QIBM_SNMP

QSYS/QTMSNMP QSYSWRK QTMSNMPRCV *NO 161 (snmp)
SNMP Agent

To Start:

STRTCPSVR *SNMP
(Cannot be started from iSeries Navigator)

To End:

ENDTCPSVR *SNMP
(Cannot be ended from iSeries Navigator)

Product: 5722–SS1

Type: QIBM_SNMP

QSYS/QTMSNMP QSYSWRK QTMSNMP *NO No port is used
SNMP Trap Manager

To Start:

STRTRPMGR
(Cannot be started from iSeries Navigator)

To End:

ENDTRPMGR
(Cannot be ended from iSeries Navigator)

Product: 5722–SS1

Type: QIBM_SNMP

QSYS/QTMSNMP QSYSWRK QTRPMGR *NO No port is used
SNMP Trap Manager

To Start:

STRTRPMGR
(Cannot be started from iSeries Navigator)

To End:

ENDTRPMGR
(Cannot be ended from iSeries Navigator)

Product: 5722–SS1

Type: QIBM_SNMP

QSYS/QTMSNMP QSYSWRK QTRPRCV *NO 162 (snmp-trap)
SQL

To Start: Automatically started at first use of a function that needs the server, such as server mode SQL.

To End:

ENDPJ SBS(QSYSWRK) PGM(QSQSRVR)

Product: 5722-ST1

Type: QIBM_SQL

Server: Processes SQL statements from an application that is running SQL in server mode. In server mode, each SQL connection is processed by a separate job.

QGPL/QDFTSVR QSYSWRK QSQSRVR *NO No port is used
System Manager

To Start:

STRSYSMGR

To End:

ENDSYSMGR

Product: 5722-SM1

Type: QIBM_SYSTEM_MANAGER

Server: Receives PTF requests, service requests, and test requests from service requesters.

QSMU/QNSECS QSYSWRK QECS N/A No port is used
TCP/IP Event Monitor

To Start:

STRTCP

To End:

ENDTCP

Product: 5722–SS1

Type: QIBM_TOC_TCPMONITOR

Server: Runs whenever TCP/IP is running and provides an internal mechanism to communicate data and events among TCP/IP services and processes.

QSYS/QTOCTCPIP QSYSWRK QTCPMONITR N/A No port is used
TCP/IP Interface Daemon

To Start:

STRTCP

To End:

ENDTCP

Product: 5722–SS1

Type: QIBM_TOC_QTCPIP

Server: Starts or ends TCP/IP interfaces. When starting a TCP/IP interface, this daemon also attempts to vary on the line, controller, and device used by that TCP/IP interface.

QSYS/QTOCTCPIP QSYSWRK QTCPIP N/A No port is used
TCP/IP L2TP Server

To Start: The L2TP server job starts automatically when the first L2TP connection profile is started using the STRTCPPTP command or iSeries Navigator.

To End: The L2TP server job ends automatically when the last L2TP connection profile is ended using the ENDTCPPTP command or iSeries Navigator.

Product: 5722–SS1

Type: QIBM_TOCPPP_L2TP

Server: Manages Layer Two Tunneling Protocol (L2TP) connections.

QSYS/QTOCPPJOBD QSYSWRK QTPPPL2TP N/A 1701
TCP/IP PPP Server

To Start: The PPP server job starts automatically when the first PPP connection profile is started using the STRTCPPTP command or iSeries Navigator.

To End: The PPP server job ends automatically when the last PPP connection profile is ended using the ENDTCPPTP command or iSeries Navigator.

Product: 5722–SS1

Type: QIBM_TOCPPP_CTL

Server: Manages Point-to-Point Protocol (PPP) connections.

QSYS/QTOCPPJOBD QSYSWRK QTPPPCTL N/A No port is used
TCP/IP SLIP Server

To Start: One SLIP server job is started for each SLIP connection profile that is started using the STRTCPPTP command or iSeries Navigator.

To End: Each SLIP server job is ended when its associated SLIP connection profile is ended using the ENDTCPPTP command or iSeries Navigator.

Product: 5722–SS1

Type: QIBM_TOCSLIP_SSN

Server: Manages Serial Line Internet Protocol (SLIP) connections.

QSYS/QTOCPPJOBD QSYSWRK QTPPDIALxx for SLIP dial connections, where xx is a number. QTPPANSxxx for SLIP answer connections, where xxx is a number. N/A No port is used
TELNET Device Manager

To Start:

STRTCPSVR *TELNET
when QAUTOVRT system value is greater than 0

To End: Not applicable

Product: 5722–TC1

Type: QIBM_TELNET_DEVMGR

Server: Manages device descriptions when clients start and end Telnet sessions. The Telnet Device Manager stores the client's IP address and port in the device description.

QTCP/QTGSTELN QSYSWRK QTVDEVICE *YES No port is used
TELNET Server

To Start:

STRTCPSVR *TELNET
when QAUTOVRT system value is greater than 0

To End:

ENDTCPSVR *TELNET

Product: 5722–TC1

Type: QIBM_TELNET_SERVER

Server: Signs on to an interactive job on the system from another system in a TCP/IP network with a Telnet client.

QTCP/QTGSTELN QSYSWRK QTVTELNET *YES

23 (telnet)
992(telnet-ssl)

Text Search Engine Background Process

To Start: SBMJOB invoked by Update Index Server program DESXCTL

To End: Ends automatically when task is complete. To interrupt abnormally, use ENDJOB.

Product: 5722–DE1 Option 3

Type: QIBM_TEXT_SEARCH_BGPROC

Server: Updates or reorganizes a text search index.

QGPL/QDFTJOBD QSYSWRK IMOSMBCK N/A No port is used
Text Search Engine Daemon

To Start:

CALL PGM(QDB2TX/TXSTART)

To End:

CALL PGM(QDB2TX/TXSTOP)

Product: 5722–DE1 Option 3

Type: QIBM_TEXT_SEARCH_DAEMON

Server: Controls access and processing tasks for indexes belonging to the text search engine instance.

QGPL/QDFTJOBD QSYSWRK IMOSMDEM N/A No port is used
Transfer Function Server TCP/IP

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(QSERVER) PGM(QIWS/QTFPJTCP)

To End: Ends when the subsystem ends

Product: 5722–SS1 Option 12

Type: QIBM_XFER_FUNCTION

Server: Transfers data between the i5/OS operating system and a personal computer.

QGPL/QDFTJOBD QSERVER QTFPJTCP *YES No port is used
Triggered Cache Manager (TCM)

To Start:

STRTCPSVR *TCM

To End:

ENDTCPSVR *TCM

Product: 5722–DG1 Option 1

Type: QIBM_TCMNx (where x is a unique number for each server)

Server: Provides applications with a universal cache interface. TCM can keep multiple caches synchronized with current data.

QTCM/QZHT QSYSWRK User Defined *NO 7049
Trivial FTP

To Start:

STRTCPSVR *TFTP

To End:

ENDTCPSVR *TFTP

Product: 5722–SS1

Type: QIBM_TFTP

Server: Provides basic file transfer functions with no user authentication.

QSYS/QTODTFTP QSYSWRK QTTFT* *NO UDP 69 (tftp)
Virtual Print Server TCP/IP

To Start: 1) Starts when the subsystem starts 2) If subsystem is active and the jobs are not active, issue STRPJ SBS(QSYSWRK) PGM(QIWS/QIWVPPJT)

To End: Ends when the subsystem ends

Product: 5722–SS1 Option 12

Type: QIBM_VRT_PRINT

Server: Prints data from PC application programs on printers connected to the system. You can use a printer that is attached to the host system as though the printer were directly attached to your personal computer.

QGPL/QDFTJOBD QSYSWRK QIWVPPJT *YES No port is used
Virtual Private Networking (VPN) Connection Manager

To Start:

STRTCPSVR *VPN

To End:

ENDTCPSVR *VPN

Product: 5722–SS1

Type: QIBM_VPN

Server: Performs Internet Key Exchange (IKE) protocol processing and manages all VPN connections. VPN allows you to securely extend your private intranet over a public network, such as the Internet.

QSYS/QTOVMAN QSYSWRK QTOVMAN *NO No port is used
VPN Key Manager

To Start:

STRTCPSVR *VPN

To End:

ENDTCPSVR *VPN

Product: 5722–SS1

Type: QIBM_VPN

QSYS/QTOKMAN QSYSWRK QTOKVPNIKE *NO No port is used
WebFacing Server

To Start:

STRTCPSVR *WEBFACING

To End:

ENDTCPSVR *WEBFACING

Product: 5722–SS1

Type: QIBM_WEBFACING

Server: Gives a Web-based application access to application data from interactive programs running on the system.

QSYS/QSYSJOBD QSYSWRK QQFWFSVR *NO 4004 (as-WebFacing)
WebSphere Application Server V4 Advanced Edition, Administration Server

To Start: Either when SBS starts (default Administration server) or explicit command

To End: Through WAS UI

Product: 5733–WA4

Type: QIBM_WSA_ADMIN

Server: Allows a WebSphere user to connect a WebSphere Administrative Console to the system to administer the WebSphere configuration.

QEJBADV4/
QEJBJOBD

QEJBADV4/
QEJBJOBD

QEJBADV4 Configurable (default of QEJBADMIN) N/A

900
9000

WebSphere Application Server V4 Advanced Edition, Application Server

To Start: Through WAS UI or automatic at start of administration server

To End: Through WAS UI

Product: 5733–WA4

Type: QIBM_WSA_EJBSERVER

Server: Allows you to implement and manage server-side Java™ components, enterprise beans, JavaSever Pages, and JSP files.

QEJBADV4/
QEJBJOBD

QEJBADV4/
QEJBJOBD

QEJBADV4 Configurable (default of DEFAULT_SE) N/A 9080
WebSphere Application Server V4 Advanced Single Server Edition, Application Server

To Start: Either when SBS starts (default server) or explicit command

To End: Through WAS UI

Product: 5733–WS4

Type: QIBM_WSA_EJBSERVER

QEJBADV4/
QEJBJOBD

QEJBADV4/
QEJBJOBD

QEJBAES4 Configurable (default of DEFAULT_SE) N/A

900
9000
9080

WebSphere Application Server V5 Express

To Start: Can be started via QShell script or Web ADMIN

To End: Can be ended via QShell script or Web ADMIN

Product: 5722–IWE Option 2

Type: QIBM_WSA_EJBSERVER

QASE5/QASE5 QASE5 Configurable instance name N/A Configurable
WebSphere Application Server V5, Application Server

To Start: Either when SBS starts (default server) or explicit command

To End: Explicit command

Product: 5733–WS5 Option 2

Type: QIBM_WSA_EJBSERVER

QEJBAS5/
QEJBJOBD

QEJBAS5 Configurable (default of SERVER1) N/A

9090
9043
2809
8880
9080
7873
5557
5558
5559
9501
9502
9503

WebSphere Application Server V5 Network Deployment Edition, Application Server

To Start: Through WAS admin interfaces or automatic at start of node agent

To End: Through WAS UI

Product: 5733–WS5 Option 2, 5

Type: QIBM_WSA_EJBSERVER

QEJBAS5/
QEJBJOBD

QEJBAS5 Configurable (default of SERVER1) N/A

9810
8880
9080
7873
9501
9502
9503

WebSphere Application Server V5 Network Deployment Edition, Deployment Manager

To Start: Either when SBS starts (default server) or explicit command

To End: Explicit command

Product: 5733–WS5 Option 5

Type: QIBM_WSA_EJBSERVER

QEJBAS5/
QEJBNDJOBD

QEJBAS5/
QEJBNDJOBD

QEJBASND5 Configurable (default of DMGR) N/A

9090
9043
9809
8879
7989
9401
9402
9403
9100
7277

WebSphere Application Server V5 Network Deployment Edition, Node Agent

To Start: Either when SBS starts (default instance) or explicit command

To End: Through WAS UI or explicit command

Product: 5733–WS5 Option 2, 5

Type: QIBM_WSA_EJBSERVER

QEJBAS5/
QEJBJOBD

QEJBAS5 NODEAGENT N/A Configurable
WebSphere Host On-Demand Service Manager

To Start:

STRTCPSVR *HOD

To End:

ENDTCPSVR *HOD

Product: 5733–A59

Type: QIBM_HOST_ONDEMAND

Configurable (default is QGPL/QDFTJOBD) QSYSWRK QHODSVM *NO 8999
Workload Management Server

To Start: STRWLM (CHGWLMA must be run prior to first start of server)

To End: ENDWLM

Product: 5798–WLD

Type: QIBM_WLM_SERVER

QWLMDE/QWLMDE QSYSWRK QWLMSVR N/A Configurable

 

Parent topic:

Troubleshooting tips

Related concepts
Using Netstat from a character-based interface: Connections Using Netstat from iSeries Navigator: Connections

Related tasks
Job trace Starting a job trace