WAS v8.5 > Develop applications > Develop web services - Security (WS-Security) > Develop applications that use Web Services Security > Develop message-level security for JAX-WS web services > Secure web services applications using the WSS APIs at the message level > Secure messages at the request generator using WSS APIs > Secure messages at the request generator using WSS APIs

Sending self-issued SAML bearer tokens using WSS APIs

We can create self-issued SAML tokens with the bearer subject confirmation method and then send these tokens with Web services request messages using JAX-WS and Web Services Security APIs (WSS API).

This task assumes that you are familiar with JAX-WS, the WSS API interfaces, SAML concepts, and the use of policy sets to configure and administer web services settings. We can build the web services client to use SAML tokens with the bearer subject confirmation method in SOAP request messages using the Web Services Security programming interfaces. Using the programming interfaces in a web services client to specify the use of SAML tokens with bearer subject confirmation is an alternative approach to using policy sets and binding configurations.

We can create a self-issued SAML token and then send the SAML token in web services request messages from a web services client. The web services application client used in this task is a modified version of the client code contained in the JaxWSServicesSamples sample application that is available for download. Code snippets from the sample are described in the procedure section, and a complete, ready-to-use web services client sample is provided in the Example section.

  1. Identify and obtain the web services client to use to invoke a web services provider.

    Use this client to insert SAML tokens in SOAP request messages programmatically using WSS APIs.

    The web services client used in this procedure is a modified version of the client code contained in the JaxWSServicesSamples web services sample application.

    To obtain and modify the sample web services client to add the Web Services Security API to pass SAML tokens in SOAP request messages programmatically using WSS APIs...

    1. Download the JaxWSServicesSamples sample application. The JaxWSServicesSamples sample is not installed by default.
    2. Obtain the JaxWSServicesSamples client code.

      For example purposes, this procedure uses a modified version of the Echo thin client sample that is included in the JaxWSServicesSamples sample. The web services Echo thin client sample file, SampleClient.java, is located in the src\SampleClientSei\src\com\ibm\was\wssample\sei\cli directory. The sample class file is included in the WSSampleClientSei.jar file.

      The JaxWSServicesSamples.ear enterprise application and supporting Java archives (JAR) files are located in the installableApps directory within the JaxWSServicesSamples sample application.

    3. Deploy the JaxWSServicesSamples.ear file onto the application server. After deploying the JaxWSServicesSamples.ear file, you are ready to test the sample web services client code against the sample application.

    Instead of using the web services client sample, we can choose to add the code snippets to pass SAML tokens in SOAP request messages programmatically using WSS APIs in our own web services client application. The example in this procedure uses a JAX-WS Web services thin client; however, we can also use a managed client.

  2. Attach the SAML20 Bearer WSHTTPS default policy set to the web services provider. This policy set is used to protect messages using HTTPS transport. Read about configuring client and provider bindings for the SAML Bearer token for details on how to attach the SAML20 Bearer WSHTTPS default policy set to the Web services provider. The example in this procedure uses self-issued SAML tokens. When you configure the provider bindings, the truststore configuration and certificate must match the signing key of the self-issued token.
  3. Assign the SAML Bearer Provider sample default general bindings to the sample web services provider. Read about configuring client and provider bindings for the SAML bearer token for details on assigning the SAML Bearer Provider sample default general bindings to the web services application.

  4. Create the self-issued SAML token. The following code snippet illustrates creating the SAML token: 
    // Create the SAML token.
HashMap<Object, Object> map = new HashMap<Object, Object>();
map.put(SamlConstants.CONFIRMATION_METHOD, "Bearer");
map.put(SamlConstants.TOKEN_TYPE, WSSConstants.SAML.SAML20_VALUE_TYPE);
map.put(SamlConstants.SAML_NAME_IDENTIFIER, "Alice");
map.put(SamlConstants.SIGNATURE_REQUIRED, "true");   
SAMLGenerateCallbackHandler callbackHandler = new SAMLGenerateCallbackHandler(map);                
SecurityToken samlToken = factory.newSecurityToken(SAMLToken.class, callbackHandler, "system.wss.generate.saml");

System.out.println("SAMLToken id = " + samlToken.getId());

    1. Use the CallService() method to specify the Web services security configuration parameters required to invoke a target Web services provider using a self-issued SAML token.

      The CallService() method sets the configuration parameters required by the Web Services Security runtime environment via the com.ibm.websphere.wssecurity.wssapi.WSSGenerationContext custom property to generate a self-issued SAMLToken.

      Read about configuring a SAML token during token creation for more information about how we can specify configuration properties to control how the token is configured.

    2. Add the Thin Client for JAX-WS JAR file to the class path. Add the app_server_root/runtimes/com.ibm.jaxws.thinclient_8.5.0.jar file to the class path. See the testing web services-enabled clients information for more information about adding this JAR file to the class path.

    3. Use the WSSFactory newSecurityToken method to specify how to create the SAML token.

      Specify the following method to create the SAML token:

        WSSFactory newSecurityToken(SAMLToken.class, callbackHandler, "system.wss.generate.saml")

      Creating a SAML token requires the Java security permission wssapi.SAMLTokenFactory.newSAMLToken. Use the PolicyTool to add the following policy statement to the Java security policy file or the application client was.policy file:

        permission java.security.SecurityPermission "wssapi.SAMLTokenFactory.newSAMLToken

      The SAMLToken.class parameter specifies the type of security token to create.

      The callbackHandler object contains parameters that define the characteristics of the SAMLToken that you are creating. This object points to a SAMLGenerateCallbackHandler object that specifies the configuration parameters described in the following table:

      SAMLGenerateCallbackHandler properties. This table describes the configuration parameters for the SAMLGenerateCallbackHandler object using the bearer subject confirmation method.

      Property Description Required
      SamlConstants.CONFIRMATION_METHOD Specifies to use the Bearer confirmation method. Yes
      SamlConstants.TOKEN_TYPE

      Uses the constant value, WSSConstants.SAML.SAML20_VALUE_TYPE, to specify a SAML 2.0 token type.

      When a web services client has policy set attachments, this property is not used by Web Services Security runtime environment. In this scenario, specify the token value type by the valueType attribute of the tokenGenerator binding configuration.

      The example in this procedure uses a SAML 2.0 token; however, we can also use the WSSConstants.SAML.SAML11_VALUE_TYPE value.

      		Yes
      SamlConstants.SAML_NAME_IDENTIFIER

      User identity such as myname as the NameID value in the SAML token.

      If we do not define this parameter when using the Thin Client for JAX-WS, the NameID value does not contain useful information.

      If we are using a web services managed client, such a Java EE application making a web services request invocation, the Web Services Security runtime environment tries to extract user security information from the security context. Similarly, if we do not define this parameter for a managed web services client, the NameID value contains an UNAUTHENTICATED name identifier.

      This property is not used if the web services client has policy set attachments. Read about sending SAML tokens to learn more about sending the SAML token identity and attributes.

      		No
      SamlConstants.SIGNATURE_REQUIRED

      Whether the issuer is required to digitally sign the SAML token.

      A true value specifies that issuer is required to digitally sign the SAML token. This value is the default.

      		No

      The system.wss.generate.saml parameter specifies the JAAS login module used to create the SAML token. Specify a JVM property to define a JAAS configuration file containing the required JAAS login configuration; for example:

        -Djava.security.auth.login.config=profile_root/properties/wsjaas_client.conf

      Alternatively, we can specify a JAAS login configuration file by setting a Java system property in the sample client code; for example:

        System.setProperty("java.security.auth.login.config", "profile_root/properties/wsjaas_client.conf ");
    4. Obtain the token identifier of the created SAML token.

      Use the following statement as a simple test for the SAML token created:

        System.out.println("SAMLToken id = " + samlToken.getId())

  5. Add the SAML token to the SOAP security header of a Web services request messages.

    1. Initialize the web services client and configure the SOAPAction properties. The following code snippet illustrates these actions: 
      // Initialize web services client EchoService12PortProxy echo = new EchoService12PortProxy();
echo._getDescriptor().setEndpoint(endpointURL);

// Configure SOAPAction properties BindingProvider bp = (BindingProvider) (echo._getDescriptor().getProxy());
Map<String, Object> requestContext = bp.getRequestContext();
requestContext.put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, endpointURL);
requestContext.put(BindingProvider.SOAPACTION_USE_PROPERTY, Boolean.TRUE);
requestContext.put(BindingProvider.SOAPACTION_URI_PROPERTY, "echoOperation");
    2. Initialize the WSSGenerationContext. The following code illustrates the use of the WSSGenerationContext interface to initialize a generation context and enable you to insert the SAMLToken into the web services request message: 
      // Initialize WSSGenerationContext
WSSGenerationContext gencont = factory.newWSSGenerationContext();
gencont.add(samlToken);

      Specifically, the gencont.add(samlToken) method call specifies to put the SAML token into a request message. Use the PolicyTool to add the following policy statement to the Java security policy file or the application client was.policy file:

        “permission javax.security.auth.AuthPermission "modifyPrivateCredentials"

    3. Add the timestamp element in the SOAP messages security header. The SAML20 Bearer WSHTTPS default policy set requires web services requests and response messages to carry a timestamp element in SOAP messages Security header. In the following code snippet, the factory.newWSSTimestamp() method call generates the timestamp, and the gencont.add(timestamp) method call specifies the timestamp to put into a request message: 
      // Add a timestamp to the request message. 
WSSTimestamp timestamp = factory.newWSSTimestamp();
gencont.add(timestamp);
         
gencont.process(requestContext);
    4. Attach WSSGenerationContext object to the web services RequestContext object. The WSSGenerationContext object now contains all the security information required to format a request message. The gencont.process(requestContext) method call attaches the WSSGenerationContext object to the web services RequestContext object to enable the Web Services Security runtime environment to format the required SOAP security header; for example: 
      // Attaches WSSGenerationContext object to the web services RequestContext object. 
gencont.process(requestContext);
    5. Specify SSL transport level message protection using JVM properties.

      The SAML20 Bearer WSHTTPS default policy set requires transport-level message protection using SSL. Specify SSL transport-level message protection using the following JVM property:

        -Dcom.ibm.SSL.ConfigURL=file:profile_root\properties\ssl.client.props

      Alternatively, we can define the SSL configuration file using a Java system property in the sample client code; for example:

        System.setProperty("com.ibm.SSL.ConfigURL", "file:profile_root/properties/ssl.client.props");


Results

You have created a self-issued SAML token with the bearer subject confirmation method and then sent this token with web services request messages using JAX-WS and WSS APIs.


Example

The following code sample is a web services client application that demonstrates how to create a self-issued SAML token and send that SAML token in web services request messages. If your usage scenario requires SAML tokens, but does not require the application to pass the SAML tokens using web services messages, you only need to use the first part of the following sample code, up through the // Initialize web services client section. 

/**
 * The following source code is sample code created by IBM Corporation.
 * This sample code is provided to you solely for the purpose of assisting you in the  * use of the technology.  The code is provided 'AS IS', without warranty or condition of  * any kind.  IBM shall not be liable for any damages arising out of your use of the  * sample code, even if IBM has been advised of the possibility of such damages.
 */

package com.ibm.was.wssample.sei.cli;

import com.ibm.was.wssample.sei.echo.EchoService12PortProxy;
import com.ibm.was.wssample.sei.echo.EchoStringInput;

import com.ibm.websphere.wssecurity.wssapi.WSSFactory;
import com.ibm.websphere.wssecurity.wssapi.WSSGenerationContext;
import com.ibm.websphere.wssecurity.wssapi.WSSConsumingContext;
import com.ibm.websphere.wssecurity.wssapi.WSSTimestamp;
import com.ibm.websphere.wssecurity.callbackhandler.SAMLGenerateCallbackHandler;
import com.ibm.websphere.wssecurity.wssapi.token.SAMLToken;
import com.ibm.websphere.wssecurity.wssapi.token.SecurityToken;
import com.ibm.wsspi.wssecurity.core.token.config.WSSConstants;
import com.ibm.wsspi.wssecurity.saml.config.SamlConstants;

import java.util.Map;
import java.util.HashMap;

import javax.xml.ws.BindingProvider;

/**
 * SampleClient
 * main entry point for thin client JAR sample
 * and worker class to communicate with the services  */
public class SampleClient {

  private String urlHost = "localhost";
  private String urlPort = "9443";
  private static final String CONTEXT_BASE = "/WSSampleSei/";
  private static final String ECHO_CONTEXT12 = CONTEXT_BASE+"EchoService12";
  private String message = "HELLO";
  private String uriString = "https://" + urlHost + ":" + urlPort;
  private String endpointURL = uriString + ECHO_CONTEXT12;
  private String input = message;

  /**
   * main()
   * 
   * see printusage() for command-line arguments
   * 
   * @param args
   */
  public static void main(String[] args) {
    SampleClient sample = new SampleClient();
    sample.CallService();
  }

  /**
   * CallService Parms were already read. Now call the service proxy classes    * 
   */
  void CallService() {
    String response = "ERROR!:";
    try {
      System.setProperty("java.security.auth.login.config", "profile_root/properties/wsjaas_client.conf ");
      System.setProperty("com.ibm.SSL.ConfigURL", "file:profile_root/properties/ssl.client.props");

      // Initialize WSSFactory object       WSSFactory factory = WSSFactory.getInstance();
      // Initialize WSSGenerationContext
      WSSGenerationContext gencont = factory.newWSSGenerationContext();
      // Initialize SAML issuer configuration via custom properties       HashMap<Object, Object> customProps = new HashMap<Object,Object>();

      customProps.put(SamlConstants.ISSUER_URI_PROP, "example.com");
      customProps.put(SamlConstants.TTL_PROP, "3600000");
      customProps.put(SamlConstants.KS_PATH_PROP, "keystores/saml-provider.jceks");
      customProps.put(SamlConstants.KS_TYPE_PROP, "JCEKS");
      customProps.put(SamlConstants.KS_PW_PROP, "{xor}LCswLTovPiws");
      customProps.put(SamlConstants.KEY_ALIAS_PROP, "samlissuer");
      customProps.put(SamlConstants.KEY_NAME_PROP, "CN=SAMLIssuer, O=EXAMPLE");
      customProps.put(SamlConstants.KEY_PW_PROP, "{xor}NDomLz4sLA==");
      customProps.put(SamlConstants.TS_PATH_PROP, "keystores/saml-provider.jceks");
      customProps.put(SamlConstants.TS_TYPE_PROP, "JCEKS");
      customProps.put(SamlConstants.TS_PW_PROP, "{xor}LCswLTovPiws");
      gencont.add(customProps); //Add custom properties 
      // Create SAMLToken
      HashMap<Object, Object> map = new HashMap<Object, Object>();
      map.put(SamlConstants.CONFIRMATION_METHOD, "Bearer");
      map.put(SamlConstants.TOKEN_TYPE, WSSConstants.SAML.SAML20_VALUE_TYPE);
      map.put(SamlConstants.SAML_NAME_IDENTIFIER, "Alice");
      map.put(SamlConstants.SIGNATURE_REQUIRED, "true");
      SAMLGenerateCallbackHandler callbackHandler = new SAMLGenerateCallbackHandler(map);

      SecurityToken samlToken = factory.newSecurityToken(SAMLToken.class, callbackHandler, "system.wss.generate.saml");

      System.out.println("SAMLToken id = " + samlToken.getId());

      // Initialize web services client       EchoService12PortProxy echo = new EchoService12PortProxy();
      echo._getDescriptor().setEndpoint(endpointURL);

      // Configure SOAPAction properties       BindingProvider bp = (BindingProvider) (echo._getDescriptor().getProxy());
      Map<String, Object> requestContext = bp.getRequestContext();
      requestContext.put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, endpointURL);
      requestContext.put(BindingProvider.SOAPACTION_USE_PROPERTY, Boolean.TRUE);
      requestContext.put(BindingProvider.SOAPACTION_URI_PROPERTY, "echoOperation");

      gencont.add(samlToken);

      // Add timestamp
      WSSTimestamp timestamp = factory.newWSSTimestamp();
      gencont.add(timestamp);

      gencont.process(requestContext);

      // Build the input object       EchoStringInput echoParm = 
        new com.ibm.was.wssample.sei.echo.ObjectFactory().createEchoStringInput();
      echoParm.setEchoInput(input);
      System.out.println(">> CLIENT: SEI Echo to " + endpointURL);

      // Prepare to consume timestamp in response message.
      WSSConsumingContext concont = factory.newWSSConsumingContext();
      concont.add(WSSConsumingContext.TIMESTAMP); 
      concont.process(requestContext);

      // Call the service       response = echo.echoOperation(echoParm).getEchoResponse();

      System.out.println(">> CLIENT: SEI Echo invocation complete.");
      System.out.println(">> CLIENT: SEI Echo response is: " + response);
    } catch (Exception e) {
      System.out.println(">> CLIENT: ERROR: SEI Echo EXCEPTION.");
      e.printStackTrace();
    }
  }}

When this web services client application sample runs correctly, you receive messages like the following messages: 

SAMLToken id = _191EBC44865015D9AB1270745072344
Retrieving document at 'file:profile_root/.../wsdl/'.
>> CLIENT: SEI Echo to https://localhost:9443/WSSampleSei/EchoService12
>> CLIENT: SEI Echo invocation complete.
>> CLIENT: SEI Echo response is: SOAP12==>>HELLO


Related concepts:

Access the samples
SAML concepts


Related


Secure JAX-WS web services using message-level security
SAML sender-vouches token
SAML bearer token
Testing web services-enabled clients
Use PolicyTool to edit policy files for Java 2 security
Samples documentation


Reference:

SAMLIssuerConfig.properties file
Web Services Security APIs


+

Search Tips   |   Advanced Search