WAS v8.5 > Develop applications > Develop SCA composites > Specify bindings in an SCA environment

Configure the SCA web service binding

We can expose a SCA application as a web service by configuring an SCA web service binding.

The web service binding enables SCA applications to expose services as web services to external clients and gives SCA components access to external web services. External clients that access SCA services exposed as web services might or might not be implemented as an SCA component. We can use the web service binding element <binding.ws> within either a component service or a component reference definition. When this binding is used with a component service, the web service binding enables clients to access a service that is offered by a particular component as a web service. If the web service binding is used with a component reference, components in an SCA composite can consume an external web service and access it like any other SCA component.

WAS v8.5 supports Web Services Description Language (WSDL) v1.1 definitions that also conform to the WS-I Basic Profile v1.1 and Simple SOAP Binding Profile 1.0 standards, and use the document literal style. For OASIS-level applications only, the rpc-literalstyle is also supported as long as it conforms to the above WS-I profiles. All these conditions are required for support.

An SCA web service binding is a WSDL-based binding; meaning the binding either references an existing WSDL document or enables you to specify enough information to generate a WSDL document.

We can typically use the same policy set functionality, that we use for defining qualities of service on Java EE-based web services that are running in the application server, to define quality of service definitions on SCA clients and services that use the SCA web service binding. When the instructions for administratively configuring these policy set definitions are different for SCA-based web services than they are for Java EE-based web services, then special topics and instructions are provided in this information center. If there are no special instructions for SCA, configure the corresponding quality of service on the SCA-based web service the same way that you would configure that quality of service for a Java EE-based web service.

An SCA web service binding provides support for providing and consuming services using the SOAP v1.1 over HTTP and SOAP V1.2 over HTTP protocols.

WAS v8.5 does not support the following functions:

Use an SCA web service binding without implementing JAX-WS handlers. Do not use SwA binary message optimizations or MTOM optimizations for transferring binary data between SCA clients and services that use the SCA web services binding. Instead of implementing MTOM or SwA binary message optimizations to send binary data, use the base64Binary XML Schema Definition (XSD) encoding to embed the data within the SOAP message.

  1. Configure an SCA service with an SCA web service binding.

    Depending on whether you develop your SCA service using the top-down approach starting with an existing WSDL file or you develop your SCA service using the bottom-up approach starting with existing Java code, you might or might not have a WSDL file available. Also, the WSDL file might define only a portType or it might include a port definition as well.

    • For SCA applications developed top-down starting from a WSDL port, you must refer to the port definition in the existing WSDL file by adding a <binding.ws> element as a child of your <service> element. An example of the syntax for this step follows:

        <binding.ws wsdlElement=”<port target Namespace>#wsdl.port(<service name attr>/<port name attr>)”/>

      The location attribute of the <address> element for the port is ignored by the runtime environment when determining the URL at which your service is invoked.

      The following WSDL file and composite definition illustrate this scenario:

      WSDL file 

      <wsdl:definitions targetNamespace="http://www.ibm.com/" xmlns:tns="http://www.ibm.com/" …>       ….
     <wsdl:portType name="MyPortType ">       ….
     <wsdl:binding name="MyBinding" type="tns:MyPortType">       ….
     <wsdl:service name="MyService">          <wsdl:port binding="tns:MyBinding" name="MyPort">              <wsdlsoap:address location=""/>          </wsdl:port>      </wsdl:service>

      Composite definition 

      <composite…>      <component name="MyComponent">        <implementation.java class="test.MyCompImpl"/>          <service name="GuessAndGreetWrapped">              <interface.wsdl interface="http://www.ibm.com/#wsdl.interface(MyPortType)" />              <binding.ws wsdlElement="http:// www.ibm.com/#wsdl.port(MyService/MyPort)" />          </service>      </component>       …
</composite>

    • For SCA applications developed top-down starting from a WSDL portType, create an empty <binding.ws> element as the child of your <service> element. The empty <binding.ws> element directs the runtime environment to generate a port that corresponds to your WSDL portType definition. The generated port uses a SOAP 1.1 over HTTP WSDL binding.

      The following WSDL file and composite definition illustrate this scenario:

      WSDL file 

      <wsdl:definitions targetNamespace="http://www.ibm.com/" xmlns:tns="http://www.ibm.com/" …>       ….
     <wsdl:portType name="MyPortType ">

      Composite definition 

      <composite…>      <component name="MyComponent">        <implementation.java class="test.MyCompImpl"/>          <service name="GuessAndGreetWrapped">              <interface.wsdl interface="http://www.ibm.com/#wsdl.interface(MyPortType)" />              <binding.ws/>
         </service>      </component>       …
</composite>

    • For SCA applications developed bottom-up starting from existing Java code, create an empty <binding.ws> element as the child of your <service> element. The empty <binding.ws> element directs the runtime environment to generate a WSDL portType that corresponds to your Java interface, and a port with a SOAP 1.1 over HTTP WSDL binding.

      The following example demonstrates the <binding.ws> element for this scenario: 

      <composite…>      <component name="MyComponent">        <implementation.java class="test.MyCompImpl"/>          <service name="GuessAndGreetWrapped">              <binding.ws/>          </service>      </component>       …
</composite>

  2. Determine the endpoint URL and test the endpoint of deployed SCA service.

    After you configure the SCA service with a web service binding, we can test the endpoint for the deployed SCA service. Accessing the endpoint with a web browser displays the Axis2 cover page.

    The endpoint URL is determined based on one of the following scenarios:

    • If there is no uri attribute on the binding, the component resembles:

        <component name="C1"> <service name="S1"> <binding.ws/>

      Then the endpoint is:

        http://<host>:port/C1_name/S1_name

    • If the uri attribute on the binding is relative, the component resembles:

        <component name="C1"> <service name="S1"> <inding.ws name="B1" uri="U1"/>

      Then the endpoint is:

        http://<host>:port/C1/U1

    • If the uri attribute on the binding is absolute, which applies to OASIS only and not to OSOA, the component resembles:

        <component name="C1"> <service name="S1"> <inding.ws name="B1" uri="/U1"/>

      Then the endpoint is:

        http://<host>:port/U1

    For SCA services configured using wsdlElement#wsdl.service, the ports are appended; for example:

      http://<host>:port/Component_name/Service_name/Port_name

    For OASIS, wsdl.service is not supported.

  3. View WSDL or XSD documents for the SCA service with the web service binding.

    Append the query string ?wsdl to the endpoint URL. Accessing the URL with a web browser returns the outermost WSDL. We can then view included and imported documents using relative URLs.

  4. Configure an SCA reference (client) with an SCA web service binding.

    1. Configure the reference with an <interface.wsdl> element that refers to the portType of the target service. Read about developing SCA service clients to learn how to configure the reference with an <interface.wsdl>.
    2. Resolve the SCA reference to an actual endpoint of a deployed web service using one of the mechanisms provided by the SCA web service binding support.

      • When the target web service is deployed as an SCA component service in the same domain as the client component, we can resolve the reference to the target component using the @target attribute of the <reference> element for OSOA composites or the <binding.ws> element for OASIS composites. Using the @target attribute eliminates the need to know the specific URL of the deployed target service.

        For example, assume the target service is defined as follows:

          <component name="TargetComponent"> <implementation.java …/> <service name="MyService"> <interface.wsdl … /> <binding.ws … /> </service> </component>

        A reference in an OSOA composite can be wired to this service as follows: 

        <component name="ClientComponent">   <implementation.java …/> 
    <!-- Resolution uses @target attribute on reference element. -->     <reference name="myRef" target=”TargetComponent/MyService”>        <interface.wsdl … /> 
       <!-- The binding does not need endpoint-related info added. -->  
       <binding.ws/>     </reference> </component>

        A reference in an OASIS composite can be wired to this service as follows: 

        <component name="ClientComponent">   <implementation.java …/> 
    <reference name="myRef">        <interface.wsdl … /> 
       <!-- Resolution done using the @target attribute on binding element. -->        <binding.ws target=”TargetComponent/MyService”/>     </reference> </component>
        In these examples, the binding.ws element does not specify a wsdlElement attribute. The SCA run time creates a SOAP binding, WSDL service, and WSDL port on each side. If your service binding specifies a SOAP binding, either directly or indirectly using the WSDL port, your reference binding must specify a compatible SOAP binding.

      • If the target web service is not an SCA service in the same domain as the client, use a binding-specific endpoint resolution mechanism. We can also resolve a reference to an SCA service in the same domain using the binding-specific mechanisms, instead of using the @target annotation.

        1. We can define the endpoint for a deployed web service in an existing WSDL file using <wsdlsoap:address>. For example: 
          <wsdl:definitions targetNamespace=”http://my.work/test/”
        xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" … >     ...
    <wsdl:portType name="MyPortType">     ...
    <wsdl:binding name="MyBinding" type="tns:MyPortType">     ...
    <wsdl:service name="MyService">       <wsdl:port name="MyPort" binding="tns:MyBinding">         <wsdlsoap:address
           location="http://www.mywork.com:9080/TargetComponent/MyService "/>      </wsdl:port>    </wsdl:service> </wsdl:definitions>

          The client points to the WSDL port using a @wsdlElement attribute on the <binding.ws> element using the following syntax:

            <port target Namespace>#wsdl.port(service_name_attribute/port_name_attribute)"/>

          For example: 

          <component name="ClientComponent">   <implementation.java …/>     <reference name="myRef">        <interface.wsdl … />        <binding.ws wsdlElement="http://my.work/test/#wsdl.port(MyService/MyPort)”/> 
    </reference> </component>

        2. If the endpoint is not present in the WSDL for the service, there are several ways to specify the endpoint using the reference. In the following WSDL file, the endpoint (wsdlsoap:address) is not specified. 
          <wsdl:definitions targetNamespace=”http://my.work/test/”
        xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
    xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/"   … >   ...
  <wsdl:portType name="MyPortType">   ...
  <wsdl:binding name="MyBinding" type="tns:MyPortType">   ...
    <wsdl:service name="MyService">       <wsdl:port name="MyPort" binding="tns:MyBinding">       ...
        <!-- In this case, the endpoint is not specified. -->         <wsdlsoap:address location=""/>      </wsdl:port>    </wsdl:service> </wsdl:definitions>

          For OSOA, we can add the endpoint to the composite definition. Add the @uri attribute to the <binding.ws> element to specify the endpoint. For example: 

          <!-- An OSOA example composite definition. --> <component name="ClientComponent">   <implementation.java …/>     <reference name="myRef">          <interface.wsdl … />          <binding.ws wsdlElement="http://my.work/test/#wsdl.port(MyService/MyPort)”
            uri=”http://www.mywork.com:9080/TargetComponent/MyService” />     </reference> </component>

          For OASIS based references, one approach is to add a WSDL binding to the reference. Then add @uri to the component <binding.ws> element. 

          <!-- An OASIS example composite definition. --> <component name="ClientComponent">   <implementation.java …/>     <reference name="myRef">          <interface.wsdl interface="http://my.work/test/#wsdl.interface(MyPortType)"/>          <binding.ws uri=”http://www.mywork.com:9080/TargetComponent/MyService” 
                     wsdlElement="http://my.work/test/#wsdl.binding(MyBinding)” />     </reference> </component>

  5. Optional: If your service or reference interface is bidirectional such that a callback is defined, you must also configure the web service binding on the callback.

    • Configure callback for the SCA web services binding using the WSDL port.

      Configuring callback for the SCA web services binding is similar to configuring an SCA service with the SCA web services binding; however, you add a second service, the callback. When you configure an SCA service with the SCA web services binding, you define a WSDL port, either explicitly by pointing directly to a WSDL port definition, or implicitly by giving the runtime enough information to calculate a WSDL port. Similarly, you must also define a WSDL port for the callback. A difference for the callback is the runtime environment defines the WSDL port used for the callback because the runtime environment must keep this port tightly coupled to the forward call. Therefore, the most we can do when developing your SCA application using the top-down approach and defining a callback for this service, is to point to a WSDL binding. For example: 

      <!-- Configuring a service with callback with web service binding -->  <component name="HelloWorldServiceComponent">    <implementation.java class="…" />    <service name="HelloWorldService">      <interface.wsdl interface=”http://www.ibm.com/sca/#wsdl.interface(HelloWorld)”
                     callbackInterface=” http://www.ibm.com/sca/#wsdl.interface(HelloWorldCallback)”/>      <binding.ws wsdlElement="http://www.ibm.com/sca/#wsdl.port(HelloWorldService/HelloWorldSoapPort)"/>        <callback>          <binding.ws wsdlElement="http://www.ibm.com/sca/#wsdl.binding(HelloWorldCallbackSoapBinding)"/>        </callback>     </service>  </component>

      The following example shows a configuration of a client component with reference to this service with callback defined. The reference and service configuration each share the same view of which direction is the forward direction and which is the callback direction. 

      <!-- Configuring a reference with callback with web service binding. -->  <component name="HelloWorldClientComponent">    <implementation.java class="…" />    <reference name="helloWorldRef">      <interface.wsdl interface=”http://www.ibm.com/sca/#wsdl.interface(HelloWorld)”
                     callbackInterface=” http://www.ibm.com/sca/#wsdl.interface(HelloWorldCallback)”/>      <binding.ws wsdlElement="http://www.ibm.com/sca/#wsdl.port(HelloWorldService/HelloWorldSoapPort)"/>        <callback> 
         <binding.ws wsdlElement="http://www.ibm.com/sca/#wsdl.binding(HelloWorldCallbackSoapBinding)" />        </callback>    </reference>  </component>

    • Configure callback for the SCA web service binding using the WSDL portType.

      Similar to the scenario of configuring a service with a web service binding when starting with a WSDL port, you also configure an empty <binding.ws> element to configure callback using the WSDL portType. The following composite definition example illustrates the scenario when starting with two WSDL portType definitions that has such that one interface uses a forward direction and the other interface uses callback: 

      <!-- Configuring a service with callback with web service binding -->  <component name="HelloWorldServiceComponent">    <implementation.java class="…" />    <service name="HelloWorldService">      <interface.wsdl interface=”http://www.ibm.com/sca/#wsdl.interface(HelloWorld)”
                     callbackInterface=” http://www.ibm.com/sca/#wsdl.interface(HelloWorldCallback)”/>      <binding.ws/>         <callback>            <binding.ws/>         </callback>    </service>  </component>
      <!-- Configuring a reference with callback with web service binding -->  <component name="HelloWorldClientComponent">    <implementation.java class="…" />    <reference name="helloWorldRef">      <interface.wsdl interface=”http://www.ibm.com/sca/#wsdl.interface(HelloWorld)”
                     callbackInterface=” http://www.ibm.com/sca/#wsdl.interface(HelloWorldCallback)”/> 
     <binding.ws/>        <callback>          <binding.ws/> 
       </callback> 
    </reference>  </component>

    • Configure callback for the SCA web service binding using the Java interface.

      For the bottom-up case starting with a Java interface, the composite definition is identical to the WSDL port and portType scenarios, except that you must replace the <interface.wsdl> elements with the <interface.java> element. For example: 

      <interface.java interface="helloworld.HelloWorldService"
         callbackInterface="helloworld.HelloWorldCallback"/>
    • (Optional: OASIS only) Configure your service to use SOAP 1.1 or 1.2.

      We can configure your SCA web service to require a particular SOAP version by providing an intent. For example:

        <binding.ws requires="sca:SOAP.v1_2"/>

      Supported intents are sca:SOAP.v1_1 and sca:SOAP.v1_2.


Results

You have a configured SCA web service binding service or reference.

There are additional ways for the web service binding to generate a WSDL port that are not described in this topic. These additional methods rely on WSDL generation at run time. This can cause problems if the generated WSDL does not match the original WSDL obtained from a service provider.

We can avoid problems by ensuring that client package references the original WSDL obtained from a web service provider. If we use the shortcut of omitting a client-side reference to the WSDL, be sure to do so only in the case when we are sure the WSDL port generated for the client is identical to the WSDL port of the deployed service because the service port is generated using the same algorithm.

For an example not problematic, suppose you write a service using the bottom-up style, starting from a Java interface, and deploy the service with a <binding.ws> element with no attributes. This directs the runtime environment to generate the WSDL port for this service. Also suppose an SCA client is developed with access to the original Java classes used to write the service implementation. This SCA client is used to test the SCA service using a client-side reference with web service binding. We can configure this reference without any knowledge of the service WSDL. In this case, the reference interface is the original Java interface of the service, and we can resolve the reference using the <reference> @target mechanism. See the resolving SCA references documentation for more information about using the @target attribute to resolve an SCA reference. Using this approach, there is no WSDL to obtain or refer to in constructing the client. This works because the product runtime environment maps the service-side Java to WSDL in an identical manner as it maps the client-side Java to WSDL.

In contrast, the following scenario is problematic. Suppose that you write an SCA client with a web service binding reference to a web service that is hosted on a platform other than the product. It might seem reasonable to generate your Java client from the service provider, and then ignore the WSDL from that point on, avoiding the additional syntax in your client-side composite definition. To do this, we use the <binding.ws> element @uri attribute to specify the endpoint URL where the service is hosted. This scenario is problematic because it forces the runtime environment to generate a WSDL port for the client which might result in subtle mismatches between the WSDL generated for the client side and the actual WSDL port description of the deployed web service.

Deploy your composite that has the SCA web services binding service or reference.

If the composite uses a bidirectional interface as an SCA service interface and a NullPointerException results when we add your SCA module or application to a business-level application (for example, using the wsadmin AdminTask.addCompUnit command), we might need to add the SCA @Callback annotation to the forward Java interface.

A NullPointerException can occur whether you are using a top-down development style (starting from WSDL or XSD) or a bottom-up style (starting from Java). With the top-downstyle, a composite definition typically includes a bidirectional interface definition such as the following: 

<interface.wsdl interface="http://forward.my/intf#wsdl.interface(ForwardIntf)"
    callbackInterface="http://callback.my/intf#wsdl.interface(CallbackIntf)"/>

With the bottom-up style, a composite definition typically includes a bidirectional interface definition such as the following: 

<interface.java interface="my.forward.intf.ForwardIntf"
    callbackInterface="my.callback.intf.CallbackIntf"/>

The NullPointerException can occur if the forward Java interface is not annotated with @Callback, or more specifically @org.osoa.sca.annotations.Callback. In the top-down example, the forward Java interface is the class generated from portType, http://forward.my/intf/ForwardIntf using the wsimport tool or my.forward.intf.ForwardIntf if the default options are used. In the bottom-up example, the forward Java interface is the class my.forward.intf.ForwardIntf.

To fix the NullPointerException problem, add the @Callback annotation to the forward Java interface and recompile. The @Callback annotation is a class-level annotation with a single argument, the callback interface Class object; for example: 

...
import org.osoa.sca.annotations.Callback
@Callback(my.callback.intf.CallbackIntf.class) 
public interface ForwardIntf  {
...

If we are using the recommended top-down developmentstyle, the forward Java interface is a generated class. It is generated from the WSDL portType using the wsimport tool. Use the -s or -keep option so that wsimport generates the Java source files, and then add the @Callback annotation manually to the generated class and recompile.


Subtopics


Related concepts:

Web services policy sets
SCA components
SCA composites
SCA domain


Related


Configure web service binding custom endpoints to support a proxy server
Configure the SCA web service binding to transport SOAP messages over JMS
Specify bindings in an SCA environment
Resolve SCA references
Develop SCA services with existing Java code
Manage policies in a policy set
Deploy business-level applications
Develop SCA service clients
Manage policy sets
Export WSDL and XSD documents using scripting
wsimport command for JAX-WS applications


Reference:

Service Component Architecture specifications and APIs


+

Search Tips   |   Advanced Search