WAS v8.5 > Reference > Commands (wsadmin scripting)

NodeGroupCommands command group for AdminTask using wsadmin.sh

We can use the Jython or Jacl scripting languages to manage servers with wsadmin. The commands and parameters in the NodeGroupCommands group can be used to create and manage node groups and node group members.

The NodeGroupCommands command group for AdminTask includes the following commands:

• addNodeGroupMember
• createNodeGroup
• createNodeGroupProperty
• listNodeGroupProperties
• listNodeGroups
• listNodes
• modifyNodeGroup
• modifyNodeGroupProperty
• removeNodeGroup
• removeNodeGroupMember
• removeNodeGroupProperty

addNodeGroupMember

The addNodeGroupMember command adds a member to a node group. Nodes can be members of more than one node group. The command does validity checking to ensure the following:

• Distributed and z/OS nodes are not combined in the same node group.

Target object The target object is the node group where the member will be created. This target object is required.

Parameters and return values

-nodeName

The name of the node to add to a node group. This parameter is required.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask addNodeGroupMember WBINodeGroup {-nodeName WBINode}

• Jython string:

  AdminTask.addNodeGroupMember('WBINodeGroup', '[-nodeName WBINode]')

• Jython list:

  AdminTask.addNodeGroupMember('WBINodeGroup', ['-nodeName', 'WBINode'])

Interactive mode example usage:

• Jacl:

  $AdminTask addNodeGroupMember {-interactive}

• Jython string:

  AdminTask.addNodeGroupMember ('[-interactive]')

• Jython list:

  AdminTask.addNodeGroupMember (['-interactive'])

createNodeGroup

The createNodeGroup command creates a new node group. A node group consists of a group of nodes that are referred to as node group members. Optionally, we can create a short name and a description for the new node group.

Target object

The node group name to be created. This target object is required.

Parameters and return values

-shortName

The short name of the node group. This parameter is optional.

-description

The description of the node group. This parameter is optional.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask createNodeGroup WBINodeGroup

• Jython string:

  AdminTask.createNodeGroup('WBINodeGroup')

• Jython list:

  AdminTask.createNodeGroup('WBINodeGroup')

Interactive mode example usage:

• Jacl:

  $AdminTask createNodeGroup {-interactive}

• Jython string:

  AdminTask.createNodeGroup ('[-interactive]')

• Jython list:

  AdminTask.createNodeGroup (['-interactive'])

createNodeGroupProperty

The createNodeGroupProperty command creates custom properties for a node group.

Target object The name of the node group. This target object is required.

Parameters and return values

-name

The name of the custom property to create. This parameter is required.

-value

The value of the custom property. This parameter is optional.

-description

The description of the custom property. This parameter is optional.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask createNodeGroupProperty WBINodeGroup {-name Channel -value "channel1"}

• Jython string:

  AdminTask.createNodeGroupProperty('WBINodeGroup', '[-name Channel -value channel1]')

• Jython list:

  AdminTask.createNodeGroupProperty('WBINodeGroup', ['-name', 'Channel', '-value', 'channel1'])

Interactive mode example usage:

• Jacl:

  $AdminTask createNodeGroupProperty {-interactive}

• Jython string:

  AdminTask.createNodeGroupProperty ('[-interactive]')

• Jython list:

  AdminTask.createNodeGroupProperty (['-interactive'])

listNodeGroupProperties

The listNodeGroupProperties command displays all of the custom properties of a node group.

Target object The target object is name of the node group. This target object is required.

Parameters and return values

• Parameters: None

• Returns: A list of all of the custom properties of a node group.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask listNodeGroupProperties WBINodeGroup

• Jython string:

  AdminTask.listNodeGroupProperties('WBINodeGroup')

• Jython list:

  AdminTask.listNodeGroupProperties('WBINodeGroup')

Interactive mode example usage:

• Jacl:

  $AdminTask listNodeGroupProperties {-interactive}

• Jython string:

  AdminTask.listNodeGroupProperties ('[-interactive]')

• Jython list:

  AdminTask.listNodeGroupProperties (['-interactive'])

listNodeGroups

The listNodeGroups command returns the list of node groups from the configuration repository. We can pass an optional node name to the command that returns the list of node groups where the node resides.

Target object The target object is name of the node. This target object is optional.

Parameters and return values

• Parameters: None

• Returns: A list of the node groups in the cell.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask listNodeGroups $AdminTask listNodeGroups nodeName

• Jython string:

  AdminTask.listNodeGroups AdminTask.listNodeGroups('nodeName')

• Jython list:

  AdminTask.listNodeGroups AdminTask.listNodeGroups('nodeName')

Interactive mode example usage:

• Jacl:

  $AdminTask listNodeGroups {-interactive}

• Jython string:

  AdminTask.listNodeGroups ('[-interactive]')

• Jython list:

  AdminTask.listNodeGroups (['-interactive'])

listNodes

The listNodes command displays all of the nodes in the cell or on a given node group.

Target object None

Parameters and return values

• Parameters:

  - nodeGroup

  The name of the node group. This parameter is optional.

• Returns: A list of all the nodes in the cell or on a given node group.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask listNodes {-nodeGroup node_group_name}

• Jython string:

  AdminTask.listNodes('[-nodeGroup node_group_name]')

• Jython list:

  AdminTask.listNodes(['-nodeGroup', 'node_group_name' 'node', 'group'])

Interactive mode example usage:

• Jacl:

  $AdminTask listNodes {-interactive}

• Jython string:

  AdminTask.listNodes ('[-interactive]')

• Jython list:

  AdminTask.listNodes (['-interactive'])

modifyNodeGroup

The modifyNodeGroup command modifies the configuration of a node group. The node group name cannot be changed. However, its short name and description are supported. Also, its node membership can be modified.

Target object The target object is the node group name. This target object is required.

Parameters and return values

-shortName

The short name of the node group. This parameter is optional.

-description

The description of the node group. This parameter is optional.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask modifyNodeGroup WBINodeGroup {-shortName WBIGroup -description "Default node group"}

• Jython string:

  AdminTask.modifyNodeGroup WBINodeGroup ('[-shortName WBIGroup -description "WBI" node group]')

• Jython list:

  AdminTask.modifyNodeGroup WBINodeGroup (['-shortName', 'WBIGroup', '-description', "WBI",
   'node', 'group'])

Interactive mode example usage:

• Jacl:

  $AdminTask modifyNodeGroup {-interactive}

• Jython string:

  AdminTask.modifyNodeGroup ('[-interactive]')

• Jython list:

  AdminTask.modifyNodeGroup (['-interactive'])

modifyNodeGroupProperty

The modifyNodeGroupProperty command modifies custom properties for a node group

Target object The name of the node group. This target object is required.

Parameters and return values

-name

The name of the custom property to modify. This parameter is required.

-value

The value of the custom property. This parameter is optional.

-description

The description of the custom property. This parameter is optional.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask modifyNodeGroupProperty WBINodeGroup {-name Channel -value "channel1"}

• Jython string:

  AdminTask.modifyNodeGroupProperty('WBINodeGroup', '[-name Channel -value channel1]')

• Jython list:

  AdminTask.modifyNodeGroupProperty('WBINodeGroup', ['-name', 'Channel', '-value', 'channel1'])

Interactive mode example usage:

• Jacl:

  $AdminTask modifyNodeGroupProperty {-interactive}

• Jython string:

  AdminTask.modifyNodeGroupProperty ('[-interactive]')

• Jython list:

  AdminTask.modifyNodeGroupProperty (['-interactive'])

removeNodeGroup

The removeNodeGroup command removes the configuration of a node group. We can remove a node group if it does not contain any members. Also, the default node group cannot be removed.

Target object The name of the node group to be removed. This target object is required.

Parameters and return values

• Parameters: None

• Returns: The node group object ID.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask removeNodeGroup WBINodeGroup

• Jython string:

  AdminTask.removeNodeGroup('WBINodeGroup')

• Jython list:

  AdminTask.removeNodeGroup('WBINodeGroup')

Interactive mode example usage:

• Jacl:

  $AdminTask removeNodeGroup {-interactive}

• Jython string:

  AdminTask.removeNodeGroup ('[-interactive]')

• Jython list:

  AdminTask.removeNodeGroup (['-interactive'])

removeNodeGroupMember

The removeNodeGroupMember command removes the configuration of a node group member.

• A node must always be a member of at least one node group.
• We cannot remove a node from a node group that is part of a cluster in that node group.

Target object The target object is the node group containing the member to be removed. This target object is required.

Parameters and return values

-nodeName

The name of the node to remove from a node group. This parameter is required.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask removeNodeGroupMember WBINodeGroup {-nodeName WBINode}

• Jython string:

  AdminTask.removeNodeGroupMember('WBINodeGroup', '[-nodeName WBINode]')

• Jython list:

  AdminTask.removeNodeGroupMember('WBINodeGroup', ['-nodeName', 'WBINode'])

Interactive mode example usage:

• Jacl:

  $AdminTask removeNodeGroupMember {-interactive}

• Jython string:

  AdminTask.removeNodeGroupMember ('[-interactive]')

• Jython list:

  AdminTask.removeNodeGroupMember (['-interactive'])

removeNodeGroupProperty

The removeNodeGroupProperty command removes custom properties of a node group.

Target object The name of the node group. This target object is required.

Parameters and return values

-name

The name of the custom property to remove. This parameter is required.

Examples

Batch mode example usage:

• Jacl:

  $AdminTask removeNodeGroupProperty WBINodeGroup {-name Channel}

• Jython string:

  AdminTask.removeNodeGroupProperty('WBINodeGroup', '[-name Channel]')

• Jython list:

  AdminTask.removeNodeGroupProperty('WBINodeGroup', ['-name', 'Channel'])

Interactive mode example usage:

• Jacl:

  $AdminTask removeNodeGroupProperty {-interactive}

• Jython string:

  AdminTask.removeNodeGroupProperty ('[-interactive]')

• Jython list:

  AdminTask.removeNodeGroupProperty (['-interactive'])

Related

Use the wsadmin scripting AdminTask object for scripted administration

Reference:

Commands for AdminTask using wsadmin.sh

+

Search Tips   |   Advanced Search