+

Search Tips   |   Advanced Search

Use specific directory servers as the LDAP server

Important information about the directory servers that are supported as LDAP servers in WebSphere Application Server are provided.

  • Microsoft Active Directory forests are not supported with the stand-alone LDAP Registry. The Federated Repository Registry, when configured to use an Active Directory LDAP does support the use of forests.

    It is expected that other LDAP servers follow the LDAP specification. Support is limited to these specific directory servers only. We can use any other directory server using the custom directory type in the list and by filling in the filters required for that directory.

    To improve performance for LDAP searches, the default filters for IBM Tivoli Directory Server, Sun ONE, and Active Directory are defined such that when you search for a user, the result contains all the relevant information about the user (user ID, groups, and so on). As a result, the product does not call the LDAP server multiple times. This definition is possible only in these directory types, which support searches where the complete user information is obtained.

    If we use the IBM Directory Server, select the Ignore case for authorization option. This option is required because when the group information is obtained from the user object attributes, the case is not the same as when you get the group information directly. For the authorization to work in this case, perform a case insensitive check and verify the requirement for the Ignore case for authorization option.

    (zos) The LDAP Security Server for the z/OS platform is supported when the DB2 Technical Database Management (TDBM) back-end is used. Use the SecureWay Directory Server filters to connect to the LDAP Security Server for the z/OS platform.

    • (iseries) Use Directory Services as the LDAP server

      Support for groups containing other groups or nested groups depends upon the specific versions of WAS and LDAP. For more information, see Dynamic groups and nested group support for LDAP.

    • Use IBM Tivoli Directory Server as the LDAP server

      To use IBM Tivoli Directory Server, formerly IBM Directory Server, select IBM Tivoli Directory Server as the directory type.

      (zos) We can select either the IBM Tivoli Directory Server or SecureWay directory type for the IBM Directory Server.

      The difference between these two types is group membership lookup. IBM recommends that you choose the IBM Tivoli Directory Server for optimum performance during runtime. In the IBM Tivoli Directory Server, the group membership is an operational attribute. With this attribute, a group membership lookup is done by enumerating the ibm-allGroups attribute for the entry. All group memberships, including the static groups, dynamic groups, and nested groups, can be returned with the ibm-allGroups attribute.

      WebSphere Application Server supports dynamic groups, nested groups, and static groups in IBM Tivoli Directory Server using the ibm-allGroups attribute. To utilize this attribute in a security authorization application, use a case-insensitive match so that attribute values returned by the ibm-allGroups attribute are all in uppercase.

      Important: IBM recommends that we do not install IBM Tivoli Directory Server Version 6.0 on the same machine that you install v8.5. IBM Tivoli Directory Server Version 6.0 includes WebSphere Application Server Express Version 5.1.1, which the directory server uses for its console. Install the Web Administration tool Version 6.0 and WebSphere Application Server ExpressVersion 5.1.1, which are both bundled with IBM Tivoli Directory Server Version 6.0, on a different machine from v8.5. We cannot use v8.5 as the console for IBM Tivoli Directory Server. If IBM Tivoli Directory Server Version 6.0 and v8.5 are installed on the same machine, you might encounter port conflicts.

      If install IBM Tivoli Directory Server Version 6.0 and v8.5 on the same machine, consider the following information:

      • During the IBM Tivoli Directory Server installation process, you must select both the Web Administration tool and WebSphere Application Server Express Version 5.1.1.

      • Install v8.5.

      • When you install v8.5, change the port number for the application server.

      • We might need to adjust the WAS environment variables on v8.5 for WAS_HOME and WAS_INSTALL_ROOT (or APP_SERVER_ROOT for IBM i). To change the variables using the console, click Environment > WebSphere Variables.

    • Use a Lotus Domino Enterprise Server as the LDAP server

      If we select the Lotus Domino Enterprise Server Version 6.5.4 or Version 7.0 and the attribute short name is not defined in the schema, we can take either of the following actions:

      • Change the schema to add the short name attribute.

      • Change the user ID map filter to replace the short name with any other defined attribute (preferably to UID). For example, change person:shortname to person:uid.

      The userID map filter is changed to use the uid attribute instead of the shortname attribute as the current version of Lotus Domino does not create the shortname attribute by default. To use the shortname attribute, define the attribute in the schema and change the userID map filter.

      User ID Map : person:shortname

    • Use Sun ONE Directory Server as the LDAP server

      We can select Sun ONE Directory Server for the Sun ONE Directory Server system. In Sun ONE Directory Server, the object class is the default groupOfUniqueName when creating a group. For better performance, WAS uses the User object to locate the user group membership from the nsRole attribute. Create the group from the role. To use the groupOfUniqueName attribute to search groups, specify our own filter setting. Roles unify entries. Roles are designed to be more efficient and easier to use for applications. For example, an application can locate the role of an entry by enumerating all the roles that are possessed by a given entry, rather than selecting a group and browsing through the members list. When using roles, we can create a group using a:

      • Managed role

      • Filtered role

      • Nested role

      All of these roles are computable by the nsRole attribute.

    • Use Microsoft Active Directory server as the LDAP server

      To use Microsoft Active Directory as the LDAP server for authentication with WebSphere Application Server you must take specific steps. By default, Microsoft Active Directory does not permit anonymous LDAP queries. To create LDAP queries or to browse the directory, an LDAP client must bind to the LDAP server using the distinguished name (DN) of an account that has the authority to search and read the values of LDAP attributes, such as user and group information, needed by the Application Server. A group membership search in the Active Directory is done by enumerating the memberof attribute for a given user entry, rather than browsing through the member list in each group. If we change the default behavior to browse each group, we can change the Group Member ID Map field from memberof:member to group:member.

    The following steps describe how to set up Microsoft Active Directory as the LDAP server.

    1. Determine the full distinguished name (DN) and password of an account in the administrators group.

      For example, if the Active Directory administrator creates an account in the Users folder of the Active Directory Users and Computers Windows control panel and the DNS domain is ibm.com, the resulting DN has the following structure:

        cn=adminUsername, cn=users, dc=ibm, dc=com

    2. Determine the short name and password of any account in the Microsoft Active Directory.

    3. Use the WAS console to set up the information needed to use Microsoft Active Directory.

      1. Click Security > Global security.

      2. Under User account repository, select Standalone LDAP registry and click Configure.

      3. Set up LDAP with Active Directory as the type of LDAP server. Based on the information that is determined in the previous steps, we can specify the following values on the LDAP settings panel:

        Primary administrative user name

        Specify the name of a user with administrative privileges defined in the registry. This user name is used to access the console or used by wsadmin.

        Type

        Specify Active Directory

        Host

        Domain name service (DNS) name of the machine running Microsoft Active Directory.

        Base distinguished name (DN)

        Domain components of the DN of the account chosen in the first step. For example: dc=ibm, dc=com

        Bind distinguished name (DN)

        Specify the full distinguished name of the account chosen in the first step. For example: cn=adminUsername, cn=users, dc=ibm, dc=com

        Bind password

        Specify the password of the account chosen in the first step.

      4. Click OK and Save to save the changes to the master configuration.

    4. Click Security > Global security.

    5. Under User account repository, click the Available realm definitions drop-down list, select Standalone LDAP registry, and click Configure.

    6. Select either the Automatically generated server identity or Server identity stored in the repository option. If we select the Server identity stored in the repository option, enter the following information:

      Server user ID or administrative user on a Version 6.0.x node

      Specify the short name of the account chosen in the second step.

      Server user password

      Specify the password of the account chosen in the second step.

    7. Optional: Set ObjectCategory as the filter in the Group member ID map field to improve LDAP performance.

      1. Under Additional properties, click Advanced LDAP user registry settings .

      2. Add ;objectCategory:group to the end of the Group member ID map field.

    8. Click OK and Save to save the changes to the master configuration.

    9. Stop and restart the administrative server so that the changes take effect.


    Related concepts

  • Standalone Lightweight Directory Access Protocol registries


    Related tasks

  • Configure Lightweight Directory Access Protocol user registries
  • Locating user group memberships in a Lightweight Directory Access Protocol registry

  • Advanced Lightweight Directory Access Protocol user registry settings
  • Standalone LDAP registry settings