Data access problems - DB2 database

 

+

Search Tips   |   Advanced Search

 

  1. SQL0567N "DB2ADMIN " is not a valid authorization ID. SQLSTATE=42602
  2. SQL0805N Package package-name was not found
  3. SQL0805N Package "NULLID.SQLLC300" was not found. SQLSTATE=51002
  4. SQL30082N Attempt to establish connection failed with security reason "17" ("UNSUPPORTED FUNCTION') SQLSTATE=08001
  5. SQLException, with ErrorCode -99,999 and SQLState 58004, with Java "StaleConnectionException: COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver] CLI0119E Unexpected system failure. SQLSTATE=58004", when using WAS40-type data source
  6. Error message java.lang.reflect.InvocationTargetException: com.ibm.ws.exception.WsException: DSRA0023E: The DataSource implementation class "COM.ibm.db2.jdbc.DB2XADataSource" could not be found. when trying to access a DB2 database
  7. CLI0119E System error. SQLSTATE=58004 - DSRA8100 : Unable to get a XAconnection or DSRA0011E: Exception: COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver] CLI0119E Unexpected system failure. SQLSTATE=5800
  8. COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver][DB2/NT] SQL0911N The current transaction has been rolled back because of a deadlock or timeout. Reason code "2". SQLSTATE=40001
  9. "COM.ibm.db2.jdbc.DB2ConnectionPoolDataSource" could not be found for data source ([data-source-name])"
  10. java.sql.SQLException: Failure in loading T2 native library db2jcct2 DSRA0010E: SQL State = null, Error Code = -99,999
  11. Lock contention exception occurs in database when data source implementation type is XA
  12. "DSRA8050W: Unable to find the DataStoreHelper class specified" exception occurs when trying to use a DB2 Universal Datasource in a mixed release cell.
  13. Receive "'SYSTEM' is not a valid authorization ID" message when trying to access DB2 on a Windows machine where WAS is also installed.
  14. XAException: XAER_NOTA on XA prepare call in DB2 Universal JDBC Driver type 4 after one phase transaction rollback
  15. java.rmi.MarshalException logged for application client due to incompatibility of JDBC driver file versions
  16. Database failure triggers problematic -99999 exception for applications that use DB2 Universal Driver type 4
  17. Cannot access DB2 on Linux when using the DB2 Universal JDBC Driver
  18. Test connection operation fails for DB2 legacy CLI-based Type 2 driver that is used to access DB2 running on 64-bit Linux
  19. Illegal conversion occurs on any VARCHAR FOR BIT DATA column in a container-managed persistent bean

 

SQL0567N "DB2ADMIN " is not a valid authorization ID. SQLSTATE=42602

If you encounter this error when attempting to access a DB2 Universal Database (UDB):

  1. Verify that your user name and password in the data source properties page in the console are correct.

  2. Ensure that the user ID and password do not contain blank characters before, in between, or after.

 

SQL0805N Package package-name was not found

Possible reasons for these exceptions:

To correct the problem on a DB2 Universal Database (UDB), run this one-time procedure, using the db2cmd interface while connected to the database in question:

  1. DB2 bind @db2ubind.lst blocking all grant public

  2. DB2 bind @db2cli.lst blocking all grant public

The db2ubind.lst and db2cli.lst files are in the bnd directory of your DB2 installation root. Run the commands from that directory.

 

SQL0805N Package "NULLID.SQLLC300" was not found. SQLSTATE=51002

This error can occur because:

To resolve this problem, rebind the DB2 packages by running the db2cli.lst script found in the bnd directory. For example: db2>@db2cli.lst.

 

SQL30082N Attempt to establish connection failed with security reason "17" ("UNSUPPORTED FUNCTION') SQLSTATE=08001

This error can occur when the security mechanism specified by the client is not valid for this server. Some typical examples:

To resolve this problem, ensure that your client and server use the same security mechanism. For example, if this is an error on your data source, verify that you have assigned a user id and password or authentication alias.

 

SQLException, with ErrorCode -99,999 and SQLState 58004, with Java "StaleConnectionException: COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver] CLI0119E Unexpected system failure. SQLSTATE=58004", when using WAS40-type data source

An unexpected system failure usually occurs when running in XA mode (two-phase commit). Among the many possible causes are:

To determine whether you have a user name or password problem, look in the db2diag.log file to view the actual error message and SQL code. A message like the following example, with an SQLCODE of -1403, indicates an invalid user ID or password:

2002-07-26-14.19.32.762905   Instance:db2inst1   Node:000
PID:9086(java)   Appid:*LOCAL.db2inst1.020726191932
XA DTP Support  sqlxa_open   Probe:101
DIA4701E Database "POLICY2" could not be opened  for distributed transaction processing.
String Title: XA Interface SQLCA  PID:9086 Node:000
SQLCODE = -1403
To resolve these problems:

  1. Correct your user name and password. If you specify your password on the GUI for the data source, ensure that the user name and password you specify on the bean are correct. The user name and password you specify on the bean overwrite whatever you specify when creating the data source.

  2. Use the correct database name.

  3. Rebind the packages (in the bnd directory) as follows:

    db2connect to dbname c:\SQLLIB\bnd>DB2 bind @db2ubind.lst blocking all grant public c:\SQLLIB\bnd>DB2 bind @db2cli.lst blocking all grant public
    

  4. Ensure that the \WebSphere\AppServer\properties\wsj2cdpm.properties file has the right user ID and password.

 

Error message java.lang.reflect.InvocationTargetException: com.ibm.ws.exception.WsException: DSRA0023E: The DataSource implementation class "COM.ibm.db2.jdbc.DB2XADataSource" could not be found. when trying to access a DB2 database

One possible reason for this exception is that a user is attempting to use a JDBC 2.0 DataSource, but DB2 is not JDBC 2.0-enabled. This situation frequently happens with new installations of DB2 because DB2 provides separate drivers for JDBC 1.X and 2.0, with the same physical file name. By default, the JDBC 1.X driver is on the class path. To confirm this problem:

To correct this problem:

 

CLI0119E System error. SQLSTATE=58004 - DSRA8100 : Unable to get a XAconnection or DSRA0011E: Exception: COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver] CLI0119E Unexpected system failure. SQLSTATE=5800

If you encounter this error when attempting to access a DB2 Universal Database (UDB) data source:

  1. On the data source properties page in the console, verify that the correct database name is specified on the data source.

  2. On the custom properties page, check your user name and password custom properties. Verify that they are correct.

  3. Ensure the user ID and password do not contain any blank characters, before, in between, or after.

  4. Check that the WAS.policy file exists for the application, for example, D:\WebSphere\AppServer\installedApps\markSection.ear\META-INF\was.policy.

  5. View the entire exception listing for an underlying SQL error, and look it up using the DBM vendor message reference.

If you encounter this error while running DB2 on Red Hat Linux, the max queues system wide parameter is too low to support DB2 while it acquires the necessary resources to complete the transaction. When this problem exists, the exceptions J2CA0046E and DSRA0010E can precede the exception DSRA8100E.

To correct this problem, edit the /proc/sys/kernal/msgmni file to increase the value of the max queues system wide parameter to a value greater than 128.

 

COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver][DB2/NT] SQL0911N The current transaction has been rolled back because of a deadlock or timeout. Reason code "2". SQLSTATE=40001

This problem is probably an application-caused DB2 deadlock, particularly if you see an error similar to the following when accessing a DB2 data source:

ERROR CODE: -911
COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver][DB2/NT] SQL0911N
The current transaction has been rolled back because of a deadlock or timeout.
Reason code "2".  SQLSTATE=40001
To diagnose the problem:

  1. Execute these DB2 commands:

    1. db2 update monitor switches using LOCK ON

    2. db2 get snapshot for LOCKS on dbName >

    The directory_name\lock_snapshot.log now has the DB2 lock information.

  2. Turn off the lock monitor by running: db2 update monitor switches using LOCK OFF

To verify that you have a deadlock:

  1. Look for an application handle that has a lock-wait status, and then look for the ID of the agent holding lock to verify the ID of the agent.

  2. Go to that handle to verify it has a lock-wait status, and the ID of the agent holding the lock for it. If it is the same agent ID as the previous one, then you know that you have a circular lock (deadlock).

To resolve the problem:

  1. Examine your application and use a less restrictive isolation level if no concurrency access is needed.

  2. Use caution when changing the accessIntent value to move to a lower isolation level. This change can result in data integrity problems.

  3. For DB2/UDB V7.2 and earlier releases, you can set the DB2_RR_TO_RS flag from the DB2 command line window to eliminate unnecessary deadlocks, such as when the accessIntent defined on the bean method is too restrictive, for example, PessimisticUpdate. The DB@_RR_TO_RS setting has two impacts:

    • If RR is your chosen isolation level, it is effectively downgraded to RS.

    • If you choose another isolation level, and the DB2_RR_TO_RS setting is on, a scan skips over rows that are deleted but not committed, even though the row might qualify for the scan. The skipping behavior affects the RR, Read Stability (RS), and Cursor Stability (CS) isolation levels.

    For example, consider the scenario where transaction A deletes the row with column1=10 and transaction B does a scan where column1>8 and column1<12. With DB2_RR_TO_RS off, transaction B waits for transaction A to commit or rollback. If transaction A rolls back, the row with column1=10 is included in the result set of the transaction B query. With DB2_RR_TO_RS on, transaction B does not wait for transaction A to commit or rollback. Transaction B immediately receives query results that do not include the deleted row. Setting DB2_RR_TO_RS effectively changes locking behavior, thus avoiding deadlocks.

 

"COM.ibm.db2.jdbc.DB2ConnectionPoolDataSource" could not be found for data source ([data-source-name])"

This error is denoted by message DSRA8040I: Failed to connect to the DataSource.

This error usually occurs when the class path of the DB2 JDBC driver is set correctly to ${DB2_JDBC_DRIVER_PATH}/db2java.zip but the environment variable DB2_JDBC_DRIVER_PATH is not set.

This error can also occur if you are using DB2 V7.1 or 7.2 and you have not yet run usejdbc2. This might be the problem if your path is correct but you still receive this error. To confirm this problem:

  1. Go to the Manage WebSphere Variables panel.

  2. Select Environment to verify that there is no entry for the variable DB2_JDBC_DRIVER_PATH.

To correct this problem: Add the variable DB2_JDBC_DRIVER_PATH with value equal to the directory path containing the db2java.zip file.

 

java.sql.SQLException: Failure in loading T2 native library db2jcct2 DSRA0010E: SQL State = null, Error Code = -99,999

The Failure in loading message indicates one of two things:

 

Lock contention exception occurs in database when data source implementation type is XA

Because a lock contention exception can be caused by many factors, consider the following explanation and recommended response as a strategy for eliminating the possible reasons for your lock contention problem.

Symptom A lock contention exception occurs in a DB2 database that your application accesses through a data source of implementation type XA.
Problem Your application is trying to access database records that are locked by an XA transaction that is in ended (e) state, but cannot be prepared by the transaction manager.
Description An XA transaction to DB2 that ends, but cannot be prepared, is in ended (e) state. Because it is not considered to be in doubt, the transaction manager cannot recover this transaction. DB2 does not return it in the list of in doubt transactions.

DB2 also does not roll the transaction back immediately; it waits until all connections to the database are released. During this period of inaction, the transaction continues to hold locks on the database. If your appserver does not disconnect all connections from the database to allow rollback, the ended transaction persists in locking the same database records. If your application attempts to access these locked records, a lock contention exception occurs in DB2.

Recommended response DB2 V8.2 is shipped with a sample application that connects to a defined DB2 server and uses the available DB2 APIs to obtain a list of these particular ended transactions. The application offers a configuration setting that enables you to designate an amount of time after which the application rolls these transactions back. Locate the sample application in the sqllib/samples/db2xamon.c directory of DB2 V8.2 and run it.

 

"DSRA8050W: Unable to find the DataStoreHelper class specified" exception occurs when trying to use a DB2 Universal Datasource in a mixed release cell.

This error usually occurs when you are using WAS V6.0 or above in conjunction with a previous version and attempt to create a DB2 Universal Datasource on the previous version.

This can happen because the DB2 Universal Datasource was not available on V5 and previous versions, but the V6 administrative console allows you to build one.

To correct this problem: create the datasource on V6.0 or later.

 

Receive "'SYSTEM' is not a valid authorization ID" message when trying to access DB2 on a Windows machine where WebSphere Application Server is also installed.

Symptom For a WAS on Windows installation that uses DB2 as the backend, you see the following exception in the JVM log:

java.sql.SQLException: [IBM][CLI Driver] SQL0567N  "SYSTEM" is not a valid  authorization ID.  SQLSTATE=42602 DSRA0010E: SQL State = 42602, Error Code = -567
       at COM.ibm.db2.jdbc.app.SQLExceptionGenerator.throw_SQLException
             (Unknown Source)
       at COM.ibm.db2.jdbc.app.SQLExceptionGenerator.check_return_code
              (Unknown Source)
       at COM.ibm.db2.jdbc.app.DB2Connection.connect(Unknown Source)
       at COM.ibm.db2.jdbc.app.DB2Connection.<init>(Unknown Source)
       at COM.ibm.db2.jdbc.app.DB2ReusableConnection.<init>(Unknown Source)
       at COM.ibm.db2.jdbc.DB2PooledConnection.getConnection(Unknown Source)
       at com.ibm.ws.rsadapter.spi.WSRdbDataSource.getConnection
              (WSRdbDataSource.java:1035)
       at com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl.
           createManagedConnection(WSManagedConnectionFactoryImpl.java:937)
       at com.ibm.ejs.j2c.poolmanager.FreePool.
           createManagedConnectionWithMCWrapper(FreePool.java:1502)

Problem This exception occurs for configurations in which WebSphere Application Server is a client to the DB2 server. The underlying problem is an authorization conflict between WAS on Windows and DB2 that arises when an application attempts to connect to DB2 without providing a user ID and a password.
Description When a DB2 client and the DB2 database run on the same machine, DB2 allows the client to connect without a user ID and password. The connection is made under the credentials of the user that owns the client process: in this case, the appserver JVM. However, if WebSphere Application Server runs as a Windows service, and the "Log on as" option is set to "Local System Account", the application server JVM is categorized as a subcomponent of a special Windows user called SYSTEM. This user is not allowed to connect to DB2, resulting in the previously shown exception.
Recommended response You have two options:

  • Modify the WebSphere Application Server service to use a Log on as option of This account, and provide an account with permission to connect to DB2. Or

  • Configure your appserver to provide credentials on the DB2 connection by using container-managed or component-managed authentication.

 

XAException: XAER_NOTA on XA prepare call in DB2 Universal JDBC Driver type 4 after one phase transaction rollback

Symptom For applications that use the DB2 Universal JDBC Driver type 4 XA available with DB2 v8.2, a connection might fail and trigger an XAER_NOTA XAException error. The following code block is an example of this exception:

J2CA0027E: An exception occurred while invoking prepare on an XA Resource Adapter from dataSource jdbc/SDOSVT, within transaction ID {XidImpl: formatId(57415344), gtrid_length(36), bqual_length(54), data(000000ff5191398200000001000000296cac5c42fe3c6838631cbaafc8b5a9253b846544
000000ff5191398200000001000000296cac5c42fe3c6838631cbaafc8b5a9253b8465440000000
10000000000000000000000000002)}: javax.transaction.xa.XAException: XAER_NOTA at com.ibm.db2.jcc.a.xb.a(xb.java:1682) at com.ibm.db2.jcc.a.xb.a(xb.java:841) at com.ibm.db2.jcc.a.xb.prepare(xb.java:812) at com.ibm.ws.rsadapter.spi.WSRdbXaResourceImpl.prepare (WSRdbXaResourceImpl.java:837)
...

Problem

If a DB2 Universal JDBC Driver type 4 XA connection is used in a single-phase transaction, such as a local transaction with autocommit set to false, and that single-phase transaction is rolled back, the next use of the connection in a two-phase transaction fails on the prepare call.

A problem in the DB2 Universal JDBC Driver type 4 XA support causes the XA prepare call to fail. This problem does not occur if the single-phase transaction is committed, and it does not occur when using the DB2 Universal JDBC Driver in type 2 mode.

Solution

Upgrade to DB2 V8.2 Fix Pack 1, which is equivalent to V8.1 Fix Pack 8. The Universal JDBC Driver XA that is available with these releases solves the previously described issue for type 4 mode.

 

java.rmi.MarshalException logged for application client due to incompatibility of JDBC driver file versions

Symptom For an application that includes a J2EE application client, the following error message is displayed in the client log file of the appserver:

java.rmi.MarshalException: CORBA MARSHAL
0x4942f89a No; nested exception is: org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : Mismatched serialization
UIDs : Source (Rep.
IDRMI:com.ibm.db2.jcc.c.SqlException:63EEE52211DCD763:82CE0C0DA2B0A000)
= 82CE0C0DA2B0A000 whereas Target (Rep. ID
RMI:com.ibm.db2.jcc.c.SqlException:63EEE52211DCD763:91C6171BC645E41B)
= 91C6171BC645E41B  vmcid: 0x4942f000  minor code:
2202  completed: No 

Problem

The db2jcc.jar files on the application client machine and on your appserver are from versions of DB2 that are not compatible with each other, or are not compatible with the version of DB2 that functions as the datastore.

Solution

Check the db2jcc.jar files on the application client machine, your appserver, and your DB2 server. On the client machine and the appserver, install files of the same version that is compatible with the DB2 server.

 

Database failure triggers problematic -99999 exception for applications that use DB2 Universal Driver type 4

Symptom

If you use the DB2 Universal Driver type 4 for access to DB2 or Cloudscape Network Server, and your database fails, the database server issues a generic -99999 exception in response to every JDBC getConnection request. This exception, which is exemplified in the following code excerpt, can cause unexpected behavior in your applications.

java.sql.SQLException: IO Exception opening socket to 
  server bs8.rchland.ibm.com on port 1527.
The DB2 Server may be down.DSRA0010E: SQL State = null,
  Error Code = -99,999DSRA0010E: SQL State = null,
Error Code = -99,999 at com.ibm.db2.jcc.b.a.<init>(a.java:125) at com.ibm.db2.jcc.b.b.a(b.java:1011) at com.ibm.db2.jcc.c.l.<init>(l.java:197) at com.ibm.db2.jcc.b.b.<init>(b.java:258) at com.ibm.db2.jcc.DB2PooledConnection.
  <init>(DB2PooledConnection.java:44) at com.ibm.db2.jcc.DB2ConnectionPoolDataSource.getPooledConnectionX
  (DB2ConnectionPoolDataSource.java:80) at com.ibm.db2.jcc.DB2ConnectionPoolDataSource.getPooledConnection
  (DB2ConnectionPoolDataSource.java:45) at com.ibm.ws.rsadapter.DSConfigurationHelper$1.run
  (DSConfigurationHelper.java:945)

Problem

When running in type 4 mode, some versions of the DB2 Universal Driver trigger a generic exception for database failure rather than a specific error code that WAS can map to a stale connection exception. This problem occurs with versions of the driver that are associated with DB2 8.1 Fix Pack 6 or Fix Pack 7, and DB2 8.2.

Solution

Upgrade to DB2 V8.2 Fix Pack 1, equivalent to V8.1 Fix Pack 8, which provides a valid error code in the previously described scenario. WebSphere Application Server maps this error code to a StaleConnectionException, as expected.

 

Cannot access DB2 on Linux when using the DB2 Universal JDBC Driver

Symptom In the WAS on Linux environment, applications that use the DB2 Universal JDBC Driver to access DB2 on Linux might not connect with the database. The database server can issue the following exceptions to the appserver error log:

Problem

The process for configuring DB2 on Linux to work with the Universal JDBC Driver is not complete.

Solution

 

Test connection operation fails for DB2 legacy CLI-based Type 2 driver that is used to access DB2 running on 64-bit Linux

Symptom If you run DB2 on 64-bit Linux using the AMD OpteronTM processor, the test connection operation fails for data sources that are configured with the DB2 legacy CLI-based Type 2 driver. You see the following error message in the console:

[3/8/05 16:27:19:020 CST] 0000003c DataSourceCon E DSRA8040I: 
Failed to connect to the DataSource.
Encountered "": java.lang.UnsatisfiedLinkError: 
COM/ibm/db2/jdbc/app/DB2Connection.SQLConnect (Ljava/lang/String;II)I

Problem

Your version of 64-bit DB2, V8.1 Fix Pack 8, does not support the DB2 legacy CLI-based Type 2 driver on the ADM64 platform. This version of DB2 does not have the library libdb2jdbc.so, which is required by the driver.

Solution

Upgrade DB2 v8.1 to fix pack 9.

 

Illegal conversion occurs on any VARCHAR FOR BIT DATA column in a container-managed persistent bean

When enterprise beans with container-managed persistent (CMP) types that have any VARCHAR FOR BIT DATA columns defined on a DB2 table are deployed in the DB2 universal JDBC type 4 driver to persist the data, an SQLException of illegal conversion is thrown at run time. This exception only occurs when you use the DB2 universal JDBC type 4 driver and with the deferPrepares property being set to true. When the deferPrepares property is set to true, the DB2 universal JDBC type 4 driver uses the standard JDBC data mapping.

Currently, the generated deployed code does not follow the standard JDBC specification mapping. The failure at execution time is because of a problem in the tool that prepared the enterprise beans for execution. To avoid receiving this exception, choose one of the following options:




 

Related tasks


Example: Using IBM extended APIs to share connections between CMP beans and BMP beans

 

Related Reference


Data access problems
Data access problems - Oracle data source
Data access problems - SQL server data source
Data access problems - Cloudscape database
Data access problems - Sybase data source
Extensions to data access APIs

 

Reference topic