Home

 

Explanation of terms

 

1 Configuration file name

This is the unique name of the SNAP-IX configuration file. The default for this name is sna_node.cfg.

Although it is possible to edit this file, it is strongly recommended that configuration is done using xsnadmin.

2 Control point name

This is the unique Control point name for this workstation. In the SNA network, the Control point is an addressable location (PU type 2.1). Your network administrator will assign this to you.

3 Node ID to send

This is the unique ID of this workstation. On other platforms this is often referred to as the Exchange ID or XID. Your network administrator will assign this ID for you.

4 Network name

This is the unique ID of the network to which you are connected. It is an alphanumeric value and can be 1-8 characters long. The network name works with the Control point name to uniquely identify a system. Your network administrator will tell you the value.

5 Local APPC LU

An LU manages the exchange of data between transactions. The local APPC LU name is the name of the LU on your system. Your network administrator will assign this to you.

6 APPC mode

This is the name given to the set of parameters that control the APPC conversation. This name must be defined at each partner system. Your network administrator will assign this to you.

7 Invokable TP

WebSphere MQ applications trying to converse with this workstation will specify a symbolic name for the program to be run at the receiving end. This will have been defined on the channel definition at the sender. For simplicity, wherever possible use a transaction program name of MQSERIES, or in the case of a connection to VSE/ESA™, where the length is limited to 4 bytes, use MQTP.

8 Local MAC address

This is the network address of the token-ring card. The address to be specified is found in the ether value displayed in response to the ifconfig tr0 command issued at a root level of authority. (Tr0 is the name of the machine’s token-ring interface.) If you do not have the necessary level of authority, your Sun Solaris system administrator can tell you the value.

9 Port name

This is a meaningful symbolic name that is used to associate the definitions with a network interface (in this case, a Token-Ring adapter). A separate Port must be defined for each physical device attached to the workstation.

10 Full path to executable

This is the path and name of the script file that invokes the WebSphere MQ program to run.

11 Local queue manager

This is the name of the queue manager on your local system.

10 Link station name

This is a meaningful symbolic name by which the connection to a peer or host node is known. It defines a logical path to the remote system. Its name is used only inside SNAP-IX and is specified by you. The connection must be associated with an existing Link and owned by one local node. You must define one connection for each partner or host system.

18 CPI-C symbolic destination name

This is a name given to the definition of a partner node. You choose the name. It need be unique only on this machine. Later we can use this name in the WebSphere MQ sender channel definition.

20 Node ID to receive

This is the unique ID of the partner workstation with which you will be communicating. On other platforms this is often referred to as the Exchange ID or XID. For a connection to a host system any values except 000 FFFFF and FFF FFFFF may be specified. Your network administrator will assign this ID for you.

 

Parent topic:

Configuration parameters for an LU 6.2 connection using SNAP-IX

ic13910_

 

Home