responsefile

 

---

 # *******************************************
 #
 # Response file for WAS 5.0 Install
 #
 # Please follow the comments to use the response file and 
 # understand the various options.  You must carefully complete 
 # or change the various values. If the values are not completed
 # properly, the install may be unsuccessful.
 # 
 #
 # IMPORTANT: ALL VALUES MUST BE ENCLOSED IN DOUBLE QUOTES ( "" ).
 #
 # *******************************************
 
 # *******************************************
 # This value is required.
 # PLEASE DO NOT REMOVE THIS VALUE.
 # *******************************************
 
 -W setupTypes.selectedSetupTypeId="custom"
 
 
 # *******************************************
 # Below is the beginning of the response file that needs to be 
 # filled in by the user.
 # *******************************************
 
 # *******************************************
 # The below value specifies silent install. This value
 # indicates that the install will be silent. If you wish not to install
 # silently, just delete this value.
 # *******************************************
 
 -silent
 
 
 # *******************************************
 # WAS Install Location
 #
 # Please specify the destination directory for the WebSphere Application
 # Server installation.   You will need to change this for UNIX 
 # platforms. As an example for AIX, the value may be
 # "/usr/WebSphere/AppServer"
 # *******************************************
 
 -P wasBean.installLocation="C:\Program Files\WebSphere\AppServer"
 
 
 # *******************************************
 # IBM HTTP Server Install Location
 #
 # Please specify the destination directory for the IBM HTTP Server
 # installation.  This value will need to be completed if you
 # choose to install IBM HTTP Server.  If you choose to not install IBM
 # HTTP Server, then this value is not required.  You will need to change 
 # the default value below for UNIX platforms.  As an example for AIX, the
 # value may be "/usr/IBMHTTPServer"
 # *******************************************
 
 -P ihsFeatureBean.installLocation="C:\Program Files\IBMHTTPServer"
 
 
 # *******************************************
 # Below are the features that you may choose to install.
 # Set the following values to "true" or "false," depending upon whether 
 # you want to install the following features or not.
 #
 # NOTE: The default settings for features in this response file 
 #       detail the defaults for a typical installation.
 # *******************************************
 
 
 # *******************************************
 # Install Server
 # *******************************************
 
 -P serverBean.active="true"
 
 
 # *******************************************
 #
 # Begin Features for Administration
 #
 # *******************************************
 
 # *********
 # Install Administration
 # *********
 
 -P adminBean.active="true"
 
 # *********
 # The next 2 features are part of Administration. In order for any of these
 # features to be installed, the property to install Administration denoted 
 # above must be set to "true."
 # *********
 
 # *********
 # Install Admin Scripting
 # *********
 
 -P adminScriptingFeatureBean.active="true"
 
 # *********
 # Install Administrative Console
 # *********
 
 -P adminConsoleFeatureBean.active="true"
 
 # *******************************************
 #
 # End Features for Administration
 #
 # *******************************************
 
 
 # *******************************************
 #
 # Begin Features for Application Assembly and Deployment Tools
 #
 # *******************************************
 
 # *********
 # Install Application Assembly and Deployment Tools
 # *********
 
 -P applicationAndAssemblyToolsBean.active="true"
 
 # *********
 # The next 3 features are part of Application Assembly and Deployment
 # Tools. In order for any of these features to be installed, 
 # the property to install Application And Assembly Tools denoted 
 # above must be set to "true."
 # *********
 
 # *********
 # Install Application Assembly Tool
 # *********
 
 -P applicationAssemblyToolBean.active="true"
 
 # ********* 
 # Install Deploy Tool
 # *********
 
 -P deployToolBean.active="true"
 
 # *********
 # Install Ant Utilities
 # *********
 
 -P antUtilityBean.active="true"
 
 # *******************************************
 #
 # End Features for Application Assembly and Deployment Tools
 #
 # *******************************************
 
 
 # *******************************************
 #
 # Begin Features for Embedded Messaging
 #
 # *******************************************
 
 # ********* 
 # Install Embedded Messaging
 # *********
 
 -P mqSeriesBean.active="true"
 
 # *********
 # The next three features are for Embedded Messaging.  In order to install
 # any of the following three subfeatures, the property to install Embedded
 # Messaging denoted above must be set to "true."
 # 
 # IMPORTANT NOTE:  If you do not want to install Embedded Messaging, please
 # ensure all of the following options are set to "false" as well as the above
 # option. 
 # *********
 
 # ********* 
 # Install Embedded Messaging Server and Client
 #
 # You may only install the Embedded Messaging Server and Client or the Embedded
 # Messaging client below.  If you set the Server and Client to "true," please
 # ensure that the Client only option below is set to "false."  The same applies
 # if you set the Client only option to "true," please ensure the server and client
 # option is set to "false."
 # *********
 
 -P mqSeriesServerBean.active="true"
 
 # *********
 # Embedded Messaging Server and Client install location
 #
 # If you choose to install Embedded Messaging Server and Client above, please
 # specify an install location below for Windows platforms only.
 # The directory may not be configured by the user for UNIX platforms
 # as it is predetermined.
 # *********
 
 -P mqSeriesServerBean.installLocation="C:\Program Files\IBM\WebSphere MQ"
 
 # *********
 # Install Embedded Messaging Client only
 # *********
 
 -P mqSeriesClientBean.active="false"
 
 # *********
 # Embedded Messaging Client Only install location
 #
 # If you choose to install Embedded Messaging Client only above, please
 # specify an install location below for Windows platforms only.
 # The directory may not be configured by the user for UNIX platforms
 # as it is predetermined.
 # *********
 
 -P mqSeriesClientBean.installLocation="C:\Program Files\IBM\WebSphere MQ"
 
 # *********
 # Install Message-driven beans Samples
 # *********
 
 -P mqSeriesSamplesBean.active="true"
 
 # *******************************************
 #
 # End Features for Embedded Messaging
 #
 # *******************************************
 
 
 # *******************************************
 # Install IHS WebServer 1.3.26
 # *******************************************
 
 -P ihsFeatureBean.active="true"
 
 
 # *******************************************
 #
 # Begin Features for Web Server Plugins
 #
 # *******************************************
 
 # *********
 # Install Web Server Plugins
 # *********
 
 -P pluginBean.active="true"
 
 # *********
 # The next 5 features are part of Web Server Plugins. 
 # In order for any of these features to be installed, 
 # the property to install Web Server Plugins denoted 
 # above must be set to "true."
 # *********
 
 # *********
 # Install IBM HTTP Server Plugin
 # *********
 
 -P ihsPluginBean.active="true"
 
 # *********
 # Install Apache Web Server Plugin
 # *********
 
 -P apachePluginBean.active="false"
 
 # *********
 # Install Microsoft Internet Information Services (IIS) Plugin
 # *********
 
 -P iisPluginBean.active="false"
 
 # *********
 # Install iPlanet Web Server Plugin
 # *********
 
 -P iplanet60PluginBean.active="false"
 
 # *********
 # Install Domino Web Server Plugin
 # *********
 
 -P dominoPluginBean.active="false"
 
 # *******************************************
 #
 # End Features for Web Server Plugins
 #
 # *******************************************
 
 
 # *******************************************
 # Install Samples
 # *******************************************
 
 -P samplesBean.active="true"
 
 
 # *******************************************
 #
 # Begin Features for Performance and Analysis Tools
 #
 # *******************************************
 
 # *********
 # Install Performance And Analysis Tools
 # *********
 
 -P performanceAndAnalysisToolsBean.active="true"
 
 # *********
 # The next 3 features are part of Performance And Analysis 
 # Tools. In order for any of these features to be installed, 
 # the property to install Performance And Analysis Tools denoted 
 # above must be set to "true."
 # *********
 
 # *********
 # Install Tivoli Performance Viewer
 # *********
 
 -P tivoliPerfBean.active="true"
 
 # *********
 # Install Dynamic Cache Monitor
 # *********
 
 -P DCMBean.active="true"
 
 # *********
 # Install Performance Servlet
 # *********
 
 -P performanceServletBean.active="true"
 
 # *******************************************
 #
 # End Features for Performance and Analysis Tools
 #
 # *******************************************
 
 
 # *******************************************
 # Install Javadocs
 # *******************************************
 
 -P javadocBean.active="true"
 
 
 # *******************************************
 # Please enter a node name and hostname for this installation.  
 # The node name is used for administration, and must be unique 
 # within its group of nodes (cell).  The hostname is the DNS name 
 # or IP address for this computer.  You must replace the 
 # "DefaultNode" with the node name that you want the default node 
 # to be and "127.0.0.1" to a resolveable hostname or IP address 
 # for your machine.
 
 # Warning: If you are migrating now or plan to do so after 
 # installation, enter the same node name as the previous version.
 # *******************************************
 
 -W nodeNameBean.nodeName="DefaultNode"
 -W nodeNameBean.hostName="127.0.0.1"
 
 
 # *******************************************
 # Begin Installing Services 
 #
 # The following are to install Services for IHS and Websphere 
 # Application Server on Windows.  Using Services, you can start and 
 # stop services, and configure startup and recovery actions. 
 # You can ignore these or comment them out for other Operating Systems.
 # *******************************************
 
 -W serviceSettingsWizardBean.active="true"
 
 # *********
 # The next 2 options are part of Installing Services. 
 # In order for any of these to be set to "true," 
 # the property to install Services denoted above must be set 
 # to "true."
 # *********
 
 # *********
 # Install the IHS service
 # *********
 
 -W serviceSettingsWizardBean.ihsChoice="true"
 
 # *********
 # Install the WAS service
 # *********
 
 -W serviceSettingsWizardBean.wasChoice="true"
 
 # *********
 # If you chose to install a service above, then 
 # specify the User Name and Password which are required to 
 # install the Services. The current user must be admin or must 
 # have admin authority to install a Service. Also the username 
 # which is given here must have "Log On as a Service " authority 
 # for the service to run properly.
 # *********
 
 # *********
 # Replace YOUR_USER_NAME with your username.
 # *********
 
 -W serviceSettingsWizardBean.userName="YOUR_USER_NAME"
 
 # *********
 # Replace YOUR_PASSWORD with your valid password.
 # *********
 
 -W serviceSettingsWizardBean.password="YOUR_PASSWORD"
 
 # *******************************************
 # 
 # End Installing Services 
 #
 # *******************************************
 
 
 # *******************************************
 # Set any or all of the following to false if the launcher 
 # icon is not to be installed.  These settings will only affect 
 # an install in which the corresponding product component
 # is also selected for install.
 # *******************************************
 
 -P StartServerIconBean.active="true"
 -P StopServerIconBean.active="true"
 -P AdminConsoleIconBean.active="true"
 -P AssemblyToolIconBean.active="true"
 -P SamplesGalleryIconBean.active="true"
 -P TivoliPerfIconBean.active="true"
 -P infoCenterIconBean.active="true"
 -P firstStepsIconBean.active="true"
 -P logAnalyzerIconBean.active="true"
 
 
 # *******************************************
 # Change the path to the prerequisite checker configuration 
 # file only if a new file has been provided.  This can be a 
 # relative path or an absolute path.  Make sure both the
 # prereqChecker.xml and prereqChecker.dtd files are present at the provided path.
 # *******************************************
 
 -W osLevelCheckActionBean.configFilePath="waspc/prereqChecker.xml"
 
 
 # *******************************************
 # Begin Plugin Config File Location
 #
 # If you chose to install plugins above, then you will
 # need to specify the fully qualified path, including 
 # the config file name, for the plugins you selected.  If you want to 
 # install the plugin,  specify this path, otherwise the 
 # installer will fail to install the plugins properly.  Also, the 
 # value must be included in double quotes.
 # *******************************************
 
 # *********
 # IBM HTTP Server Plugin Config File Location
 # *********
 
 -W defaultIHSConfigFileLocationBean.value="C:\Program Files\IBMHTTPServer\conf\httpd.conf"
 
 # *********
 # Apache Web Server Config File Location
 # *********
 
 -W defaultApacheConfigFileLocationBean.value=
 
 # *********
 # iPlanet Web Server Config File Location
 # *********
 
 -W defaultIPlanetConfigFileLocationBean.value=
 
 # *********
 # Begin Domino Web Server Plugin Config File Locations
 # 
 # The Notes.jar and names.nsf locations are required
 # for the Domino Plugin.  Please be sure to enter values in
 # double quotes for both of these files.
 # *********
 
 # *********
 # Domino Notes.jar File Location
 # *********
 
 -W dominoPanelBean.notesJarFile=
 
 # *********
 # Domino names.nsf File Location
 # *********
 
 -W dominoPanelBean.namesFile=
 
 # *********
 # End Domino Web Server Plugin Config File Locations
 # *********
 
 # *******************************************
 # 
 # End Plugin Config File Location
 #
 # *******************************************
 
 
 # *******************************************
 # Product Registration Tool
 #
 # To launch the Product Registration Tool, please 
 # change the value to "true." This is only for
 # GUI install.
 # *******************************************
 
 -W launchPRTBean.active="false"
 
 
 # *******************************************
 # Install Default App
 #
 # Please specify if you would like to install the 
 # Default App by setting the value to "true" or "false."
 # *******************************************
 
 -W installSampleAppSequenceBean.active="true"
 
 
 # *******************************************
 # First Steps
 # 
 # If you would the First Steps to display at the end
 # of the installation, please change the value to "true."
 # *******************************************
 
 -W firstStepsSequenceBean.active="false"
 
 
 # *******************************************
 # Installation Verification Tool  (IVT)
 #
 # Please specify if you would like to run the Installation 
 # Verification Tool by setting the value to "true" or "false."
 # *******************************************
 
 -W installIVTAppSequenceBean.active="true"
 
 # ***********************************************************
 # **         Support for Silent Coexistence
 # **
 # ** NOTE: You must uncomment and modify the properties in
 # ** this section for silent coexistence to work properly.
 # **
 # ***********************************************************
 
 # ***********************************************************
 # Tell the installer that you want to perform coexistence
 # ***********************************************************
 
 #-W coexistenceOptionsBean.doCoexistence="true"
 
 # ***********************************************************
 # Set this property if you want to modify the default IHS
 # and IHS Admin ports
 # ***********************************************************
 
 #-W coexistencePanelBean.useIhs="true"
 
 # ***********************************************************
 # The new value for the Bootstrap Port
 # ***********************************************************
 
 #-W coexistencePanelBean.bootstrapPort="2810"
 
 # ***********************************************************
 # The new values for the IHS and IHS Admin ports
 # NOTE: These values are only used if 
 # coexistencePanelBean.useIhs is set to "true"
 # ***********************************************************
 
 #-W coexistencePanelBean.ihsPort="81"
 #-W coexistencePanelBean.ihsAdminPort="8009"
 
 # ***********************************************************
 # The new values for the HTTP and HTTPs transports.
 # ***********************************************************
 
 #-W coexistencePanelBean.httpTransportPort="9086"
 #-W coexistencePanelBean.httpsTransportPort="9044"
 
 # ***********************************************************
 # Thew new values for the admin console an secure admin
 # console ports.
 # ***********************************************************
 
 #-W coexistencePanelBean.adminConsolePort="9091"
 #-W coexistencePanelBean.secureAdminConsolePort="9444"
 
 # ***********************************************************
 # The new values for the csivServerAuthListener and
 # the csivMultiAuthListener ports.
 # NOTE: You can usually leave these set to 0
 # ***********************************************************
 
 #-W coexistencePanelBean.csivServerAuthListenerAddr="0"
 #-W coexistencePanelBean.csivMultiAuthListenerAddr="0"
 
 # ***********************************************************
 # The new value for the sasSSLServerAuth port.
 # ***********************************************************
 
 #-W coexistencePanelBean.sasSSLServerAuthAddr="0"
 
 # ***********************************************************
 # The new values for the JMS Server Direct Address,
 # JMS Server Security, and JMS Server QueuedAddress ports
 # ***********************************************************
 
 #-W coexistencePanelBean.jmsServerDirectAddress="5569"
 #-W coexistencePanelBean.jmsServerSecurityPort="5567"
 #-W coexistencePanelBean.jmsServerQueuedAddress="5568"
 
 # ***********************************************************
 # The new value for the soap connector address port
 # ***********************************************************
 
 #-W coexistencePanelBean.soapConnectorAddress="8881"
 
 # ***********************************************************
 # The new value for the DRS Client Address port
 # ***********************************************************
 
 #-W coexistencePanelBean.drsClientAddress="7874"
 
 
 # ***********************************************************
 # **         Support for Silent Migration
 # **
 # ** NOTE: You must uncomment and modify EVERY property
 # ** in this section for silent migration to work properly.
 # **
 # ***********************************************************
 
 # ***********************************************************
 # The installer must be informed that you wish to operate on 
 # a previous version, so  tell it that one is present 
 # by uncommenting the next line.
 # ***********************************************************
 
 # -W previousVersionDetectedBean.previousVersionDetected="true"
 
 # ***********************************************************
 # Direct the installer to operate on a specific previous version by
 # uncommenting the next line and entering one of these values...
 # 
 #  Value              Edition
 #  *****              *******
 #  AE                 WAS Advanced Edition (V3.x, V4.0.x)
 #  advanced           AE
 #  AEs                WAS Advanced Single Server Edition (V4.0.x)
 #  standard           WAS Standard Edition (V3.x)
 # ************************************************************           
 
 # -W previousVersionPanelBean.selectedVersionEdition="AEs"
 
 # ************************************************************
 # Specify the location where the previous version is installed.
 # ************************************************************
 
 # -W previousVersionPanelBean.selectedVersionInstallLocation="/opt/WebSphere/AppServer"
 
 # ************************************************************
 # Specify the path to the configuration file for the
 # previous version.  Configuration filenames are...
 #
 # Value            previousVersionPanelBean.selectedVersionEdition 
 # *****            ***********************************************
 # admin.config     AE
 # admin.config     advanced
 # server-cfg       AEs
 # server-cfg       standard
 # ************************************************************
 
 # -W previousVersionPanelBean.selectedVersionConfigFile="/opt/WebSphere/AppServer/config/server-cfg.xml"
 
 # ************************************************************
 # Specify the version number of the previous version: 4.0 4.0.1 3.5 etc...
 # ************************************************************
 
 # -W previousVersionPanelBean.previousVersionSelected="4.0"
 
 # ************************************************************
 # Uncomment the below line to indicate that you wish to 
 # migrate the previous version.
 # ************************************************************
 
 # -W previousVersionPanelBean.migrationSelected="true"
 
 # ************************************************************
 # Specify the directory where migration will backup 
 # information about the previous version.
 # ************************************************************
 
 # -W migrationInformationPanelBean.migrationBackupDir="/tmp/migrationbackup"
 
 # ************************************************************
 # Specify the directory where migration logs will be stored.
 # ************************************************************
 
 # -W migrationInformationPanelBean.migrationLogfileDir="/tmp/migrationlogs"
 

---