com.tivoli.pd.jcfg.SvrSslCfg utility for TAM SSO

Network Deployment (Distributed operating systems), v8.0 > Reference > Command-line utilities

com.tivoli.pd.jcfg.SvrSslCfg utility for TAM SSO

The utility is used to configure and remove the configuration information associated with WAS and the Tivoli Access Manager server.
Run the svrsslcfg script first on the dmgr and then on the other nodes in the cell.
java com.tivoli.pd.jcfg.SvrSslCfg
-action {config | unconfig} -admin_id admin_user_ID
-admin_pwd admin_password -appsvr_id application_server_name
-appsvr_pwd application_server_password -mode{local|remote}
-host host_name_of_application_server
-policysvr policy_server_name  port:rank [,...]
-authzsvr authorization_server_name 
 port:rank [,...]
-cfg_file fully_qualified_name_of_configuration_file
-domain Tivoli_Acccess_Manager_domain
-key_file fully_qualified_name_of_keystore_file
-cfg_action {create|replace}
Parameters

-action {config | unconfig}

Specifies the configuration action that is performed by the script. The following options apply:

-action config

Configure a server creates user and server information in the user registry and creates local configuration and key store files on the application server. Use the -action unconfig option to reverse this operation.
If this action is specified, the following options are required: -admin_id, -admin_pwd, -appsvr_id, -port, -mode, -policysvr, -authzsvr, and -key_file.

-action unconfig

Reconfigures an application server to complete the following actions:

Remove the user and server information from the user registry
Delete the local key store file
Remove information for this application from the configuration file without deleting the file

The reconfiguration operation fails only if the caller is unauthorized or the policy server cannot be contacted.
This action can succeed when a configuration file does not exist. When the configuration file does not exist, it is created and used as a temporary file to hold configuration information during the operation, and then the file is deleted completely.
If this action is specified, the following options are required: -admin_id, -admin_pwd, -appsvr_id, and -policysvr.

-admin_id admin_user_ID

Specifies the Tivoli Access Manager administrator name. If this option is not specified, sec_master is the default.
A valid administrative ID is an alphanumeric, case-sensitive string. String values are expected to be characters that are part of the local code set. We cannot use a space in the administrative ID.
For example, for U.S. English the valid characters are the letters a-Z, the numbers 0-9, a period (.), an underscore (_), a plus sign (+), a hyphen (-), an at sign (@), an ampersand (&), and an asterisk (*). The minimum and maximum lengths of the administrative ID, if there are limits, are imposed by the underlying registry.

-admin_password admin_password

Password of the Tivoli Access Manager administrator user that is associated with the -admin_id parameter. The password restrictions depend upon the password policy for your Tivoli Access Manager configuration.

-appsvr_id application_server_name

Name of the application server. The name is combined with the host name to create unique names for Tivoli Access Manager objects created for the application. The following names are reserved for Tivoli Access Manager applications: ivacld, secmgrd, ivnet, and ivweb.

-appsvr_pwd application_server_password

Password of the application server. This option is required. A password is created by the system and the configuration file is updated with the password created by the system.
If this option is not specified, the server password will be read from standard input.

-authzsvr authorization_server_name

Tivoli Access Manager authorization server with which the application server communicates. The server is specified by fully qualified host name, the SSL port number, and the rank. The default SSL port number is 7136. For example: myauth.mycompany.com:7136:1. We can specify multiple servers if the entries are separated by a comma (,).

-cfg_action {create | replace}

Action to take when creating the configuration and key files. Valid values are create or replace. Use the create option to initially create the configuration and keystore files. Use the replace option if these files already exist. If you use the create option and the configuration or keystore files already exist, an exception is created.
Options are as follows:

create

Specifies to create the configuration and key store files during server configuration. Configuration fails if either of these files already exists.

replace

Specifies to replace the configuration and key store files during server configuration. Configuration deletes any existing files and replaces them with new ones.

-cfg_file fully_qualified_name_of_configuration_file

Configuration file path and name.
A file name should be an absolute file name (fully qualified file name) to be valid.

-domain Tivoli_Access_Manager_domain

Specifies the Tivoli Access Manager domain name to which the administrator is authenticated. This domain must exist and an the administrator ID and password must be valid for this domain. The application server is specified in this domain.
If not specified, the local domain that was specified during Tivoli Access Manager runtime configuration will be used. The local domain value will be retrieved from the configuration file.
A valid domain name is an alphanumeric, case-sensitive string. String values are expected to be characters that are part of the local code set. We cannot use a space in the domain name.
For example, for U.S. English the valid characters for domain names are the letters a-Z, the numbers 0-9, a period ( . ), an underscore (_), a plus sign (+), a hyphen (-), an at sign (@), an ampersand (&), and an asterisk (*). The minimum and maximum lengths of the domain name, if there are limits, are imposed by the underlying registry.

-host host_name_of_application_server

Specifies the TCP host name used by the Tivoli Access Manager policy server to contact this server. This name is saved in the configuration file using the azn-app-host key.
The default is the local host name returned by the operating system. Valid values for host_name include any valid IP host name.
Examples:
host = libra
host = libra.dallas.ibm.com

-key_file fully_qualified_name_of_keystore_file

Directory that is to contain the key files for the server. A valid directory name is determined by the operating system. Use a fully qualified file name that contains the application server certificate and key file.
Make sure that server user (for example, ivmgr) or all users have permission to access the .kdb file and the folder that contains the .kdb file.
This option is required.

-mode server_mode

Mode in which the application operates. This value must be either local or remote.

-policysvr policy_server_name

Name of the policy server.

Comments

After the successful configuration of a Tivoli Access Manager Java application server, SvrSslCfg creates a user account and server entries representing the Java application server in the Tivoli Access Manager user registry. In addition, SvrSslCfg creates a configuration file and a Java key store file, which securely stores a client certificate, locally on the application server. This client certificate permits callers to make authenticated use of Tivoli Access Manager services. Conversely, reconfiguration removes the user and server entries from the user registry and cleans up the local configuration and keystore files.
The contents of an existing configuration file can be modified by using the SvrSslCfg utility. The configuration file and the key store file must already exist when calling SvrSslCfg with all options other than -action config or -action unconfig.
The following options are parsed and processed into the configuration file, but are otherwise ignored in this version of Tivoli Access Manager:
The host name is used to build a unique name (identity) for the application. The pdadmin user list command displays the application identity name in the following format:
server_name
host_name Note that the pdadmin server list command displays the server name in a slightly different format:
server_name
host_name

Example

CLASSPATH=${WAS_HOME}/java/jre/lib/ext/PD.jar:${WAS_CLASSPATH}
java \
-cp ${CLASSPATH} \
-Dpd.cfg.home= ${WAS_HOME}/java/jre \
-Dfile.encoding=ISO8859-1 \
-Dws.output.encoding=CP1047 \
-Xnoargsconversion \
com.tivoli.pd.jcfg.SvrSslCfg \
-action config \
-admin_id sec_master \
-admin_pwd $TAM_PASSWORD \
-appsvr_id $APPSVR_ID \
-policysvr ${TAM_HOST}:7135:1 \
-port 7135 \
-authzsvr ${TAM_HOST}:7136:1 \
-mode remote \
-cfg_file ${CFG_FILE} \
-key_file ${KEY_FILE} \
-cfg_action create

Configure single sign-on capability with Tivoli Access Manager or WebSEAL

+
Search Tips | Advanced Search