+

Search Tips   |   Advanced Search

AppManagementCommands


Use the Jython or Jacl scripting languages to manage applications with wsadmin. Use the commands and parameters in the AppManagementCommands group can be used to display and process SQL-Java (SQLJ) profiles or pureQuery bind files.

The AppManagementCommands includes the following commands:

 

listSqljProfiles

Parses the .ear file of the specified application and returns a list of .ser files found.

SQLJ profiles have a .ser filename extension. If there are any files in the .ear file that are not SQLJ profiles, but have a .ser filename extension, those files may be listed also.

Parameters and return values...

-appName

The name of the installed application. Your application must be installed prior to running customization and binding on it. Required.

Batch mode example usage:

Interactive mode example usage:

Output appears with syntax specific to the local operating system. The list of available profiles can be added to a group file .grp directly.

 

processSqljProfiles

Create a DB2 customization of the SQLJ profiles.

The command optionally, by default, calls the SQLJ profile binder to bind the DB2 packages.

Best practice: If processing a large enterprise application, or we are processing many SQLJ profiles, the process might take longer than the default timeout for wsadmin. The default connection timeout for wsadmin is set to three minutes. If the default timeout is reached and you lose the connection to the server, the wsadmin console issues a timeout statement. We can check the system output log for the final results of the customization and bind process and the amount of time for that the process.

Do not execute the processSqljProfiles command again until the previous command has completed, or the results may be unpredictable. To prevent this disconnection, configure the session timeout to a longer period of time. See the system output log for the total processing time, and use that time period as a basis for the new timeout value. To extend the default timeout value, change the wsadmin properties file that corresponds to the connection type that you are using:

There are two ways we can verify whether the binding or customization took place:

Target object...

The installed application SQLJ profiles. These profiles are either single, serial .ser files or profiles grouped in a .grp group file. This target object is required.

Parameters and return values...

-appName

The name of the installed application. Your application must be installed prior to running customization and binding on it. Required.

-classpath

The path that tells the appserver where to find the necessary SQLJ driver .jar files. This parameter is optional.

-dburl

The location of the DB2 server on the network. This parameter is optional.

-user

User name of the account performing the access to the DB2 database.

This parameter is optional.

-password

Password for the account accessing the DB2 database. This parameter is optional.

-options

Additional options that are used with the db2sqljcustomize command may be inserted under the -options parameter except for the parameters listed above. This parameter is optional. For additional information about the db2sqljcustomize command, consult db2sqljcustomize - SQLJ profile customizer.

-profiles

The location of the SQLJ profiles .ser files or .grp file. This parameter is required.

Examples

Batch mode example usage:

Interactive mode example usage:

wsadmin>print AdminTask.processSqljProfiles('-interactive') Process serialized SQLJ profiles. Process the serialized SQLJ profiles in an installed application. Customize the profiles with run time information and bind static SQL packages in a database. Refer to the Database SQLJ customize and bind documentation. Do only bind processing. (bindOnly): false *Application name. (appName): Application Classpath to SQLJ tools. (classpath):

C:/IBM/SQLLIB/java/db2jcc.jar Database connection URL. (dbURL): Database connection user name. (user): Database connection password. (password): Options for SQLJ tools. (options): *SQLJ profile names. (profiles): c:\\temp\\ApplicationSerNames.grp

Process serialized SQLJ profiles. F (Finish) C (Cancel) Select [F, C]: [F] WASX7278I: Generated command line:

AdminTask.processSqljProfiles('[-bindOnly false -appName Application -classpath [C:/IBM/SQLLIB/java/db2jcc.jar] -profiles [c:\\temp\\ApplicationSerNames.grp ]]')

 

listPureQueryBindFiles

Parse the .ear file of the specified application and returns a list of .bindprops and .pdqxml files found. PureQuery bind options files have a .bindprops filename extension. Bind files have a .pdqxml filename extension. If .ear file contains files that are not pureQuery bind files but have a .bindprops or a .pdqxml filename extension, those files may also be listed.

Parameters and return values

-appName

The name of the installed application. Required.

Examples

Batch mode example usage:

Interactive mode example usage:

Output appears with syntax specific to the local operating system.

 

processPureQueryBindFiles

Invoke the DB2 pureQuery bind utility on a list of pureQuery bind files.

If processing a large enterprise application, or we are processing many pureQuery bind files using wsadmin, the process might take longer than the default timeout for the wsadmin tool. The default connection timeout for wsadmin is set to three minutes. If the default timeout is reached and the process running on the server has not yet completed, the wsadmin console issues a timeout statement.

We can check the system output log on the server for the final results of the bind process and the time when that process completed. Do not execute the processPureQueryBindFiles command again until the previous command has completed, or the results may be unpredictable. To prevent this timeout, configure the wsadmin request timeout to a longer period of time. After a successful customization and binding process, use the system output log to estimate the total processing time. Use this time period as a basis for the new timeout value. To extend the default timeout value, change the wsadmin properties file that corresponds to the connection type that we are using:

bprac

To verify whether the binding took place, view the System Out log to determine if the bind processing was successful.

Parameters and return values

-appName

The name of an installed application that contains the pureQuery bind files to be processed. Your application must be installed prior to running binding on it.

-classpath

A list of the paths to the JAR files that contain the pureQuery bind utility and its dependencies: pdq.jar, pdqmgmt.jar, db2jcc4.jar or db2jcc.jar, db2jcc_license_cisuz.jar or db2jcc_license_cu.jar. Use / or \\\\ as a file separator. Use a blank space to separate the paths for the JAR files.

-dburl

The URL for connecting to the database. The format is jdbc:db2: //server_name:port/database_name.

-user

User name of the account performing the access to the DB2 database.

-password

Password for the account accessing the DB2 database.

-options

Any additional options that are needed by the pureQuery bind utility.

Provide bind options as -bindoptions "bind_options_string".

For additional information about the pureQuery bind utility, consult the topic on the pureQuery Bind utility.

-files

A list of the names of the pureQuery bind files to be processed. The bind file path names must be relative to the application .ear file that contains them. Use / or \\\\ as a file separator. If we specify multiple profile paths, use a blank space to separate them.

Batch mode example usage:

  • Jacl...

    $AdminTask processPureQueryBindFiles { \ -appName MyApp \ -classpath {/pdq_home/pdq.jar /pdq_home/pdqmgmt.jar /db2_home/SQLLIB/java/db2jcc4.jar /db2_home/SQLLIB/java/db2jcc_license_cu.jar } \ -url jdbc:db2: //hostname:50000/databasename \ -user dbuser1 \ -password dbpswrd1 \ -options {-bindoptions "BLOCKING NO"} \ -files {META-INF/abc.bindprops META-INF/abc.bindprops }}
  • Jython...

    print AdminTask.processPureQueryBindFiles('[ \ -appName MyApp \ -classpath [/pdq_home/pdq.jar /pdq_home/pdqmgmt.jar /db2_home/SQLLIB/java/db2jcc4.jar /db2_home/SQLLIB/java/db2jcc_license_cu.jar ] \ -url jdbc:db2: //hostname:50000/databasename \ -user dbuser1 \ -password dbpswrd1 \ -options [-bindoptions "BLOCKING NO"] \ -files [META-INF/abc.bindprops META-INF/abc.bindprops ]]')

Interactive mode example usage:

print AdminTask.processPureQueryBindFiles('-interactive') Process pureQuery bind files.

Process the pureQuery bind files in an installed application. Bind static SQL packages in a database. Refer to IBM pureQuery

Bind utility documentation. *Application name. (appName): MyApp Classpath to pureQuery Bind utility. (classpath): /pdq_home/pdq.jar /pdq_home/pdqmgmt.jar /db2_home/SQLLIB/java/db2jcc4.jar /db2_home/SQLLIB/java/db2jcc_license_cu.jar *Database connection URL. (url): jdbc:db2: //hostname:50000/databasename Database connection user name. (user): dbuser1 Database connection password. (password): dbpswrd1 Options for the pureQuery Bind utility. (options): -bindoptions "BLOCKING NO" *pureQuery bind file names. (files): META-INF/abc.bindprops META-INF/abc.bindprops Process pureQuery bind files. F (Finish) C (Cancel) Select [F,

C]: [F] WASX7278I: Generated command line: AdminTask.processPureQueryBindFiles('[-appName MyApp -classpath [/pdq_home/pdq.jar /pdq_home/pdqmgmt.jar /db2_home/SQLLIB/java/db2jcc4.jar /db2_home/SQLLIB/java/db2jcc_license_cu.jar ] -url jdbc:db2: //hostname:50000/databasename -user dbuser1 -password ***** -options [-bindoptions "BLOCKING NO"] -files [META-INF/abc.bindprops META-INF/abc.bindprops ]]')




 

Related concepts

Change the console session expiration

 

Related tasks

Use AdminTask for scripted administration
Customize profiles for Structured Query Language in Java (SQLJ) applications
Task overview: Data Studio pureQuery
Administer applications using scripting

 

Related


Commands for AdminTask
Wsadmin tool

 

Related information

pureQuery Bind utility