CTGDIC001I
Delete selected items?
Explanation:
This is an informational message only.
CTGDIC002E
Cannot load a Connector with configuration type: class.
Explanation:
An internal error has occurred.
Operator response:
Contact IBM support.
CTGDIC003W
Delete table table name?
Explanation:
The delete operation will delete the delta table and commit the change. The operation is permanent and there is no possible rollback of this transaction.
Operator response:
Confirm if the delta table is to be deleted and proceed with the operation.
CTGDIC004I
Table table name deleted.
Explanation:
This is an informational message only.
CTGDIC005I
Server says it supports the Paged Search control.
Explanation:
This is an informational message only.
CTGDIC006W
Unable to determine whether the LDAP Server supports paged searches. Verify the LDAP Server supports paged searches.
Explanation:
The Server did not give any response around the ability to support paged searches. Paged searches may or may not be be supported.
Operator response:
Verify whether the LDAP server supports Paged Search control before using Paged Search.
CTGDIC007W
Unable to perform paged search. This LDAP server does not support paged search.
Explanation:
The LDAP Server does not support paged search.
Operator response:
Paged search cannot be used.
CTGDIC008W
Unable to lookup changelog information. The LDAP server does not provide server information.
Explanation:
The LDAP Server does not provide server information, therefore it is not possible to query the server for the changelog base.
Operator response:
Use another method to find the changelog base.
CTGDIC009W
Unable to lookup changelog information. The Context attribute ''firstchangenumber'' does not exist on the LDAP Server.
Explanation:
The Context attribute ''firstchangenumber'' does not exist on the LDAP Server.
Operator response:
Check the LDAP Server configuration.
CTGDIC010I
The First Change number is set to first number.
The Last Change number is set to last number.
Explanation:
This is an informational message only.
CTGDIC011W
Unable to retrieve Changelog base name. The ''changelog'' attribute does not exist in the LDAP server info entry.
Explanation:
The ''changelog'' attribute of this LDAP server does not exist.
Operator response:
Use another method to find the Changelog base name.
CTGDIC012I
LDAP Server changelog base name: 'changelog'.
Explanation:
This is an informational message only.
CTGDIC013W
Delete table table name?
Explanation:
The delete operation will delete the named table and commit the change. The operation is permanent and there is no possible rollback of this transaction.
Operator response:
Confirm if the table is to be deleted and proceed with the operation.
CTGDIC014W
Unable to query schema until the Connector is configured.
Explanation:
The Connector has not been configured. The schema cannot be queried.
Operator response:
Configure the Connector before querying the schema.
CTGDIC015W
Unable to lookup change number information. The LDAP server does not provide server information.
Explanation:
The LDAP Server does not provide server information, therefore it is not possible to lookup the first/last change number.
Operator response:
Use another method to find the first/last change number.
CTGDIC016E
Enter the WSDL URL first.
Explanation:
In order to retrieve the services from a WSDL file, the location to such should be specified.
Operator response:
Enter a valid WSDL file location in the WSDL URL field.
CTGDIC017E
No services were found in the specified WSDL file.
Explanation:
The WSDL file specified in the WSDL URL parameter contains no services.
Operator response:
Check the WSDL file. If it does not contain any services then it is an invalid WSDL file.
CTGDIC018E
Enter a service name first.
Explanation:
Each endpoint/operation is associated with a service. In order to see all endpoints/operations enter a service first.
Operator response:
Enter a service name first. We can use the service button to discover all services in the WSDL file.
CTGDIC019E
No endpoints were found in the specified WSDL file.
Explanation:
The WSDL file specified in the WSDL URL parameter contains no endpoints.
Operator response:
Check that the WSDL file is a valid one.
CTGDIC020E
No operations were found in the specified WSDL file.
Explanation:
The WSDL file specified in the WSDL URL parameter contains no operations.
Operator response:
Check that the WSDL file is a valid one.
CTGDIC022E
The attribute 'attribute name' is already mapped.
Explanation:
The specified attribute is already mapped and cannot be mapped a second time.
Operator response:
Select an alternate attribue to map in the attribute map.
CTGDIC023E
Exception encountered while creating component of type 'component type': 'error message'.
Explanation:
See message.
Operator response:
Review the error message and exception to find further details on the error.
CTGDIC024W
Unable to update component. The referenced component no longer exists: file name.
Explanation:
The component could not be updated because it no longer exists.
Operator response:
Review the exception to find further details on the warning.
CTGDIC025E
Exception encountered while updating an external component.
Explanation:
The component could not be updated because an error was encountered.
Operator response:
Review the exception to find further details on the error.
CTGDIC026E
The remote Config Config file cannot be found on server server name.
Explanation:
The configuration instance specified in the Config parameter of AssemblyLine Function Component could not be found on the remote server.
Operator response:
The operator should check if the specified config parameter exists on the remote server.
CTGDIC027E
Connection to server server name cannot be obtained.
Explanation:
The remote server instance specified in the AssemblyLine Function component's server parameter may not be currently active.
Operator response:
The operator should make sure that the specified server instance [hostname:port] combination is active on the remote server and then try to establish a connection again.
CTGDIC028E
No server configured.
Explanation:
The Server configuration parameter is required for the query configuration operation to work.
Operator response:
The Operator should enter a valid remote IBM TDI server information [hostname:port] in the AssemblyLine function component's server parameter fields and then perform the query configuration operation.
CTGDIC029I
The application will not function properly without the IBM TDI install directory. Specify the IBM TDI install directory.
Explanation:
This is an informational message only.
CTGDIC030E
Installation directory specified is not valid. A local IBM TDI installation is required for the application to run.
Explanation:
See message.
Operator response:
Specify a valid local IBM TDI installation directory so the application can run properly.
CTGDIC031E
Exception encountered while loading the Config file:
'file name'
.
Explanation:
The application was unable to load the specified Config file.
Operator response:
Review the exception to find further details on the error.
CTGDIC032W
Exception encountered while loading the Config file:
'file name'
.
Explanation:
The application was unable to load the specified Config file.
Operator response:
Review the exception to find further details on the error.
CTGDIC033E
Unable to load Config file. Cannot determine folder for referenced Config file:
'file name'
.
Explanation:
The application was unable to load the specified Config file because the folder where the Config file is located could not be found.
Operator response:
Check the file system where the Config file should be located and ensure it exists.
CTGDIC034E
Unable to save file because an exception was encountered.
Explanation:
See message.
Operator response:
Review the exception to find further details on the error.
CTGDIC035E
Unable to load BaseEditor because there is no quick-edit object.
Explanation:
An internal error has occurred.
Operator response:
Contact IBM support.
CTGDIC036E
Exception occurred while downloading properties.
Explanation:
See message.
Operator response:
Review the exception to find further details on the error.
CTGDIC037I
Update completed succesfully.
Explanation:
This is an informational message only.
CTGDIC038E
Exception occurred while upload properties.
Explanation:
See message.
Operator response:
Review the exception to find further details on the error.
CTGDIC039I
The connector did not return any schema information.
Do we want to open the connection and read one entry?
Explanation:
This is an informational message only.
CTGDIC040I
Do we want to clear the current schema before updating?
Explanation:
This is an informational message only.
CTGDIC041I
Do we want to clear the current schema before updating?
Explanation:
This is an informational message only.
CTGDIC043I
The Component returned an empty entry.
Explanation:
This is an informational message only.
CTGDIC044I
No schema information returned. Would we like to read an entry?
Explanation:
This is an informational message only.
CTGDIC045I
Solution directory updated.
Explanation:
This is an informational message only.
CTGDIC046E
The folder already exists: 'folder name'.
Explanation:
A folder with that name already exists.
Operator response:
Choose a unique name and try again.
CTGDIC047E
Attribute already assigned to attribute 'attribute name'.
Explanation:
This attribute name has already been used for another attribute.
Operator response:
Use another attribute name that is not already used.
CTGDIC048E
Error: 'error message'
Explanation:
See message.
Operator response:
Review the exception to find further details on the error.
CTGDIC049E
Exception encountered while opening the configuration file: 'error message'
Explanation:
See message.
Operator response:
Review the exception to find further details on the error.
CTGDIC050E
Uanble to open the configuration file. An exception occurred: 'error message'
Explanation:
See message.
Operator response:
Review the exception to find further details on the error.
CTGDIC051I
Solution directory created.
Explanation:
This is an informational message only.
CTGDIC052I
Unable to build configuration file. An exception occurred: 'error message'
Explanation:
See message.
Operator response:
Review the attached Exception to find further details on the error.
CTGDIC053I
Unable to create folder 'name'. An exception occurred: 'error message'
Explanation:
See message.
Operator response:
Review the attached exception to find further details on the error.
CTGDIC054E
Target folder 'folder name' is not a folder.
Explanation:
The name specified is not a folder. The problem occurred while trying to build a configuration file.
Operator response:
Check the configuration file.
CTGDIC055E
Unable to remove object from configuration file. An exception occurred: 'error message
Explanation:
The problem occured while trying to remove an object from the configuration file.
Operator response:
Check the configuration file.
CTGDIC056E
Cannot determine folder for object 'object name'.
Explanation:
While trying the build the configuration file, the object mentioned was not recognized and could not be placed in any folder.
Operator response:
Check the object and the configuration file.
CTGDIC057W
Cannot find cached configuration for file 'file name'.
Explanation:
While trying the build the configuration file, the named object did not have a cached copy.
Operator response:
Check the object and the configuration file. The named object was probably deleted. Add the object back to the configuration as needed.
CTGDIC058W
Using cached version of file 'file name'.
Explanation:
While trying the build the configuration file, the file containing the named object was not found and a cached copy was used instead.
Operator response:
The named object was probably deleted. Add the object back to the configuration as needed.
CTGDIC059E
An unsupported action was encountered. We can only open configuration files that exist in your workspace.
Explanation:
Only IBM TDI configuration files that exists in your workspace can be opened. Using File/Open to open files outside the workspace is not supported.
Operator response:
Use the File/Import command to import the files into our workspace project.
CTGDIC060E
Cannot create the specified directory: 'directory name'.
Explanation:
The named directory could not be created.
Operator response:
Verify that the file name is correct. Verify that the file system permissions allow the file to be written.
CTGDIC061E
The specified solution directory 'name' is a file.
Explanation:
The solution directory is a file.
Operator response:
Remove existing file, rename the file, or use another name for the solution directory.
CTGDIC062E
Created the file 'file name'.
Explanation:
This is an informational message only.
CTGDIC063I
Do we want to stop the local server running on 'server address'?
Explanation:
This is an informational message only.
CTGDIC064I
The server is being started...
Explanation:
This is an informational message only.
CTGDIC065I
This will clear the current object(s) and restore the value to the inherited one.
Explanation:
This is an informational message only.
CTGDIC066I
When the Skip Lookup option is selected, no 'Before/After Lookup' and 'On Multiple Entries' hooks are invoked. Also, no add is done in Update mode if an entry is not found to match the criteria.
Explanation:
Make sure that the solution takes into account these restrictions.
Operator response:
No response needed.
CTGDIC067I
The Schema item 'schema name' already exists.
Explanation:
This is an informational message only.
CTGDIC068I
The file has been changed on the file system. Do we want to reload the editor?
Explanation:
This is an informational message only.
CTGDIC069I
Referenced component no longer exists: 'file name'.
Explanation:
This is an informational message only.
CTGDIC070I
Unknown class encountered. Unable to reattach to the class 'class name'.
Explanation:
This is an informational message only.
CTGDIC071I
The parent is not a container.
Explanation:
This is an informational message only.
CTGDIC072I
Th Server Mode Connector 'Connector name' appears after another Server Mode Connector.
Explanation:
This is an informational message only.
CTGDIC073I
The Connector 'Connector name' references unknown property 'property name'.
Explanation:
This is an informational message only.
CTGDIC074I
The Connector 'Connector name' references unknown string 'string value' which is not defined in the schema.
Explanation:
This is an informational message only.
CTGDIC075I
The attribute map 'attribute map name' references undefined/unavailable work attribute 'attribute name'.
Explanation:
This is an informational message only.
CTGDIC076I
Local development server launched ...
Explanation:
This is an informational message only.
CTGDIC077I
Process exit code: 'exit code'.
Explanation:
This is an informational message only.
CTGDIC078I
The Connector 'Connector name' references the object 'object name'.
Explanation:
This is an informational message only.
CTGDIC079I
We have not updated the solution directory and not doing so may affect your connection to this server Do we want to update the solution.properties before saving?
Explanation:
This is an informational message only.
CTGDIC080I
Resource already exists. Do you wish to overwrite?
Overwrite: 'File name'
Last modified: 'Last modified'
Explanation:
This is an informational message only.
CTGDIC081I
Cannot find a form to display for object class Object Class
Explanation:
This is an informational message only.
CTGDIC082I
The file .rs.xml cannot be imported, please export the project and then import that file.
Explanation:
The file .rs.xml in every project is special, and cannot be directly imported into another project. Instead, the whole project should be exported, and the resulting file can be imported.
Operator response:
Export the project in question, then import the exported file.
CTGDIC083I
A restart of the IBM TDI server is required to activate changes made to the system store of a running IBM TDI server.
Explanation:
The IBM TDI server cannot change its system store configuration while running. A restart of the server is required to active changes.
Operator response:
Stop the server and then start it again.
CTGDIC084I
IBM TDI
Version: 7.1
This plug-in is provided by IBM Corp. Your use of this plug-in is governed by the license
that was agreed to when the plug-in was installed as part of a feature installation.
Licensed Materials - Property of IBM Corp. Copyright IBM Corp. and other(s), 2002, 2010.
All Rights Reserved.
Explanation:
This is an informational message only.
CTGDIC085I
Do we want to restore the file from the runtime configuration of the project?
Explanation:
The Configuration Editor maintains a copy of each project file in a runtime configuration. When you save a component to disk it is also copied to the runtime configuration.
Operator response:
Answer yes to recreate the file with the copy from the runtime configuration.
CTGDIC086W
A Property can only be exposed once.
Explanation:
This message is displayed when an attempt is made to expose a property more than once.
Operator response:
No action is required.
CTGDIC087W
An item with that name already exists.
Explanation:
Items must have unique names.
Operator response:
Choose another name.
CTGDIC088W
Error while renaming to 'new name'.
Explanation:
The component could not be renamed because an error was encountered.
Operator response:
Consider the attached error message, and choose another name.
CTGDIC089W
You must configure sandbox settings before running the AssemblyLine in Record or Playback mode.
Explanation:
The AssemblyLine must have a database name specified in order to record or playback an AssemblyLine.
Operator response:
Use the Sandbox Settings and configure a database name.
CTGDIC090W
This Attribute Map item contains an expression. If it is changed, it must be changed to javascript code.
Explanation:
This Attribute Map item is of the deprecated type expression. There is no editor to change an expression. Using the javascript editor on this item will cause it to be changed to type javascript.
Operator response:
Answer OK to go ahead with the change.
CTGDIC091W
The proxy AssemblyLine was successfully updated.
Explanation:
The proxy AssemblyLine was updated with the changes from the simulation settings of the current AssemblyLine.
Operator response:
CTGDIC092E
The ikeyman.exe file not found. Searched in folders path1 and path2.
Explanation:
The IBM Key Management could not be started, because the executable could not be found.
Operator response:
Verify the ikeyman.exe file exists.
CTGDIC093E
No // found in ''url''. Hostname cannot be determined.
Explanation:
The URL prefix is parsed to determine the hostname and port. There should be a // in front of the hostname.
Operator response:
Input a correct URL prefix.
CTGDIC094I
Delete selected items? There will be no undo.
Explanation:
This is an informational message only.
CTGDIC095W
Component ''name'' automatically moved to the DataFlow section.
Explanation:
The named component had the wrong mode for being in the Feed section, and was automatically moved to the DataFlow section.
Operator response:
If necessary, change the mode and move the Connector to the Feed section.
CTGDIC096W
The AssemblyLine is still running on the server. Do we want to stop it?
Explanation:
When you close a run window we have the option of leaving the assemblyline running or stop it. We can also stop or reopen the assemblyline from the Servers view.
Operator response:
Choose yes or no as appropriate.
CTGDIC097W
Could not locate name while resolving dependencies.
Explanation:
When you import a configuration file, all the resources that are needed are also imported into the project. This message indicates that one such resource could not be found, it may have been deleted from the configuration file.
Operator response:
Verify that this does not cause a problem.
CTGDIC098I
Connection to DataBase Successful.
Explanation:
This is an informational message only.
CTGDIC099W
Connection to DataBase Failed.
Explanation:
This is an informational message only.
CTGDIC100I
The branch 'Branch name' has no preceeding IF/ELSEIF component.
Explanation:
This is an informational message only.
CTGDIC101I
The case 'Case name' is not inside a Switch component.
Explanation:
This is an informational message only.
CTGDIC102I
The attribute map for 'Connector name' is empty (auto-mapping is either off in the AssemblyLine or the connector is not part of an AssemblyLine).
Explanation:
This is an informational message only.
CTGDIC103I
Do we want to replace the reference to 'Property name' with the value 'Value name'?
Explanation:
This is an informational message only.
CTGDIC104I
The system store configuration has no value for parameter: {0}
Explanation:
The configuration for the system store is incomplete. Open the system store configuration screen and fill in the missing parameter.
Operator response:
CTGDIC105E
The specified namespace is already defined
Explanation:
There can only be one definition for a namespace.
Operator response:
Either delete the existing definition for the namespace, or choose another name for the namespace.
CTGDIC106I
Run option on Server name
Explanation:
This is an informational message only.
CTGDIC107W
An Operation with that name already exists.
Explanation:
There can only be one operation with a given name.
Operator response:
Choose another name.
CTGDIC108E
The system encountered an internal error while trying to validate a product license. Message: message.
Explanation:
An internal error is preventing validation of the product license.
Operator response:
Contact IBM support.
CTGDIC109E
The system cannot find an enrolled product license.
Explanation:
An enrolled product license could not be found.
Operator response:
In order to use TDI, we need to ensure that a valid license is enrolled. If you experience any problems with licensing, we should contact your IBM representative or authorized dealer for assistance.
CTGDIC110E
The evaluation period has expired.
Explanation:
The evaluation period for this copy of TDI has now expired.
Operator response:
This copy of TDI is licensed for use for a limited period only. This copy of TDI has now exceeded the licensed period and will no longer execute. We can purchase a full license for unlimited use of the product by contacting your IBM representative or authorized dealer.
CTGDIC111W
There are number of days days left in the evaluation period.
Explanation:
The evaluation period for this copy of TDI has the specified number of days to run until expiry.
Operator response:
This copy of TDI is licensed for use for a limited period only. This copy of TDI will continue to execute for the specified number of days, but will then expire and not execute in the future. We can purchase a full license for unlimited use of the product by contacting your IBM representative or authorized dealer.
CTGDIC112E
The evaluation period is invalid.
Explanation:
The evaluation period for this copy of TDI is invalid.
Operator response:
This copy of TDI is licensed for use for a limited period only. This copy of TDI appears to have more than the maximum allowed number of days (90) remaining in the evaluation period.
CTGDIC113E
No help page found for topic ''topic''.
Explanation:
There was an error while trying to display the help for the selected topic.
Operator response:
Search the TDI documentation on the IBM website for help on the selected topic.
CTGDIC114E
Parameter 'parameter name' is required.
Explanation:
The named parameter must be given a value.
Operator response:
Specify a value for the parameter.
CTGDIC115E
There are number missing values.
Explanation:
Several parameters have not been given a value.
Operator response:
Specify a value for all parameters that require a value.
CTGDIC116W
AssemblyLine terminated - showing last 10 log messages (use view log file to view entire log)
Explanation:
The AssemblyLine was terminated and logging of messages is suspended until the log has been drained. Only the last ten lines are shown but we can use the View log button to view all log lines from the AssemblyLine.
Operator response:
Specify a value for all parameters that require a value.
CTGDIC117W
Software Update is disabled in this product.
Explanation:
Software update is not supported in this product. To use this product with other Eclipse plugins you should install TDI in a separate Eclipse installation.
Operator response:
Install this product in a different Eclipse installation for use with other plugins.
CTGDIC118E
An error occurred while retrieving the CDM version.
Explanation:
The used CDM meta-data source is not available. Depending on the used source either the idmlcert.jar is missing, or the CDM meta-data of the IT registry has been corrupted.
Operator response:
Try changing the meta-data source to the alternative (either the JAR file or an IT registry system). If the problem persists, verify the location of the JAR file (/jars/3rdparty/IBM/cdm/idmlcert.jar) and the integrity of the meta-data in the remote IT registry system.
CTGDIC119E
Failed to connect to the IT registry database (parameters: it_registry_credentials). The thrown exception is: exception.
Explanation:
A connection could not be established with the IT registry database.
Operator response:
Verify that the IT registry is running and the used credentials are correct.
CTGDIC120I
Successfully connected to the IT registry database (parameters: it_registry_credentials).
Explanation:
This is an informational message only.
CTGDIC121I
No types were found.
Explanation:
This is an informational message only.
CTGDIC122I
Common Data Model version is 'cdm'.
Explanation:
This is an informational message only.
CTGDIC123E
AssemblyLine failed: string
Explanation:
The assemblyline failed while running or stepping through it.
Operator response:
Check the log in the console view for more information about the error.
CTGDIC124I
AssemblyLine Completed
- number record(s) read
- number record(s) written
- number error(s)
string
Explanation:
This is an informational message only.
CTGDIC126I
number record(s) record(s) found.
Explanation:
This is an informational message only.
CTGDIC127I
No MSS were found.
Explanation:
This is an informational message only.
CTGDIC128I
The Component has reached the end of the data source.
Explanation:
This is an informational message only.
CTGDIC129I
Input value:
- string
Output value:
string
Explanation:
This is an informational message only.
CTGDIC130I
AssemblyLine Completed
- number record(s) read
- number record(s) added
-
- number record(s) modified
- number record(s) unchanged
-
- number error(s)
string
Explanation:
This is an informational message only.
CTGDIC131I
An error occurred while initializing component [name].
Explanation:
This is an informational message only.
CTGDIC132I
An error occurred in component [name].
Explanation:
This is an informational message only.
CTGDIC133I
An error occurred while executing AssemblyLine Hook name.
Explanation:
This is an informational message only.