The value supplied for the ''<insert_0>'' command line property is outside the range of valid numerical values for this property. The range is from <insert_1> to <insert_2>.
Severity
20 : Error
Explanation
The value supplied for the specified command line property is outside the specified range of acceptable values. As a result, the command cannot be issued.
Response
Refer to the command line help or to the product documentation to determine a valid value for the parameter that is within the specified range. Reissue the command using this value.
BFGCU0002E
The value supplied for the ''<insert_0>'' command line property is not a valid numerical value.
Severity
20 : Error
Explanation
The value supplied for the specified command line property is not a valid numerical value. As a result, the command cannot be issued.
Response
Reissue the command with a numerical value for the specified property.
BFGCU0003W
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' properties file is outside the range of valid numerical values for this property. The range is <insert_2> - <insert_3>.
Severity
10 : Warning
Explanation
The value supplied for the property in the specified properties file is outside the specified range of acceptable values. The value will be ignored.
Response
Refer to the product documentation to determine a vaild value for the parameter. Update the specified properties file to correct the value of the specified property.
BFGCU0004W
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' properties file is not a valid numerical value.
Severity
10 : Warning
Explanation
The value supplied for the specified property in the specified properties file is not a valid numerical value. As a result, the property will be ignored.
Response
Refer to the product documentation to determine a vaild value for the parameter. Update the specified properties file to correct the value of the specified property.
BFGCU0005E
The value supplied for the ''<insert_0>'' command line property is too long. The maximum length for this property is 48 characters.
Severity
20 : Error
Explanation
The value supplied for the specified property is longer than 48 characters. The maximum length permitted for values of this property is 48 characters. As a result, the command cannot be completed.
Response
Reissue the command with a value for the specified property that is no greater than 48 characters in length.
BFGCU0006E
The value supplied for the ''<insert_0>'' command line property contains characters that are not permitted in an IBM MQ object name.
Severity
20 : Error
Explanation
The value supplied for the specified property contains characters that are not permitted in an IBM MQ object name. As a result, the command cannot be completed.
Response
Refer to the IBM MQ product documentation to determine the rules for naming IBM MQ objects. Reissue the command with a value for the specified property that conforms to IBM MQ object naming rules.
BFGCU0007W
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' property file is too long. The maximum length for this property value is 48 characters.
Severity
10 : Warning
Explanation
The value supplied for the specified property in the specified properties file is longer than 48 characters. The maximum length permitted for values of this property is 48 characters. As a result, the property will be ignored.
Response
Correct the value of the specified property in the specified properties file.
BFGCU0008W
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' property file contains characters that are not permitted in an IBM MQ object name.
Severity
10 : Warning
Explanation
The value supplied for the specified property in the specified properties file contains characters that are not permitted in an IBM MQ object name. As a result, the property will be ignored.
Response
Refer to the IBM MQ product documentation to determine the rules for naming IBM MQ objects. Correct the value of the specified property in the specified properties file.
BFGCU0010E
The properties file <insert_0> could not be read due to: <insert_1>.
Severity
20 : Error
Explanation
The specified properties file could not be read for the specified reason. As a result, the current command could not be completed.
Response
Use the information present in the message to identify why the specified properties file could not be read. If possible correct the problem, otherwise contact the IBM support center for further assistance.
BFGCU0011E
An internal error has occurred. The ''<insert_0>'' properties file does not contain a ''<insert_1>'' property.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0012E
An internal error has occurred. The product data directory value ''<insert_0>'' could not be resolved due to: <insert_1>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0013E
An internal error has occurred. The product data directory ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0014W
The properties file <insert_0> could not be read due to: <insert_1>.
Severity
10 : Warning
Explanation
The specified properties file could not be read for the specified reason. As a result, the current command could not be completed.
Response
Use the information present in the message to identify why the specified properties file could not be read. If possible correct the problem, otherwise contact the IBM support center for further assistance.
BFGCU0015E
An internal error has occurred. The ''<insert_0>'' properties file does not contain a ''<insert_1>'' property.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0016E
An internal error has occurred. The ''<insert_0>'' directory does not exist in <insert_1>, or does not contain a required properties file.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0017E
An internal error has occurred. The ''<insert_0>'' properties file does not exist in <insert_1>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0018E
The configuration options directory ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
The specified configuration options directory does not exist. The command cannot be completed.
Response
Verify that the configuration options directory specified is correct. Reissue the command with a corrected configuration options parameter. If this does not resolve the problem, contact the IBM support center for further assistance.
BFGCU0019E
An internal error has occurred. The properties file ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0020E
The properties file <insert_0> could not be read due to: <insert_1>.
Severity
20 : Error
Explanation
The specified properties file could not be read for the specified reason. As a result, the current command could not be completed.
Response
Use the information present in the message to identify why the specified properties file could not be read. If possible correct the problem, otherwise contact the IBM support center for further assistance.
BFGCU0021E
An internal error has occurred. Unable to complete the command because the agent directory ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0022E
An internal error has occurred. Unable to complete the command because the agent directory ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0023E
The value ''<insert_0>'' is not valid for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a known valid option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGCU0024E
The value ''<insert_0>'' is not valid for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a known valid option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGCU0025E
An internal error has occurred. The property is <insert_0>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0026E
The Java Runtime Environment (Version: <insert_0>) is not compatible. Run with Version: <insert_1> or higher.
Severity
20 : Error
Explanation
The agent requires Java Runtime Environment {1} or higher.
Response
Upgrade the system Java Runtime Environment.
BFGCU0027E
The value supplied for the ''<insert_0>'' command line property is in a format that has not been recognized.
Severity
20 : Error
Explanation
The value supplied for the specified property is in a format that has not been recognized. As a result, the command cannot be completed.
Response
Reissue the command with a value for the specified property that conforms to the following standard: yyyy-MM-ddThh:mm or hh:mm.
BFGCU0028E
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' property file is in a format that has not been recognized.
Severity
20 : Error
Explanation
The value supplied for the specified property is in a format that has not been recognized. As a result, the command cannot be completed.
Response
Reissue the command with a value for the specified property that conforms to the following standard: yyyy-MM-ddThh:mm or hh:mm.
BFGCU0030E
The trigger parameter ''<insert_0>'' has an unknown condition value.
Severity
20 : Error
Explanation
The condition part of the trigger parameter of the transfer request is not recognized and therefore the fteCreateTransfer command cannot be completed.
Response
Review the help options for the trigger parameter and update the condition part of the trigger parameter as necessary. Refer to the fteCreateTransfer command documentation if we need further clarification.
BFGCU0031E
The trigger parameter ''<insert_0>'' has an unknown condition value.
Severity
20 : Error
Explanation
The condition part of the trigger parameter of the transfer request is not recognized and therefore the fteCreateTransfer command cannot be completed.
Response
Review the help options for the trigger parameter and update the condition part of the trigger parameter as necessary. Refer to the fteCreateTransfer command documentation if we need further clarification.
BFGCU0032E
The trigger parameter ''<insert_0>'' has an unknown condition value.
Severity
20 : Error
Explanation
The condition part of the trigger parameter of the transfer request is not recognized and therefore the fteCreateTransfer command cannot be completed.
Response
Review the help options for the trigger parameter and update the condition part of the trigger parameter as necessary. Refer to the fteCreateTransfer command documentation if we need further clarification.
BFGCU0033E
The trigger parameter ''<insert_0>'' has an unknown condition value.
Severity
20 : Error
Explanation
The condition part of the trigger parameter of the transfer request is not recognized and therefore the fteCreateTransfer command cannot be completed.
Response
Review the help options for the trigger parameter and update the condition part of the trigger parameter as necessary. Refer to the fteCreateTransfer command documentation if we need further clarification.
BFGCU0034E
The trigger parameter ''<insert_0>'' has an unknown condition value.
Severity
20 : Error
Explanation
The condition part of the trigger parameter of the transfer request is not recognized and therefore the fteCreateTransfer command cannot be completed.
Response
Review the help options for the trigger parameter and update the condition part of the trigger parameter as necessary. Refer to the fteCreateTransfer command documentation if we need further clarification.
BFGCU0035E
The trigger parameter ''<insert_0>'' has an unknown condition value.
Severity
20 : Error
Explanation
The value supplied as the qualifier for the trigger parameter is invalid for the check value of the filesize option. As a result, the command cannot be completed.
Response
Review the help options for the trigger parameter and update the condition part of the trigger parameter as necessary. Refer to the fteCreateTransfer command documentation if we need further clarification.
BFGCU0036E
The trigger parameter ''<insert_0>'' has an incorrectly-formatted list of file specifications.
Severity
20 : Error
Explanation
The list of file specifications supplied to the trigger parameter is incorrectly formatted and it is not clear what the file names are. As a result, the command cannot be completed.
Response
Reissue the command with a list of file specifications formed of either a single file name or multiple file names each separated by a single comma.
BFGCU0037E
The trigger parameter ''<insert_0>'' has an incorrectly-formatted list of file specifications.
Severity
20 : Error
Explanation
The list of file specifications supplied to the trigger parameter is incorrectly formatted and it is not clear what the file names are. As a result, the command cannot be completed
Response
Reissue the command with a list of file specifications formed of either a single file name or multiple file names each separated by a single comma.
BFGCU0038E
The trigger parameter ''<insert_0>'' is incorrectly formatted.
Severity
20 : Error
Explanation
The trigger parameter does not conform to any of the correct formats.
Response
Use the command help option to review possible options and then reissue the command.
BFGCU0039E
An internal error has occurred. Trigger parameter ''<insert_0>'' is incorrectly formatted. The subdivided elements were <insert_1>
Severity
20 : Error
Explanation
CMSG001
Response
CMSG002
BFGCU0040E
The trigger parameter ''<insert_0>'' is not a supported condition when monitoring a <insert_1> resource.
Severity
20 : Error
Explanation
The trigger parameter must conform to one of the formats supported by the resource being monitored.
Response
Consult the command line help to review the available options and then reissue the command.
BFGCU0041E
The trigger parameter ''<insert_0>'' is not valid as it does not match the required format for any of the conditions supported by the command.
Severity
20 : Error
Explanation
The trigger parameter must conform to one of the formats supported by the command.
Response
Consult the command line help to review the available options and then reissue the command.
BFGCU0042E
The value ''<insert_0>'' is not valid for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a known valid option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGCU0043E
The value ''<insert_0>'' is not valid for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a known valid option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGCU0044E
The value ''<insert_0>'' is not a valid locale for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a known valid locale option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGCU0045E
The value ''<insert_0>'' is not a valid timezone for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a known valid timezone option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGCU0046E
The value ''<insert_0>'' is not a valid file encoding for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a known valid file encoding option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGCU0047E
An internal error has occurred. Missing long name required for property key in <insert_0>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGCU0048E
The value ''<insert_0>'' is not a valid port reference for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The given value was not a valid port reference which should be an integer in the range of 0 and 65534.
Response
Review the possible options from the usage information, then correct the argument and resubmit the command.
BFGCU0049E
The destination queue parameter ''<insert_0>'' is incorrectly formatted.
Severity
20 : Error
Explanation
The destination queue parameter is not in the correct format.
Response
Ensure the destination queue parameter is specified either as QUEUE or QUEUE@QUEUEMANAGER and in both cases conforms to valid IBM MQ object names.
BFGCU0050E
The value of ''<insert_0>'' for the size by which to split messages is not valid.
Severity
20 : Error
Explanation
The size by which to split messages must be specified in a supported format.
Response
Review the possible options from the usage information, then correct the message splitting size value.
BFGCU0051E
The value of ''<insert_0>'' for the delimiter by which to split binary messages is not valid.
Severity
20 : Error
Explanation
The delimiter by which to split binary messages must be specified in a supported format.
Response
Review the possible options from the usage information, then correct the binary delimiter value.
BFGCU0052E
The regular expression given as a value for the ''-<insert_0>'' property is not specified in a valid syntax (<insert_1>).
Severity
20 : Error
Explanation
The command line value must be formatted as a valid regular expression.
Response
Correct the argument value and submit the request again.
BFGCU0053E
The value specified using the ''-<insert_0>'' parameter is not valid. The value must be either ''32'' or ''64''.
Severity
20 : Error
Explanation
The value specified is not valid for the parameter given in the error message. The value must be either '32' or '64'.
Response
Correct the value and submit the request again.
BFGCU0054E
The value of ''<insert_0>'' for the delimiter to split binary records with is not valid.
Severity
20 : Error
Explanation
We must specify the delimiter to split binary records with in a supported format.
Response
Review the possible options from the usage information, then correct the binary delimiter value.
BFGCU0055E
The value specified using the ''<insert_0>'' parameter is not valid. The value must be either ''one-phase'' or ''two-phase''.
Severity
20 : Error
Explanation
The value specified is not valid for the parameter given in the error message. The value must be either 'one-phase' or 'two-phase'.
Response
Correct the value and submit the request again.
BFGCU0056E
The value ''<insert_0>'' is not valid of the argument ''<insert_1>''. The reason is: <insert_2>
Severity
20 : Error
Explanation
The value will be used as a property, but is not a valid value for a property of that type.
Response
Correct the value and submit the request again.
BFGCU9999E
<insert_0>
Severity
20 : Error
Explanation
If this message does not give enough information, check the accompanying error messages for further information.
Response
For further information on resolving this error, see the problem determination information on the product Web site.