Security manager codes (X'C8')

If a security manager reason code occurs that is not listed here, an internal error has occurred. Collect the following diagnostic items and contact the IBM support center.

Diagnostics

A description of the actions that led to the error or, if applicable, either a listing of the application program or the input string to a utility program that was being run at the time of the error.
The console output for the period leading up to the error.
The queue manager job log.
The system dump resulting from the error.
If we are using CICS, the CICS transaction dump output.
Appropriate IBM MQ, z/OS, Db2, CICS, and IMS service levels.
If we are using the IBM MQ Operations and Control panels, the ISPF panel name.
The security command issued before the error.

00C80001

An attempt to obtain storage for the security manager was unsuccessful.

Note: This could indicate a system-wide storage problem.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the return code from the storage failure.

System programmer response

Check that we are running with the recommended region size, and if not, reset the system and restart the queue manager. If this is not the cause of the problem, use these items to diagnose the cause of the problem:

Queue manager job log
Information about any other storage-related problems
System dump resulting from the error

00C80002

An attempt to obtain storage for the security manager was unsuccessful.

Note: This error code could indicate a system-wide storage problem.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the return code from the storage failure.

System programmer response

Check that we are running with the suggested region size, and if not, reset the system and restart the queue manager. If this is not the cause of the problem, use these items to diagnose the cause of the problem:

Queue manager job log
Information about any other storage-related problems
System dump resulting from the error

00C80003

An attempt to obtain a storage subpool for the security manager was unsuccessful.

Note: This error code could indicate a system-wide storage problem.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the return code from the storage failure.

System programmer response

Check that we are running with an appropriate region size, and if not, reset the system and restart the queue manager. If the region size is not the cause of the problem, use these items to diagnose the cause of the problem:

Queue manager job log
Information about any other storage-related problems
System dump resulting from the error

00C80004

An internal error has occurred.

System action

The queue manager is terminated, and a dump is produced.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C8000A: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the external security manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C8000B: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the external security manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C8000C: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the external security manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C8000D

An unexpected return code has been received from one of the following SAF calls to the external security manager (ESM) during security switch processing at queue manager initialization time:

RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=LIST
RACROUTE REQUEST=STAT

System action

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System programmer response

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact your IBM support center.

00C8000E: An unexpected setting for the subsystem security switch was encountered.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.
System programmer response: Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

00C8000F

An internal error has occurred.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class involved at the time of the error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C80010: An attempt to obtain storage for the security manager was unsuccessful.
Note: This error code could indicate a system-wide storage problem.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.
System programmer response: Check that we are running with the suggested region size, and if not, reset the system and restart the queue manager. If this is not the cause of the problem, use the items listed in Diagnostics, together with information about any other storage-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80011: An attempt to obtain a storage subpool for the security manager was unsuccessful.
Note: This error code could indicate a system-wide storage problem.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.
System programmer response: Check that we are running with the suggested region size, and if not, reset the system and restart the queue manager. If this is not the cause of the problem, use the items listed in Diagnostics, together with information about any other storage-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80012: An attempt to obtain storage for the security manager was unsuccessful.
Note: This error code could indicate a system-wide storage problem.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.
System programmer response: Check that we are running with the suggested region size, and if not, reset the system and restart the queue manager. If this is not the cause of the problem, use the items listed in Diagnostics, together with information about any other storage-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80013: An internal error has occurred while processing a security request.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

00C80020: An attempt to obtain storage for the security manager was unsuccessful.
Note: This error code could indicate a system-wide storage problem.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.
System programmer response: Check that we are running with the suggested region size, and if not, reset the system and restart the queue manager. If this is not the cause of the problem, use the items listed in Diagnostics, together with information about any other storage-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80024: An internal error has occurred while processing a command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

00C80025: An internal error has occurred while processing a command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

00C80026: An internal error has occurred while processing a command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

00C80027: An unrecognized keyword was encountered whilst processing a REFRESH SECURITY command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the keyword causing the problem.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

00C80028: An attempt to obtain a storage subpool for the security manager was unsuccessful. This might have occurred during the processing of an ALTER SECURITY command, a REFRESH SECURITY command, or during the automatic security timeout processing.
Note: This could indicate a system-wide storage problem.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.
System programmer response: Use the items listed in Diagnostics, together with information about any other storage-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80029: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the external security manager (ESM) during security switch processing for a REFRESH SECURITY command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80031: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the external security manager (ESM) during the processing for a REFRESH SECURITY command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80032

An unexpected return code has been received from one of the following SAF calls to the external security manager (ESM) during the processing of a REFRESH SECURITY command:

RACROUTE REQUEST=LIST (create)
RACROUTE REQUEST=LIST (delete)
RACROUTE REQUEST=STAT

System action

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the return codes from SAF, and the ESM.

Note: If the error occurred on a STAT call, the error is preceded by a CSQH004I message containing the return codes from SAF, and the ESM.

System programmer response

See your ESM documentation for information about the return codes from SAF and the ESM. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80033: An unexpected setting for the subsystem security switch was encountered during the processing of a REFRESH SECURITY command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced.
System programmer response: Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

00C80034: An internal error has occurred.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class invoked at the time of the check.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

00C80035: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the external security manager (ESM) during security switch processing for a REFRESH SECURITY command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80036: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the external security manager (ESM) during security switch processing for a REFRESH SECURITY command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80037: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the external security manager (ESM) during the processing for a REFRESH SECURITY command.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80038

An unexpected return code has been received from one of the following SAF calls to the external security manager (ESM) during the processing of a REFRESH SECURITY command.

RACROUTE REQUEST=LIST (create)
RACROUTE REQUEST=LIST (delete)
RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=STAT

System action

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the return codes from SAF, and the ESM.

Note: If the error occurred on a STAT call, the error is preceded by a CSQH004I message containing the return codes from SAF, and the ESM.

System programmer response

00C80039: An attempt to obtain a storage subpool for a security manager user entry block was unsuccessful. This could have occurred during either security timeout processing, or REFRESH SECURITY command processing.
Note: This could indicate a system-wide storage problem.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.
System programmer response: Use the items listed in Diagnostics, together with information about any other storage-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80040: A severe error has occurred during security timeout processing. An unexpected return code has been received from the IBM MQ timer component.
Note: This could indicate a system-wide problem with the timer component, or the system timer.
System action: Messages CSQH009I and CSQH010I are issued. The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the timer component that caused the problem.
System programmer response: Use the items listed in Diagnostics, together with information about any other timer-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80041: A severe error has occurred during security timeout processing for an ALTER SECURITY command. An unexpected return code has been received from the IBM MQ timer component.
Note: This could indicate a system-wide problem with the timer component, or the system timer.
System action: Message CSQH010I is issued. The current execution unit terminates with a completion code of X'5C6' and a dump is produced. Register 2 contains the return code from the timer component that caused the problem.
System programmer response: Use the items listed in Diagnostics, together with information about any other timer-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80042: A severe error has occurred during security initialization when trying to start the security timer. An unexpected return code has been received from the IBM MQ timer component.
Note: This could indicate a system-wide problem with the timer component, or the system timer.
System action: Message CSQH010I is issued. The queue manager terminates and a dump is produced. Register 2 contains the return code from the timer component that caused the problem.
System programmer response: Use the items listed in Diagnostics, together with information about any other timer-related problems, to diagnose the cause of the problem. If we are unable to resolve the problem, contact the IBM support center.

00C80043: A severe error has occurred whilst processing a DISPLAY SECURITY command. A parameter has been entered on the SECURITY keyword, but this is invalid.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

00C80044: A severe error has occurred whilst processing an ALTER SECURITY command. A parameter has been entered on the SECURITY keyword, but this is invalid.
System action: The current execution unit terminates with a completion code of X'5C6', and a dump is produced.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

00C80045: A severe error has occurred because the last security refresh did not complete successfully.
System action: The current execution unit terminates with error reason code X'5C6', and a dump is produced.
System programmer response: If we are able to fix the cause of the problem, we must refresh the security again before you can continue. If we are unable to solve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80046

An attempt to obtain a storage subpool for the security manager Utoken blocks was unsuccessful.

This indicates that there could be a wider ranging problem relating to storage availability.

System action

The queue manager is terminated and a dump is produced.

System programmer response

Use the items listed in Diagnostics, together with information about any other storage-related problems, to diagnose the cause of the problem.

00C80047

An attempt to obtain a storage block for a security manager Utoken block was unsuccessful.

This indicates that there could be a wider ranging problem relating to storage availability.

System action

The current execution unit terminates with X'5C6' and a dump is produced.

System programmer response

Use the items listed in Diagnostics, together with information about any other storage-related problems, to diagnose the cause of the problem. Contact the IBM support center if we need help.

00C80050: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80051: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80052: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80053

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=LIST
RACROUTE REQUEST=STAT

System action

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System programmer response

00C80054

An unexpected setting for the subsystem security switch was encountered.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System programmer response

Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80055

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C80060: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80061: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80062: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80063

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=LIST
RACROUTE REQUEST=STAT

System action

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System programmer response

00C80064

An unexpected setting for the subsystem security switch was encountered.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System programmer response

Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80065

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C80070: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80071: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80072: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80073

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=LIST
RACROUTE REQUEST=STAT

System action

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System programmer response

00C80074: An unexpected setting for the subsystem security switch was encountered.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.
System programmer response: Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

00C80075

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C80080: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80081: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80082: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80083

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=LIST
RACROUTE REQUEST=STAT

System action

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System programmer response

00C80084: An unexpected setting for the subsystem security switch was encountered.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.
System programmer response: Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

00C80090: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80091: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80092: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80093

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=LIST
RACROUTE REQUEST=STAT

System action

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System programmer response

00C80094

An unexpected setting for the subsystem security switch was encountered.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System programmer response

Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80095

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C80100: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80101: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80102: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80103

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=LIST
RACROUTE REQUEST=STAT

System action

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System programmer response

00C80104

An unexpected setting for the subsystem security switch was encountered.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System programmer response

Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80105

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C80200: A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80201: A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. For information about setting IBM MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80202: A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.
System action: The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.
System programmer response: See your ESM documentation for information about any return codes that appear in the job log. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact the IBM support center.

00C80203

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

RACROUTE REQUEST=EXTRACT
RACROUTE REQUEST=LIST
RACROUTE REQUEST=STAT

System action

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System programmer response

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. For information about setting MQ security switches, see Switch profiles. If we are unable to resolve the problem, collect the items listed in Diagnostics and contact your IBM support center.

00C80204

An unexpected setting for the subsystem security switch was encountered.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System programmer response

Collect the items listed in Diagnostics, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80205

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System action

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C80206

An unexpected setting for the request type was encountered on an authentication request.

System action

The current execution unit terminates with a completion code of X'5C6' and a dump is produced. Register 2 contains the request type in error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C80207

An unexpected setting for the request type was encountered on an authentication request.

System action

The queue manager terminates and a dump is produced. Register 2 contains the request type in error.

System programmer response

Collect the items listed in Diagnostics and contact the IBM support center.

Restart the queue manager.

00C81000: A severe error has occurred while processing a REFRESH SECURITY command.
System action: The current execution unit terminates with error reason code X'5C6', and a dump is produced. Register 2 contains the address of the control block involved in the error.
System programmer response: Collect the items listed in Diagnostics and contact the IBM support center.

Parent topic: IBM MQ for z/OS codes