The configuration for IBM MQ Managed File Transfer can not be determined. The following exception was reported when enquiring of IBM MQ Managed File Transfer, <insert_0>
Severity
20 : Error
Explanation
The configuration for the IBM MQ Managed File Transfer agents could not be found at the location given. This has prevented the command from completing.
Response
Check that any previous command that might have changed the configuration has completed correctly.
BFGUB0005E
Internal error: The required property file "<insert_0>" is missing. The command cannot successfully complete.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0006E
The attempt to property read file "<insert_0>" failed with exception "<insert_1>"
Severity
20 : Error
Explanation
While loading the IBM MQ Managed File Transfer configuration, an attempt to read the named file has failed. The command cannot complete.
Response
Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
BFGUB0007E
Internal error: The required the dataDirectory property could not be located when configuring MQMFT Version 7.0.4.1 and earlier. The "com.ibm.wmqfte.product.root" system property may be missing or the wmqfte.properties file it is referencing is missing.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0008E
Internal error: The property type "<insert_0>" is not supported for method "<insert_1>".
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0009E
The following required property file is missing: "<insert_0>"
Severity
20 : Error
Explanation
The named property file is required but is missing. This file contains the necessary configuration for the command to complete.
Response
Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
BFGUB0010E
Internal error: The configuration has not been initialized before first use.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0012E
Property "<insert_0>" was expected to be in numeric format, but the property is not present in the configuration and does not have a default value.
Severity
20 : Error
Explanation
The named numeric property is missing from the property file but the property is required for the current configuration. The command cannot successfully complete.
Response
Review the properties in the associated property file and add the missing property to the file. Alternatively, remove redundant properties from the file which might inadvertently have required this missing property.
BFGUB0013E
Internal error: Attempt to execute method "<insert_0>" when not executing in unit test mode.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0014E
Internal error: Attempting to modify property "<insert_0>" of a non-cloned configuration property.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0015E
The property file "<insert_0>" is missing.
Severity
20 : Error
Explanation
The named property is missing and the command might not complete successfully.
Response
Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
BFGUB0016E
The property file "<insert_0>" had the following exception during reading "<insert_1>"
Severity
20 : Error
Explanation
IBM MQ Managed File Transfer attempted to read the name property file but failed with the given exception.
Response
Check that the name given is present and IBM MQ Managed File Transfer has permission to read the file.
BFGUB0017E
Internal error: Duplicate attempt to initialise the configuration properties.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0018E
Internal error: Attempt to execute method "<insert_0>" when not executing in unit test mode.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0019E
The property file "<insert_0>" is missing.
Severity
20 : Error
Explanation
The required property file is not present in the configuration.
Response
Check that any previous command that might have changed the configuration has completed correctly.
BFGUB0020E
The property file "<insert_0>" had the following exception while reading "<insert_1>"
Severity
20 : Error
Explanation
IBM MQ Managed File Transfer attempted to read the named property file but failed with the given exception.
Response
Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
BFGUB0021E
The required property name "<insert_0>" is not present in the property set.
Severity
20 : Error
Explanation
The given property name is required for the command to complete successfully, but the propery cannot be located in any of the associated property files.
Response
Check that any previous command that might have changed the configuration has completed correctly.
BFGUB0022E
The property name "<insert_0>" has an invalid numeric value of "<insert_1>"
Severity
20 : Error
Explanation
The named property must be a numeric value for the command to successfully complete.
Response
Review the associated property file and change the property so that is has a valid numeric value.
BFGUB0023E
The property name "<insert_0>" has a value of "<insert_1>", which is not in the range between "<insert_2>" and "<insert_3>"
Severity
20 : Error
Explanation
The named numeric property is present in the configuration, but has a value that is outside the valid range.
Response
Review the associated property file and change the value to one that is in the given ranges.
BFGUB0024E
The property name "<insert_0>" has an invalid boolean value of "<insert_1>"
Severity
20 : Error
Explanation
The named property has only two options and the one assigned is not a valid option.
Response
Review the associated property file and change the property to have a value of true or false, yes or no, or on or off.
BFGUB0025E
Internal error: Cloning as non matching original of "<insert_0>" when "<insert_1>" was expected.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0026E
Internal error: Cloning as non matching original of "<insert_0>" when "<insert_1>" was expected.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0027E
Internal error: Attempting to modify property "<insert_0>" of a non-cloned configuration property.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0028E
An attempt to write property file ''<insert_0>'' into directory ''<insert_1>'' failed as the directory path is not present.
Severity
20 : Error
Explanation
The named property file could not be written to the given directory as the directory path is not present or this command does not have permission to write to that directory.
Response
Check that the property name exists and that IBM MQ Managed File Transfer has permission to write the file.
BFGUB0029E
The property file "<insert_0>" had the following exception while reading "<insert_1>"
Severity
20 : Error
Explanation
The attempt to read the properties in the named file has failed and the command cannot successfully complete.
Response
Check that the file name exists and that IBM MQ Managed File Transfer has permission to read the file.
BFGUB0030E
Internal error : Attempt to generate configuration root failed with exception "<insert_0>"
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0031E
Internal error: Attempt to generate configuration root for unsupported structure type: "<insert_0>"
Severity
20 : Error
Explanation
CMSG00001
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0032E
Attempt to update the properties in ''<insert_0>'' failed as the file is not present or accessible.
Severity
20 : Error
Explanation
CMSG00001
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0033E
Attempt to update properties in ''<insert_0>'' failed to exception: <insert_1>
Severity
20 : Error
Explanation
CMSG00001
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0034E
Property ''<insert_0>'' was expected to be in numeric format, but it is not present in the configuration and does not have a default value.
Severity
20 : Error
Explanation
The named property is missing and the command might not complete successfully.
Response
Check that the named property exists and that IBM MQ Managed File Transfer has permission to read the file.
BFGUB0035E
The following required property file is missing: ''<insert_0>''
Severity
20 : Error
Explanation
The named property file is missing but is required for successful completion of the command.
Response
Check that any previous command that might have changed the configuration has completed correctly.
BFGUB0036E
Internal error: The property name ''<insert_0>'' has an invalid boolean value of ''<insert_1>''
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0037E
Internal error: The property name ''<insert_0>'' has an invalid boolean value of ''<insert_1>''
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0038E
Internal error: The property name ''<insert_0>'' has an invalid or missing string value
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0039E
A required property of ''<insert_0>'' is missing from the properties.
Severity
20 : Error
Explanation
The named property is required for this command to complete successfully.
Response
Review the associated property file and either add this property or correct this property.
BFGUB0040E
Internal error: Property type ''<insert_0>'' requires a coordination value in method ''<insert_1>''.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0041I
The process is stopping because of errors previously reported in the properties.
Severity
0 : Information
Explanation
The process is stopping, it cannot run because of the previously reported errors.
Response
Review the previously reported errors.
BFGUB0042E
The properties and configuration tree cannot be located.
Severity
20 : Error
Explanation
IBM MQ Managed File Transfer is unable to locate any of its properties or its configuration in the expected location. This command cannot complete successfully.
Response
If there has been a recent installation, check the logs and ensure all associated components have been installed and configured. If the configuration has been manually changed recently, review those changes.
BFGUB0043W
The given property value for ''<insert_0>'' is not valid because it contains control characters. This usually occurs if the backslash character has not been escaped.
Severity
10 : Warning
Explanation
When inputting property values that contain a backslash character (for example, a Windows path name), these values must be escaped to ensure they are passed through as expected.
Response
Replace all occurrences of the backslash '\\' with a double-backslash '\\\\' in the referenced property value.
BFGUB0044E
Internal error: The required property file "<insert_0>" is missing. The command cannot successfully complete.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0045E
The attempt to property read file "<insert_0>" failed with exception "<insert_1>"
Severity
20 : Error
Explanation
While loading the IBM MQ Managed File Transfer configuration, an attempt to read the named file has failed. The command cannot complete.
Response
Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
BFGUB0046E
The property name "<insert_0>" has an invalid numeric value of "<insert_1>"
Severity
20 : Error
Explanation
The named property must be a valid numeric value for the command to successfully complete.
Response
Review the associated property file and change the property so that is has a valid numeric value.
BFGUB0047W
The property name "<insert_0>" in file "<insert_1>" is not a valid MQMFT property and will be ignored.
Severity
10 : Warning
Explanation
MQMFT does not support the specified property. The property will be ignored.
Response
Remove the specified property from the properties file.
BFGUB0048E
The attempt to create directory ''<insert_0>'' was not successful.
Severity
20 : Error
Explanation
The command could not complete successfully because the directory path specified could not be created.
Response
Check that the IBM MQ Managed File Transfer configuration structure has not been corrupted and that the command has permission to create the directory path.
BFGUB0049E
The attempt to create a ''<insert_0>'' property file in directory ''<insert_1>'' could not be completed because a property file already exists and the force overwrite parameter (-f) was not specified.
Severity
20 : Error
Explanation
The command could not complete successfully because the property file specified already exists in the named directory.
Response
Check the correct property file name has been specified and use the -f parameter to force an overwrite of the property file.
BFGUB0050E
The coordination ''<insert_0>'' cannot be located.
Severity
20 : Error
Explanation
The specified coordination name does not exist in the IBM MQ Managed File Transfer configuration structure. As a result, this command cannot complete successfully.
Response
Review the specified coordination name and correct as necessary.
BFGUB0051E
The agent ''<insert_0>'' cannot be located in the configuration directory structure.
Severity
20 : Error
Explanation
The agent name specified does not exist in the IBM MQ Managed File Transfer configuration directory structure. As a result, this command cannot complete successfully.
Response
Review the specified agent name and correct as necessary.
BFGUB0052E
The agent ''<insert_0>'' cannot be located in the logs directory structure.
Severity
20 : Error
Explanation
The agent name specified is not present in the IBM MQ Managed File Transfer configuration directory structure. As a result, this command cannot complete successfully.
Response
Review the logger name and correct as necessary.
BFGUB0053E
The logger ''<insert_0>'' cannot be located in the configuration directory structure.
Severity
20 : Error
Explanation
The logger name specified does not exist in the IBM MQ Managed File Transfer configuration directory structure. As a result, this command cannot complete successfully.
Response
Review the logger name and correct as necessary.
BFGUB0054E
The installation name ''<insert_0>'' is invalid and cannot be used in this command.
Severity
20 : Error
Explanation
The installation name specified is not valid and the command cannot complete successfully.
Response
Review the installation name and ensure that it is correct and that it matches the guidelines specified in the <**INFO CENTRE**>
BFGUB0055E
The queue manager name ''<insert_0>'' is invalid and cannot be used in this command.
Severity
20 : Error
Explanation
The queue manager name specified is not valid and the command cannot complete successfully.
Response
Review the queue manager name and ensure that it is correct and that it matches the guidelines specified in the <**INFO CENTRE**>
BFGUB0056E
The agent name ''<insert_0>'' is invalid and cannot be used in this command.
Severity
20 : Error
Explanation
The agent name specified is not valid and the command cannot complete successfully.
Response
Review the agent name and ensure that it is correct and that it matches the guidelines specified in the <**INFO CENTRE**>
BFGUB0057E
The logger name ''<insert_0>'' is invalid and cannot be used in this command.
Severity
20 : Error
Explanation
The logger name specified is not valid and the command cannot complete successfully.
Response
Review the logger name and ensure that it is correct and that it matches the guidelines specified in the <**INFO CENTRE**>
BFGUB0058E
The attempt to update the configuration failed because the coordination ''<insert_0>'' could not be located. The command will not complete successfully.
Severity
20 : Error
Explanation
The IBM MQ Managed File Transfer configuration could not be updated because the coordination specified does not exist in the configuration.
Response
Review the coordination name and review whether the IBM MQ Managed File Transfer configuration might have been corrupted.
BFGUB0059E
The attempt to update the configuration failed because the coordination property file ''<insert_0>'' could not be located. The command will not complete successfully.
Severity
20 : Error
Explanation
The IBM MQ Managed File Transfer configuration could not be updated because the coordination specified does not exist in the configuration.
Response
Review the coordination name and review whether the IBM MQ Managed File Transfer configuration might have been corrupted.
BFGUB0060W
The MQMFT property name "<insert_0>" is not valid in file "<insert_1>" and will be ignored.
Severity
10 : Warning
Explanation
MQMFT does not support the property being set in the specified file. The property will be ignored.
Response
Remove the property from the specified properties file. If necessary, set the property in the correct MQMFT properties file.
BFGUB0061E
Internal error: attempt to update properties to file when no original file based properties were loaded.
Severity
20 : Error
Explanation
CMSG001
Response
CMSG002
BFGUB0062E
The logger ''<insert_0>'' cannot be located in the logs.
Severity
20 : Error
Explanation
The given agent logger is not present in the IBM MQ Managed File Transfer configuration structure. As a result this command cannot complete successfully.
Response
Review the given logger name and correct as necessary.
BFGUB0063E
Attempt to delete agent <insert_0> cannot be completed until the agent has been stopped.
Severity
20 : Error
Explanation
To perform a delete agent a number of files must be removed. These files are current in use by the named agent and cannot be deleted until the agent has been stopped.
Response
Use the fteStopAgent command to stop the agent.
BFGUB0064E
Attempt to delete logger <insert_0> cannot be completed until the logger has been stopped.
Severity
20 : Error
Explanation
To perform a delete logger a number of files must be removed. These files are current in use by the named logger and cannot be deleted until the logger has been stopped.
Response
Use the fteStopLogger command to stop the logger.
BFGUB0065E
The property name "<insert_0>" has an invalid value of "<insert_1>". The valid values are "<insert_2>".
Severity
20 : Error
Explanation
The named property must be a valid value for the command to successfully complete.
Response
Review the associated property file and change the property so that is has a valid value.
BFGUB0066E
The coordination ''<insert_0>'' cannot be located.
Severity
20 : Error
Explanation
The specified coordination name does not exist in the IBM MQ Managed File Transfer configuration structure. As a result, this command cannot complete successfully.
Response
Review the specified coordination name and correct as necessary.
BFGUB0067E
The default coordination name is missing from the configuration.
Severity
20 : Error
Explanation
The command requires a coordination reference, however none was supplied in the command arguments and the default value is either missing or corrupt.
Response
Review any recent changes to the IBM MQ Managed File Transfer configuration and ensure all have completed successfully.
BFGUB0068E
User must be an IBM MQ Managed File Transfer administrator to run this command.
Severity
20 : Error
Explanation
The command could not successfully complete because the user requires IBM MQ Managed File Transfer administrator rights.
Response
User needs to be an IBM MQ Managed File Transfer administrator to execute this command.
BFGUB0069E
Internal error: Attempt to change permission on file <insert_0> to <insert_1> failed with exception <insert_2>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0070E
Internal error: Native library for platform <insert_0> (architecture <insert_1>) could not be loaded because <insert_3>. java.library.path is: <insert_2>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0071E
Internal error: Native library for platform <insert_0> (architecture <insert_1>) could not be loaded. java.library.path is: <insert_2>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0072E
The configuration directory of <insert_0> cannot be accessed therefore the command cannot be successfully completed.
Severity
20 : Error
Explanation
The root directory for configuration cannot be located. This command cannot complete successfully and no further configuration can be created.
Response
Check to see if the directory given is present and that this command has permission to access the directory. If the directory is missing then review the installation logs to ensure any previous installation completed successfully.
BFGUB0073E
An attempt to force replace property file <insert_0> in directory <insert_1> could not be completed as this user does not have permission to replace the existing file.
Severity
20 : Error
Explanation
This command was attempting to replace an existing property, but the user do not have sufficient permission to remove the existing property file and as a a result the command could not be completed successfully.
Response
Check the current ownership and permission setting of the property file to be replace and correct as necessary.
BFGUB0074E
Internal error: Request to validate a null coordination name.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0075E
The property set <insert_0> in directory <insert_1> is not present or we do not have read access to that coordination.
Severity
20 : Error
Explanation
A request to access a property set configuration has not been successful as the named property set is either not present in the configuration directory or the user does not have permission to read that configuration.
Response
Review the given property set name and correct as necessary or if correct check the file permissions of the coordination directory.
BFGUB0076E
The property set <insert_0> is missing or unable to read the coordination.properties file in directory <insert_1>.
Severity
20 : Error
Explanation
A request to access a property set configuration has not been successful. The named coordination directory is present, but the coordination.properties file is either missing or the user does not have sufficient access to read the file.
Response
Check that the coordination.properties file is present in the named directory. If it is not, then recover from a backup or regenerate using the fteSetupCoordination command. If the file is present, check that the user has at least read access to the file.
BFGUB0077E
The property set <insert_0> is missing or unable to read the command.properties file in directory <insert_1>.
Severity
20 : Error
Explanation
A request to access a property set configuration has not been successful. As the named coordination directory is present, but the command.properties file is either missing or the user does not have sufficient access to read the file.
Response
Check that the command.properties file is present in the named directory. If it is not, then recover from a backup or regenerate using the fteSetupCommand command. If the file is present, check that the user has at least read access to the file.
BFGUB0078W
The property name "<insert_0>" in file "<insert_1>" of "<insert_2>" is not a valid MQMFT property and will be ignored.
Severity
10 : Warning
Explanation
MQMFT does not support the specified property. The property will be ignored.
Response
Remove the specified property from the properties file.
BFGUB0079W
The MQMFT property name "<insert_0>" is not valid in file "<insert_1>" of "<insert_2>" and will be ignored.
Severity
10 : Warning
Explanation
MQMFT does not support the property being set in the specified file. The property will be ignored.
Response
Remove the property from the specified properties file. If necessary, set the property in the correct MQMFT properties file.
BFGUB0080E
A required property of ''<insert_0>'' is missing for the properties for "<insert_1>".
Severity
20 : Error
Explanation
The named property is required for this command to complete successfully.
Response
Review the associated property file and either add this property or correct this property.
BFGUB0081E
Internal error: Unknown configuration type of <insert_0> encountered.
Severity
20 : Error
Explanation
CMSG001
Response
If the problem persists, see problem determination information in the product documentation.
BFGUB0082E
Unsupported property ''<insert_0>'' found in property file ''<insert_1>''.
Severity
20 : Error
Explanation
The named property has been removed from the product and its continued use is not supported. The process will not start successfully until this property is removed from the specified property file.
Response
Remove the unsupported property and try the command again.
BFGUB0083W
The property name "<insert_0>" has an invalid numeric value of "<insert_1>". The default value "<insert_2>" has been used instead.
Severity
10 : Warning
Explanation
The named property must be a numeric value.
Response
Review the associated property file and change the property so that it has a valid numeric value.
BFGUB0084W
The property name "<insert_0>" has a value of "<insert_1>", which is not in the range between "<insert_2>" and "<insert_3>". The default value "<insert_4>" has been used instead.
Severity
10 : Warning
Explanation
The named numeric property is present in the configuration, but has a value that is outside the valid range.
Response
Review the associated property file and change the value to one that is in the given ranges.
BFGUB0085W
The property name "<insert_0>" has an invalid Boolean value of "<insert_1>". The default value "<insert_2>" has been used instead.
Severity
10 : Warning
Explanation
The named property has two options only and the option assigned is not valid.
Response
Review the associated property file and change the property to have a value of true or false, yes or no, or on or off.
BFGUB0086W
The property name "<insert_0>" is not a valid MQMFT property and will be ignored.
Severity
10 : Warning
Explanation
MQMFT does not support the specified property. The property will be ignored.
Response
Remove the specified property from the properties file.
BFGUB0087E
Unsupported property ''<insert_0>'' found.
Severity
20 : Error
Explanation
The named property has been removed from the product and its continued use is not supported. The process will not start successfully until this property is removed from the specified property file.
Response
Remove the unsupported property and try the command again.
BFGUB9999E
<insert_0>
Severity
20 : Error
Explanation
If this message does not give enough information, check the accompanying error messages for further information.
Response
For further information on resolving this error, refer to the problem determination information on the product Web site.