+

Search Tips | Advanced Search

Channel configuration for Windows

Example configuration to be performed on the Windows queue manager to implement a given channel.

The following sections detail the configuration to be performed on the Windows queue manager to implement the channel described in Example IBM MQ configuration for all platforms.

In each case the MQSC command is shown. Either start runmqsc from a command prompt and enter each command in turn, or build the commands into a command file.

Examples are given for connecting IBM MQ for Windows and IBM MQ for AIX . To connect to IBM MQ on another platform use the appropriate set of values from the table in place of those for Windows.

Note: The words in bold are user-specified and reflect the names of IBM MQ objects used throughout these examples. If you change the names used here, ensure that you also change the other references made to these objects throughout this section. All others are keywords and should be entered as shown.
Table 1. Configuration worksheet for IBM MQ for Windows
  Parameter Name Reference Example Used User Value
Definition for local node
A Queue Manager Name   WINNT  
B Local queue name   WINNT.LOCALQ  
Connection to IBM MQ for AIX

The values in this section of the table must match those used in Channel configuration for AIX, as indicated.

C Remote queue manager name A AIX  
D Remote queue name   AIX.REMOTEQ  
E Queue name at remote system B AIX.LOCALQ  
F Transmission queue name   AIX  
G Sender (SNA) channel name   WINNT.AIX.SNA  
H Sender (TCP) channel name   WINNT.AIX.TCP  
I Receiver (SNA) channel name G AIX.WINNT.SNA  
J Receiver (TCP) channel name H AIX.WINNT.TCP  
Connection to IBM MQ for HP Tru64 UNIX

The values in this section of the table must match those used in your HP Tru64 UNIX system.

C Remote queue manager name A DECUX  
D Remote queue name   DECUX.REMOTEQ  
E Queue name at remote system B DECUX.LOCALQ  
F Transmission queue name   DECUX  
H Sender (TCP) channel name   DECUX.WINNT.TCP  
J Receiver (TCP) channel name H WINNT.DECUX.TCP  
Connection to IBM MQ for HP-UX

The values in this section of the table must match those used in Channel configuration for HP-UX, as indicated.

C Remote queue manager name A HPUX  
D Remote queue name   HPUX.REMOTEQ  
E Queue name at remote system B HPUX.LOCALQ  
F Transmission queue name   HPUX  
G Sender (SNA) channel name   WINNT.HPUX.SNA  
H Sender (TCP) channel name   WINNT.HPUX.TCP  
I Receiver (SNA) channel name G HPUX.WINNT.SNA  
J Receiver (TCP/IP) channel name H HPUX.WINNT.TCP  
Connection to IBM MQ for Solaris

The values in this section of the table must match those used in Channel configuration for Solaris, as indicated.

C Remote queue manager name A SOLARIS  
D Remote queue name   SOLARIS.REMOTEQ  
E Queue name at remote system B SOLARIS.LOCALQ  
F Transmission queue name   SOLARIS  
G Sender (SNA) channel name   WINNT.SOLARIS.SNA  
H Sender (TCP) channel name   WINNT.SOLARIS.TCP  
I Receiver (SNA) channel name G SOLARIS.WINNT.SNA  
J Receiver (TCP) channel name H SOLARIS.WINNT.TCP  
Connection to IBM MQ for Linux

The values in this section of the table must match those used in Channel configuration for Linux, as indicated.

C Remote queue manager name A LINUX  
D Remote queue name   LINUX.REMOTEQ  
E Queue name at remote system B LINUX.LOCALQ  
F Transmission queue name   LINUX  
G Sender (SNA) channel name   WINNT.LINUX.SNA  
H Sender (TCP) channel name   WINNT.LINUX.TCP  
I Receiver (SNA) channel name G LINUX.WINNT.SNA  
J Receiver (TCP) channel name H LINUX.WINNT.TCP  
Connection to IBM MQ for IBM i

The values in this section of the table must match those used in Channel configuration for IBM i, as indicated.

C Remote queue manager name A AS400  
D Remote queue name   AS400.REMOTEQ  
E Queue name at remote system B AS400.LOCALQ  
F Transmission queue name   AS400  
G Sender (SNA) channel name   WINNT.AS400.SNA  
H Sender (TCP) channel name   WINNT.AS400.TCP  
I Receiver (SNA) channel name G AS400.WINNT.SNA  
J Receiver (TCP) channel name H AS400.WINNT.TCP  
Connection to IBM MQ for z/OS®

The values in this section of the table must match those used in Channel configuration for z/OS, as indicated.

C Remote queue manager name A MVS  
D Remote queue name   MVS.REMOTEQ  
E Queue name at remote system B MVS.LOCALQ  
F Transmission queue name   MVS  
G Sender (SNA) channel name   WINNT.MVS.SNA  
H Sender (TCP) channel name   WINNT.MVS.TCP  
I Receiver (SNA) channel name G MVS.WINNT.SNA  
J Receiver (TCP/IP) channel name H MVS.WINNT.TCP  
Connection to IBM MQ for z/OS using queue-sharing groups

The values in this section of the table must match those used in Shared channel configuration example, as indicated.

C Remote queue manager name A QSG  
D Remote queue name   QSG.REMOTEQ  
E Queue name at remote system B QSG.SHAREDQ  
F Transmission queue name   QSG  
G Sender (SNA) channel name   WINNT.QSG.SNA  
H Sender (TCP) channel name   WINNT.QSG.TCP  
I Receiver (SNA) channel name G QSG.WINNT.SNA  
J Receiver (TCP/IP) channel name H QSG.WINNT.TCP  
Connection to MQSeries® for VSE/ESA

The values in this section of the table must match those used in your VSE/ESA system.

C Remote queue manager name A VSE  
D Remote queue name   VSE.REMOTEQ  
E Queue name at remote system B VSE.LOCALQ  
F Transmission queue name   VSE  
G Sender channel name   WINNT.VSE.SNA  
I Receiver channel name G VSE.WINNT.SNA