Oracle WebLogic Tuxedo Connector Programmer's Guide

      

Oracle WebLogic Tuxedo Connector JATMI Conversations

For more information on conversational communications for Oracle Tuxedo, see Writing Conversational Clients and Servers.

The following sections provide information on conversations and how to define and manage them in your applications:

 


Overview of Oracle WebLogic Tuxedo Connector Conversational Communication

Oracle WebLogic Tuxedo Connector supports Oracle Tuxedo conversations as a method to exchange messages between Oracle WebLogic Server and Oracle Tuxedo applications. In this form of communication, a virtual connection is maintained between the client and the server and each side maintains information about the state of the conversation. The process that opens a connection and starts a conversation is the originator of the conversation. The process with control of the connection is the initiator; the process without control is called the subordinate. The connection remains active until an event occurs to terminate it.

During conversational communication, a half-duplex connection is established between the initiator and the subordinate. Control of the connection is passed between the initiator and the subordinate. The process that has control can send messages (the initiator); the process that does not have control can only receive messages (the subordinate).

 


Oracle WebLogic Tuxedo Connector Conversation Characteristics

Oracle WebLogic Tuxedo Connector JATMI conversations have the following characteristics:

 


Oracle WebLogic Tuxedo Connector JATMI Conversation Primitives

Use the following Oracle WebLogic Tuxedo Connector primitives when creating conversational clients and servers that communicate between Oracle WebLogic Server and Oracle Tuxedo:

Table 6-1 Oracle WebLogic Tuxedo Connector Conversational Client Primitives
Name Operation
tpconnect Use to establish a connection to an Oracle Tuxedo conversational service.
tpdiscon Use to abort a connection and generate a TPEV_DISCONIMM event.
tprecv Use to receive data across an open connection from an Oracle Tuxedo application.
tpsend Use to send data across a open connection to an Oracle Tuxedo application.

 


Creating Oracle WebLogic Tuxedo Connector Conversational Clients and Servers

The following sections provide information on how to create conversational clients and servers.

 

Creating Conversational Clients

Follow the steps outlined in Developing Oracle WebLogic Tuxedo Connector Client EJBs to create Oracle WebLogic Tuxedo Connector conversational clients. The following section provide information on how to use tpconnect to open a connection and start a conversation.

Establishing a Connection to an Oracle Tuxedo Conversational Service

A Oracle WebLogic Tuxedo Connector conversational client must establish a connection to the Oracle Tuxedo conversational service. Use the JATMI primitive tpconnect to open a connection and start a conversation. A successful call returns an object that can be used to send and receive data for a conversation.

The following table describes tpconnect parameters:

Table 6-2 Oracle WebLogic Tuxedo Connector JATMI tpconnect Parameters
Parameter Description
svc Character pointer to a conversational service name. If you do not specify a svc, the call will fail and TPException is set to TPEV_DISCONIMM.
data Pointer to the data buffer. When establishing a connection, you can send data simultaneously by setting the data parameter to point to a buffer. The type and subtype of the buffer must be recognized by the service being called. You can set the value of data to NULL to specify that no data is to be sent.
flags Use flags or combinations of flags as required by your application needs. Valid flag values are: TPSENDONLY: specifies that the control is being retained by the originator. The called service is subordinate and can only receive data. Do not use in combination with TPRECVONLY. TPRECVONLY: specifies that control is being passed to the called service.The originator becomes subordinate and can only receive data. Do not use in combination with TPSENDONLY. TPNOTRAN: specifies that when svc is invoked and the originator is transaction mode, svc is not part of the originator's transaction. A call remains subject to transaction timeouts. If svc fails, the originator's transaction is unaffected. TPNOBLOCK: specifies that a request is not sent if a blocking condition exists. If TPNOBLOCK is not specified, the originator blocks until the condition subsides, a transaction timeout occurs, or a blocking timeout occurs. TPNOTIME: specifies that the originator will block indefinitely and is immune to blocking timeouts. If the originator is in transaction mode, the call is subject to transaction timeouts.

Example TuxedoConversationBean.java Code

The following provides a code example to use tpconnect to start a conversation: Listing 6-1 Example Conversation Code

.

.
.
Context ctx;
Conversation myConv;
TuxedoConnection myTux;
TuxedoConnectionFactory tcf;
.
.
.
ctx = new InitialContext();
tcf = (TuxedoConnectionFactory) ctx.lookup ("tuxedo.services.TuxedoConnection");
myTux = tcf.getTuxedoConnection();
flags =ApplicationToMonitorInterface.TPSENDONLY;
myConv = myTux.tpconnect("CONNECT_SVC",null,flags);
.
.
.

 

Creating Oracle WebLogic Tuxedo Connector Conversational Servers

Follow the steps outlined in Developing Oracle WebLogic Tuxedo Connector Service EJBs to create Oracle WebLogic Tuxedo Connector conversational servers.

 


Sending and Receiving Messages

Once a conversational connection is established between a Oracle WebLogic Server application and an Oracle Tuxedo application, the communication between the initiator (sends message) and subordinate (receives message) is accomplished using send and receive calls. The following sections describe how Oracle WebLogic Tuxedo Connector applications use the JATMI primitives tpsend and tprecv:

 

Sending Messages

Use the JATMI primitive tpsend to send a message to an Oracle Tuxedo application.

The following table describes tpsend parameters:

Table 6-3 Oracle WebLogic Tuxedo Connector JATMI tpconnect Parameters
Parameter Description
data Pointer to the buffer containing the data sent with this conversation.
flags The flag can be one of the following: TPRECVONLY: specifies that after the initiator's data is sent, the initiator gives up control of the connection. The initiator becomes subordinate and can only receive data. TPNOBLOCK: specifies that the request is not sent if a blocking condition exists. If TPNOBLOCK is not specified, the originator blocks until the condition subsides, a transaction timeout occurs, or a blocking timeout occurs. TPNOTIME: specifies that an initiator is willing to block indefinitely and is immune from blocking timeouts. The call is subject to transaction timeouts.

 

Receiving Messages

Use the JATMI primitive tprecv to receive messages from an Oracle Tuxedo application.

The following table describes tprecv parameters:

Table 6-4 Oracle WebLogic Tuxedo Connector JATMI tpconnect Parameters
Parameter Description
flags The flag can be one of the following: TPNOBLOCK: specifies that tprecv does not wait for a reply to arrive. If a reply is available, tprecv gets the reply and returns. If this flag is not specified and a reply is not available, tprecv waits for one of the following to occur: a reply, a transaction timeout, or a blocking timeout. TPNOTIME: specifies that tprecv waits indefinitely for a reply. With this flag, tprecv is immuned from blocking timeouts but is still subject to transaction timeouts. A flag value of 0 specifies that the initiator blocks until the condition subsides or a timeout occurs.

 


Ending a Conversation

A conversation between Oracle WebLogic Server and Oracle Tuxedo ends when the server process successfully completes its tasks. The following sections describe how a conversation ends:

 

Oracle Tuxedo Application Originates Conversation

An Oracle WebLogic Server conversational server ends a conversation by a successful call to return. A TPEV_SVCSUCC event is sent to the Oracle Tuxedo client that originated connection to indicate that the service finished successfully. The connection is then disconnected in an orderly manner.

 

Oracle WebLogic Tuxedo Connector Application Originates Conversation

An Oracle Tuxedo conversational server ends a conversation by a successful call to tpreturn. A TPEV_SVCSUCC event is sent to the Oracle WebLogic Tuxedo Connector client that originated connection to indicate that the service finished successfully. The connection is then disconnected in an orderly manner.

 

Ending Hierarchical Conversations

The order in which an conversation ends is important to gracefully end hierarchal conversations.

Assume there are two active connections: A-B and B-C. If B is a Oracle WebLogic Tuxedo Connector application in control of both connections, a call to return has the following effect: the call fails and a TPEV_SVCERR event is posted on all open connections, and the connections are closed in a disorderly manner.

In order to terminate both connections in an orderly manner, the application must execute the following sequence:

  1. B calls tpsend with TPRECVONLY to transfer control of the B-C connection to the Oracle Tuxedo application C.

  2. C calls departure with rval set to TPSUCCESS, TPFAIL, or TPEXIT.

  3. B calls return and posts an event (TPEV_SVCSUCC or TPEV_SVCFAIL) for A.

Conversational services can make request/response calls. Therefore, in the preceding example, the calls from B to C may be executed using tpacall()or tpcall()instead of tpconnect. Conversational services are not permitted to make calls to tpforward.

 


Executing a Disorderly Disconnect

Oracle WebLogic Server conversational clients or servers execute a disorderly disconnect is through a call to tpdiscon. This is the equivalent of “pulling the plug” on a connection.

A call to tpdiscon:

 


Understanding Conversational Communication Events

Oracle WebLogic Tuxedo Connector JATMI uses five events to manage conversational communication. The following table lists the events, the functions for which they are returned, and a detailed description of each.

Table 6-5 Oracle WebLogic Tuxedo Connector Conversational Communication Events
Event Received by Description
TPEV_SENDONLY Tuxedo tprecv Control of the connection has passed; this Oracle Tuxedo process can now call tpsend
JATMI tprecv Control of the connection has passed; this JATMI process can now call tpsend
TPEV_DISCONIMM Tuxedo tprecv, tpsend, tpreturn The connection has been torn down and no further communication is possible. The JATMI tpdiscon posts this event in the originator of the connection. The originator sends it to all open connections when tpreturn is called. Connections are closed in a disorderly manner and if a transaction exists, it is aborted.
JATMI tprecv, tpsend, return The connection has been torn down and no further communication is possible. The Oracle Tuxedo tpdiscon posts this event in the originator of the connection. The originator sends it to all open connections when return is called. Connections are closed in a disorderly manner and if a transaction exists, it is aborted.
TPEV_SVCERR Tuxedo tpsend or JATMI tpsend Received by the originator of the connection indicating that the subordinate program issued a tpreturn (Oracle Tuxedo) or return (JATMI) and ended without control of the connection.
Tuxedo tprecv or JATMI tprecv Received by the originator of the connection indicating that the subordinate program issued a successful tpreturn (Oracle Tuxedo) or a successful return (JATMI) without control of the connection, but an error occurred before the call completed.
TPEV_SVCSUCC Tuxedo tprecv Received by the originator of the connection, indicating that the subordinate service finished successfully; that is, return was successfully called.
JATMI tprecv Received by the originator of the connection, indicating that the subordinate service finished successfully; that is, tpreturn was called with TPSUCCESS.
TPEV_SVCFAIL Tuxedo tpsend or JATMI tpsend Received by the originator of the connection indicating that the subordinate program issued a tpreturn (Oracle Tuxedo) or return (JATMI) and ended without control of the connection. The service completed with status of TPFAIL or TPEXIT and the data is set to null.
Tuxedo tprecv or JATMI tprecv Received by the originator of the connection indicating that the subordinate program finished unsuccessfully. The service completed with status of TPFAIL or TPEXIT.

 


Oracle WebLogic Tuxedo Connector Conversation Guidelines

Use the following guidelines while in conversation mode to insure successful completion of a conversation: