ttyadm

 

---

 
 
 
 Maintenance Commands                                   ttyadm(1M)
 
 
 


NAME
      ttyadm - format and output port monitor-specific information
 


SYNOPSIS
      /usr/sbin/ttyadm [ -b ]  [ -c ]  [ -h ]  [ -I ]  [  -r count
      ]  [ -i msg ]  [ -m modules ]  [ -p prompt ]  [ -t timeout ]
      [ -S y | n ]  [ -T termtype  ]   -d device   -l ttylabel   -
      s service
 
      /usr/sbin/ttyadm -V
 


DESCRIPTION
      The ttyadm command is an administrative command that formats
      ttymon(1M)-specific  information  and  writes it to standard
      output. The Service Access Facility (SAF) requires each port
      monitor  to provide such a command. Note that the port moni-
      tor administrative file is updated  by  the  Service  Access
      Controller's   administrative   commands,   sacadm(1M)   and
      pmadm(1M). ttyadm provides a means of  presenting  formatted
      port  monitor-specific  (ttymon-specific) data to these com-
      mands.
 


OPTIONS
      -b    Set the ``bi-directional port'' flag. When  this  flag
            is  set,  the  line  can  be  used in both directions.
            ttymon will allow users  to  connect  to  the  service
            associated  with  the  port,  but if the port is free,
            uucico(1M), cu(1C), or ct(1C) can use it  for  dialing
            out.
 
      -c    Set the connect-on-carrier flag for the port.  If  the
            -c  flag is set, ttymon will invoke the port's associ-
            ated service immediately when a connect indication  is
            received  (that  is, no prompt is printed and no baud-
            rate searching is done).
 
      -h    Set the hangup flag for the port. If the  -h  flag  is
            not  set,  ttymon  will  force a hangup on the line by
            setting the speed to 0 before setting the speed to the
            default or specified value.
 
      -I    Initialize only.  If the -I  option  is  used,  ttymon
            will  invoke  the service only once.  This can be used
            to configure a particular device without actually mon-
            itoring it, as with software carrier.
 
      -d device
            device is the full pathname of the device file for the
            TTY port.
 
      -i message
            Specify the inactive (disabled) response message. This
 
 
 
 SunOS 5.8           Last change: 14 Sep 1992                    1
 
 
 
 
 
 
 Maintenance Commands                                   ttyadm(1M)
 
 
 
            message  will  be  sent to the TTY port if the port is
            disabled or the ttymon monitoring  the  port  is  dis-
            abled.
 
      -l ttylabel
            Specify which ttylabel in the /etc/ttydefs file to use
            as  the  starting  point when searching for the proper
            baud rate.
 
      -m modules
            Specify  a  list  of  pushable  STREAMS  modules.  The
            modules  will be pushed in the order in which they are
            specified before the service is invoked. modules  must
            be  a  comma-separated  list of modules, with no white
            space included. Any modules currently  on  the  stream
            will be popped before these
             modules are pushed.
 
      -p prompt
            Specify the prompt message, for example, ``login:''.
 
      -r count
            When the -r option is invoked, ttymon will wait  until
            it  receives  data  from the port before it displays a
            prompt. If count is  0,  ttymon  will  wait  until  it
            receives  any  character.  If count is greater than 0,
            ttymon  will  wait  until  count  newlines  have  been
            received.
 
      -s service
            service is the full pathname  of  the  service  to  be
            invoked  when  a  connection  request  is received. If
            arguments are required, the command and its  arguments
            must be enclosed in double quotes (" ").
 
      -t timeout
            Specify that ttymon should close a port if the open on
            the  port  succeeds,  and no input data is received in
            timeout seconds.
 
      -S y|n
            Set the software carrier value.  y will turn  software
            carrier on. n will turn software carrier off.
 
      -T termtype
            Set the terminal type.  The TERM environment  variable
            will be set to termtype.
 
      -V    Display   the   version   number   of   the    current
            /usr/lib/saf/ttymon command.
 
 
 
 
 
 SunOS 5.8           Last change: 14 Sep 1992                    2
 
 
 
 
 
 
 Maintenance Commands                                   ttyadm(1M)
 
 
 
 OUTPUT
      If successful, ttyadm will generate the  requested  informa-
      tion,  write  it to  standard output, and exit with a status
      of 0. If ttyadm is invoked with an invalid number  of  argu-
      ments  or  invalid  arguments, or if an incomplete option is
      specified, an error message  will  be  written  to  standard
      error and ttymon will exit with a non-zero status.
 


FILES
      /etc/ttydefs"
 


ATTRIBUTES
      See attributes(5) for descriptions of the  following  attri-
      butes:
 
      ____________________________________________________________
     |       ATTRIBUTE TYPE        |       ATTRIBUTE VALUE       |
     |_____________________________|_____________________________|
     | Availability                | SUNWcsu                     |
     |_____________________________|_____________________________|
 
 


SEE ALSO
      ct(1C),   cu(1C),   pmadm(1M),    sacadm(1M),    ttymon(1M),
      uucico(1M), attributes(5)
 
      System Administration Guide, Volume 1
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 SunOS 5.8           Last change: 14 Sep 1992                    3
 
 
 

---