Rational Functional Tester error messages

This section provides information about error messages that you might encounter with IBM Rational Functional Tester . This section lists the error messages by ID, explanation, system action and your response to correct the error message.

• CRFCC0002E
  Unable to configure the project for ClearCase.

• CRFCC0005E
  Object Maps not merged due to CM failures

• CRFCC0006E
  Object Maps not merged because target map file is read-only

• CRFCC0007E
  Map merge problems

• CRFCC0008E
  Script Definition: Merge: The test object name is a reserved word test_object. Rename the test object {0}, and then check the script in.

• CRFCC0009E
  Option option_name is not defined

• CRFCC0010E
  -option_name option must be preceded by a -from mapFileName option.

• CRFCC0011E
  -option_name option must be preceded by a -to mapFileName option.

• CRFCC0012E
  The -option_name option must be followed by a map file name.

• CRFCC0013E
  Unable to complete the operation. The file file_name could not be copied. Typically, this is because you are out if disk space.

• CRFCC0014E
  Unable to complete the operation. The file file_name could not be copied. Typically, this is because you are out if disk space.

• CRFCC0015E
  Unable to create file file_name. Check to see if you have sufficient disk space.

• CRFCC0018E
  Unable to merge the directory. You must remove the conflict by renaming the file or script, or complete the graphical merge.

• CRFCC0019E
  Unable to merge the file. It is too different from its predecssor. Save the file or script under a different name and add it to ClearCase.

• CRFCC0020E
  Unable to copy file_name to file_path. Copy the file manually.

• CRFCC0021E
  Unable to checkout file_path. Make sure you have enough disk space.

• CRFCC0022E
  Unable to copy current_path to destination_path

• CRFCC0023E
  Unable to rename the file file_path

• CRFCC0024E
  Unable to checkout file_path

• CRFCC0025E
  Unable to modify the file fileName

• CRFCC0026E
  ClearCase is unable to remove the file: fileName.

• CRFCC0027E
  Unable to add the script or file to ClearCase. The selected item is not in a VOB.

• CRFCC0029E
  Cannot complete the ClearCase operation. Typically this is because you need to install ClearCase type managers on your server machine. Copy the file rtccserverextension.exe to the server machine, {0}. Run it, then try again. For Unix servers, see the documentation.

• CRFCC0030W
  You cancelled the merge. The selected item is not merged or checked in.

• CRFCC0031E
  You cancelled the merge. The shared map was merged and checked in. None of the other files in the script were checked in.

• CRFCC0032E
  You cancelled the merge. None of the files in the script were checked in.

• CRFCC0033E
  The checkin did not complete because object map could not be merged.

• CRFCC0034E
  Unable to update the Script Helper file. Select Script > Update Script Helper to re-create the helper. Then check in the script.

• CRFCC0035E
  Selected project is not a Functional Test project. Specify another repository type.

• CRFCC0036E
  IBM Rational Functional Tester is currently configured for ClearCase Remote Client. Select ClearCase Remote Client as the repository type.

• CRFCC0037E
  Unable to perform operation. The functional test script needs to be checked-out before performing this operation.

• CRFCN0001E
  An invalid subitem was specified or Rational Functional Tester does not support the specified subitem.

• CRFCN0002E
  Attempt to perform mouse operation on co-ordinates that are off-screen.

• CRFCN0003E
  Attempt to perform mouse operation on co-ordinates that are off-screen

• CRFCN0004E
  The requested action cannot be completed

• CRFCN0005E
  Operation not supported on UNIX

• CRFCN0006E
  Operation not supported on UNIX

• CRFCN0007E
  The action cannot be completed.

• CRFCN0008E
  Attempt to use a registered object after its associated object has been disposed.

• CRFCN0009E
  An attempt was made to use a {0} type TestObject after its associated object had been disposed of.

• CRFCN0012E
  Test object name is not included in the script definition script definition

• CRFCN0013E
  The jvm_name JVM name is not defined.

• CRFCN0014E
  The specified JVM name is an empty string.

• CRFCN0015E
  The browser browser_name is not defined.

• CRFCN0016E
  The browser name specified was an empty string.

• CRFCN0017E
  The java_environment Java environment is not enabled.

• CRFCN0018E
  The line_number line of the script_name script contains an exception.

• CRFCN0019E
  The script_name script contains the exception on line line_number.

• CRFCN0020W
  No datapool has been initialized for this script

• CRFCN0021E
  The key_string keystring is not a valid character or tool name for an unprintable character.

• CRFCN0022E
  The mouse_move mouse event is not a valid low-level mouse action.

• CRFCN0023E
  A script asset cannot be renamed to the reserved word, reserved_word.

• CRFCN0024E
  The test object cannot be renamed to this name that is already in use: object_name

• CRFCN0025E
  The specified test object name does not exist: object_name

• CRFCN0026W
  A file already exists with the name of the proposed new project log folder: folder_name

• CRFCN0010E
  Invalid iteration count on playback of script.

• CRFCN0011E
  Error loading the Object Map.

• CRFCN0029E
  Error copying template.

• CRFCN0036E
  Cross project script call to project project_name not supported on agent machine.

• CRFCN0037E
  Unable to load script script_name from project project_name.

• CRFCN0042E
  Shared datapool could not be loaded

• CRFCN0043E
  Failed to insert script commands into script at suggested location, line count failure.

• CRFCN0045E
  Please inspect your script file for special characters that may affect line computations.

• CRFCN0047E
  Datapool could not be loaded

• CRFCN0048E
  Unable to record while there is an open modal dialog.

• CRFCN0056E
  The verification point name contains invalid characters.

• CRFCN0064E
  The specified datapool iteration count iteration_count is not valid.

• CRFCN0073E
  Application of unknown type.

• CRFCN0074E
  Could not start the application

• CRFCN0081E
  No Customization directory is specified.

• CRFCN0082E
  Error in RecognitionAttributes format error.

• CRFCN0094E
  The subitem subitem_name is not valid for a Find Property Set.

• CRFCN0096E
  Unable to locate entry in map with a null map id.

• CRFCN0104E
  Errors encountered processing source files in Object Map merge operation.

• CRFCN0105E
  Clipped screen rectangle is empty.

• CRFCN107E
  Unexpected test data type in dynamic VP

• CRFCN0110E
  InvokeTimeoutException raised for method on object id

• CRFCN0113E
  Cannot construct a registered object

• CRFCN0114E
  Construct valuemanager failed while trying to add it to the test system.

• CRFCN0115E
  Construct property converter failed while trying to add it to the test system.

• CRFCN0116E
  Construct value converter failed while trying to add it to the test system.

• CRFCN0117E
  Construct display value class failed while trying to add it to the test system.

• CRFCN0118E
  Unable to open file

• CRFCN0120E
  Could not locate the data file

• CRFCN0121E
  Unprocessed objects from XML file

• CRFCN0122E
  Extra base elements in XML file

• CRFCN0140E
  Unable to resize window to specified dimensions dimension1, dimension2.

• CRFCN0141E
  Invalid argument to window move operation.

• CRFCN0142E
  Unable to move window to specified location: location1, location2.

• CRFCN0144E
  Cannot capture mouse: mouse already captured.

• CRFCN0145E
  LD_PRELOAD not set correctly

• CRFCN0151E
  A visible property set method could not be located for Property: property_name: Class: class_name.

• CRFCN0152E
  Cannot get screen rectangle for subitem.

• CRFCN0153E
  Cannot get screen point for subitem.

• CRFCN0160E
  Error getting option information from the customization file.

• CRFCN0161E
  Error getting proxy information from the customization file.

• CRFCN0162E
  Error getting property converter information from the customization file

• CRFCN0163E
  Error getting value manager information from the customization file

• CRFCN0164E
  Error getting value converter information from the customization file

• CRFCN0165E
  Error getting role information from the customization file

• CRFCN0166E
  Error getting configuration information from the configuration file

• CRFCN0168E
  Error getting image library information from the customization file

• CRFCN0169E
  Error loading configuration file

• CRFCN0170E
  Error storing configuration file

• CRFCN0182E
  Value Out Of Range: value not in minValue to maxValue.

• CRFCN0185W
  Invalid numeric range specified: value

• CRFCN0192E
  The verification point baseline file is not available.

• CRFCN0193E
  Cannot record dynamic VP baseline when not in interactive mode: need to set option -rt.interactive true

• CRFCN0194E
  Verification Point file does not exist

• CRFCN0195E
  Dynamic Verification Point cannot update script definition

• CRFCN0200E
  Error displaying help file file_name.

• CRFCN0203E
  Highlight failed: Test object name not found in script: object_id.

• CRFCN0209E
  Exception: className: exception

• CRFCN0210W
  No data selected for comparison. Select the checkboxes of the nodes you wish to test. Click YES to continue, NO to cancel.

• CRFCN0211W
  Do you want to keep a copy of the existing baseline?

• CRFCN0213W
  Unable to access assets for script: scriptName : className

• CRFCN0215W
  Test Object Map has been changed. Save changes?

• CRFCN0216W
  Do you really want to overwrite an existing Object Map?

• CRFCN0219W
  The map editor could not be hidden before displaying the Insert Test Object wizard opened.

• CRFCN0225W
  Unable to display help about new Test Objects in the Object Map

• CRFCN0226W
  Requested Test Object not in Map: Map id: mapId

• CRFCN0227E
  The source node can not be a child of the target node.

• CRFCN0228E
  The target node can not be a child of the source node.

• CRFCN0232W
  Verification Point has been changed. Save changes?

• CRFCN0234E
  The text editor cannot be edited while it is showing hidden characters.

• CRFCN0238W
  No test object selected to update recognition properties from.

• CRFCN0239W
  Be aware that updating an object with a different type of object is typically an error.

• CRFCN0240E
  No test objects that meets the search criteria were found.

• CRFCN0245E
  The type of value in line {lineNumber} is not correct

• CRFCN0246E
  .class property cannot be removed or changed weight

• CRFCN0247E
  The search could not be completed.

• CRFCN0248W
  You are now in Pause mode. Click the Resume toolbar button to resume browsing the application.

• CRFCN0249E
  The file_name help file cannot be displayed.

• CRFCN0251W
  To capture data for Windows and Net apps first hover over a window in the desired application and select the SHIFT key.

• CRFCN0252E
  Error updating method names in script.

• CRFCN0253E
  The page_name wizard page cannot be created.

• CRFCN0254E
  Configuration directory variable not set in registry. Changes will not be saved. Do you want to continue?

• CRFCN0255E
  The RATIONAL_FT_CONFIGURATION_DIRECTORY environment variable is not set or has been changed. If you continue, your changes will not be saved. Do you want to continue?

• CRFCN0256W
  You are about to set a disabled JRE as the default. Are you sure you want to continue?

• CRFCN0257W
  You are about to set a disabled browser as the default. Are you sure you want to continue?

• CRFCN0258W
  Are you sure you want to remove the default JRE?

• CRFCN0259W
  Are you sure you want to remove the default browser?

• CRFCN0260W
  You are about to enable a currently unsupported browser. This is not recommended, and may result in browser corruption. Are you sure you want to continue?

• CRFCN0261W
  Are you sure you want to disable the default JRE?

• CRFCN02620262W
  Are you sure you want to disable the default browser?

• CRFCN0264E
  JVM configured already. The JVM [jvmName] is at the same location.

• CRFCN0265E
  Browser configured already. The browser [browserName] is at the same location.

• CRFCN0266E
  The name cannot be changed as specified.

• CRFCN0267E
  A JVM named [jvmName] already exists - retaining the old JVM

• CRFCN0268E
  The name field cannot be empty. The current value, name, is retained.

• CRFCN0269E
  A browser is already named. The current browser and name are retained. browser_name.

• CRFCN0270E
  An Eclipse platform is already named. The current platform and name are retained. eclipse_platform.

• CRFCN0271E
  Errors encountered while starting browser.

• CRFCN0273W
  There is already another instance of the Enabler running. More than one Enabler instance cannot be started.

• CRFCN0274W
  The Application Configuration tool and Enabler cannot be run simultaneously.

• CRFCN0275W
  The Object Properties Configuration Tool and Enabler cannot be run simultaneously.

• CRFCN0276E
  JVM_name is not a file or directory in a Java environment. The Java Virtual Machine (JVM) cannot be enabled.

• CRFCN0279E
  The JVM jvmName cannot be enabled until after the system is rebooted.

• CRFCN0280E
  Error enabling JVM JVM_name: exception_message.

• CRFCN0281E
  Failed to get install directory.

• CRFCN0282E
  A valid JVM could not be found at path jvmPathname.

• CRFCN0283E
  Internal error (invalid JVM object)

• CRFCN0284W
  Disabling the product's JRE is not recommended. Are you sure you want to disable this JRE?

• CRFCN0285E
  Error disabling JVM JVM_name: exception_message.

• CRFCN0286W
  A few of the enablement files used by the running JVM will be removed after the system restarts. You must not enable the JVM after a system restart.

• CRFCN0288E
  fileName file cannot be found among the installation files.

• CRFCN0289E
  The accessibility.properties file could not be read.

• CRFCN0291E
  Cannot find IBM Rational Functional Tester installation directory

• CRFCN0292E
  Error enabling browser.

• CRFCN0294E
  Error enabling third-party browser extensions.

• CRFCN0296E
  The browser at browser_path directory cannot be disabled. Reason: error_message

• CRFCN0299E
  Cannot modify installed-chrome.txt.

• CRFCN0300E
  Cannot write overlays.rdf.

• CRFCN0302E
  A browser is required to have a name

• CRFCN0303E
  The file_name file is not the specified directory for an installed browser.

• CRFCN0304E
  Search directory does not exist.

• CRFCN0305E
  The enable_File cannot be modified.

• CRFCN0306E
  An Eclipse shell is required to have a name

• CRFCN0307E
  The folder_name directory is not the directory of an installed Eclipse shell.

• CRFCN0308E
  The file_name file could not be opened. Exception_message.

• CRFCN0309E
  Error creating verification point display.

• CRFCN0310E
  Has been commented out in FtIdMessages.properties

• CRFCN0311E
  Failed to start TSS services. Cannot do TSS logging.

• CRFCN0312E
  Did not login to the specified Rational project.

• CRFCN0313E
  Log specification was cancelled.

• CRFCN0314E
  Datastore definition is null.

• CRFCN0315E
  Datastore is not registered with the specified Rational project.

• CRFCN0316E
  Datastore is null.

• CRFCN0317E
  The TSS log could not be opened.

• CRFCN0318E
  Failed to terminate TSS runtime.

• CRFCN0319E
  Fail to launch TestManager log viewer.

• CRFCN0320E
  Failed to terminate TSS.

• CRFCN0321E
  The log file could not be written to. The event_code code is unknown.

• CRFCN0322E
  Unable to create log name/value data.

• CRFCN0323E
  Logging event failed.

• CRFCN0325E
  The TSS_measure timer could not be started. The exception_code exception is reported.

• CRFCN0326E
  The TSS_measure timer could not be stopped. The exception_code exception is reported.

• CRFCN0327E
  The button_icon toolbar image could not be created. exception_message.

• CRFCN0328E
  The file_name file could not be saved. exception_message.

• CRFCN0329E
  The message cannot be displayed correctly. message_level.

• CRFCN0330E
  Error trying to output to the monitor exception_message.

• CRFCN0331E
  The Test Manager data store cannot be accessed.

• CRFCN0332W
  Project name is associated with current Rational project, but its associated test script source is missing from this Rational project.

• CRFCN0333W
  Project name is associated with current Rational project, but its associated test script source is missing. Would you like to re-associate it to this Rational project? Choosing No will disassociate it from the Rational project.

• CRFCN0334E
  Failed to reset script source data path.

• CRFCN0335E
  The project cannot be unregistered.

• CRFCN0336E
  Failed to create script type in current Rational project.

• CRFCN0337E
  The source_name script source was not created in the current Rational project.

• CRFCN0339E
  Failed to create script source named variable_name in current Rational project.

• CRFCN0340E
  Failed to delete script source named script_source_name from current Rational project.

• CRFCN0341E
  Failed to load TSS classes.

• CRFCN0342E
  The file_name file could not be opened. exception_message.

• CRFCN0343E
  Exception {result}

• CRFCN0345W
  The log already exists. Overwrite?

• CRFCN0346W
  Unable to remove the asset files for script scriptname. You can remove the script asset files using the Navigator view.

• CRFCN0347W
  Deleting mapname object map will make following projectname script(s) unusable. Do you want to delete mapname?

• CRFCN0348W
  Deleting datapool datapool will make following projectname script(s) unusable. Do you want to delete datapool?

• CRFCN0349W
  Project project1 is associated with Rational project project2. If you delete this project, the corresponding script source in the Rational project will become invalid. Would you like to proceed?

• CRFCN0350W
  WARNING: You don't have the proper privilege to delete the associated test script source from TestManager datastore. Would you like to proceed?

• CRFCN0351E
  Could not create project

• CRFCN0352E
  The project could not be connected to.

• CRFCN0353E
  Could not connect to the project

• CRFCN0354W
  This project was created with an older version product which has been upgraded with major change. Click Yes to upgrade the project and connect, click No to abort. Warning: After upgrade, previous versions of the product will not be able to connect to the project. If the project is under Source Control, this operation will modify the server copy as well.

• CRFCN0355W
  This project was created with an newer version product. Incompatibilites could arise. Would you like to continue anyway?

• CRFCN0356W
  This project was created with an older version product which has been upgraded with minor change. Click Yes to upgrade the project and connect, click No to continue.

• CRFCN0357W
  Test suite support may not work properly without upgrading the project!

• CRFCN0358E
  No expected VP found

• CRFCN0359E
  The Object Map associated with script does not exist.

• CRFCN0360W
  You cannot start recording while the Application Configuration Tool is open. Do you want to close the Application Configuration Tool and start recording?

• CRFCN0361W
  You cannot start the Enabler while the Application Configuration Tool is open. Do you want to close the Application Configuration Tool and start the Enabler?

• CRFCN0362W
  You cannot start the Object Properties Configuration Tool while the Application Configuration Tool is open. Do you want to close the Application Configuration Tool and start the Object Properties Configuration Tool?

• CRFCN0363E
  The script cannot be loaded.

• CRFCN0364W
  Couldn't find Test Object in application-under-test. Application may not be running or enabled, or your environment may not be enabled. Test Object may not be visible. Would you like to configure application for testing?

• CRFCN0365W
  You cannot start recording while the Enabler is open. Do you want to close the Enabler and start recording?

• CRFCN0366W
  You cannot start the Application Configuration Tool while the Enabler is open. Do you want to close the Enabler and start the Application Configuration Tool?

• CRFCN0367W
  You cannot start the Object Properties Configuration Tool while the Enabler is open. Do you want to close the Enabler and start the Object Properties Configuration Tool?

• CRFCN0368W
  You cannot start recording while the Object Properties Configuration Tool is open. Do you want to close the Object Properties Configuration Tool and start recording?

• CRFCN0369W
  You cannot start the Application Configuration Tool while the Object Properties Configuration Tool is open. Do you want to close the Object Properties Configuration Tool and start the Application Configuration Tool?

• CRFCN0370W
  You cannot start the Enabler while the Object Properties Configuration Tool is open. Do you want to close the Object Properties Configuration Tool and start the Enabler?

• CRFCN0371E
  The command-line value command_value for the option_variable option is not a valid number.

• CRFCN0372E
  The option_name option cannot be found.

• CRFCN0373E
  Error reading the configuration file

• CRFCN0374E
  The compile operation could not be completed.

• CRFCN0375E
  File not found: file_name. The script script_name cannot be compiled.

• CRFCN0376E
  The command_name Java compiling command cannot be run. The Java error message follows: JavaError_message.

• CRFCN0377E
  Executing Java compiler command [{0}]\nExit code:\n[{1}]

• CRFCN0379E
  Load script class failed [script class] [msg]

• CRFCN0380E
  Construct script class failed.

• CRFCN0381E
  If either -{0} or -{1} options are specified, then both must be specified.

• CRFCN0382E
  Error occurred while trying to create the record toolbar

• CRFCN0383E
  -{0} must be followed by a path

• CRFCN0384E
  Only one -{0} allowed in the command line arguments

• CRFCN0385E
  -openscript command line option must be followed by a script name

• CRFCN0386E
  -line must be followed by a line number

• CRFCN0387E
  Line number must be a positive integer

• CRFCN0388E
  -openhelp command line option must be followed by a help topic

• CRFCN0389E
  The IDE specified "{0}" is not supported

• CRFCN0390E
  Executing rational_ft command failed

• CRFCN0391E
  Executing rational_ft command [{0}] Error message [{1}]

• CRFCN0392E
  -startide must precede -openhelp <help-topic>

• CRFCN0393E
  -startide must precede -openscript <script-name>

• CRFCN0394E
  -startide must precede -recordscript

• CRFCN0395E
  -startide must precede -createscript

• CRFCN0396E
  -startide must precede -activate

• CRFCN0397E
  No datastore specified

• CRFCN0398E
  Invalid line number [{0}] specified. Must be greater than or equal to zero (0).

• CRFCN0399E
  No file name specified

• CRFCN0400E
  No file name specified

• CRFCN0401E
  No map name specified

• CRFCN0402E
  No actual VP file name specified

• CRFCN0403E
  Combine Maps: No target map file name specified

• CRFCN0404E
  Combine Maps: No source script definition or map file names specified

• CRFCN0405E
  Enabler does not have a JRE or browser by the name [{0}]

• CRFCN0406E
  A failure occurred trying to write the config for the executable.

• CRFCN0407E
  The Java system property specifies IBM Rational Functional Tester install directory that cannot be found.

• CRFCN0408E
  The installation directory specified in the system environment variable is null.

• CRFCN0409E
  -startide command line option must be followed by an idetype: wswplugin or vsdotnet

• CRFCN0410E
  -openscript command line option must be followed by a script name

• CRFCN0411E
  -{0} must be followed by a help topic

• CRFCN0412E
  Only one -{0} allowed in the command line arguments

• CRFCN0413E
  The -{0} directory [{1}] can not be found.

• CRFCN0414E
  -{0} command line option must be followed by a script name, or follow an option which specifies the script name

• CRFCN0415E
  -{KeywordRecordOption}-{0} command line option must be followed by a keyword, RMT Datastore, keyword file and keyword script name

• CRFCN0418E
  There is no data after the -{0} command line option

• CRFCN0419E
  -{0} option only valid after a -playback option. It must follow a playback option and before the next record option.

• CRFCN0420E
  There is no project path after the -{projectPathOption} command line option

• CRFCN0421E
  -{enableNameOption} option must be followed by a name of a browser or JRE configured in the Enabler.

• CRFCN0422E
  -{displayOption} option must be followed by a filename

• CRFCN0423EE
  -{editOption} option must be followed by a filename.

• CRFCN0424E
  Expected/actual/baseline option must be followed by expected and actual RFTVP filenames

• CRFCN0426EE
  -{createOption} option must be followed by a script name.

• CRFCN0427E
  -{createMap} option must be followed by a map filename.

• CRFCN0428E
  -{combineMaps} option must be preceded by a -map mapFileName option.

• CRFCN0429E
  -{helperOption} option must be followed by a script name.

• CRFCN0430E
  -{createHelperSuper} option must be followed by a full class name specification.

• CRFCN0431E
  -{CLIENT_MAILSLOT}option must be followed by a mail slot name

• CRFCN0432E
  -{IDE_TYPE} option must be followed by the IDE type

• CRFCN0433E
  -session_host must be followed by a hostname

• CRFCN0434E
  -session_port must be followed by a port number

• CRFCN0435E
  -session_id must be followed by a session id number

• CRFCN0436E
  The -tmUser option must be followed by a user name.

• CRFCN0437E
  The -passwordOption option must be followed by a password.

• CRFCN0438E
  The -TM_PROJECT option must be followed by a full path and project file.

• CRFCN0439E
  The -LOG_BUILD option must be followed a build name.

• CRFCN0440E
  The -LOG_FOLDER option must be followed the name of a log folder.

• CRFCN0441E
  The -LOG_NAME option must be followed by a log name.

• CRFCN0442E
  -RESET_OPTION option must be followed by an option name

• CRFCN0443E
  The -UPDATESCRIPTDEFS option must be followed by a boolean value (true or false).

• CRFCN0444E
  The -MAP/FROMMAP option must be followed by a datastore relative map file name.

• CRFCN0445E
  The - option must be followed by a datastore relative datapool file name.

• CRFCN0446E
  The -ITERATION_COUNT option must be followed by an iteration count

• CRFCN0447E
  The -ITERATION_COUNT option must be followed by a valid iteration count: value is not valid use ALL or a positive value

• CRFCN0448E
  The -script option must be followed by a full script name.

• CRFCN0449E
  The INSERTAFTER option has an invalid line number: value

• CRFCN0450E
  -CREATE_TESTOBJECT option must be followed by a script name.

• CRFCN0451E
  -option command line option must be followed by a script name, or follow an option which specifies the script name

• CRFCN0452E
  -insertionPoint command line option must be preceded by an insertion point, use option -INSERTBEFORE or - INSERTAFTER

• CRFCN0454E
  Option option_argument has no value

• CRFCN0455E
  Log format log_formatis not a known log format; must be in valid_log_format

• CRFCN0456E
  Command line argument argument considered to be an argument for the last -playback option because it does not match anything else. But no -playback option has been specified on the command line prior to this.

• CRFCN0457E
  An application is required to have a name

• CRFCN0458E
  appName is not a valid application

• CRFCN0461E
  excMsg Default information will be loaded.

• CRFCN0462E
  Error getting application information

• CRFCN0463E
  Could not start the application

• CRFCN0465E
  Empty name field not allowed - retaining old name of name

• CRFCN0466E
  An application named value already exists - retaining original name oldname.

• CRFCN0468W
  There is already another instance of the Application Configuration Tool running.

• CRFCN0469W
  The Enabler and Application Configuration Tool cannot be run simultaneously.

• CRFCN0470W
  The Object Properties Configuration Tool and Application Configuration Tool cannot be run simultaneously.

• CRFCN0471E
  AppConfigTool.mainFromDialog() caught exception: exception

• CRFCN0472E
  Cannot find or read the application information.

• CRFCN0473E
  File read error

• CRFCN0475E
  Unable to remove the Verification Point, verification point. The Verification Point must be removed, or the script may not function correctly. To remove it, check the script out and check it in again. If this fails, use ClearCase Explorer to remove the file.

• CRFCN0476E
  Invalid datapool specification to iterator

• CRFCN0477E
  Invalid datapool equivalence class class specified to iterator

• CRFCN0478E
  Variable name variableName not found in datapool

• CRFCN0480E
  Invalid datapool iterator class name: class

• CRFCN0481E
  Unable to construct datapool iterator class: class

• CRFCN0482E
  Invalid datapool iterator class, not an iterator: iterator

• CRFCN0483E
  Datapool file not found

• CRFCN0484E
  Datapool could not be read

• CRFCN0485E
  Error persisting a datapool in CSV format: file not found: fileName

• CRFCN0486E
  Exception persisting a datapool in CSV format: file

• CRFCN0487E
  Datapool not found: null

• CRFCN0488E
  Datapool could not be found: path

• CRFCN0489E
  Exception serializing datapool: datapool

• CRFCN0490E
  Invalid equivalence class index index specified in method methodname

• CRFCN0491E
  Invalid variable index index specified in method method_name

• CRFCN0492E
  Invalid column specification columnIndex in method

• CRFCN0494E
  Invalid equivalence class specification {0} in {1}

• CRFCN0495E
  Unable to convert value to toType

• CRFCN0496E
  Unable to reorder records, reorder list is null

• CRFCN0497E
  Unable to reorder records, record set contains value1 not value2elements

• CRFCN0498E
  Unable to reorder records, record record_order in reorder list multiple times

• CRFCN0499E
  Invalid record index index in method

• CRFCN0500E
  Invalid cell specification index in method

• CRFCN0501E
  Attempt to access a cell in a record that is not a member of a datapool

• CRFCN0504E
  Multiple matches found while looking for a role with name "property".

• CRFCN0505E
  Multiple matches found while looking for a name.

• CRFCN0506E
  It appears that more than one instance of the HTML document name is open. Close all duplicate browser windows except for the one being tested and click OK to retry.

• CRFCN0507E
  It appears that more than one instance of the application is running, containing a window with title appName. Try closing instances of the application that are not being tested and click OK to retry.

• CRFCN0508E
  It appears that the application has more than one identical window open. The window caption is windowName. Close all identical windows except for the one being tested and click OK to retry.

• CRFCN0509E
  Error while parsing the keyword file.

• CRFCN 0511E
  The file_name image file cannot be found.

• CRFCN0512E
  Playback cannot continue.

• CRFCN0515E
  Playback has stopped.

• CRFCN0520E
  IBM Rational Functional Tester cannot start.

• CRFCN0521E
  Playback cannot continue.

• CRFCN0527E
  Playback cannot continue.

• CRFCN0534E
  Cannot start application application_Name: Cannot find browser browser_Name

• CRFCN0535E
  Playback cannot continue.

• CRFCN0540E
  The recording could not be stopped.

• CRFCN0546E
  Processing the command-line command cannot continue.

• CRFCN0547E
  The added object cannot be recognized during a test run.

• CRFCN0549E
  The ObjectMap map cannot be stored in the object_map file.

• CRFCN0551E
  Playback cannot continue.

• CRFCN0552E
  The recording could not be stopped.

• CRFCN0553E
  Debugging is enabled, an error was encountered, and the debugging log includes an entry for this error.

• CRFCN0555E
  Playback cannot continue.

• CRFCN0557E
  Playback cannot start.

• CRFCN0558E
  Playback cannot continue.

• CRFCN0562E
  Playback cannot continue.

• CRFCN0564E
  Playback cannot continue.

• CRFCN0567E
  The maps for the specified data objects cannot be combined into the target map file.

• CRFCN0570E
  Playback cannot continue.

• CRFCN0574E
  Playback cannot be started.

• CRFCN0576E
  Debugging is enabled, an error was encountered, and the debugging log includes an entry for this error. The configurations.rftcfg file contains more than one instance of the same JRE.

• CRFCN0578E
  The script_name script cannot be played back.

• CRFCN0580E
  The recorder could not be started.

• CRFCN0589E
  The recording cannot be completed.

• CRFCN0594E
  The application_name application in the working_directory directory could not be started.

• CRFCN0596E
  Playback has stopped.

• CRFCN0604E
  Playback cannot continue.

• CRFCN0607E
  The recording could not be paused.

• CRFCN0611E
  The test cannot be played back.

• CRFCN0613E
  The object map cannot be opened.

• CRFCN0617E
  Playback cannot continue.

• CRFCN0626E
  Playback cannot continue.

• CRFCN0639E
  The application to be tested cannot be started.

• CRFCN0647E
  The script_name script cannot be played back.

• CRFCN0649W
  Playback cannot continue.

• CRFCN0653I
  An empty <obj> tag was encountered.

• CRFCN0672E
  Playback cannot continue.

• CRFCN0673E
  The script cannot be played back.

• CRFCN0722E
  The script_name script could not be created.

• CRFCN0715E
  The application cannot be started.

• CRFCN0759E
  The script cannot be played back.

• CRFCN0763E
  The test cannot be played back.

• CRFCN0771E
  The recording stopped.

• CRFCN0775E
  The recording could not resume after a pause.

• CRFCN0778E
  Playback cannot continue.

• CRFCP0001E
  Proxy format error. Expected the element DOMAIN_IMPLEMENTATION. XML contains the element element2.

• CRFCP0002E
  Invalid Type: testDataType

• CRFCP0003E
  The field field_name does not exist, or the caller does not have sufficient permission to access the field.

• CRFCP0004E
  You cannot set a property on the Process domain.

• CRFCP0005E
  Screen rectangle could not be computed.

• CRFCP0006E
  Screen rectangle could not be computed after scrolling.

• CRFCP0007E
  Screen rectangle could not be computed

• CRFCP0008E
  Screen rectangle could not be computed

• CRFCP0009E
  Unabled to raise child context menu: subitem

• CRFCP0010E
  Invalid state for action: state

• CRFCP0011E
  Can not deselect a radiobutton.

• CRFCP0012E
  Can not set a checkbox to an indeterminate state.

• CRFCP0013E
  AWT List: Unable to scroll into view: subitem.

• CRFCP0014E
  Unsupported action for list control: Item is item and Action is action

• CRFCP0015E
  Unsupported action for list control: Action is action

• CRFCP0016E
  java.awt.Choice: popup window is not visible, so subitem can not be located.

• CRFCP0017E
  java.awt.Choice: can not raise the popup window.

• CRFCP0018E
  setState method for Choice control can only be used to select a subitem. Current action is action

• CRFCP0019E
  Choice control can only set state to one item at a time: First item is item1, last item is itemlast

• CRFCP0020E
  AWT FileDialog associated window could not be found.

• CRFCP0021E
  Unable to activate file dialog - dialog not found.

• CRFCP0022E
  Unable to raise child menu: parent_object_name

• CRFCP0023E
  Unable to input keys - top level window not found.

• CRFCP0024E
  Unable to activate window - top level window not found.

• CRFCP0025E
  Unable to activate window - top level window not found

• CRFCP0026E
  Can not resize a window to a negative size.

• CRFCP0027E
  Can not move a window to a null location.

• CRFCP0028E
  Applet host window is not accessible.

• CRFCP0029E
  This action must be performed against the applet host window

• CRFCP0030E
  Invalid state for action: action

• CRFCP0031E
  JRadioButton does not support setStatestate

• CRFCP0032E
  Can not set the state to INDETERMINATE

• CRFCP0033E
  java.jfc.JTree: multiple selection is not allowed

• CRFCP0034E
  java.jfc.JTable: Row Selection is not Allowed

• CRFCP0035E
  java.jfc.JTable: Column Selection is not Allowed

• CRFCP0036E
  java.jfc.JTable: Cell Selection is not Allowed

• CRFCP0037E
  Can not resize a window to a negative size: (dimension1, dimension2)

• CRFCP0038E
  Can not move a window to a null location

• CRFCP0039E
  Minimize is not supported

• CRFCP0040E
  Resize is not supported

• CRFCP0041E
  Can not move a window to a null location

• CRFCP0042E
  tofront is not supported

• CRFCP0043E
  Invalid state for action: state

• CRFCP0044E
  setState can only be used to scroll the split pane: action

• CRFCP0045E
  No screen visible point found

• CRFCP0046E
  java.swt.Combo: setState can only be used to select a subitem: action}

• CRFCP0047E
  java.swt.CTabFolder: setState can only be used to select a subitem: subitem_action

• CRFCP0048E
  Property name was not found

• CRFCP0049E
  Property name is read only

• CRFCP0050E
  No screen point found for object.

• CRFCP0051E
  You cannot set a property on an Html Domain object.

• CRFCP0052E
  No screen visible point found for document.

• CRFCP0053E
  Unable to click to desired state: action

• CRFCP0054E
  Unable to set to desired state.

• CRFCP0055E
  Unable to set text in a read-only text area

• CRFCP0056E
  No screen visible point found for form.

• CRFCP0057E
  No Subitems, Image is not an Image Map.

• CRFCP0058E
  Can not resize a window to a negative size: ({dimension1}, {dimension2})

• CRFCP0059E
  Can not move a window to a null location

• CRFCP0065E
  Playback cannot continue.

• CRFCP0067E
  Playback cannot continue.

• CRFWW0001E
  Could not open file: {0}. Check if file is a part of workspace

• CRFWW0002W
  Do you want to delete the existing private datapool?

• CRFWW0003E
  Problem initializing rational IDE.

• CRFWW0004E
  Critical files are corrupted, missing or cannot be loaded. Reboot your system. If problem persists please reinstall IBM Rational Functional Tester.

• CRFWW0005E
  Failed to load TestManager. Please check if your system environment has been setup properly, or re-install Rational suite.

• CRFWW0006E
  Problem enabling default environments for testing.

• CRFWW0007E
  Problems adding files to ClearCase

• CRFWW0008E
  Problems checking files into ClearCase

• CRFWW0009E
  Unable to check out from ClearCase

• CRFWW0010E
  The major version of the project is not compatible with the product version.

• CRFWW0011E
  The minor version of the project does not match the minor version of the product.

• CRFWW0012E
  Unable to update files from ClearCase

• CRFWW0013E
  The major version of the project is not compatible with the product version. This project will be disconnected.

• CRFWW0014E
  Unable to undo check out

• CRFWW0015E
  ClearCase compare problem.

• CRFWW0016E
  Unable to register project with ClearCase.

• CRFWW0017E
  Please wait for another script to finish.

• CRFWW0018E
  Unable to find script.

• CRFWW0019E
  Classpath error: {errmsg}

• CRFWW0020E
  Try resetting the project java build path to resolve errors encountered running the script.

• CRFWW0021E
  Couldn't find a script to playback. Please check your selection.

• CRFWW0023E
  The specified datapool iteration count [count] is not valid.

• CRFWW0024E
  Object Map does not exist

• CRFWW0025E
  Problem renaming script assets

• CRFWW0026E
  Problem opening file

• CRFWW0028E
  Problem deleting script assets

• CRFWW0029W
  WARNING: The integration with Rational Project will no longer work. This includes TestManager suites and script sources. When you associate with Rational Project again a new TestManager script source will be created. This operation cannot be undone. Would you like to proceed?

• CRFWW0030W
  The destination file exists. Do you want to overwrite it?

• CRFWW0031E
  There are no files to export.

• CRFWW0032E
  Problem encountered during the export.

• CRFWW0033W
  Unable to access script assets for scriptFile. Do you wish to proceed without this script?

• CRFWW0034E
  Problem encountered during the import

• CRFWW0035E
  Refresh failed.

• CRFWW0036E
  Unable to update the destination.

• CRFWW0037E
  Unable to create the destination directory

• CRFWW0038E
  Publish failed on {fileName} The following files were updated.{updatedFileList} Do you want to undo the operation? Select No if you want to continue publishing the rest of the files.

• CRFWW0039E
  Unable to create backup directory

• CRFWW0040E
  Unable to copy file to backup directory

• CRFWW0041E
  Unable to read the file {fileName} while creating backup

• CRFWW0042E
  Problem encountered during the publishing.

• CRFWW0043W
  Unable to access script assets for scriptFile. Do you wish to proceed without this script?

• CRFWW0044W
  Datapool structure changed. Are you sure you want to change the association?

• CRFWW0045E
  Problem associating datapool with scripts

• CRFWW0046E
  Could not insert data driven commands

• CRFWW0047E
  Problem encountered during the export.

• CRFWW0048E
  Could not create datapool

• CRFWW0049E
  Create datapool problems

• CRFWW0050E
  Could not create datapool

• CRFWW0051E
  Error showing datapool page.

• CRFWW0052W
  Scripts associated with this datapool will be made unusable. Are you sure you want to remove datapool association?

• CRFWW0053E
  Cannot modify a readonly file!

• CRFWW0054W
  The following scripts are already associated with a datapool. Changing the datapool associated with a script can cause the script to run incorrectly. Do you want to change the datapool associated with each script?

• CRFWW0055E
  Problem associating datapool with scripts

• CRFWW0056E
  Problem encountered during the import.

• CRFWW0057W
  Datapool datapoolName has been modified. Save changes?

• CRFWW0058E
  Object Map not created due to CM failures

• CRFWW0059E
  Could not create Object Map

• CRFWW0060E
  Could not create script

• CRFWW0061E
  Script copied however an error occurred updating the script with its new name and location. Any compile errors need to be fixed manually.

• CRFWW0062E
  Could save new script

• CRFWW0063E
  Could not save the editor's copy of the script to the new location. Any changes made to the script since the last save have been lost.

• CRFWW0064E
  Could not record into script

• CRFWW0065E
  Please make sure that a Functional Test script is active

• CRFWW0066E
  Please select the line where callScript should be inserted

• CRFWW0068E
  Make sure that you selected one or more scripts or test folders containing scripts and that these scripts are from the same project as current script.

• CRFWW0069W
  Only scripts from the current project have been inserted

• CRFWW0070E
  Could not insert test object(s)

• CRFWW0071E
  Could not rebuild project

• CRFWW0073E
  Could not create script helper superclass

• CRFWW0074E
  Specified project path does not exist

• CRFWW0075W
  There are two connections "{0}" and "{1}" to the same project. But the associated test script source in current project can only point to one of the copies. You should disconnect from one of them.

• CRFWW0076E
  The files for the {projectName} do not exist. The project, {projectName}, will be disconnected. To use {projectName} when it is part of a stopped ClearCase view, start the view, then select {projectName} and finally select File > Connect to a Functional Test Project.

• CRFWW0077E
  TestManager problem.

• CRFWW0078E
  Error deleting files

• CRFWW0079E
  Problems renaming project item(s)

• CRFWW0080E
  Could not open project

• CRFWW0081E
  Could not create new project

• CRFWW0082E
  Could not open log.

• CRFWW0083E
  Select a verification point.

• CRFWW0084E
  Could not create test folder

• CRFWW0085E
  The project is locked for publish by other users/application.