Portal, V6.1 Operating systems: AIX, HP-UX, i5/OS, Linux, Solaris, Windows

---

 

Prepare your HP-UX operating system

Configure HP-UX kernel settings before installing

To set kernel parameters, perform the following steps:

1. Log into the host machine with superuser (root) privileges.

2. Determine the physical memory, which know to avoid setting certain kernel parameters above the physical capacity:

   1. Start the HP-UX System Administration Manager (SAM) utility with the /usr/sbin/sam command.

   2. Select Performance Monitors > System Properties > Memory.

   3. View the value for Physical Memory and click OK.

   4. Exit from the SAM utility.

3. Set the maxfiles and maxfiles_lim parameters to at least 4096. (The table below recommends 8000 and 8196, respectively. You must first edit the /usr/conf/master.d/core-hpux file, to allow the SAM utility to set values greater than 2048:

   If using HP-UX 11i V2, the /usr/conf/master.d/core-hpux file does not exist; instead, use the SAM utility to set the new kernel parameter values. See Reconfiguring the Kernel (HP-UX 11i V2) for details.

   1. Open the file /usr/conf/master.d/core-hpux in a text editor.

   2. Change the line," *range maxfiles<=2048" to "*range maxfiles<=60000"

   3. Change the line, "*range maxfiles_lim<=2048" to "*range maxfiles_lim<=60000"

   4. Save and close the file. Old values might be stored in the /var/sam/boot.config file. Force the SAM utility to create a new boot.config file:

      1. Move the existing version of the /var/sam/boot.config file to another location, such as the /tmp.

      2. Start the SAM utility.

      3. Select Kernel Configuration > Configurable Parameters. When the Kernel Configuration window opens, a new boot.config file exists.

         Alternatively, rebuild the boot.config file with this command: # /usr/sam/lbin/getkinfo -b

4. Set new kernel parameter values:

   1. Start the SAM utility.

   2. Select Kernel Configuration > Configurable Parameters.

   3. For each of the parameters in the following table, perform this procedure:

      1. Highlight the parameter to change.

      2. Select Actions > Modify Configurable Parameter.

      3. Type the new value in the Formula/Value field.

      4. Click OK.

   When WebSphere Portal and DB2 are installed on the same machine, some kernel values are higher than those shown in the table below. If you are using this configuration, refer to the following site for more information: http://publib.boulder.ibm.com/infocenter/db2luw/v8/index.jsp?topic=/com.ibm.db2.udb.doc/start/r0004692.htm

   Typical kernel settings for running WebSphere Portal appear in the following table:

   Parameter	Value
   dbc_max_pct	25
   maxdsiz	805306358
   maxdsiz	2048000000 (when WAS Base and ND products are on the same machine)
   maxfiles_lim	8196 (Change this one before maxfiles.)
   maxfiles	8000
   maxssiz	8388608
   maxswapchunks (valid for HP-UX 11iv1 only)	8192
   max_thread_proc	3000
   maxuprc	512
   maxusers (valid for HP-UX 11iv1 only)	512
   msgmap	2048
   msgmax	65535
   msgmax	131070 (when WAS Base and ND products are on the same machine)
   msgmnb	65535
   msgmnb	131070 (when WAS Base and ND products are on the same machine)
   msgmni	50
   msgseg	32767
   msgssz	96
   msgtql	2046
   nfile	58145
   nflocks	3000
   ninode	60000
   nkthread	7219
   nproc	4116
   npty	2024
   nstrpty	1024
   nstrtel	60
   sema (valid for HP-UX 11iv1 only)	1 (with Embedded Messaging)
   semaem	16384 (with Embedded Messaging)
   semmap (valid for HP-UX 11iv1 only)	514
   semmni	2048
   semmns	16384 (with Embedded Messaging)
   semmnu	1024
   semume	200
   semvmx	32767 (with Embedded Messaging)
   shmmax	2147483647
   shmem (valid for HP-UX 11iv1 only)	1 (with Embedded Messaging)
   shmmni	1024
   shmseg	1024
   STRMSGSZ (valid for HP-UX 11iv1 only)	65535

5. Select Actions > Process New Kernel.

6. Click Yes on the information window to confirm your decision to restart the machine.

7. Follow on-screen instructions to restart your machine and to enable the new settings.

 

Parent topic

Preparing the operating system

---