Printing disk configuration status

 

To print the disk configuration status of your server, complete these procedures. Ensure that you have security officer authority before you do this task.

  1. Enter STRSST on a command line to start system service tools (SST). Sign on to SST.

    To use system service tools, you need a valid service tools user ID.

  2. Select option 3 (Work with Disk Units) and press Enter. The Work with Disk Units display appears.

  3. Select option 1 (Display Disk Configuration) and press Enter. The Display Disk Configuration display appears.

  4. Select option 1 (Display Disk Configuration Status) and press Enter.

  5. At the Display Disk Configuration Status display, print the disk configuration by pressing the Print Screen key on your keyboard.

  6. Page down and repeat until you have printed the entire disk configuration. Ensure that all the disk configuration information is printed.
  7. Record the serial number of the load-source disk unit (unit number 1) for each partition on the server.

If the server is partitioned, repeat steps 1 through 7 for each partition. Be sure to mark each printout for the partition it represents.

 

Parent topic:

Documenting and preparing the server
Related tasks
Preparing to change the hardware feature Preparing to change the hardware feature for a partitioned server Documenting and preparing the server Preparing to upgrade the server Preparing to upgrade the partitioned server
Related information
Service tools user IDs