Working with the BOOTP table

 

From the Work with BOOTP Table display, you can add, change, remove, or display an entry in the BOOTP table.

To work with BOOTP table, perform the following steps:

1. Specify the CFGTCPBP command from the command prompt.

2. Select option 2 (Work with BOOTP Table) on the Configure TCP/IP BOOTP display to view the Work with BOOTP Table display.

   You can also type WRKBPTBL.

Figure 1. Work with BOOTP Table (WRKBPTBL) display

                             Work with BOOTP Table                                                        System:   SYSNAM01  Type options, press Enter.
   1=Add   2=Change   4=Remove   5=Display  
       Client        Host                               MAC                 IP  Opt   Name                               Address             Address  
       act01.ibm.com                      02.01.8C.06.34.98   9.130.42.1  
 
 

 

Parent topic:

Bootstrap Protocol