Problem summary form for multiple partitions (on models other than 8xx)

 

Here is the problem summary form for multiple partitions (on models other than 8xx).

Date and time that the problem occurred:	____/____/____ ___:___:___
Partition state:	_______________________
Partition ID:	_______________________
Partition version:	_______________________
Partition name (optional):	_______________________
Partition release:	_______________________
Describe the problem:	_______________________

Message ID	Message Text	From/Send Program	Instruction Number	To/Receive Program	Instruction Number
________	________	________	________	________	________
________	________	________	________	________	________
________	________	________	________	________	________

1. Record the mode.

2. From Work with Partitions display, use option 10 to set the mode to Manual. For help getting to this display, refer to Accessing control panel functions.

3. Place a check on the lines below to indicate which lights on the panel are on. Refer to Control panel for the system units for a diagram of the control panel.

   _____	Power On
   _____	Processor Active/Activity
   _____	System Attention

4. Record the 8 characters shown in the Display Partition Status display for Reference Codes 11x through 19xx.

   05	__________
   11xx	__________
   12xx	__________
   13xx	__________
   14xx	__________
   15xx	__________
   16xx	__________
   17xx	__________
   18xx	__________
   19xx	__________
   20xx	__________

5. Go to the system control panel to find and record the value for the 20xx Reference Code.

6. Set the same mode as recorded in step 1 of this form.

7. Return to the step that sent you here.

Comments: _______________________________________________________________________

 

Parent topic:

Gathering information with the problem summary form