Display File Field Description (DSPFFD)

Where allowed to run: All environments (*ALL) Threadsafe: No

Parameters Examples Error messages

The Display File Field Description (DSPFFD) command shows, prints, or places in a database file field-level information for one or more files in a specific library or all the libraries to which the user has access.

If the information is put in a database file, the database file will have a record format named QWHDRFFD. The fields in record format QWHDRFFD are the same as the fields in the IBM-supplied format QWHDRFFD in file QADSPFFD in the library QSYS. The following information is contained in the database file:

• For each file specified in the command, the database record contains:

  • The name of the file, the name of the library containing the file, the file type, and file member

  • The file creation date and the number of record formats in the file

  • The name of the record format used by the file, the format level identifier, the format text description, the format record length, and the number of fields in the format

  • The information retrieval date and time

• For each field in the record format, the record also contains the following, if applicable:

  • The field name and external field name

  • The type and length of the field

  • For fields referencing other fields, the name of the referenced file, record format, and field; if any attributes of the referenced field were changed, the attribute type is given

  • The edit code, edit word, and column headings associated with the field

  • A signal of whether validity checking is performed on the field

  • The validity check message identifier, the message file, and the library

  • The use of the field

To create an OUTFILE, the user must have object operational authority to the Create Physical File (CRTPF) command and add authority to the library. To use an existing OUTFILE, the user must have object operational and add authority to the file. The user must also have object management and delete authority if *REPLACE is specified on the OUTMBR parameter.

Restrictions:

1. Before users can display each file specified, they must have object operational authority for the file.

2. Also, of the libraries specified by the library qualifier, only the libraries for which the user has read authority are searched.

Top

---

 

Parameters

Keyword	Description	Choices	Notes
FILE	File	Qualified object name	Required, Positional 1
	Qualifier 1: File	Generic name, name, *ALL
	Qualifier 2: Library	Name, *LIBL, *CURLIB, *USRLIBL, *ALLUSR, *ALL
OUTPUT	Output	*, *PRINT, *OUTFILE	Optional, Positional 2
OUTFILE	File to receive output	Qualified object name	Optional
	Qualifier 1: File to receive output	Name
	Qualifier 2: Library	Name, *LIBL, *CURLIB
OUTMBR	Output member options	Element list	Optional
	Element 1: Member to receive output	Name, *FIRST
	Element 2: Replace or add records	*REPLACE, *ADD
SYSTEM	System	*LCL, *RMT, *ALL	Optional

Top

 

File (FILE)

Specifies the name and library of the files.

This is a required parameter.

The possible values for file names are:

file-name

Specify the full name of a file. Only information for the specified file is returned.

generic*-file-name

Specify a generic name. Information is provided for all files whose names begin with the specified characters.

*ALL

All files in the library or libraries have their information shown.

Qualifier 2: Library

*LIBL

All libraries in the library list for the current thread are searched until the first match is found.

*CURLIB

The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.

*USRLIBL

If a current library entry exists in the library list for the current thread, the current library and the libraries in the user portion of the library list are searched. If there is no current library entry, only the libraries in the user portion of the library list are searched.

*ALLUSR

All user libraries are searched. All libraries with names that do not begin with the letter Q are searched except for the following:

 #CGULIB     #DSULIB     #SEULIB #COBLIB     #RPGLIB #DFULIB     #SDALIB 

Although the following Qxxx libraries are provided by IBM, they typically contain user data that changes frequently. Therefore, these libraries are considered user libraries and are also searched:

 QDSNX       QRCLxxxxx   QUSRIJS     QUSRVxRxMx QGPL        QSRVAGT     QUSRINFSKR QGPL38      QSYS2       QUSRNOTES QMGTC       QSYS2xxxxx  QUSROND QMGTC2      QS36F       QUSRPOSGS QMPGDATA    QUSER38     QUSRPOSSA QMQMDATA    QUSRADSM    QUSRPYMSVR QMQMPROC    QUSRBRM     QUSRRDARS QPFRDATA    QUSRDIRCL   QUSRSYS QRCL        QUSRDIRDB   QUSRVI 

1. 'xxxxx' is the number of a primary auxiliary storage pool (ASP).

2. A different library name, in the format QUSRVxRxMx, can be created by the user for each previous release supported by IBM to contain any user commands to be compiled in a CL program for the previous release. For the QUSRVxRxMx user library, VxRxMx is the version, release, and modification level of a previous release that IBM continues to support.

*ALL

All libraries in the system, including QSYS, are searched.

name

Specify the name of the library to be searched.

Top

 

Output (OUTPUT)

Specifies whether the output from the command is displayed at the requesting work station or printed with the job's spooled output.

*

The output is displayed (if requested by an interactive job) or printed with the job's spooled output (if requested by a batch job).

*PRINT

The output is printed with the job's spooled output.

*OUTFILE

The output is directed to the database output file specified on the File to receive output prompt (OUTFILE parameter).

Top

 

File to receive output (OUTFILE)

Specifies the name and library of the database output file to which the output of the command is directed. If the file does not exist, this command creates a database output file in the specified library.

The possible library values are:

*LIBL

All libraries in the library list for the current thread are searched until the first match is found.

*CURLIB

The current library for the job is used to locate the file. If no current entry exists in the library list, QGPL is used.

library-name

Specify the name of the library where the file is located.

The outfile format must be the same as QWHDRFFD of system file QADSPFFD. For more information on the outfile format, refer to Database information in the iSeries Information Center at http://www.ibm.com/eserver/iseries/infocenter book.

Top

 

Output member options (OUTMBR)

Specifies the name of the database file member that receives the output of the command.

The possible values are:

*FIRST

The first member in the file receives the output. If no members exist in the file, the system creates a member with the name of the file specified in the File to receive output prompt (OUTFILE parameter).

member-name

Specify the name of the file member that receives the output. If the name does not exist, the system creates it.

The possible values for how information is stored are:

*REPLACE

The output data replaces any existing records in the specified file member.

*ADD

The output data is added to the end of existing records in the specified file member.

Top

 

System (SYSTEM)

Specifies whether the information that is returned is about files on the local system or files on remote systems.

The possible values are:

*LCL

The information returned is about local files only.

*RMT

The information returned is about remote files only.

*ALL

The information returned is about both local and remote files.

Top

---

 

Examples

Example 1: Displaying Information About a File on the Local System

 DSPFFD   FILE(LIB1/FILE2)

This command shows the field-level information about file FILE2 in LIB1 on the local system. The information is shown at the work station where the command was entered.

Example 2: Displaying Information About Files on the Local and Remote Systems

 DSPFFD   FILE(*ALL/*ALL)  SYSTEM(*ALL)

This command shows the field-level information of all files in all libraries authorized to the user on the local system and on all remote systems. For distributed data management files, the display shows only information about the remote file that is named on the RMTFILE parameter of the CRTDDMF command. The information is shown at the work station where the command was entered.

Example 3: Directing Output to a Database File

 DSPFFD   FILE(QGPL/FLDREF)  OUTPUT(*OUTFILE)
         OUTFILE(QGPL/FLDREFX)

This command puts the field-level information for the file FLDREF in the QGPL library on the local system into a database file named FLDREFX in the general purpose library, QGPL. The FLDREFX file in the QGPL library can then be processed by a program.

Top

---

 

Error messages

*ESCAPE Messages

CPF3012

File &1 in library &2 not found.

CPF3014

No file specified as &1 in &2 can be displayed.

CPF3024

File &1 not allowed for SYSTEM(&3).

CPF3052

Description for file &1 not available.

CPF3061

Record format &3 not found for outfile &1.

CPF3063

Output file &1 in &2 not physical file.

CPF3064

Library &1 not found.

CPF3066

Error creating output file &1 in &2.

CPF3067

Error while opening file &1 in &2.

CPF3068

Error while writing to file &1 in &2.

CPF3069

Error while closing file &1 in &2.

CPF3070

Error creating member &3 in file &1.

CPF3072

File &1 in &2 is a system file.

CPF3074

Not authorized to library &1.

CPF3075

Library &1 not available.

CPF3076

Error occurred when on display.

CPF3077

Error occurred when canceling display.

CPF3084

Error clearing member &3 in file &1.

CPF326B

Damage to file &1 in library &2.

CPF9851

Overflow value for file &1 in &2 too small.

CPF9852

Page size too narrow for file &1 in &2.

CPF9899

Error occurred during processing of command.

Top