Change Remote Journal (CHGRMTJRN)

Change Remote Journal (CHGRMTJRN)

Where allowed to run: All environments (*ALL)
Threadsafe: No Parameters
Examples
Error messages

The Change Remote Journal (CHGRMTJRN) command is used to change the journal state for remote journals.
This command is used on the source system for a remote journal that is associated with a source-system journal, to change the state of the remote journal from *ACTIVE to *INACTIVE or from *INACTIVE to *ACTIVE. A journal state of *ACTIVE for a remote journal indicates that journal entries can be received from the associated journal on the source system. A journal state of *INACTIVE for a remote journal indicates that the journal is not ready to receive journal entries from a source journal. This command also allows additional attributes that are associated with the journal state to be set.
The Change Journal (CHGJRN) command can be used to modify the other journal attributes of remote journals, such as the journal message queue, deleting receivers, and text.
Restrictions:

A user profile must exist on the target system by the same name as the user profile that is running this command on the source system. This restriction is irrespective of the selected communications protocol.
Synchronous delivery mode is not supported when a remote journal is specified for the source system journal name parameter.
The journal state of the remote journal to be activated cannot already be *ACTIVE.
The journal state of the remote journal to be inactivated cannot already be *INACTIVE.
If the remote journal state is *CTLINACT, then the remote journal cannot be inactivated by specifying a INACTOPT(*CNTRLD).
The remote journal to be activated cannot already be replicating journal entries to other remote journals.
A journal receiver that was one of a pair of dual receivers cannot be replicated.
A journal receiver that was never attached to a journal after Version 4 Release 2 Modification 0 has been installed cannot be replicated because all of the required information is not contained within the receiver.
The specified relational database directory entry (RDB) must meet the following rules:

The communications protocol must be one of the remote journal function supported protocols.
The remote location name in the RDB cannot refer to the *LOCAL database.
The RDB cannot use an application requester driver program (*ARDPGM) to locate the target system.

Top

Parameters

Keyword Description Choices Notes
RDB Relational database Name Required, Positional 1
SRCJRN Source journal Qualified object name Required, Positional 2
Qualifier 1: Source journal Name
Qualifier 2: Library Name, *LIBL, *CURLIB
TGTJRN Target journal Single values: *SRCJRN
Other values: Qualified object name Optional
Qualifier 1: Target journal Name
Qualifier 2: Library Name
JRNSTATE Journal state *SAME, *ACTIVE, *INACTIVE Optional
DELIVERY Delivery *ASYNC, *SYNC Optional
STRJRNRCV Starting journal receiver Single values: *ATTACHED, *SRCSYS
Other values: Qualified object name Optional
Qualifier 1: Starting journal receiver Name
Qualifier 2: Library Name, *LIBL, *CURLIB
SNDTSKPTY Sending task priority 1-99, *SYSDFT Optional
INACTOPT How to make inactive *CNTRLD, *IMMED Optional

Top

Relational database (RDB)

Specifies the name of the relational database directory entry that contains the remote location name of the target system. This name should match the name of the *LOCAL relational database directory entry on the target system.
This is a required parameter.

relational-database-entry

Specify a maximum of 18 characters for the name of the relational database directory entry.

Top

Source journal (SRCJRN)

Specifies the name of the source journal that is associated with the remote journal that is being changed, and the library in which it resides.
This is a required parameter.
Qualifier 1: Source journal

source-journal-name

Specify the source journal that is associated with the remote journal that is being changed.

Qualifier 2: Library

*LIBL

All libraries in the library list for the current thread are searched until the first match is found.

*CURLIB

The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.

library-name

Specify the name of the library in which the journal resides.

Top

Target journal (TGTJRN)

Specifies the remote journal on the target system that is being changed.
Single values

*SRCJRN

The target journal name is exactly the same as the source journal name.

Qualifier 1: Target journal

target-journal-name

Specify the name of the target journal that is being changed.

Qualifier 2: Library

library-name

Specify the name of the library in which the journal resides.

Top

Journal state (JRNSTATE)

Specifies whether the remote journal is ready to receive journal entries from a source journal.

*SAME

The value does not change.

*ACTIVE

The remote journal is ready to receive journal entries from a source journal.

*INACTIVE

The remote journal is not ready to receive journal entries from a source journal.

Top

Delivery (DELIVERY)

Specifies whether journal entries are replicated synchronously or asynchronously when the remote journal is activated.

This parameter is only valid when JRNSTATE(*ACTIVE) is specified.

*ASYNC

Journal entries are replicated asynchronously.

*SYNC

Journal entries are replicated synchronously.

Top

Starting journal receiver (STRJRNRCV)

The journal receiver where the replication of journal entries from the source system to the target system starts.

This parameter is only valid when JRNSTATE(*ACTIVE) is specified.

*ATTACHED

The replication of journal entries starts with the journal receiver that is currently attached to the remote journal on the target system. The journal entries are replicated from the corresponding journal receiver that is associated with the journal on the source system. The replication starts with the journal entries that follow the last journal entry that currently exists in the attached journal receiver on the target system. If the remote journal on the target system does not have an attached journal receiver, the journal receiver that is currently attached to the journal on the source system is created on the target system and attached to the remote journal on the target system. Then journal entries are replicated starting with the first journal entry in the journal receiver that is currently attached to the journal on the source system. If the journal on the source system does not have an attached journal receiver, which is only possible in the case of a remote journal that is associated with another remote journal, no journal entries can be replicated and an error is returned.

*SRCSYS

The replication of journal entries starts with the journal receiver that is currently attached to the journal on the source system. If the corresponding journal receiver exists and is attached to the remote journal on the target system, journal entries are replicated starting with the journal entries that follow the last journal entry that currently exists in the attached journal receiver on the target system. Otherwise, if the corresponding journal receiver exists but is not attached to the remote journal on the target system, no journal entries can be replicated and an error is returned. If the corresponding journal receiver does not exist on the target system, the journal receiver is created on the target system and attached to the remote journal on the target system. Then journal entries are replicated starting with the first journal entry in the journal receiver that is currently attached to the journal on the source system. If the journal on the source system does not have an attached journal receiver, which is only possible in the case of a remote journal that is associated with another remote journal, no journal entries can be replicated and an error is returned.

starting-journal-receiver-name

Specify the journal receiver where the replication of journal should start. If the corresponding journal receiver exists and is attached to the remote journal on the target system, journal entries are replicated starting with the journal entries that follow the last journal entry that currently exists in the attached journal receiver on the target system. Otherwise, if the corresponding journal receiver exists but is not attached to the remote journal on the target system, no journal entries can be replicated and an error is returned. If the corresponding journal receiver does not exist on the target system, then the journal receiver is created on the target system and attached to the remote journal on the target system. Then journal entries are replicated starting with the first journal entry in the specified journal receiver on the source system.

The name of the starting journal receiver can be qualified by one of the following library values:

*LIBL

All libraries in the library list for the current thread are searched until the first match is found.

*CURLIB

The current library for the thread is searched. If no library is specified as the current library for the thread, the QGPL library is searched.

name

Specify the name of the library to be searched.

Top

Sending task priority (SNDTSKPTY)

Specifies the priority of the sending task on the source system for asynchronously maintained remote journals. The priority is a value from 1 (highest priority) through 99 (lowest priority), which represents the importance of the task when it competes with other tasks for machine resources. This value represents the relative (not absolute) importance of the task.

This parameter is only valid when JRNSTATE(*ACTIVE) and DELIVERY(*ASYNC) are specified.

*SYSDFT

The system chooses a value for the sending task priority that is higher than the highest priority a user may specify (higher than priority 1).

sending-task-priority

Specify a value between 1 and 99 for the priority of the sending task on the source system.

Top

How to make inactive (INACTOPT)

Specifies how the replication of journal entries should be ended when the remote journal is inactivated.

This parameter is only valid when JRNSTATE(*INACTIVE) is specified.

*CNTRLD

A controlled inactivate of journal entry replication is performed. A controlled inactivate means that the system should replicate all journal entries already queued to be sent from the source system to the target system before inactivating the remote journal. No additional journal entries are queued after a request to perform a controlled inactivate. A controlled inactivate is not possible when a journal is in catch-up, or when it is being synchronously maintained. In both of these cases, the request to perform a controlled inactivate is implicitly changed by the system to an immediate inactivate request.

*IMMED

An immediate inactivate of journal entry replication is performed. An immediate inactivate means that the system will not continue to replicate any journal entries that are already queued before inactivating the remote journal.

Top

Examples

Example 1: Activating a Remote Journal to be Maintained Asynchronously
 CHGRMTJRN   RDB(CHICAGO)
            SRCJRN(LCLLIB/JOURNAL1)  TGTJRN(RMTLIB/JOURNAL1)
            JRNSTATE(*ACTIVE)  DELIVERY(*ASYNC)
            SNDTSKPTY(*SYSDFT)
This command activates remote journal JOURNAL1 in library RMTLIB so that journal entries will be replicated from source journal JOURNAL1 in library LCLLIB to remote journal JOURNAL1 in library RMTLIB. The replication will occur asynchronously, and the system will set the priority of the sending task.
Example 2: Inactivating a Remote Journal
 CHGRMTJRN   RDB(CHICAGO)  SRCJRN(LCLLIB/JOURNAL1)
            TGTJRN(RMTLIB/JOURNAL1)
            JRNSTATE(*INACTIVE)  INACTOPT(*IMMED)
This command inactivates remote journal JOURNAL1 in library RMTLIB so that journal entries will no longer be replicated from source journal JOURNAL1 in library LCLLIB to remote journal JOURNAL1 in library RMTLIB. The inactivation will occur immediately.

Top

Error messages

*ESCAPE Messages

CPF69A2

State of journal &1 in &2 not changed.

CPF69A3

State of journal &1 in &2 not changed.

CPF694D

Unexpected journal receiver &8 found.

CPF694F

Communications failure. Reason code &10.

CPF696F

State of journal &1 in &2 not changed.

CPF697A

State of journal &1 in &2 not changed.

CPF697B

State of journal &1 in &2 not changed.

CPF697C

State of journal &1 in &2 not changed.

CPF697D

State of journal &1 in &2 not changed.

CPF697E

State of journal &1 in &2 not changed.

CPF697F

State of journal &1 in &2 not changed.

CPF6973

Systems or journal environments not compatible.

CPF6974

State of journal &1 in &2 not changed.

CPF698A

State of journal &1 in &2 not changed.

CPF698B

Unexpected journal receiver attached to &1.

CPF698C

State of journal &1 in &2 not changed.

CPF698D

Journal &1 not a remote journal.

CPF698E

Journal &1 not associated with source journal.

CPF698F

State of journal &1 in &2 not changed.

CPF6982

Relational database directory entry &1 not valid.

CPF699A

Unexpected journal receiver &8 found.

CPF699E

State of journal &1 in &2 not changed.

CPF6993

State of journal &1 in &2 not changed.

CPF6994

State of journal &1 in &2 not changed.

CPF6995

Unexpected journal receiver &8 found.

CPF6996

Replication of journal entries ended.

CPF6997

Unexpected journal receiver &8 found.

CPF6998

State of journal &1 in &2 not changed.

CPF6999

State of journal &1 in &2 not changed.

CPF70A3

Remote journal &1 in &2 not changed.

CPF70DB

Remote journal function failed.

CPF70D9

Changing journal state not allowed. Reason code &3.

CPF701B

Journal recovery of an interrupted operation failed.

CPF9801

Object &2 in library &3 not found.

CPF9802

Not authorized to object &2 in &3.

CPF9803

Cannot allocate object &2 in library &3.

CPF9810

Library &1 not found.

CPF9814

Device &1 not found.

CPF9820

Not authorized to use library &1.

CPF9830

Cannot assign library &1.

Top

Keyword	Description	Choices	Notes
RDB	Relational database	Name	Required, Positional 1
SRCJRN	Source journal	Qualified object name	Required, Positional 2
	Qualifier 1: Source journal	Name
	Qualifier 2: Library	Name, LIBL, CURLIB
TGTJRN	Target journal	Single values: SRCJRN Other values: Qualified object name*	Optional
	Qualifier 1: Target journal	Name
	Qualifier 2: Library	Name
JRNSTATE	Journal state	SAME, ACTIVE, *INACTIVE	Optional
DELIVERY	Delivery	ASYNC, SYNC	Optional
STRJRNRCV	Starting journal receiver	Single values: ATTACHED, SRCSYS Other values: Qualified object name	Optional
	Qualifier 1: Starting journal receiver	Name
	Qualifier 2: Library	Name, LIBL, CURLIB
SNDTSKPTY	Sending task priority	1-99, *SYSDFT	Optional
INACTOPT	How to make inactive	CNTRLD, IMMED	Optional