Obtaining online help

We can select from three levels of online help for administrative commands.

Start wsadmin.sh.

The top-level help provides general information for the AdminTask object and associated commands. The second-level help provides information about all of the available administrative commands and command groups. The third-level help provides specific help on a command group, a command, or a step. Command group-specific help provides descriptions for the command group specified and the commands that belong to the associated group. Command-specific help provides description for the specified command, and associated parameters and steps. Step-specific help provides a description for the specified step and the associated parameters. For command and step-specific help, required parameters are marked with an asterisk (*) in the help output.

• To obtain general help, run the help command.

  Jacl:

  $AdminTask help

  Jython:

  print AdminTask.help()

  Example output:

  WASX8001I: The AdminTask object enables the execution of available admin
             commands. AdminTask commands operate in two modes:
             the default mode is one which AdminTask communicates with the WebSphere           server to accomplish its task. A local mode is also available, in which            no server communication takes place. The local mode of operation is           invoked by bringing up the scripting client using the command line            "-conntype NONE" option or setting the          "com.ibm.ws.scripting.connectiontype=NONE" property in            wsadmin.properties file.
   The number of admin commands varies and depends on the WebSphere install.  Use the following help commands to obtain a list of supported commands  and their parameters:
   help -commands                  Lists all the admin commands help -commands <pattern>       Lists admin commands matching with wildcard                                 "pattern"
  help -commandGroups             Lists all the admin command groups
  help -commandGroups <pattern>  Lists admin command groups matching with                                 wildcard "pattern"
  help commandName                Displays detailed information for the                               specified command help commandName stepName       Displays detailed information for the specified                                 step belonging to the specified command help commandGroupName           Displays detailed information for the specified                                 command group
   There are various flavors to invoke an admin command:
   commandName                     Invokes an admin command that does not require                                 any argument.
   commandName targetObject        Invokes an admin command with the specified                                 target object string, for example, the                               configuration object name of a resource                                 adapter. The expected target object varies
                                  with the admin command invoked. Use help                                 command to get information on the target                                 object of an admin command.
   commandName options             Invokes an admin command with the specified                                 option strings. This invocation syntax is                                used to invoke an admin command that does                                 not require a target object. It is also                                 used to enter interactive mode if                                 "-interactive" mode is included in the                               options string.
   commandName targetObject options  Invokes an admin command with the specified                                 target object and options strings.  If                                 "-interactive" is included in the options string, then interactive mode is entered.  The target                                 object and options strings vary depending on the                               admin command invoked. Use help command to get                                  information on the target object and options.

• To list the available command groups, run the help command with the -commandGroups parameter.

  Jacl:

  $AdminTask help -commandGroups

  Jython:

  print AdminTask.help('-commandGroups')

  Example output:

  WASX8005I: Available admin command groups:
   AdminAgentNode - Admin Agent Managed Node related tasks
  AdminAgentSecurityCommands - Commands used to configure security related items during Admin Agent registration.
  AdminReports - Admin configuration reports
  AdminSDKCmds - Admin commands related to pluggable SDKs
  AdministrativeJobs - This command group contains all the job management commands .
  AppManagementCommands - Application management commands.
  ...

• To list the available commands, run the help command with the -commands parameter.

  Jacl:

  $AdminTask help -commands

  Jython:

  print AdminTask.help('-commands')

  Example output:

  WASX8004I: Available administrative commands:
   copyResourceAdapter - copy the specified J2C resource adapter to the specified scope createCluster - Creates a new application server cluster.
  createClusterMember - Creates a new member of an application server cluster.
  createJ2CConnectionFactory - Create a J2C connection factory deleteCluster - Delete the configuration of an application server cluster.
  deleteClusterMember - Deletes a member from an application server cluster.
  listConnectionFactoryInterfaces - list all of the  defined connection factory interfaces on the  specified J2C resource adapter.
  listJ2CConnectionFactories - List J2C connection factories that have a specified  connection factory interface defined in the specified J2C resouce adapter
  createJ2CAdminObject - Create a J2C administrative object.
  listAdminObjectInterfaces - List all the defined administrative object interfaces  on the specified J2C resource adapter.  interface on the specified J2C resource adapter.
  listJ2CAdminObjects - List the J2C administrative objects that have a specified  administrative object interface defined in the specified J2C resource adapter.
  createJ2CActivationSpec - Create a J2C activation specification.
  listMessageListenerTypes - list all of the defined messageListener  type on the specified J2C resource adapter.
  listJ2CActivationSpecs - List the J2C activation specifications that have a  specified message listener type defined in the specified J2C resource adapter.

• To obtain help about a command group, run the help command with the group name.

  Jacl:

  $AdminTask help JCAManagement

  Jython:

  print AdminTask.help('JCAManagement')

  Example output:

  WASX8007I: Detailed help for command group: JCAManagement
   Description: A group of administrative commands that help to  configure Java 2 Connector Architecture (J2C)-related resources.
   Commands:
  createJ2CConnectionFactory - Create a J2C connection factory listConnectionFactoryInterfaces - list all of the defined connection  factory interfaces on the specified J2C resource adapter.
  listJ2CConnectionFactories - List J2C connection factories that have  a specified connection factory interface defined in the  specified J2C resouce adapter.  createJ2CAdminObject - Create a J2C administrative object.
  listAdminObjectInterfaces - List all the defined administrative  object interfaces on the specified J2C resource adapter.
  listJ2CAdminObjects - List the J2C administrative objects that have a  specified administrative object interface defined in the  specified J2C resource adapter.
  createJ2CActivationSpec - Create a J2C activation specification.
  listMessageListenerTypes - list all of the defined  message listener types on the specified J2C resource adapter.
  listJ2CActivationSpecs - List the J2C activation specifications that  have a specified message listener type defined in the  specified J2C resource adapter.  copyResourceAdapter - copy the specified J2C resource  adapter to the specified scope.

• To obtain help about an administrative command, run the help command with the parameter name.

  Jacl:

  $AdminTask help createJ2CConnectionFactory

  Jython:

  print AdminTask.help('createJ2CConnectionFactory')

  Example output:

  WASX8006I: Detailed help for command: createJ2CConnectionFactory
   Description: Create a J2C connection factory  *Target object: The parent J2C resource adapter of the created J2C connection factory.
   Arguments:
  *connectionFactoryInterface - A connection factory interface defined in the deployment    description of the parent J2C resource adapter.
  *name - The name of the J2C connection factory.
  *jndiName - The JNDI name of the created J2C connection factory.
  description - The description for the created J2C connection factory.
  authDataAlias - the authentication data alias of the created J2C connection factory.
   Steps:
  None 

  In the command-specific help output that is previously listed, an administrative command is divided into three input areas: target object, arguments, and steps. Each area can require input depending on the administrative command. If an area requires input, each input is described by its name and a description; except for the target object area, which contains the description of the target object only. When you use an administrative command in batch mode, we can use any input name that resides in the argument area as the argument name.

  If an input is required, an asterisk (*) is located before the name. If an area does not require an input, it is marked None. The following example uses the help output for the createJ2CConnectionFactory command:

  • The target object area requires the configuration object name of a J2CResourceAdapter.

  • In the arguments area, there are five inputs with three being required inputs. The argument names are connectionFactoryInterface, name, jndiName, description, and authDataAlias. These names are used as the parameter names in the option string to run an administrative command in batch mode, for example:
    -connectionFactoryInterface javax.resource.cci.ConnectionFactory -name newConnectionFactory -jndiName CF/newConnectionFactory

    See Administrative command invocation syntax for more information about specifying argument options.

  • No step is associated with this administrative command.

• To obtain help on a command step, use the step-specific help.

  Step-specific help provides the following data:

  • A description for the command step.

  • Information indicating if this step supports collection. A collection includes objects of the same type. In a command step, a collection contains objects that have the same set of parameters.

  • Information regarding each step parameter with its name and description. If a step parameter is required, an asterisk (*) is located in front of the name.

  The following example obtains help on a command step:

  Jacl:

  $AdminTask help createCluster clusterConfig

  Jython:

  print AdminTask.help('createCluster', 'clusterConfig')

  Example output:

  WASX8013I: Detailed help for step: clusterConfig
   Description: Configuration of the new server cluster.
   Collection: No
   Arguments:
    *clusterName - Name of server cluster.
    preferLocal - Enables node-scoped routing optimization for the cluster.

  This example indicates the following information about the clusterConfig step:

  • This step does not support collection. Only one set of parameter values for the clusterName and perferLocal parameters is supported.

  • This step contains two input arguments with one argument that is indicated as required. The required arguments is clusterName and the non- required parameter is preferLocal. The syntax to provide step parameter values is different from the command argument values. You have to provide all argument values of a step and provide them in the exact order as displayed in the step specific help. For any optional argument that we do not want to specify a value, put double quotes ("") in place of a value. If a command step is a collection type, for example, it can contain multiple objects where each object has the same set of arguments, we can specify multiple objects with each object enclosed by its own pair of braces. To run an administrative command in batch mode and to include this step in the option string, use the following syntax:

    Jacl:

    -clusterConfig {{newCluster false}}

    Jython:

    -clusterConfig [[newCluster false]]

    See Administrative command invocation syntax for more information about specifying parameter options.

• Use a wildcard character to search for help for a specific command.

  We can use a regular Java expression pattern or a wildcard pattern to specify command name for AdminTask.help('-commands') and AdminConfig list, types, and listTemplates functions.

  • To use a regular Java expression pattern to search for the administrative command names that start with create, specify:
    print AdminTask.help("-commands", "create.*")

  • To use a wildcard search pattern to search for the administrative command names that start with create, specify:
    print AdminTask.help("-commands", "create*")

  • To use a Java expression pattern to search for the administrative command names containing SSLConfig, specify:
    print AdminTask.help("-commands", ".*SSLConfig.*")

  • To use a wildcard search pattern to search for the administrative command names containing SSLConfig, specify:
    print AdminTask.help("-commands", "*SSLConfig*")

Related tasks

Use the wsadmin scripting AdminTask object for scripted administration

Administrative command invocation syntax

Commands for the AdminTask object