Network Deployment (Distributed operating systems), v8.0 > Reference > Tune tips

DB2 tuning parameters

DB2 logging

Gain large performance improvements by setting log files for each database on a different hard drive from the database files.

db2 update db cfg for [database_name] using newlogpath [fully_qualified_path]

Recommended: Use a separate high-speed drive, preferably performance enhanced through a redundant array of independent disk (RAID) configuration.

DB2 configuration advisor

Located in the DB2 Control Center, this advisor calculates and displays recommended values for the DB2 buffer pool size, the database, and the database manager configuration parameters, with the option of applying these values. See more information about the advisor in the online help facility within the Control Center.

Number of connections to DB2 - MaxAppls and MaxAgents

When configuring the data source settings for the databases, confirm the DB2 MaxAppls setting is greater than the maximum number of connections for the data source. If you are planning to establish clones, set the MaxAppls value as the maximum number of connections multiplied by the number of clones. The same relationship applies to the session manager number of connections. The MaxAppls setting must be equal to or greater than the number of connections. If you are using the same database for session and data sources, set the MaxAppls value as the sum of the number of connection settings for the session manager and the data sources.

For example, MaxAppls = (number of connections set for the data source + number of connections in the session manager) multiplied by the number of clones.

After calculating the MaxAppls settings for the WAS database and each of the application databases, verify that the MaxAgents setting for DB2 is equal to or greater than the sum of all of the MaxAppls values. For example, MaxAgents = sum of MaxAppls for all databases.

DB2 buffpage

Improves database system performance. Buffpage is a database configuration parameter. A buffer pool is a memory storage area where database pages containing table rows or index entries are temporarily read and changed. Data is accessed much faster from memory than from disk.

To view the current value of buffpage for database x, issue the DB2 command get db cfg for x and look for the value BUFFPAGE. To set BUFFPAGE to a value of n, issue the DB2 command update db cfg for x using BUFFPAGE n and set NPAGES to -1 as follows:

db2
<-- go to DB2 command mode, otherwise the following "select" does not work as is
    connect to x
<-- (where x is the particular DB2 database name)
    select * from syscat.bufferpools
       (and note the name of the default, perhaps: IBMDEFAULTBP)
       (if NPAGES is already -1, there is no need to issue following command)
    alter bufferpool IBMDEFAULTBP size -1
    (re-issue the above "select" and NPAGES now equals -1)

We can collect a snapshot of the database while the application is running and calculate the buffer pool hit ratio as follows:

1. Collect the snapshot:

   1. Issue the update monitor switches using bufferpool on command.

   2. Make sure that bufferpool monitoring is on by issuing the get monitor switches command.

   3. Clear the monitor counters with the reset monitor all command.

2. Run the application.
3. Issue the get snapshot for all databases command before all applications disconnect from the database, otherwise statistics are lost.

4. Issue the update monitor switches using bufferpool off command.

5. Calculate the hit ratio by looking at the following database snapshot statistics:
   • Buffer pool data logical reads
   • Buffer pool data physical reads
   • Buffer pool index logical reads
   • Buffer pool index physical reads

Default: 250

Recommended:

Continue increasing the value until the snapshot shows a satisfactory hit rate.

The buffer pool hit ratio indicates the percentage of time that the database manager did not need to load a page from disk to service a page request. That is, the page is already in the buffer pool. The greater the buffer pool hit ratio, the lower the frequency of disk input and output. Calculate the buffer pool hit ratio as follows:

• P = buffer pool data physical reads + buffer pool index physical reads
• L = buffer pool data logical reads + buffer pool index logical reads
• Hit ratio = (1-(P/L)) * 100%

DB2 query optimization level

Sets the amount of work and resources that DB2 puts into optimizing the access plan. When a database query runs in DB2, various methods are used to calculate the most efficient access plan. The range is from 0 to 9. An optimization level of 9 causes DB2 to devote a lot of time and all of its available statistics to optimizing the access plan.

The optimization level is set on individual databases and can be set with either the command line or with the DB2 Control Center. Static SQL statements use the optimization level specified on the prep and bind commands. If the optimization level is not specified, DB2 uses the default optimization as specified by the dft_queryopt setting. Dynamic SQL statements use the optimization class specified by the current query optimization special register, which is set using the SQL Set statement. For example, the following statement sets the optimization class to 1:

Set current query optimization = 1

If the current query optimization register is not set, dynamic statements are bound using the default query optimization class.

Default: 5

Recommended: Set the optimization level for the needs of the application. Use high levels only when there are very complicated queries.

DB2 reorgchk

Obtains the current statistics for data and rebinding. Use this parameter because SQL statement performance can deteriorate after many updates, deletes or inserts.

To perform the runstats operation on all user and system tables for the database to which you are currently connected, use...

DB2 reorgchk update statistics on table all

Rebind packages using the bind command. If statistics are available, on DB2 CLP....

db2 -v "select tbname, nleaf, nlevels, stats_time from sysibm.sysindexes"

If no statistic updates exist, nleaf and nlevels are -1, and stats_time has an empty entry (for example: "-"). If the runstats command was previously run, the real-time stamp from completion of the runstats operation also displays under stats_time. If you think the time shown for the previous runstats operation is too old, run the runstats command again.

Default: None

Recommended: None

DB2 locktimeout

Number of seconds that an application waits to obtain a lock. Setting this property helps avoid global deadlocks for applications.

To view the current value of the lock timeout property for database xxxxxx

DB2 get db cfg for xxxxxx

...and look for the value, LOCKTIMEOUT.

To set LOCKTIMEOUT to a value of n...

DB2 update db cfg for xxxxxx

...using LOCKTIMEOUT n, where xxxxxx is the name of the application database and n is a value between 0 and 30 000 inclusive.

Default: -1, meaning lock timeout detection is turned off. In this situation, an application waits for a lock if one is not available at the time of the request, until either of the following events occurs:

• The lock is granted
• A deadlock occurs

Recommended: If your database access pattern tends toward a majority of writes, set this value so that it gives you early warning when a timeout occurs. A setting of 30 seconds suits this purpose. If your pattern tends toward a majority of reads, either accept the default lock timeout value, or set the property to a value greater than 30 seconds.

DB2 maxlocks

Percentage of the lock list that is reached when the database manager performs escalation, from row to table, for the locks held by the application. Although the escalation process does not take much time, locking entire tables versus individual rows decreases concurrency, and potentially decreases overall database performance for subsequent attempts to access the affected tables.

To view the current value of the maxlocks property for database xxxxxx, issue the DB2 get db cfg for xxxxxx command and look for the MAXLOCKS value.

To set MAXLOCKS to a value of n, issue the DB2 update db cfg for xxxxxx command using MAXLOCKS n, where xxxxxx is the name of the application database and n is a value between 1 and 100 inclusive.

Default: Refer to the current database information for property default values per operating system.

Recommended: If lock escalations are causing performance concerns, you might need to increase the value of this parameter or the locklist parameter, which is described in the following paragraph. We can use the database system monitor to determine if lock escalations are occurring.

DB2 locklist

Amount of storage that is allocated to the lock list.

To view the current value of the locklist property for database xxxxxx, issue the DB2 get db cfg for xxxxxx command and look for the LOCKLIST value .

To set LOCKLIST to a value of n, issue the DB2 update db cfg for xxxxxx command using LOCKLIST n, where xxxxxx is the name of the application database and n is a value between 4 and 60 000 inclusive.

Default:

Refer to the current database information for property default values per operating system.

Recommended:

If lock escalations are causing performance concerns, you might need to increase the value of this parameter or the maxlocks parameter, which is described in the previous paragraph. We can use the database system monitor to determine if lock escalations are occurring. Refer to the DB2 Administration Guide: Performance document for more details.

Tune the application serving environment
DB2 v8.2 Information Center
DB2 v9.1 Information Center

+

Search Tips   |   Advanced Search