Express (Distributed operating systems), v8.0 > Reference > Messages
CHKW (V6.1 servers)
CHKW2000I: IBM WebSphere Validation
Explanation No Additional information is available. Action Use the administrative application or the command line scripting tool to update the incorrect configuration.
CHKW2001I: Server Validation
Explanation No Additional information is available. Action Use the administrative application or the command line scripting tool to update the incorrect configuration.
CHKW2003W: An object of an unrecognized type was sent for server validation. The object type is {0}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2010E: The configuration repository of an admin service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2011E: No connectors are configured for an admin service.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2012W: An HTTP connector is configured for an admin service. HTTP connectors are not recommended for an admin service on a server in a production environment.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2013E: The ID {0} of a server is less than the minimum {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2014E: The ID of server {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2015E: The class loader policy {1} of server {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2016E: The class loader policy of server {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2017W: The cell manager {0} is not set to start.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2018E: More than property of the component {0} has the name {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2019E: The cookie of the session manager is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2020E: The domain {1}, of cookie {0}, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2021E: The maximum age {0} of a cookie is too low. The lowest value for a cookie maximum age is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2022E: The maximum age of a cookie is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2023E: The cookie name, {0}, is not valid. The Servlet 2.2 Specification requires that the cookie name be {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2024E: The name of a cookie is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2025E: The path {1}, of the cookie {0}, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2026E: The federated context of the CORBA object name space binding {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2027E: The CORBA name URL of the CORBA object name space binding {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2028E: The class name {1} of the custom service {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2029E: The class name of the custom service {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2030E: The display name of a custom service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2033E: The domain name of a DRS settings object is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2034E: The local broker name of the DRS settings object with domain name {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2035E: A DRS settings object has the configured local DRS broker name {0}, and multiple system message servers are available and which are set to start and which have that broker name available.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2036E: A DRS settings object has the configured local DRS broker name {0}, but no system message server is available having that broker name.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2037E: A DRS settings object has the configured local DRS broker name {0}, but the only system message servers having that broker name are not set to start.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2038E: The cache size of a dynamic cache service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2039E: The cache size {0} of a dynamic cache service too low. The lowest allowed cache is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2040E: The cache size of the dynamic cache service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2041E: The default priority {0} of a dynamic cache service is too low. The lowest allowed default priority is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2042E: The default priority of a dynamic cache service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2043E: The replace type {0}, of a dynamic cache service. is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2045E: The cache of the EJB container {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2046E: The cache size {0} of an EJB cache is too low. The lowest allowed cache size is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2047E: The cache size of an EJB cache is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2048E: The cleanup interval {0} of an EJB cache is too low. The lowest allowed cleanup interval is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2049E: The cleanup interval of an EJB cache is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2050E: The inactive pool cleanup directory {0} of the EJB container is less than the minimum value {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2051E: The cleanup interval of an EJB container is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2052E: The passivation directory {1} of the EJB container {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2053E: The passivation directory of the EJB container {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2054E: The binding EJB JNDI name of the EJB name space binding {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2055E: The server name of an the EJB name space binding {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2056E: No server configuration is present in {0}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2057E: The target {0} is not valid as a Java class name.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2058E: The target {0} is not valid as a JAR file name.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2060E: The target kind to run, {0}, of a Java process definition, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2061E: The target kind to run of a Java process definition is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2062E: The target to run of a Java process definition is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2063E: The adapter bean name {1} of the external cache group member {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2064E: The adapter bean name of the external cache group member {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2065E: The address, {1}, of the external cache group member {0}, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2066E: The address of the external cache group member {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2067E: The name, {0}, of an external cache group, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2068E: The name of an external cache group is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2069E: The type {0} of the external cache group is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2070E: The type of an external cache group is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2071E: The JNDI name of an indirect lookup name space binding {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2072E: The provider URL of an indirect lookup name space binding {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2073E: The first hour {0} of the invalidation schedule must be greater than or equal to {1} and less than or equal to {2}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2074E: The first hour of an invalidation schedule is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2075E: The second hour {0} of the invalidation schedule must be greater than or equal to {1} and less than or equal to {2}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2076E: The second hour of invalidation schedule is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2077E: The number of threads value, {0} for a JMS server is too low. The lowest allowed number of threads is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2078E: The number of threads value for a JMS server is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2079E: The JVM boot class path {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2080E: The JVM class path {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2081E: The JVM debug arguments {0} are not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2082E: The debug mode setting of JVM (JVM) is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2083E: The JVM jar path {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2084E: The jar path of a JVM (JVM) is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2085E: The JVM heap profile arguments {0} are not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2086E: The JVM initial heap size of {0} must be less than the specified maximum heap size of {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2087E: The initial heap size of a JVM (JVM) is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2088E: The JVM initial heap size {0} cannot be less than the maximum heap size {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2089E: The JVM maximum heap size {0} cannot be less than {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2090E: The run heap profile setting of a JVM (JVM) is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2091E: More than one property under a JVM (JVM) have the name {0}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2092E: The maximum messages count, {0}, of a listener port is too low. The lowest allowed maximum messages count is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2093E: The maximum retries count, {0}, of a listener port is too low. The lowest allowed maximum retries count is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2094E: The maximum sessions count, {0}, of a listener port is too low. The lowest allowed maximum sessions count is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2095E: The destination name of listener port {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2096E: The factory name of listener port {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2097E: The maximum messages count of a listener port is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2098E: The maximum retries count of a listener port is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2099E: The maximum sessions count of a listener port is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2100E: The name-in-name-space value of the name space binding {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2101E: The name of a name space binding is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2102E: The synchonization service of the node agent {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2103E: The file transfer service of the node agent {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2104E: The standard error file name of an output redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2105E: The standard output file name of an output redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2106E: The application name of a process definition is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2107E: The process definition working directory {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2108E: The working directory of a process definition is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2109E: The process priority {0} of the process process execution must be greater than or equal to {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2110E: The process priority of a process execution is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2112E: The umask of the process execution {0} must have exactly 3 characters.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2113E: The umask of the process execution {0} must have octal (''0'' through ''7'') characters.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2114E: The type of the typed property {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2115E: The enable correlation ID flag of an RAS logging service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2116E: The message filter level, {0}, of an RAS logging service is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2117E: The message filter level of an RAS logging service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2118E: A root object in {0} is not a server object. (The root object''s type is {1}.)
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2119E: The server {0} has a configured cluster name, {1}, which matches no configured cluster.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2120E: Multiple roots were found in {0}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2123E: The server name {1}, in {0}, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2124E: The name of the server in {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2125E: The server {0}, by its configuration, is set as a member of cluster {1}, but that cluster''s configuration does not list the server as a member.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2126E: The server {0} has no configured admin service.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2127E: The server {0} has no configured name server.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2128E: The enablement flag of a service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2129W: The server {0} has no configured application container.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2130W: The server {0} has no configured transaction service.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2131E: The name of a service log is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2132E: The log size, {0}, of a service log is too low. The lowest allowed log size is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2133E: the log size of a service log is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2134E: Of the properties of a single service, more than one has the name {0}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2135E: The data source JNDI name of a session manager is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2136E: The maximum wait time, {0}, of a session manager is too low. The lowest allowed maximum wait time is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2137E: The maximum wait time of a session manager is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2138E: A session manager has the set domain name {0}, but no multi-broker domain having that name is available.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2139E: The session manager with domain name {0} has the the set local DRS broker name of {1}, but no available multi-broker entry of that domain has an alias which matches the set broker name.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2140E: The persistence mode, {0}, of a session manager is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2141E: The persistence mode of a session manager is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2142E: The database persistence of a session manager is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2143E: The session persistence settings object of a session manager is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2144E: The data source JNDI name of a session persistence is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2145E: The DB2 row size {0} of the session persistence is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2146E: The DB2 row size of a session persistence is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2147E: The table space name of a session persistence is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2148E: The user ID of a session persistence is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2150E: The base hour, {0}, of a stream redirect is not value. The base hour may not be less than {1} and may not be greater than {2}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2151E: The base hour of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2152E: The file name of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2153E: The format writes settings of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2154E: The maximum number of backup files, {0}, of a stream redirect is too low. The lowest allowed maximum number of backup files is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2155E: The maximum number of backup files setting of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2156E: The message format, {0}, of a stream redirect is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2157E: The message format of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2158E: The rollover size of stream redirect is too low. The lowest allowed rollover size is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2159E: The rollover size of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2160E: The rollover period, {0}, of a stream redirect is not valid. The rollover period must be no less than {1} and no greater than {2}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2161E: The rollover peoriod of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2162E: The rollover type value, {0}, of a stream redirect, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2163E: The rollover type of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2164E: The suppress stack traces setting of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2165E: The suppress writes setting of a stream redirect is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2166E: The binding string of a string name space binding is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2167E: The broker name of the system message server {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2168E: The enablement flag of the system message server {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2169E: The system message server {0} is configured to use multi-broker (domain={0}, broker={2}). Multiple multi-brokers are currently available.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2170E: The system message server {0} is configured to use multi-broker (domain={1}, broker={2}), but no multi-broker configuration is found.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2171W: The system message server {0} is configured to use multi-broker (domain={1}, broker={2}), but that multi-broker is not currently configured to start.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2180E: The log file name of a trace log is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2181E: The maximum number of backup files, {0}, of a trace log is too small. The lowest allowed maximum number of backup files is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2182E: The maximum number of backup files of a trace log is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2183E: The rollover size, {0}, of a trace log is too low. The lowest allowed rollover size is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2184E: The rollover size of a trace log log is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2185E: The source path, {0}, of a trace service is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2186E: The memory buffer size {0}, of a trace service, is too low. The lowest allowed memory buffer size is {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2187E: The member buffer size of a trace service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2188E: The trace format value, {0}, of a trace service, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2189E: The trace format of a trace service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2190E: The output type, {0}, of a trace service is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2191E: The output type of a trace service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2192E: The transaction service inactivity timeout {0} is less than the minimum value {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2193E: The inactivity timeout of a transaction service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2194E: The transaction service transaction log file {0} is less than the minimum value {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2195E: The lifetime timeout value of a transaction service is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2196E: The transport of the web container {0}, which uses host {1} and port {2}, has SSL enabled and has the SSL configuration {3}, but no SSL configurations in the cell level security have that alias.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2197E: The session manager must have a tuning parameters.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2198E: The invalidation timeout {0} of a tuning parameters object must be greater than or equal to {1} and may not be {2}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2199E: The invalidation timeout interval of a tuning parameters object is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2200E: The in memory session count {0} of a tuning parameters object is less than the minimum value {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2201E: The session count tuning parameters object is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2202E: The write contents {0} of a tuning parameters object is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2203E: The write contents of a tuning parameters object is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2204E: The write frequency {0} of a tuning parameters object is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2205E: The write frequency of a tuning parameters object is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2206E: The write interval {0} of a tuning parameters must be greater than or equal to {1} and less than or equal to {2}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2207E: The write interval of a tuning parameters is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2208W: When a time based write frequency is selected the invalidation timeout {0} of a tuning parameters object should be at least twice as large as the write interval {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2209E: The thread pool of the web container {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2210E: The web container {0} has more than one transport using the port assignment with host {1} and port {2}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2211E: When HotSpotOption is defined as a JVM system property, a value must be provided.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2212E: The provided HotSpotOption value of {0} in incorrect.
Explanation Valid values are client, server or none. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2213E: When RAS logging is enabled, a ServiceLog name must be provided.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2214E: When tracing output to a file, a file name must be provided.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2215E: The trace file Roll Over Size must contain a value of 1 or more.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2216E: The trace file specification, Maximum Number of Backup Files, must contain a value of 1 or more.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2217E: The class loading mode {1} of server {0} is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2218E: The class loading mode of server {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2219E: The domain name of the system message server {0} is absent.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2220E: The queue name ({0}) of the JMS Server ({1}) has character(s) which are not valid. Valid characters are "{2}".
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2221E: The queue name ({0}), which has length of {1}, is too long. A queue name may not be more than {2} characters long.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2222E: The webcontainer {0} has more than one transport for which the secure socket layer (SSL) is enabled. A web container may have only one transport with the secure socket layer enabled. (A web container may also have no transports for which the secure socket layer is enabled.)
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2223E: The webcontainer {0} has more than one transport for which the secure socket layer (SSL) is disabled. A web container may have only one transport with the secure socket layer disabled. (A web container may also have no transports for which the secure socket layer is disabled.)
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2224E: The webcontainer {0} has more than two transport. A web container may have only one transport with the secure socket layer disabled. (A web container may also have no transports for which the secure socket layer is disabled.)
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2225E: The webcontainer {0} has no transports. A web container may have only one transport with the secure socket layer disabled. (A web container may also have no transports for which the secure socket layer is disabled.)
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2227W: The core group bridge service is disabled, but the high availability manager service is enabled.
Explanation The core group bridge service must be enabled to enable the high availability manager to establish communication between members of different core groups. Action Enable the core group bridge service.
CHKW2228E: The core group bridge service is enabled, but the high availability manager service is disabled.
Explanation The core group bridge service cannot function properly if the high availability manager is not enabled. Action Enable the high availability manager or disable the core group bridge service.
CHKW2229W: The DRS settings attribute {0} is deprecated, but has been assigned a value.
Explanation The specified data replication service (DRS) setting is deprecated. The value assigned to that attribute is ignored. Action Use either the administrative console or the wsadmin scripting tool to remove the specified setting.
CHKW2230E: The logging agent handler level, {0}, is not valid.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2231E: The name of a system property under a JVM (JVM) is absent.
Explanation All supported Java Virtual Machine (JVM) system properties have pre-defined names. An attempt was made to add a JVM system property to a server's configuration but the property name was not specified. Action Use either the administrative console or the wsadmin scripting tool to add the system property, specifying the name of the property and the value to which you want the property set.
CHKW2232E: The name of a property under a component is absent.
Explanation An attempt was made to add a property to the configuration settings for a component. However, the property name was not specified. Action Use either the administrative console or the wsadmin scripting tool to add the property, specifying the name of the property and the value to which you want the property set.
CHKW2233E: The name of service property is absent.
Explanation An attempt was made to add a property to the configuration settings for a service. However, the property name was not specified. Action Use either the administrative console or the wsadmin scripting tool to add the property, specifying the name of the property and the value to which you want the property set.
CHKW2234E: The server {0} has a portlet container with caching enabled, but caching is not enabled in the servlet container of that server.
Explanation Enabling the caching of a portlet container of a server requires that caching be enabled in the servlet container of that server. Action Use either the admin application or the command line scripting tool to enable the servlet caching as well.
CHKW2235W: A system message server component is present in the server {0}, and the product level is 6.0.0.0 or higher.
Explanation A system message server component is present, but the use of system message server components is deprecated. The system message server component will be ignored. Action Update the server's configuration to remove the system message server component.
CHKW2236E: The server {0}, an IIS, APACHE, DOMINO, or SUBJAVASYSTEM web server, has no process definition.
Explanation The Apache, Sun One Web, Microsoft Internet Information Services (IIS), and Domino Web servers require a process definition. Action Add a process definition to the Web server's configuration.
CHKW2237E: The federated server {0}, a federated IHS or HTTPSERVER_ZOS web server, has no process definition.
Explanation A federated IBM HTTP Server, that is installed on either a distributed or z/OS platform, requires a process definition. Action Add a process definition to the Web server's configuration.
CHKW2238E: The maximum pool size, {0}, of a web container, is less than the minimum allowed value, {1}.
Explanation The maximum pool size of a webcontainer must be zero or more, and must be less than or equal to 2147483647. Action Use the admin application or the command line scripting tool to update the maximum pool size of the web server to a valid value.
CHKW2240E: The specified type is not valid for web server {0}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2241E: The specified protocol is not valid for web server {0}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2242E: The specified administration protocol is not valid for web server {0}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2243E: The specified installation root directory {0} is not a valid directory for web server {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2244E: The specified configuration file {0} is not a valid file for web server {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2245E: The specified access log file {0} is not a valid file for web server {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.
CHKW2246E: The specified error log file {0} is not a valid file for web server {1}.
Explanation No additional information is available. Action Use either the administrative console or the wsadmin scripting tool to fix the specified configuration problem.