Appendix I. Required attribute definitions for IBM® Tivoli® Directory Server version 6.0 and above
attributetypes=( 1.3.18.0.2.4.285 NAME 'aclEntry' DESC 'Holds the access controls for entries in an IBM eNetwork LDAP directory' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.285 DBNAME( 'aclEntry' 'aclEntry' ) ACCESS-CLASS restricted LENGTH 32700 ) attributetypes=( 1.3.18.0.2.4.286 NAME 'aclPropagate' DESC 'Indicates whether the ACL applies on entry or subtree.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.286 DBNAME( 'aclPropagate' 'aclPropagate' ) ACCESS-CLASS restricted LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.287 NAME 'aclSource' DESC 'Indicates whether the ACL applies on entry or subtree.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.287 DBNAME( 'aclSource' 'aclSource' ) ACCESS-CLASS system LENGTH 1000 ) attributetypes=( 2.5.4.1 NAME ( 'aliasedObjectName' 'aliasedentryname' ) DESC 'Represents the pointed to entry that is specified within an alias entry.' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 2.5.4.1 DBNAME( 'aliasedObject' 'aliasedObject' ) ACCESS-CLASS normal LENGTH 1000 EQUALITY ) attributetypes=( 1.3.6.1.4.1.1466.101.120.6 NAME 'altServer' DESC 'The values of this attribute are URLs of other servers which may be contacted when this server becomes unavailable.' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 USAGE dSAOperation ) IBMAttributetypes=( 1.3.6.1.4.1.1466.101.120.6 DBNAME( 'altServer' 'altServer' ) ACCESS-CLASS normal LENGTH 2048 ) attributetypes=( 2.5.21.5 NAME 'attributeTypes' DESC 'This attribute is typically located in the subschema entry and is used to store all attributes known to the server and objectClasses.' EQUALITY 2.5.13.30 SYNTAX 1.3.6.1.4.1.1466.115.121.1.3 USAGE directoryOperation ) IBMAttributetypes=( 2.5.21.5 DBNAME( 'attributeTypes' 'attributeTypes' ) ACCESS-CLASS system LENGTH 30 EQUALITY ) attributetypes=( 2.5.4.15 NAME 'businessCategory' DESC 'This attribute describes the kind of business performed by an organization.' EQUALITY 2.5.13.2 SUBSTR 2.5.13.4 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE userApplications ) IBMAttributetypes=( 2.5.4.15 DBNAME( 'businessCategory' 'businessCategory' ) ACCESS-CLASS normal LENGTH 128 EQUALITY SUBSTR) attributetypes=( 2.16.840.1.113730.3.1.5 NAME 'changeNumber' DESC 'Contains the change number of the entry as assigned by the supplier server.' EQUALITY 2.5.13.14 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE NO-USER-MODIFICATION USAGE userApplications ) IBMAttributetypes=( 2.16.840.1.113730.3.1.5 DBNAME( 'changeNumber' 'changeNumber' ) ACCESS-CLASS normal LENGTH 11 EQUALITY APPROX ) attributetypes=( 2.16.840.1.113730.3.1.8 NAME 'changes' DESC 'Defines changes made to a directory server. These changes are in LDIF format.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE NO-USER-MODIFICATION USAGE userApplications ) IBMAttributetypes=( 2.16.840.1.113730.3.1.8 DBNAME( 'changes' 'changes' ) ACCESS-CLASS sensitive ) attributetypes=( 2.16.840.1.113730.3.1.77 NAME 'changeTime' DESC 'Time last changed.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE NO-USER-MODIFICATION USAGE userApplications ) IBMAttributetypes=( 2.16.840.1.113730.3.1.77 DBNAME( 'changeTime' 'changeTime' ) ACCESS-CLASS normal LENGTH 30 ) attributetypes=( 2.16.840.1.113730.3.1.7 NAME 'changeType' DESC 'Describes the type of change performed on an entry. Accepted values include: add, delete, modify, modrdn.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE NO-USER-MODIFICATION USAGE userApplications ) IBMAttributetypes=( 2.16.840.1.113730.3.1.7 DBNAME( 'changeType' 'changeType' ) ACCESS-CLASS normal LENGTH 250 EQUALITY ) attributetypes=( 2.5.4.3 NAME ( 'cn' 'commonName' ) DESC 'This is the X.500 commonName attribute, which contains a name of an object. If the object corresponds to a person, it is typically the persons full name.' SUP 2.5.4.41 EQUALITY 2.5.13.2 ORDERING 2.5.13.3 SUBSTR 2.5.13.4 USAGE userApplications ) IBMAttributetypes=( 2.5.4.3 DBNAME( 'cn' 'cn' ) ACCESS-CLASS normal LENGTH 256 EQUALITY ORDERING SUBSTR APPROX ) attributetypes=( 2.5.18.1 NAME 'createTimestamp' DESC 'Contains the time that the directory entry was created.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 2.5.18.1 DBNAME( 'ldap_entry' 'create_Timestamp' ) ACCESS-CLASS system LENGTH 26 ) attributetypes=( 2.5.18.3 NAME 'creatorsName' DESC 'Contains the creator of a directory entry.' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 2.5.18.3 DBNAME( 'ldap_entry' 'creator' ) ACCESS-CLASS system LENGTH 1000 EQUALITY ) attributetypes=( 2.16.840.1.113730.3.1.10 NAME 'deleteOldRdn' DESC 'a flag which indicates if the old RDN should be retained as an attribute of the entry' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE NO-USER-MODIFICATION USAGE userApplications ) IBMAttributetypes=( 2.16.840.1.113730.3.1.10 DBNAME( 'deleteOldRdn' 'deleteOldRdn' ) ACCESS-CLASS normal LENGTH 5 ) attributetypes=( 2.5.4.13 NAME 'description' DESC 'Attribute common to CIM and LDAP schema to provide lengthy description of a directory object entry.' EQUALITY 2.5.13.2 SUBSTR 2.5.13.4 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE userApplications ) IBMAttributetypes=( 2.5.4.13 DBNAME( 'description' 'description' ) ACCESS-CLASS normal LENGTH 1024 EQUALITY SUBSTR ) attributetypes=( 2.5.21.2 NAME 'ditContentRules' DESC 'Refer to RFC 2252.' EQUALITY 2.5.13.30 SYNTAX 1.3.6.1.4.1.1466.115.121.1.16 USAGE directoryOperation ) IBMAttributetypes=( 2.5.21.2 DBNAME( 'ditContentRules' 'ditContentRules' ) ACCESS-CLASS system LENGTH 256 EQUALITY ) attributetypes=( 2.5.21.1 NAME 'ditStructureRules' DESC 'Refer to RFC 2252.' EQUALITY 2.5.13.29 SYNTAX 1.3.6.1.4.1.1466.115.121.1.17 USAGE directoryOperation ) IBMAttributetypes=( 2.5.21.1 DBNAME( 'ditStructureRules' 'ditStructureRules' ) ACCESS-CLASS system LENGTH 256 EQUALITY ) attributetypes=( 2.5.4.49 NAME ( 'dn' 'distinguishedName' ) DESC 'This attribute type is not used as the name of the object itself, but it is instead a base type from which attributes with DN syntax inherit. It is unlikely that values of this type itself will occur in an entry.' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 USAGE userApplications ) IBMAttributetypes=( 2.5.4.49 DBNAME( 'dn' 'dn' ) ACCESS-CLASS normal LENGTH 1000 EQUALITY ) attributetypes=( 1.3.18.0.2.4.288 NAME 'entryOwner' DESC 'Indicates the distinguished name noted as the owner of the entry' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.288 DBNAME( 'entryOwner' 'entryOwner' ) ACCESS-CLASS restricted LENGTH 1000 ) attributetypes=( 2.5.18.9 NAME 'hasSubordinates' DESC 'Indicates whether any subordinate entries exist below the entry holding this attribute.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 2.5.18.9 DBNAME( 'hasSubordinates' 'hasSubordinates' ) ACCESS-CLASS system LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2244 NAME 'ibm-allGroups' DESC 'All groups to which an entry belongs. An entry may be a member directly via member, uniqueMember or memberURL attributes, or indirectly via ibm-memberGroup attributes. Read-only operational attribute (not allowed in filter).' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2244 DBNAME( 'allGroups' 'allGroups' ) ACCESS-CLASS normal LENGTH 1000 ) attributetypes=( 1.3.18.0.2.4.2243 NAME 'ibm-allMembers' DESC 'All members of a group. An entry may be a member directly via member, uniqueMember or memberURL attributes, or indirectly via ibm-memberGroup attributes. Read-only operational attribute (not allowed in filter).' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2243 DBNAME( 'ibmallMembers' 'ibmallMembers' ) ACCESS-CLASS normal LENGTH 1000 ) attributetypes=( 1.3.18.0.2.4.1077 NAME 'ibm-audit' DESC 'TRUE or FALSE. Enable or disable the audit service. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1077 DBNAME( 'audit' 'audit' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1073 NAME 'ibm-auditAdd' DESC 'TRUE or FALSE. Indicate whether to log the Add operation. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1073 DBNAME( 'auditAdd' 'auditAdd' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1070 NAME 'ibm-auditBind' DESC 'TRUE or FALSE. Indicate whether to log the Bind operation. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1070 DBNAME( 'auditBind' 'auditBind' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1071 NAME 'ibm-auditDelete' DESC 'TRUE or FALSE. Indicate whether to log the Delete operation. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1071 DBNAME( 'auditDelete' 'auditDelete' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1069 NAME 'ibm-auditExtOpEvent' DESC 'TRUE or FALSE. Indicate whether to log LDAP v3 Event Notification extended operations. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1069 DBNAME( 'auditExtOpEvent' 'auditExtOpEvent' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1078 NAME 'ibm-auditFailedOpOnly' DESC 'TRUE or FALSE. Indicate whether to only log failed operations. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1078 DBNAME( 'auditFailedOpOnly' 'auditFailedOpOnly' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1079 NAME 'ibm-auditLog' DESC 'Specifies the pathname for the audit log.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1079 DBNAME( 'auditLog' 'auditLog' ) ACCESS-CLASS critical LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.1072 NAME 'ibm-auditModify' DESC 'TRUE or FALSE. Indicate whether to log the Modify operation. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1072 DBNAME( 'auditModify' 'auditModify' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1075 NAME 'ibm-auditModifyDN' DESC 'TRUE or FALSE. Indicate whether to log the ModifyRDN operation. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1075 DBNAME( 'auditModifyDN' 'auditModifyDN' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1074 NAME 'ibm-auditSearch' DESC 'TRUE or FALSE. Indicate whether to log the Search operation. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1074 DBNAME( 'auditSearch' 'auditSearch' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.1076 NAME 'ibm-auditUnbind' DESC 'TRUE or FALSE. Indicate whether to log the Unbind operation. Default is FALSE.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1076 DBNAME( 'auditUnbind' 'auditUnbind' ) ACCESS-CLASS critical LENGTH 16 ) attributetypes=( 1.3.18.0.2.4.2483 NAME 'ibm-capabilitiessubentry' DESC 'Names the ibm-capabilitiessubentry object listing the capabilities of the naming context containing this object.' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE NO-USER-MODIFICATION USAGE dSAOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2483 DBNAME( 'ibmcapsubentry' 'ibmcapsubentry' ) ACCESS-CLASS system LENGTH 1000 ) attributetypes=( 1.3.18.0.2.4.2444 NAME 'ibm-effectiveAcl' DESC 'An operational attribute that contains the accumulated filter based effective access for entries in an IBM LDAP directory.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2444 DBNAME( 'effectiveAcl' 'effectiveAcl' ) ACCESS-CLASS restricted LENGTH 32700 ) attributetypes=( 1.3.18.0.2.4.2331 NAME 'ibm-effectiveReplicationModel' DESC 'Advertises in the Root DSE the OID of the replication model in use by the server' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2331 DBNAME( 'effectiveReplicat' 'effectiveReplicat' ) ACCESS-CLASS system LENGTH 240 ) attributetypes=( 1.3.18.0.2.4.2482 NAME 'ibm-enabledCapabilities' DESC 'Lists capabilities that are enabled for use on this server.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 NO-USER-MODIFICATION USAGE dSAOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2482 DBNAME( 'ibmenabledcap' 'ibmenabledcap' ) ACCESS-CLASS system LENGTH 100 ) attributetypes=( 1.3.18.0.2.4.2325 NAME 'ibm-entryChecksum' DESC 'A checksum of the user attributes for the entry containing this attribute.' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2325 DBNAME( 'entryChecksum' 'entryChecksum' ) ACCESS-CLASS system LENGTH 100 ) attributetypes=( 1.3.18.0.2.4.2326 NAME 'ibm-entryChecksumOp' DESC 'A checksum of the replicated operational attributes for the entry containing this attribute.' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2326 DBNAME( 'entryChecksumOp' 'entryChecksumOp' ) ACCESS-CLASS system LENGTH 100 ) attributetypes=( 1.3.18.0.2.4.1780 NAME 'ibm-entryUuid' DESC 'Uniquely identifies a directory entry throughout its life.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.1780 DBNAME( 'ibmEntryUuid' 'ibmEntryUuid' ) ACCESS-CLASS system LENGTH 36 EQUALITY ) attributetypes=( 1.3.18.0.2.4.2443 NAME 'ibm-filterAclEntry' DESC 'Contains filter based access controls for entries in an IBM LDAP directory.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2443 DBNAME( 'filterAclEntry' 'filterAclEntry' ) ACCESS-CLASS restricted LENGTH 32700 ) attributetypes=( 1.3.18.0.2.4.2445 NAME 'ibm-filterAclInherit' DESC 'Indicates whether filter based ACLs should accumulate up the ancestor tree.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2445 DBNAME( 'filterAclInherit' 'filterAclInherit' ) ACCESS-CLASS restricted LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.3238 NAME 'ibm-pwdPolicyStartTime' DESC 'Specifies the time Password Policy was last turned on.' ORDERING 2.5.13.28 SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.3238 DBNAME( 'pwdPolicyStartTim' ' pwdPolicyStartTim ' ) ACCESS-CLASS normal LENGTH 30 ) attributetypes=( 1.3.18.0.2.4.2330 NAME 'ibm-replicationChangeLDIF' DESC 'Provides LDIF representation of the last failing operation' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2330 DBNAME( 'replicationChange' 'replicationChange' ) ACCESS-CLASS system ) attributetypes=( 1.3.18.0.2.4.2498 NAME 'ibm-replicationIsQuiesced' DESC 'Indicates whether the replicated subtree containing this attribute is quiesced on this server.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 S INGLE-VALUE NO-USER-MODIFICATION USAGE dSAOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2498 DBNAME( 'replIsQuiesced' 'replIsQuiesced' ) ACCESS-CLASS system LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2338 NAME 'ibm-replicationLastActivationTime' DESC 'Indicates the last time the replication thread was activated' SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2338 DBNAME( 'replicationLastAc' 'replicationLastAc' ) ACCESS-CLASS system LENGTH 32 ) attributetypes=( 1.3.18.0.2.4.2334 NAME 'ibm-replicationLastChangeId' DESC 'Indicates last change ID successfully replicated for a replication agreement' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2334 DBNAME( 'replicationLastCh' 'replicationLastCh' ) ACCESS-CLASS system LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2335 NAME 'ibm-replicationLastFinishTime' DESC 'Indicates the last time the replication thread completed sending all of the pending entries.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2335 DBNAME( 'replicationLastFi' 'replicationLastFi' ) ACCESS-CLASS system LENGTH 30 ) attributetypes=( 1.3.18.0.2.4.2448 NAME 'ibm-replicationLastGlobalChangeId' DESC 'Indicates the ID of the last global (applies to the entire DIT, such as schema) change successfully replicated.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2448 DBNAME( 'replicationLastGl' 'replicationLastGl' ) ACCESS-CLASS normal LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2340 NAME 'ibm-replicationLastResult' DESC 'Result of last attempted replication in the form: <time><change id><resultcode> <entry-dn> ' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2340 DBNAME( 'replicationLastRe' 'replicationLastRe' ) ACCESS-CLASS system LENGTH 2048 ) attributetypes=( 1.3.18.0.2.4.2332 NAME 'ibm-replicationLastResultAdditional' DESC 'Provides any additional error information returned by the consuming server in the message component of the LDAP result' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2332 BNAME( 'replicationLastAd' 'replicationLastAd' ) ACCESS-CLASS system LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.2339 NAME 'ibm-replicationNextTime' DESC 'Indicates next scheduled time for replication' SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2339 DBNAME( 'replicationNextTi' 'replicationNextTi' ) ACCESS-CLASS system LENGTH 30 ) attributetypes=( 1.3.18.0.2.4.2333 NAME 'ibm-replicationPendingChangeCount' DESC 'Indicates the total number of pending unreplicated changes for this replication agreement' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2333 DBNAME( 'replicationPendin' 'replicationPendin' ) ACCESS-CLASS system LENGTH 12 ) attributetypes=( 1.3.18.0.2.4.2337 NAME 'ibm-replicationPendingChanges' DESC 'Unreplicated change in the form <change id><operation> <dn> where operation is ADD, DELETE, MODIFY, MODIFYDN' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2337 DBNAME( 'replicationPendch' 'replicationPendch' ) ACCESS-CLASS system LENGTH 1100 ) attributetypes=( 1.3.18.0.2.4.2336 NAME 'ibm-replicationState' DESC 'Indicates the state of the replication thread: active,ready,waiting,suspended, or full; if full, the value will indicate the amount of progress' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2336 DBNAME( 'replicationState' 'replicationState' ) ACCESS-CLASS system LENGTH 240 ) attributetypes=( 1.3.18.0.2.4.2495 NAME 'ibm-replicationThisServerIsMaster' DESC 'Indicates whether the server returning this attribute is a master server for the subtree containing this entry.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE NO-USER-MODIFICATION USAGE dSAOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2495 DBNAME( 'replThisSvrMast' 'replThisSvrMast' ) ACCESS-CLASS system LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2328 NAME 'ibm-serverId' DESC 'Advertises in the Root DSE the ibm-slapdServerId configuration setting' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE NO-USER-MODIFICATION USAGE dSAOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2328 DBNAME( 'serverId' 'serverId' ) ACCESS-CLASS system LENGTH 240 ) attributetypes=( 1.3.18.0.2.4.2374 NAME 'ibm-slapdACLCache' DESC 'Controls whether or not the server caches ACL information' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2374 DBNAME( 'ACLCache' 'ACLCache' ) ACCESS-CLASS normal LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2373 NAME 'ibm-slapdACLCacheSize' DESC 'Maximum number of entries to keep in the ACL Cache' EQUALITY 2.5.13.14 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 S SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2373 DBNAME( 'slapdACLCacheSize' 'slapdACLCacheSize' ) ACCESS-CLASS normal LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2428 NAME 'ibm-slapdAdminDN' DESC 'Bind DN for ibmslapd administrator, e.g.: cn=root' EQUALITY 2.5.13.1 ORDERING 1.3.18.0.2.4.405 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2428 DBNAME( 'slapdAdminDN' 'slapdAdminDN' ) ACCESS-CLASS critical LENGTH 1000 EQUALITY ORDERING ) attributetypes=( 1.3.18.0.2.4.2425 NAME 'ibm-slapdAdminPW' DESC 'Bind password for ibmslapd administrator.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE SAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2425 DBNAME( 'slapdAdminPW' 'slapdAdminPW' ) ACCESS-CLASS critical ) attributetypes=( 1.3.18.0.2.4.2366 NAME 'ibm-slapdAuthIntegration' DESC 'Specifies integration of LDAP administrator access with local OS users. Legal values are : 0 - do not map local OS users to LDAP administrator, 1 - map local OS users with proper authority to LDAP administrator. This is supported only on i5/OS.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2366 DBNAME( 'slapdAuthIntegrat' 'slapdAuthIntegrat' ) ACCESS-CLASS system LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2432 NAME 'ibm-slapdCLIErrors' DESC 'File path or device on ibmslapd host machine to which DB2 CLI error messages will be written. On Windows, forward slashes are allowed, and a leading slash not preceded by a drive letter is assumed to be rooted at the install directory (i.e.: /tmp/cli.errors = D:\Program Files\IBM\ldap\tmp\cli.errors).' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2432 DBNAME( 'slapdCLIErrors' 'slapdCLIErrors' ) ACCESS-CLASS normal LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.3147 NAME 'ibm-slapdCachedAttributeAutoAdjust' DESC 'Specifies if autonomic attribute caching is to be enabled.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.3147 DBNAME('slapdCachAttrAA' 'slapdCachAttrAA' ) ACCESS-CLASS normal LENGTH 5) attributetypes=( 1.3.18.0.2.4.3149 NAME 'ibm-slapdCachedAttributeAutoAdjustTime' DESC 'Time to start autonomic attribute cache processing. Values are in the form of Thhmmss where hh is hours, mm is minutes and ss is seconds, using a 24 hour clock.' EQUALITY 1.3.6.1.4.1.1466.109.114.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.3149 DBNAME('slapdCachAttrAAT' 'slapdCachAttrAAT' ) ACCESS-CLASS normal LENGTH 7) attributetypes=( 1.3.18.0.2.4.3148 NAME 'ibm-slapdCachedAttributeAutoAdjustTimeInterval' DESC 'Specifies the time interval, in hours, for autonomic attribute cache processing.' EQUALITY 2.5.13.14 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.3148 DBNAME('slapdCachAttrAAI' 'slapdCachAttrAAI' ) ACCESS-CLASS normal LENGTH 11) attributetypes=( 1.3.18.0.2.4.3116 NAME 'ibm-slapdCryptoSync' DESC 'A key stash file consistency marker string. It is queried by the server atstart up as part of a verification process to ensure that the key stash files match any data that has been two-way encrypted.' EQUALITY 2.5.13.17 SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.3116 DBNAME('CryptoSync' 'CryptoSync' ) ACCESS-CLASS system ) attributetypes=( 1.3.18.0.2.4.2369 NAME 'ibm-slapdDB2CP' DESC 'Specifies the Code Page of the directory database. 1208 is the code page for UTF-8 databases.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2369 DBNAME( 'slapdDB2CP' 'slapdDB2CP' ) ACCESS-CLASS normal LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2431 NAME 'ibm-slapdDBAlias' DESC 'The DB2 database alias.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 S INGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2431 DBNAME( 'slapdDBAlias' 'slapdDBAlias' ) ACCESS-CLASS normal L LENGTH 8 ) attributetypes=( 1.3.18.0.2.4.2417 NAME 'ibm-slapdDbConnections' DESC 'Specify the number of DB2 connections the server will dedicate to the DB2 backend. The value must be between 5 & 50 (inclusive). The ODBCCONS environment variable overrides this value. If ibm-slapdDbConnections (or ODBCCONS) is less than 5 or greater than 50, the server will use 5 or 50 respectively. Additional connections may be created for replication and change log.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2417 DBNAME( 'DbConnections' 'DbConnections' ) ACCESS-CLASS critical LENGTH 2 ) attributetypes=( 1.3.18.0.2.4.2418 NAME 'ibm-slapdDbInstance' DESC 'The DB2 database instance for this backend.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2418 DBNAME( 'slapdDbInstance' 'slapdDbInstance' ) ACCESS-CLASS critical LENGTH 8 ) attributetypes=( 1.3.18.0.2.4.2382 NAME 'ibm-slapdDbLocation' DESC 'The file system path where the backend database is located. On UNIX or Linux this is usually the home directory of the DB2INSTANCE owner (e.g.: /home/ldapdb2). On windows its just a drive specifier (e.g.: D:)' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2382 DBNAME( 'slapdDbLocation' 'slapdDbLocation' ) ACCESS-CLASS critical LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.2426 NAME 'ibm-slapdDbName' DESC 'The DB2 database name for this backend.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2426 DBNAME( 'slapdDbName' 'slapdDbName' ) ACCESS-CLASS critical LENGTH 8 ) attributetypes=( 1.3.18.0.2.4.2422 NAME 'ibm-slapdDbUserID' DESC 'The user name with which to connect to the DB2 database for this backend.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2422 DBNAME( 'slapdDbUserID' 'slapdDbUserID' ) ACCESS-CLASS critical LENGTH 8 ) attributetypes=( 1.3.18.0.2.4.2423 NAME 'ibm-slapdDbUserPW' DESC 'The userpassword with which to connect to the DB2 database for this backend.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2423 DBNAME( 'slapdDbUserPW' 'slapdDbUserPW' ) ACCESS-CLASS critical ) attributetypes=( OID TBD NAME 'ibm-slapdDerefAliases' DESC 'Maximum alias dereferencing level on search requests, regardless of any derefAliases that may have been specified on the client requests. Allowed values are "never", "find", "search" and "always".' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.3054 DBNAME( 'DerefAliases' 'DerefAliases' ) ACCESS-CLASS critical LENGTH 6) attributetypes=( 1.3.18.0.2.4.2449 NAME 'ibm-slapdDN' DESC 'This attribute is used to sort search results by the entry DN (LDAP_ENTRY.DN column in the LDAPDB2 database).' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE NO-USER-MODIFICATION USAGE dSAOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2449 DBNAME( 'LDAP_ENTRY' 'DN' ) ACCESS-CLASS system LENGTH 1000 ) attributetypes=( 1.3.18.0.2.4.3287 NAME 'ibm-slapdGroupMembersCacheBypassLimit' DESC 'Maximum number of members that can be in a group in order for the group and its members to be cached in the group members cache.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.3287 DBNAME( 'slapdGMCacheByp' 'slapdGMCacheByp' ) ACCESS-CLASS normal LENGTH 11) attributetypes=( 1.3.18.0.2.4.3297 NAME NAME 'ibm-slapdGroupMembersCacheSize' DESC 'Maximum number of group entries whose members should be cached.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.3297 DBNAME('slapdGMCacheSiz' 'slapdGMCacheSiz') ACCESS-CLASS normal LENGTH 11) attributetypes=( 1.3.18.0.2.4.2481 NAME 'ibm-supportedCapabilities' DESC 'Lists capabilities supported, but necessarily enabled, by this server.' QUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 NO-USER-MODIFICATION USAGE dSAOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2481 DBNAME( 'ibmsupportedCap' 'ibmsupportedCap' ) ACCESS-CLASS system LENGTH 100 ) attributetypes=( 1.3.18.0.2.4.2421 NAME 'ibm-slapdEnableEventNotification' DESC 'If set to FALSE, the server will reject all extended operation requests to register for event notification with the extended result LDAP_UNWILLING_TO_PERFORM.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2421 DBNAME( 'enableEvntNotify' 'enableEvntNotify') ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.xxxx NAME 'ibm-slapdEnablePersistentSearch' DESC 'If set to FALSE, the server will ignore non-critical persistent search control sent with a search request and will return LDAP_UNWILLING_TO_PERFORM for critical persistent search control sent with a search request' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.xxxx DBNAME( 'enablePersistentSearch' ) ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2372 NAME 'ibm-slapdEntryCacheSize' DESC 'Maximum number of entries to keep in the entry cache' EQUALITY 2.5.13.14 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.2372 DBNAME( 'slapdRDBMCacheSiz' 'slapdRDBMCacheSiz' ) ACCESS-CLASS normal LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2424 NAME 'ibm-slapdErrorLog' DESC 'File path or device on the ibmslapd host machine to which error messages will be written. On Windows, forward slashes are allowed, and a leading slash not preceded by a drive letter is assumed to be rooted at the install directory (i.e.: /tmp/slapd.errors = D:\Program Files\IBM\ldap\tmp\slapd.errors).' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2424 DBNAME( 'slapdErrorLog' 'slapdErrorLog' ) ACCESS-CLASS critical LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.2371 NAME 'ibm-slapdFilterCacheBypassLimit' DESC 'Search filters that match more than this number of entries will not be added to the Search Filter cache. Because the list of entry ids that matched the filter are included in this cache, this setting helps to limit memory use. A value of 0 indicates no limit.' EQUALITY 2.5.13.14 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.2371 DBNAME( 'slapdRDBMCacheByp' 'slapdRDBMCacheByp' ) ACCESS-CLASS normal LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2370 NAME 'ibm-slapdFilterCacheSize' DESC 'Specifies the maximum number of entries to keep in the Search Filter Cache.' EQUALITY 2.5.13.14 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2370 DBNAME('slapdFilterCacheS' 'slapdFilterCacheS' ) ACCESS-CLASS normal LENGTH 11) attributetypes=( 1.3.18.0.2.4.2378 NAME 'ibm-slapdIdleTimeOut' DESC 'Reserved for future use.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2378 DBNAME('SlapdIdleTimeOut' 'SlapdIdleTimeOut' ) ACCESS-CLASS critical LENGTH 11) attributetypes=( 1.3.18.0.2.4.2364 NAME 'ibm-slapdIncludeSchema' DESC 'File path on the ibmslapd host machine containing schema definitions used by the LDCF backend. Standard values are: /etc/V3.system.at /etc/V3.system.oc /etc/V3.ibm.at /etc/V3.ibm.oc /etc/V3.user.at /etc/V3.user.oc /etc/V3.ldapsyntaxes /etc/V3.matchingrules /etc/V3.modifiedschema On Windows,forward slashes are allowed, and a leading slash not preceded by a drive letter is assumed to be rooted at the install directory (i.e.: /etc/V3.system.at = D:\Program Files\IBM\ldap\etc\V3.system.at).' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.2364 DBNAME( 'slapdIncldeSchema' 'slapdIncldeSchema' ) ACCESS-CLASS critical LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.2365 NAME 'ibm-slapdIpAddress' DESC 'Specifies IP addresses the server will listen on. These can be IPv4 or IPv6 addresses. If the attribute is not specified, the server uses all IP addresses assigned to the host machine. This is supported on i5/OS only.' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2365 DBNAME('slapdIpAddress' 'slapdIpAddress' ) ACCESS-CLASS system LENGTH 32 ) attributetypes=(1.3.18.0.2.4.2420 NAME 'ibm-slapdKrbAdminDN' DESC 'Specifies the kerberos ID of the LDAP administrator (e.g. ibm-kn=name@realm). Used when kerberos authentication is used to authenticate the administrator when logged onto the Web Admin interface. This is specified instead of adminDN and adminPW.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2420 DBNAME( 'slapdKrbAdminDN' 'slapdKrbAdminDN' ) ACCESS-CLASS critical LENGTH 512 ) attributetypes=( 1.3.18.0.2.4.2394 NAME 'ibm-slapdKrbEnable' DESC 'Must be one of { TRUE | FALSE }. Specifies whether the server supports kerberos authentication.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2394 DBNAME( 'slapdKrbEnable' 'slapdKrbEnable') ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2419 NAME 'ibm-slapdKrbIdentityMap' DESC 'If set to TRUE, when a client is authenticated with a kerberos ID, the server will search for a local user with matching kerberos credentials, and add that user DN to the connections bind credentials. This allows ACLs based on LDAP user DNs to still be usable with kerberos authentication.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2419 DBNAME('KrbIdentityMap' 'KrbIdentityMap' ) ACCESS-CLASS critical LENGTH 5 ) attributetypes=(1.3.18.0.2.4.2416 NAME 'ibm-slapdKrbKeyTab' DESC 'Specifies the LDAP servers keytab file. This file contains the LDAP servers private key, as associated with its kerberos account. This file should be protected (like the servers SSL key database file). On Windows, forward slashes are allowed, and a leading slash not preceded by a drive letter (D:) is assumed to be rooted at the install directory (i.e.: /tmp/slapd.errors = D:\Program Files\IBM\ldap\tmp\slapd.errors).' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2416 DBNAME( 'slapdKrbKeyTab' 'slapdKrbKeyTab' ) ACCESS-CLASS critical LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.2400 NAME 'ibm-slapdKrbRealm' DESC 'Specifies the LDAP servers kerberos realm. Used to publish the ldapservicename attribute in the root DSE. Note that an LDAP server can serve as the repository of account information for multiple KDCs (and realms), but the LDAP server, as a kerberos server, can only be a member of a single realm.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2400 DBNAME( 'slapdKrbRealm' 'slapdKrbRealm' ) ACCESS-CLASS critical LENGTH 256 ) attributetypes=( 1.3.18.0.2.4.2415 NAME 'ibm-slapdLdapCrlHost' DESC 'Specify the hostname of the LDAP server that contains the Certificate Revocation Lists (CRLs) for validating client x.509v3 certificates. This parameter is needed when ibm-slapdSslAuth=serverclientauth AND the client certificates have been issued for CRL validation' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2415 DBNAME( 'LdapCrlHost' 'LdapCrlHost' ) ACCESS-CLASS critical LENGTH 256 ) attributetypes=( 1.3.18.0.2.4.2407 NAME 'ibm-slapdLdapCrlPassword' DESC 'Specify the password that server-side SSL will use to bind to the LDAP server that contains the Certificate Revocation Lists (CRLs) for validating client x.509v3 certificates. This parameter may be needed when ibm-slapdSslAuth=serverclientauth AND the client certificates have been issued for CRL validation. Note: If the LDAP server holding the CRLs permits unauthenticated access to the CRLs (i.e. anonymous access), then ibm-slapdLdapCrlPassword is not required.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2407 DBNAME( 'CrlPassword' 'CrlPassword' ) ACCESS-CLASS critical ) attributetypes=( 1.3.18.0.2.4.2404 NAME 'ibm-slapdLdapCrlPort' DESC 'Specify the LDAP ibm-slapdPort used by the LDAP server that contains the Certificate Revocation Lists (CRLs) for validating client x.509v3 certificates. This parameter is needed when ibm-slapdSslAuth=serverclientauth AND the client certificates have been issued for CRL validation. (IP ports are unsigned, 16-bit integers in the range 1 - 65535)' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) BMAttributetypes=( 1.3.18.0.2.4.2404 DBNAME( 'LdapCrlPort' 'LdapCrlPort' ) ACCESS-CLASS critical LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2403 NAME 'ibm-slapdLdapCrlUser' DESC 'Specify the bindDN that server-side SSL will use to bind to the LDAP server that contains the Certificate Revocation Lists (CRLs) for validating client x.509v3 certificates. This parameter may be needed when ibm-slapdSslAuth=serverclientauth AND the client certificates have been issued for CRL validation. Note: If the LDAP server holding the CRLs permits unauthenticated access to the CRLs (i.e. anonymous access), then ibm-slapdLdapCrlUser is not required.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2403 DBNAME( 'LdapCrlUser' 'LdapCrlUser' ) ACCESS-CLASS critical LENGTH 1000) attributetypes=( 1.3.18.0.2.4.2409 NAME 'ibm-slapdMasterDN' DESC 'Bind DN used by a replication supplier server. The value has to match the replicaBindDN in the credentials object associated with the replication agreement defined between the servers. When kerberos is used to authenticate to the replica, ibm-slapdMasterDN must specify the DN representation of the kerberos ID (e.g. ibm-kn=freddy@realm1). When kerberos is used, MasterServerPW is ignored.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2409 DBNAME( 'MasterDN' 'MasterDN' ) ACCESS-CLASS critical LENGTH 1000 ) attributetypes=(1.3.18.0.2.4.2411 NAME 'ibm-slapdMasterPW' DESC 'Bind password used by a replication supplier. The value has to match the replicaBindPW in the credentials object associated with the replication agreement defined between the servers. When kerberos is used, MasterServerPW is ignored.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2411 DBNAME( 'MasterPW' 'MasterPW' ) ACCESS-CLASS critical ) attributetypes=( 1.3.18.0.2.4.2401 NAME 'ibm-slapdMasterReferral' DESC 'URL of a master replica server (e.g.: ldaps://master.us.ibm.com:636)' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2401 DBNAME( 'MasterReferral' 'MasterReferral') ACCESS-CLASS critical LENGTH 256 ) attributetypes=( 1.3.18.0.2.4.2412 NAME 'ibm-slapdMaxEventsPerConnection' DESC 'Maximum number of event notifications which can be registered per connection. Minimum = 0 (unlimited) Maximum = 2,147,483,647' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2412 DBNAME( 'EventsPerCon' 'EventsPerCon' ) ACCESS-CLASS critical LENGTH 11) attributetypes=( 1.3.18.0.2.4.2405 NAME 'ibm-slapdMaxEventsTotal' DESC 'Maximum total number of event notifications which can be registered for all connections. Minimum = 0 (unlimited) Maximum = 2,147,483,647' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2405 DBNAME( 'MaxEventsTotal' 'MaxEventsTotal' ) ACCESS-CLASS critical LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2439 NAME 'ibm-slapdMaxNumOfTransactions' DESC 'Maximum number of transactions active at one time. 0 = unlimited' EQUALITY 2.5.13.29 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2439 DBNAME( 'MaxNumOfTrans' 'MaxNumOfTrans' ) ACCESS-CLASS critical LENGTH 11 EQUALITY ORDERING SUBSTR APPROX ) attributetypes=( 1.3.18.0.2.4.2385 NAME 'ibm-slapdMaxOpPerTransaction' DESC 'Maximum number of operations per transaction. Minimum = 1 Maximum = 500' EQUALITY 2.5.13.29 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2385 DBNAME( 'MaxOpPerTrans' 'MaxOpPerTrans' ) ACCESS-CLASS critical LENGTH 11 EQUALITY ORDERING APPROX ) attributetypes=( 1.3.18.0.2.4.2386 NAME 'ibm-slapdMaxTimeLimitOfTransactions' DESC 'The maximum timeout value of a pending transaction in seconds. 0 = unlimited' EQUALITY 2.5.13.29 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2386 DBNAME('MaxTimeOfTrans' 'MaxTimeOfTrans' ) ACCESS-CLASS critical LENGTH 11 EQUALITY ORDERING APPROX ) attributetypes=( 1.3.18.0.2.4.2500 NAME 'ibm-slapdMigrationInfo' DESC 'Information used to control migration of a component.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.2500 DBNAME( 'slapdMigrationInf' 'slapdMigrationInf' ) ACCESS-CLASS critical LENGTH 2048 ) attributetypes=( 1.3.18.0.2.4.2376 NAME 'ibm-slapdPagedResAllowNonAdmin' DESC 'Whether or not the server should allow non-Administrator bind for paged results requests on a search request. If the value read from the ibmslapd.conf file is TRUE, the server will process any client request,including those submitted by a user binding anonymously. If the value read from the ibmslapd.conf file is FALSE, the server will process only those client requests submitted by a user with Administrator authority. If a client requests paged results with a criticality of TRUE or FALSE for a search operation, does not have Administrator authority, and the value read from the ibmslapd.conf file for this attribute is FALSE, the server will return to the client with return code insufficientAccessRights - no searching or paging will be performed. ' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2376 DBNAME( 'SlapdPagedNonAdmn' 'SlapdPagedNonAdmn' ) ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2380 NAME 'ibm-slapdPagedResLmt' DESC 'Maximum number of outstanding paged results search requests allowed active simultaneously. Range = 0.... If a client requests a paged results operation, and a maximum number of outstanding paged results are currently active, then the server will return to the client with return code of busy - no searching or paging will be performed.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2380 DBNAME( 'SlapdPagedResLmt' 'SlapdPagedResLmt' ) ACCESS-CLASS critical LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2406 NAME 'ibm-slapdPlugin' DESC 'A plugin is a dynamically loaded library which extends the capabilities of the server. An ibm-slapdPlugin attribute specifies to the server how to load and initialize a plugin library. The syntax is: keyword filename init_function [args...]. The syntax will be slightly different for each platform due to library naming conventions.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2406 DBNAME( 'slapdPlugin' 'slapdPlugin') ACCESS-CLASS critical LENGTH 2000 ) attributetypes=( 1.3.18.0.2.4.2408 NAME 'ibm-slapdPort' DESC 'TCP/IP ibm-slapdPort used for non-SSL connections. Can not have the same value as ibm-slapdSecurePort. (IP ports are unsigned, 16-bit integers in the range 1 - 65535)' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2408 DBNAME( 'slapdPort' 'slapdPort' ) ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2402 NAME 'ibm-slapdPwEncryption' DESC 'Must be one of { none | AES128 | AES192 | AES256 |crypt | sha | ssha | md5 }. Specify the encoding mechanism for the user passwords before they are stored in the directory. Defaults to none if unspecified. If the value is set other than none, SASL digest-md5 bind will fail.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.2402 DBNAME( 'PwEncryption' 'PwEncryption' ) ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2413 NAME 'ibm-slapdReadOnly' DESC 'Must be one of { TRUE | FALSE }. Specifies whether the backend can be written to. Defaults to FALSE if unspecified. If setto TRUE, the server will return LDAP_UNWILLING_TO_PERFORM (0x35) in response to any client request which would change data in the readOnly database.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2413 DBNAME( 'ReadOnly' 'ReadOnly' ) ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2487 NAME 'ibm-slapdReferral' DESC 'Specify the referral LDAP URL to pass back when the local suffixes do not match the request. Used for superior referral (i.e. ibm-slapdSuffix is not within the servers naming context).' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2487 DBNAME( 'Referral' 'Referral' ) ACCESS-CLASS critical LENGTH 32700) attributetypes=( 1.3.18.0.2.4.2437 NAME 'ibm-slapdSchemaAdditions' DESC 'File path on the ibmslapd host machine containing additional schema definitions used by the LDCF backend. Standard values are: /etc/V3.modifiedschema On Windows, forward slashes are allowed, and a leading slash not preceded by a drive letter is assumed to be rooted at the install directory (i.e.: /etc/V3.system.at= D:\Program Files\IBM\ldap\etc\V3.system.at).' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2437 DBNAME( 'slapdSchemaAdditi' 'slapdSchemaAdditi') ACCESS-CLASS normal LENGTH 1024) attributetypes=( 1.3.18.0.2.4.2363 NAME 'ibm-slapdSchemaCheck' DESC 'Must be one of { V2 | V3 | V3_lenient}. Specifies schema checking mechanism for add/modify operation. V2 = perform LDAP v2 checking. V3 = perform LDAP v3 checking. V3_lenient = not ALL parent object classes are required. Only the immediate object class is needed when adding entries.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2363 DBNAME( 'SchemaCheck' 'SchemaCheck' ) ACCESS-CLASS critical LENGTH 10) attributetypes=( 1.3.18.0.2.4.2398 NAME 'ibm-slapdSecurePort' DESC 'TCP/IP port used for SSL connections. Can not have the same value as ibm-slapdPort. (IP ports are unsigned, 16-bit integers in the range 1 - 65535)' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2398 DBNAME( 'SecurePort' 'SecurePort' ) ACCESS-CLASS critical LENGTH 5) attributetypes=( 1.3.18.0.2.4.2399 NAME 'ibm-slapdSecurity' DESC 'Must be one of { none | SSL | SSLOnly }. Specifies types of connections accepted by the server. none - server listens on non-ssl port only. ssl - server listens on both ssl and non-ssl ports. sslonly - server listens on ssl port only.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2399 DBNAME( 'Security' 'Security' ) ACCESS-CLASS critical LENGTH 7) attributetypes=( 1.3.18.0.2.4.2397 NAME 'ibm-slapdSetenv' DESC 'Server executes putenv() for all values of ibm-slapdSetenv at startup to modify its own runtime environment. Shell variables (%PATH% or \24LANG) will not be expanded. The only current use for this attribute is to set DB2CODEPAGE=1208, which is required if using UCS-2 (Unicode) databases.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2397 DBNAME( 'slapdSetenv' 'slapdSetenv') ACCESS-CLASS critical LENGTH 2000) attributetypes=( 1.3.18.0.2.4.2396 NAME 'ibm-slapdSizeLimit' DESC 'Maximum number of entries to return from search, regardless of any sizelimit that may have been specified on the client search request. Range = 0.... If a client has passed a limit, then the smaller value of the client value and the value read from ibmslapd.conf will be used. If a client has not passed a limit and has bound as admin DN, then the limit will be considered unlimited. If the client has not passed a limit and has not bound as admin DN, then the limit will be that which was read from ibmslapd.conf file. 0 = unlimited.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2396 DBNAME( 'SizeLimit' 'SizeLimit' ) ACCESS-CLASS critical LENGTH 11) attributetypes=(1.3.18.0.2.4.2381 NAME 'ibm-slapdSortKeyLimit' DESC 'Maximum number of sort conditions (keys) that can be specified on a single search request. Range = 0.... If a client has passed a search request with more sort keys than the limit allows, and the sorted search control criticality is FALSE, then the server will honor the value read from ibmslapd.conf and ignore any sort keys encountered after the limit has been reached - searching and sorting will be performed. If a client has passed a search request with more keys than the limit allows, and the sorted search control criticality is TRUE, then the server will return to the client with return code of adminLimitExceeded - no searching or sorting will be performed.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2381 DBNAME( 'SlapdSortKeyLimit' 'SlapdSortKeyLimit' ) ACCESS-CLASS critical LENGTH 11) attributetypes=(1.3.18.0.2.4.2377 NAME 'ibm-slapdSortSrchAllowNonAdmin' DESC 'Whether or not the server should allow non-Administrator bind for sort on a search request. If the value read from the ibmslapd.conf file is TRUE, the server will process any client request, including those submitted by a user binding anonymously. If the value read from the ibmslapd.conf file is FALSE, the server will process only those client requests submitted by a user with Administrator authority. If a client requests sort with a criticality of TRUE for a search operation, does not have Administrator authority, and the value read from the ibmslapd.conf file for this attribute is FALSE, the server will return to the client with return code insufficientAccessRights - no searching or sorting will be performed.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2377 BNAME( 'SlapdSortNonAdmin' 'SlapdSortNonAdmin') ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2395 NAME 'ibm-slapdSslAuth' DESC 'Must be one of { serverauth | serverclientauth}. Specify authentication type for ssl connection. serverauth - supports server authentication at the client. serverclientauth - supports both server and client authentication.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2395 DBNAME( 'slapdSslAuth' 'slapdSslAuth') ACCESS-CLASS critical LENGTH 16) attributetypes=( 1.3.18.0.2.4.2389 NAME 'ibm-slapdSslCertificate' DESC 'Specify the label that identifies the servers Personal Certificate in the key database file. This label is specified when the servers private key and certificate are created with the ikmgui application. If ibm-slapdSslCertificate is not defined, the default private key, as defined in the key database file, is used by the LDAP server for SSL connections.' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2389 DBNAME( 'SslCertificate' 'SslCertificate' ) ACCESS-CLASS critical LENGTH 128 ) attributetypes=(1.3.18.0.2.4.2429 NAME 'ibm-slapdSslCipherSpec' ESC 'SSL Cipher Spec Value must be set to DES-56, RC2-40-MD5, RC4-128-MD5, RC4-128-SHA, RC4-40-MD5,TripleDES-168, or AES. It identifies the allowable encryption/decryption methods for establishing a SSL connection between LDAP clients and the server.' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.2429 DBNAME( 'slapdSslCipherSpe' 'slapdSslCipherSpe' ) ACCESS-CLASS normal LENGTH 30) attributetypes=( 1.3.18.0.2.4.2362 NAME 'ibm-slapdSslCipherSpecs' DESC 'This attribute is deprecated in favor of ibm-slapdSslCipherSpec. Specifies a decimal number which identifies the allowable encryption/decryption methods for establishing a SSL connection between LDAP client(s) and the server. This number represents the availability of the encryption/decryption methods supported by the LDAP server. The pre-defined Cipher values and their descriptions are: SLAPD_SSL_TRIPLE_DES_SHA_US 0x0A Triple DES encryption with a 168-bit key and a SHA-1 MAC LAPD_SSL_DES_SHA_US 0x09DES encryption with a 56-bit key and a SHA-1 MAC SLAPD_SSL_RC4_SHA_US 0x05 RC4 encryption with a 128-bit key and a SHA-1 MAC SLAPD_SSL_RC4_MD5_US 0x04 RC4 encryption with a 128-bit key and a MD5 MAC SLAPD_SSL_RC4_MD5_EXPORT 0x03 RC4 encryption with a 40-bit key and a MD5 MAC SLAPD_SSL_RC2_MD5_EXPORT 0x06 RC2 encryption with a 40-bit key and a MD5 MAC' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2362 DBNAME( 'SslCipherSpecs' 'SslCipherSpecs' ) ACCESS-CLASS critical LENGTH 11 ) attributetypes=( 1.3.18.0.2.4.2375 NAME 'ibm-slapdSSLKeyDatabase' DESC 'File path to the LDAP servers SSL key database file. This key database file is used for handling SSL connections from LDAP clients, as well as for creating secure SSL connections to replica LDAP servers. On Windows, forward slashes are allowed, and a leading slash not preceeded by a drive specifier (D:) is assumed to be rooted at the install directory (i.e.: /etc/key.kdb = D:\Program Files\IBM\ldap\etc\key.kdb).' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2375 DBNAME( 'slapdSSLKeyDataba' 'slapdSSLKeyDataba' ) ACCESS-CLASS critical LENGTH 1024) attributetypes=(1.3.18.0.2.4.2438 NAME 'ibm-slapdSSLKeyDatabasePW' DESC 'Specify the password associated with the LDAP servers SSL key database file, as specified on the ibm-slapdSslKeyDatabase parameter. If the LDAP servers key database file has an associated password stash file, then the ibm-slapdSslKeyDatabasePW parameter can be ommitted, or set to ibm-slapdSslKeyDatabasePW = none. Note: The password stash file must be located in the same directory as the key database file and it must have the same file name as the key database file, but with an extension of .sth, instead of .kdb' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2438 DBNAME( 'slapdSSLKeyDPW' 'slapdSSLKeyDPW' ) ACCESS-CLASS normal ) attributetypes=(1.3.18.0.2.4.2392 NAME 'ibm-slapdSslKeyRingFile' DESC 'file path to the LDAP servers SSL key database file. This key database file is used for handling SSL connections from LDAP clients, as well as for creating secure SSL connections to replica LDAP servers. On Windows, forward slashes are allowed, and a leading slash not preceeded by a drive specifier (D:) is assumed to be rooted at the install directory (i.e.: /etc/key.kdb = D:\Program Files\IBM\ldap\etc\key.kdb).' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2392 DBNAME( 'SslKeyRingFile' 'SslKeyRingFile' ) ACCESS-CLASS critical LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.2390 NAME 'ibm-slapdSslKeyRingFilePW' DESC 'Specify the password associated with the LDAP servers SSL key database file, as specified on the ibm-slapdSslKeyRingFile parameter. If the LDAP servers key database file has an associated password stash file, then the ibm-slapdSslKeyRingFilePW parameter can be ommitted, or set to ibm-slapdSslKeyRingFilePW = none. Note: The password stash file must be located in the same directory as the key database file and it must have the same file name as the key database file, but with an extension of .sth, instead of .kdb.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2390 DBNAME( 'SslKeyRingFilePW' 'SslKeyRingFilePW' ) ACCESS-CLASS critical ) attributetypes=( 1.3.18.0.2.4.2388 NAME 'ibm-slapdSuffix' DESC 'Specifies a naming context to be stored in this backend.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.2388 DBNAME( 'slapdSuffix' 'slapdSuffix' ) ACCESS-CLASS critical LENGTH 1000 ) attributetypes=( 1.3.18.0.2.4.2480 NAME 'ibm-slapdSupportedWebAdmVersion' DESC 'This attribute defines the earliest version of the web administration console that supports configuration of this server.' EQUALITY 2.5.13.2 ORDERING 2.5.13.3 SUBSTR 2.5.13.4 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2480 DBNAME( 'slapdSupWebAdmVer' 'slapdSupWebAdmVer') ACCESS-CLASS normal LENGTH 256 ) attributetypes=( 1.3.18.0.2.4.2393 NAME 'ibm-slapdSysLogLevel' DESC 'Must be one of { l | m | h }. Level at which debugging and operation statistics are logged in ibmslapd.log file. h - high (verbose), m - medium, l - low (terse).' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=(1.3.18.0.2.4.2393 DBNAME( 'SysLogLevel' 'SysLogLevel' ) ACCESS-CLASS critical LENGTH 1 ) attributetypes=( 1.3.18.0.2.4.2391 NAME'ibm-slapdTimeLimit' DESC 'Maximum number of number of seconds to spend on search request, regardless of any timelimit that may have been specified on the client request. Range = 0.... If a client has passed a limit, then the smaller value of the client value and the value read from ibmslapd.conf will be used. If a client has not passed a limit and has bound as admin DN, then the limit will be considered unlimited. If the client has not passed a limit and has not bound as admin DN, then the limit will be that which was read from ibmslapd.conf file. 0 = unlimited.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE USAGE directoryOperation) IBMAttributetypes=( 1.3.18.0.2.4.2391 DBNAME( 'TimeLimit' 'TimeLimit') ACCESS-CLASS critical LENGTH 11 ) attributetypes=( ibm-slapdStartupTraceEnabled-oid NAME 'ibm-slapdTraceEnabled' DESC 'Must be one of { TRUE | FALSE }. Specifies whether trace information is to be collected at server startup' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( ibm-slapdStartupTraceEnabled-oid ACCESS-CLASS normal LENGTH 5 ) attributetypes=( ibm-slapdTraceMessageLevel-oid NAME 'ibm-slapdTraceMessageLevel' DESC 'any value that would be accepable after the command line -h option, sets Debug message level' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( ibm-slapdTraceMessageLevel-oid ACCESS-CLASS normal LENGTH 16 ) attributetypes=( ibm-slapdTraceMessageLog-oid NAME 'ibm-slapdTraceMessageLog' DESC 'File path or device on ibmslapd host machine to which LDAP C API and Debug macro messages will be written. On Windows, forward slashes are allowed, and a leading slash not preceded by a drive letter is assumed to be rooted at the install directory (i.e., /tmp/tracemsg.log = C:\Program Files\IBM\ldap\tmp\tracemsg.log).' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( ibm-slapdTraceMessageLog-oid ACCESS-CLASS normal LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.2384 NAME 'ibm-slapdTransactionEnable' DESC 'If FALSE, globally disables transaction support; the server will reject all StartTransaction requests with the response LDAP_UNWILLING_TO_PERFORM.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2384 DBNAME('TransactionEnable' 'TransactionEnable' ) ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2499 NAME 'ibm-slapdUseProcessIdPW' DESC 'If set to true the server will use the user login ID associated with the ibmslapd process to connect to the database. If set to false the server will use the ibm-slapdDbUserID and ibm-slapdDbUserPW values to connect to the database.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2499 DBNAME( 'useprocidpw' 'useprocidpw' ) ACCESS-CLASS normal LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.2436 NAME 'ibm-slapdVersion' DESC 'IBM Slapd version Number' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2436 DBNAME( 'slapdVersion' 'slapdVersion' ) ACCESS-CLASS normal LENGTH 1024 ) attributetypes=( 1.3.18.0.2.4.2327 NAME 'ibm-supportedReplicationModels' DESC 'Advertises in the Root DSE the OIDs of replication models supported by the server' EQUALITY 1.3.6.1.4.1.1466.109.114.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 NO-USER-MODIFICATION USAGE dSAOperation ) IBMAttributetypes=( 1.3.18.0.2.4.2327 DBNAME( 'supportedReplicat' 'supportedReplicat' ) ACCESS-CLASS system LENGTH 240 ) attributetypes=( 1.3.18.0.2.4.470 NAME 'IBMAttributeTypes' DESC ' ' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.470 DBNAME( 'IBMAttributeTypes' 'IBMAttributeTypes' ) ACCESS-CLASS normal LENGTH 256 ) attributetypes=( 1.3.6.1.4.1.1466.101.120.16 NAME 'ldapSyntaxes' DESC 'Servers MAY use this attribute to list the syntaxes which are implemented. Each value corresponds to one syntax.' EQUALITY 2.5.13.30 SYNTAX 1.3.6.1.4.1.1466.115.121.1.54 USAGE directoryOperation ) IBMAttributetypes=( 1.3.6.1.4.1.1466.101.120.16 DBNAME( 'ldapSyntaxes' 'ldapSyntaxes' ) ACCESS-CLASS system LENGTH 256 EQUALITY ) attributetypes=( 2.5.21.4 NAME 'matchingRules' DESC 'This attribute is typically located in the subschema entry.' EQUALITY 2.5.13.30 SYNTAX 1.3.6.1.4.1.1466.115.121.1.30 USAGE directoryOperation ) IBMAttributetypes=( 2.5.21.4 DBNAME( 'matchingRules' 'matchingRules' ) ACCESS-CLASS system LENGTH 256 EQUALITY ) attributetypes=( 2.5.21.8 NAME 'matchingRuleUse' DESC 'This attribute is typically located in the subschema entry.' EQUALITY 2.5.13.30 SYNTAX 1.3.6.1.4.1.1466.115.121.1.31 USAGE directoryOperation ) IBMAttributetypes=( 2.5.21.8 DBNAME( 'matchingRuleUse' 'matchingRuleUse' ) ACCESS-CLASS system LENGTH 256 EQUALITY ) attributetypes=( 2.5.4.31 NAME 'member' DESC 'Identifies the distinguished names for each member of the group.' SUP 2.5.4.49 EQUALITY 2.5.13.1 USAGE userApplications ) IBMAttributetypes=( 2.5.4.31 DBNAME( 'member' 'member' ) ACCESS-CLASS normal LENGTH 1000 EQUALITY ) attributetypes=( 2.5.18.4 NAME 'modifiersName' DESC 'Contains the last modifier of a directory entry.' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 2.5.18.4 DBNAME( 'ldap_entry' 'modifier' ) ACCESS-CLASS system LENGTH 1000 EQUALITY ) attributetypes=( 2.5.18.2 NAME 'modifyTimestamp' DESC 'Contains the time of the last modification of the directory entry.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 2.5.18.2 DBNAME( 'ldap_entry' 'modify_Timestamp' ) ACCESS-CLASS system LENGTH 26 ) attributetypes=( 2.5.4.41 NAME 'name' DESC 'The name attribute type is the attribute supertype from which string attribute types typically used for naming may be formed. It is unlikely that values of this type itself will occur in an entry.' EQUALITY 1.3.6.1.4.1.1466.109.114.2 SUBSTR 2.5.13.4 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE userApplications ) IBMAttributetypes=( 2.5.4.41 DBNAME( 'name' 'name' ) ACCESS-CLASS normal LENGTH 32700 EQUALITY SUBSTR ) attributetypes=( 2.5.21.7 NAME 'nameForms' DESC 'This attribute is typically located in the subschema entry.' EQUALITY 2.5.13.30 SYNTAX 1.3.6.1.4.1.1466.115.121.1.35 USAGE directoryOperation ) IBMAttributetypes=( 2.5.21.7 DBNAME( 'nameForms' 'nameForms' ) ACCESS-CLASS normal LENGTH 256 EQUALITY ) attributetypes=( 1.3.6.1.4.1.1466.101.120.5 NAME 'namingContexts' DESC 'The values of this attribute correspond to naming contexts which this server masters or shadows.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 USAGE dSAOperation ) IBMAttributetypes=( 1.3.6.1.4.1.1466.101.120.5 DBNAME( 'namingContexts' 'namingContexts' ) ACCESS-CLASS normal LENGTH 1000 ) attributetypes=( 2.16.840.1.113730.3.1.11 NAME 'newSuperior' DESC 'Specifies the name of the entry that will become the immediate superior of the existing entry, when processing a modDN operation.' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE NO-USER-MODIFICATION USAGE userApplications ) IBMAttributetypes=( 2.16.840.1.113730.3.1.11 DBNAME( 'newSuperior' 'newSuperior' ) ACCESS-CLASS normal LENGTH 1000 EQUALITY APPROX ) attributetypes=( 1.3.1.1.4.1.453.16.2.103 NAME 'numSubordinates' DESC 'Counts the number of children of this entry.' EQUALITY 2.5.13.14 SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.1.1.4.1.453.16.2.103 DBNAME( 'numSubordinates' 'numSubordinates' ) ACCESS-CLASS system LENGTH 11 attributetypes=( 2.5.4.10 NAME ( 'o' 'organizationName' 'organization' ) DESC 'This attribute contains the name of an organization (organizationName).' SUP 2.5.4.41 EQUALITY 1.3.6.1.4.1.1466.109.114.2 SUBSTR 2.5.13.4 USAGE userApplications ) IBMAttributetypes=( 2.5.4.10 DBNAME( 'o' 'o' ) ACCESS-CLASS normal LENGTH 128 ) attributetypes=( 2.5.4.0 NAME 'objectClass' DESC 'The values of the objectClass attribute describe the kind of object which an entry represents.' EQUALITY 2.5.13.0 SYNTAX 1.3.6.1.4.1.1466.115.121.1.38 USAGE userApplications ) IBMAttributetypes=( 2.5.4.0 DBNAME( 'objectClass' 'objectClass' ) ACCESS-CLASS normal LENGTH 128 EQUALITY ) attributetypes=( 2.5.21.6 NAME 'objectClasses' DESC 'This attribute is typically located in the subschema entry.' EQUALITY 2.5.13.30 SYNTAX 1.3.6.1.4.1.1466.115.121.1.37 USAGE directoryOperation ) IBMAttributetypes=( 2.5.21.6 DBNAME( 'objectClasses' 'objectClasses' ) ACCESS-CLASS system LENGTH 256 EQUALITY ) attributetypes=( 1.3.18.0.2.4.289 NAME 'ownerPropagate' DESC 'Indicates whether the entryOwner applies on entry or subtree.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.289 DBNAME( 'ownerPropagate' 'ownerPropagate' ) ACCESS-CLASS restricted LENGTH 5 ) attributetypes=( 2.5.4.11 NAME ( 'ou' 'organizationalUnit' 'organizationalUnitName' ) DESC 'This attribute contains the name of an organization (organizationName).' SUP 2.5.4.41 EQUALITY 1.3.6.1.4.1.1466.109.114.2 SUBSTR 2.5.13.4 USAGE userApplications ) IBMAttributetypes=( 2.5.4.11 DBNAME( 'ou' 'ou' ) ACCESS-CLASS normal LENGTH 128 ) attributetypes=( 2.5.4.32 NAME 'owner' DESC 'Identifies the distinguished name (DN) of the person responsible for the entry.' SUP 2.5.4.49 EQUALITY 2.5.13.1 USAGE userApplications ) IBMAttributetypes=( 2.5.4.32 DBNAME( 'owner' 'owner' ) ACCESS-CLASS normal LENGTH 1000 ) attributetypes=( 1.3.18.0.2.4.290 NAME 'ownerSource' DESC 'Indicates the distinguished name of the entry whose entryOwner value is being applied to the entry.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.290 DBNAME( 'ownerSource' 'ownerSource' ) ACCESS-CLASS system LENGTH 1000 ) attributetypes=( 1.3.6.1.4.1.42.2.27.8.1.17 NAME 'pwdAccountLockedTime' DESC 'Specifies the time that the users account was locked' EQUALITY 2.5.13.27 ORDERING 2.5.13.28 SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.6.1.4.1.42.2.27.8.1.17 DBNAME( 'pwdAccLockTime' 'pwdAccLockTime' ) ACCESS-CLASS critical LENGTH 30 ) attributetypes=( 1.3.6.1.4.1.42.2.27.8.1.16 NAME 'pwdChangedTime' DESC 'Specifies the last time the entrys password was changed' EQUALITY 2.5.13.27 ORDERING 2.5.13.28 SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.6.1.4.1.42.2.27.8.1.16 DBNAME( 'pwdChangedTime' 'pwdChangedTime' ) ACCESS-CLASS critical LENGTH 30 ) attributetypes=( 1.3.6.1.4.1.42.2.27.8.1.18 NAME 'pwdExpirationWarned' DESC 'The time the user was first warned about the coming expiration of the password' EQUALITY 2.5.13.27 ORDERING 2.5.13.28 SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.6.1.4.1.42.2.27.8.1.18 DBNAME( 'pwdExpireWarned' 'pwdExpireWarned' ) ACCESS-CLASS critical LENGTH 30) attributetypes=( 1.3.6.1.4.1.42.2.27.8.1.19 NAME 'pwdFailureTime' DESC 'The timestamps of the last consecutive authentication failures' EQUALITY 2.5.13.27 ORDERING 2.5.13.28 SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 USAGE directoryOperation ) IBMAttributetypes=( 1.3.6.1.4.1.42.2.27.8.1.19 DBNAME( 'pwdFailureTime' 'pwdFailureTime' ) ACCESS-CLASS critical LENGTH 30 ) attributetypes=( 1.3.6.1.4.1.42.2.27.8.1.21 NAME 'pwdGraceUseTime' DESC 'The timestamps of the grace login once the password has expired' EQUALITY 2.5.13.27 SYNTAX 1.3.6.1.4.1.1466.115.121.1.24 USAGE directoryOperation ) IBMAttributetypes=( 1.3.6.1.4.1.42.2.27.8.1.21 DBNAME( 'pwdGraceUseTime' 'pwdGraceUseTime' ) ACCESS-CLASS critical LENGTH 30) attributetypes=( 1.3.6.1.4.1.42.2.27.8.1.20 NAME 'pwdHistory' DESC 'The history of users passwords' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=( 1.3.6.1.4.1.42.2.27.8.1.20 DBNAME( 'pwdHistory' 'pwdHistory' ) ACCESS-CLASS critical LENGTH 1024 ) attributetypes=( 1.3.6.1.4.1.42.2.27.8.1.22 NAME 'pwdReset' DESC 'Indicates that the password has been reset.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.6.1.4.1.42.2.27.8.1.22 DBNAME( 'pwdReset' 'pwdReset' ) ACCESS-CLASS critical LENGTH 5 ) attributetypes=( 1.3.18.0.2.4.299 NAME 'replicaBindDN' DESC 'Distinguished name to use on LDAP bind to the remote replica' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.299 DBNAME( 'replicaBindDN' 'replicaBindDN' ) ACCESS-CLASS critical LENGTH 1000 ) attributetypes=( 1.3.18.0.2.4.302 NAME 'replicaBindMethod' DESC 'LDAP bind type to use on LDAP bind to replica.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.302 DBNAME( 'replicaBindMethod' 'replicaBindMethod' ) ACCESS-CLASS normal LENGTH 100 ) attributetypes=( 1.3.18.0.2.4.300 NAME ( 'replicaCredentials' 'replicaBindCredentials' ) DESC 'Credentials to use on LDAP bind to the remote replica' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.300 DBNAME( 'replicaCred' 'replicaCred' ) ACCESS-CLASS critical ) attributetypes=( 1.3.18.0.2.4.298 NAME 'replicaHost' DESC 'Hostname of the remote replica' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.298 DBNAME( 'replicaHost' 'replicaHost' ) ACCESS-CLASS normal LENGTH 100 ) attributetypes=( 1.3.18.0.2.4.301 NAME 'replicaPort' DESC 'TCP/IP port that the replica server is listening on.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.301 DBNAME( 'replicaPort' 'replicaPort' ) ACCESS-CLASS normal LENGTH 10 ) attributetypes=( 1.3.18.0.2.4.304 NAME 'replicaUpdateTimeInterval' DESC 'Specifies the time between replica update transmissions from master to slave replica.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.304 DBNAME( 'replicaUpdateInt' 'replicaUpdateInt' ) ACCESS-CLASS normal LENGTH 20 ) attributetypes=( 1.3.18.0.2.4.303 NAME 'replicaUseSSL' DESC 'Signifies whether replication flows should be protected using SSL communications.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.303 DBNAME( 'replicaUseSSL' 'replicaUseSSL' ) ACCESS-CLASS normal LENGTH 10 ) attributetypes=( 2.16.840.1.113730.3.1.34 NAME 'ref' DESC 'standard Attribute' EQUALITY 2.5.13.5 SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 USAGE userApplications ) IBMAttributetypes=( 2.16.840.1.113730.3.1.34 DBNAME( 'ref' 'ref' ) ACCESS-CLASS normal LENGTH 100 ) attributetypes=( 2.5.4.34 NAME 'seeAlso' DESC 'Identifies anotherdirectory server entry that may contain information related to this entry.' SUP 2.5.4.49 EQUALITY 2.5.13.1 USAGE userApplications ) IBMAttributetypes=( 2.5.4.34 DBNAME( 'seeAlso' 'seeAlso' ) ACCESS-CLASS normal LENGTH 1000 ) attributetypes=( 2.5.18.10 NAME 'subschemaSubentry' DESC 'The value of this attribute is the name of a subschema entry in which the server makes available attributes specifying the schema.' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 2.5.18.10 DBNAME( 'subschemaSubent' 'subschemaSubent' ) ACCESS-CLASS system LENGTH 1000 EQUALITY ) attributetypes=( 1.3.18.0.2.4.819 NAME 'subtreeSpecification' DESC 'Identifies a collection of entries that are located at the vertices of a single subtree.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE NO-USER-MODIFICATION USAGE directoryOperation ) IBMAttributetypes=( 1.3.18.0.2.4.819 DBNAME( 'subtreeSpec' 'subtreeSpec' ) ACCESS-CLASS system LENGTH 2024 ) attributetypes=( 1.3.6.1.4.1.1466.101.120.7 NAME 'supportedExtension' DESC 'The values of this attribute are OBJECT IDENTIFIERs identifying the supported extended operations which the server supports.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.38 USAGE dSAOperation ) IBMAttributetypes=( 1.3.6.1.4.1.1466.101.120.7 DBNAME( 'supportedExtensio' 'supportedExtensio' ) ACCESS-CLASS normal LENGTH 256 ) attributetypes=( 1.3.6.1.4.1.1466.101.120.15 NAME 'supportedLDAPVersion' DESC 'The values of this attribute are the versions of the LDAP protocol which the server implements.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 USAGE dSAOperation ) IBMAttributetypes=( 1.3.6.1.4.1.1466.101.120.15 DBNAME( 'supportedLDAPVers' 'supportedLDAPVers' ) ACCESS-CLASS normal LENGTH 11 ) attributetypes=( 1.3.6.1.4.1.1466.101.120.14 NAME 'supportedSASLMechanisms' DESC 'The values of this attribute are the names of supported SASL mechanisms which the server supports.' EQUALITY 2.5.13.2 SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 USAGE dSAOperation ) IBMAttributetypes=( 1.3.6.1.4.1.1466.101.120.14 DBNAME( 'supportedSASLMech' 'supportedSASLMech' ) ACCESS-CLASS normal LENGTH 2048) attributetypes=( 2.16.840.1.113730.3.1.6 NAME 'targetDN' DESC 'Defines the distinguished name of an entry that was added, modified, or deleted on a supplier server. In the case of a modrdn operation, the targetDn contains the distinguished name of the entry before it was modified.' EQUALITY 2.5.13.1 SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE NO-USER-MODIFICATION USAGE userApplications ) IBMAttributetypes=( 2.16.840.1.113730.3.1.6 DBNAME( 'targetDN' 'targetDN' ) ACCESS-CLASS normal LENGTH 1000 EQUALITY APPROX)
[ Top of Page | Previous Page | Next Page | Contents | Index ]