Modifying a connection from the CICS adapter control panels

From the initial panel:

1. Select Connection from the menu bar.

2. Select the Modify action from the pull-down menu.

3. Use the Modification Options secondary parameter window to specify the option you require.

   To change the trace number:

   • Enter 4 in the options selection field

   • Enter a number, in the range zero through 199, in the trace number field. Do not change the 4 in the options selection field before you press Enter. If you do, the trace number is not changed.

4. Press Enter to confirm your choice.

5. Repeat steps 1 through 4, as required.

Figure 18. Modifying a connection

    Connection        CKTI        Task
 +--------------------+--------------------------------------------------------
 | Select an action.  |CS Adapter Control -- Initial panel
 |                    |
 | 3 1. Start...      |sing Tab key. Then press Enter.
 |   2. Stop...       |
 |   3. Modify...     |  +--------------------------------+
 |   4. Display       |  |      Modification Options      |
 |                    |  |                                |
 +--------------------+  | Select modify option. Then     |
 | F1=Help F12=Cancel |  | press Enter.                   | 
 +--------------------+  |                                |
                         | 4 1. Reset statistics          | 
                         |   2. Enable API Exit           | 
                         |   3. Disable API Exit          | 
                         |   4. Change Trace Number 123   | 
                         +--------------------------------+
 IBM WebSphere MQ for z/O| F1=Help  F12=Cancel            |
                         +--------------------------------+
 
 
 
 F1=Help  F3=Exit