CICS adapter trace entries

CICS adapter" /> CICS adapter trace entries

Appendix C. CICS adapter trace entries

The CICS trace entry for these values is AP0
xxx (where xxx is the hexadecimal equivalent of the trace number you specified when the CICS adapter was enabled). These trace entries are all issued by CSQCTRUE, except CSQCTEST, which is issued by CSQCRST and CSQCDSP.
Table 20. CICS adapter trace entries

Name Description Trace sequence Trace data

CSQCABNT Abnormal termination Before issuing END_THREAD ABNORMAL to WebSphere MQ. This is due to the end of the task and therefore an implicit backout could be performed by the application. A ROLLBACK request is included in the END_THREAD call in this case. Unit of work information. We can use this information when finding out about the status of work. (For example, it can be verified against the output produced by the DISPLAY THREAD command, or the log print utility.)
CSQCAUID Bridge security Before validating bridge user password or PassTicket. User ID.
CSQCBACK Syncpoint backout Before issuing BACKOUT to WebSphere MQ. This is due to an explicit backout request from the application. Unit of work information.
CSQCCONX MQCONNX Before issuing MQCONNX to WebSphere MQ. Connection tag.
CSQCCCRC Completion code and reason code After unsuccessful return from API call. Completion code and reason code.
CSQCCOMM Syncpoint commit Before issuing COMMIT to WebSphere MQ. This can be due to a single-phase commit request or the second phase of a two-phase commit request. The request is due to a explicit syncpoint request from the application. Unit of work information.
CSQCDCFF IBM use only
CSQCDCIN IBM use only
CSQCDCOT IBM use only
CSQCEXER Execute resolve Before issuing EXECUTE_RESOLVE to WebSphere MQ. The unit of work information of the unit of work issuing the EXECUTE_RESOLVE. This is the last in-doubt unit of work in the resynchronization process.
CSQCGETW GET wait Before issuing CICS wait. Address of the ECB to be waited on.
CSQCGMGD GET message data After successful return from MQGET. Up to 40 bytes of the message data.
CSQCGMGH GET message handle Before issuing MQGET to WebSphere MQ. Object handle.
CSQCGMGI Get message ID After successful return from MQGET. Message ID and correlation ID of the message.
CSQCHCER Hconn error Before issuing any MQ verb. Connection handle.
CSQCINDL In-doubt list After successful return from the second INQUIRE_INDOUBT. The in-doubt units of work list.
CSQCINDO IBM use only
CSQCINDS In-doubt list size After successful return from the first INQUIRE_INDOUBT and the in-doubt list is not empty. Length of the list; divided by 64 gives the number of in-doubt units of work.
CSQCINDW Syncpoint in doubt During syncpoint processing, CICS is in doubt as to the disposition of the unit of work. Unit of work information.
CSQCINQH INQ handle Before issuing MQINQ to WebSphere MQ. Object handle.
CSQCLOSH CLOSE handle Before issuing MQCLOSE to WebSphere MQ. Object handle.
CSQCLOST Disposition lost During the resynchronization process, CICS informs the adapter that it has been cold started so no disposition information regarding the unit of work being resynchronized is available. Unit of work ID known to CICS for the unit of work being resynchronized.
CSQCNIND Disposition not in doubt During the resynchronization process, CICS informs the adapter that the unit of work being resynchronized should not have been in doubt (that is, perhaps it is still running). Unit of work ID known to CICS for the unit of work being resynchronized.
CSQCNORT Normal termination Before issuing END_THREAD NORMAL to WebSphere MQ. This is due to the end of the task and therefore an implicit syncpoint commit might be performed by the application. A COMMIT request is included in the END_THREAD call in this case. Unit of work information.
CSQCOPNH OPEN handle After successful return from MQOPEN. Object handle.
CSQCOPNO OPEN object Before issuing MQOPEN to WebSphere MQ. Object name.
CSQCPMGD PUT message data Before issuing MQPUT to WebSphere MQ. Up to 40 bytes of the message data.
CSQCPMGH PUT message handle Before issuing MQPUT to WebSphere MQ. Object handle.
CSQCPMGI PUT message ID After successful MQPUT from WebSphere MQ. Message ID and correlation ID of the message.
CSQCPREP Syncpoint prepare Before issuing PREPARE to WebSphere MQ in the first phase of two-phase commit processing. This call can also be issued from the distributed queuing component as an API call. Unit of work information.
CSQCP1MD PUTONE message data Before issuing MQPUT1 to WebSphere MQ. Up to 40 bytes of data of the message.
CSQCP1MI PUTONE message ID After successful return from MQPUT1. Message ID and correlation ID of the message.
CSQCP1ON PUTONE object name Before issuing MQPUT1 to WebSphere MQ. Object name.
CSQCRBAK Resolved backout Before issuing RESOLVE_ROLLBACK to WebSphere MQ. Unit of work information.
CSQCRCMT Resolved commit Before issuing RESOLVE_COMMIT to WebSphere MQ. Unit of work information.
CSQCRMIR RMI response Before returning to the CICS RMI (resource manager interface) from a specific invocation. Architected RMI response value. Its meaning depends of the type of the invocation. To determine the type of invocation, look at previous trace entries produced by the CICS RMI component.
CSQCRSYN Resync Before the resynchronization process starts for the task. Unit of work ID known to CICS for the unit of work being resynchronized.
CSQCSETH SET handle Before issuing MQSET to WebSphere MQ. Object handle.
CSQCTASE IBM use only
CSQCTEST Trace test Used in EXEC CICS ENTER TRACE call to verify the trace number supplied by the user or the trace status of the connection. No data.

Name	Description	Trace sequence	Trace data
CSQCABNT	Abnormal termination	Before issuing END_THREAD ABNORMAL to WebSphere MQ. This is due to the end of the task and therefore an implicit backout could be performed by the application. A ROLLBACK request is included in the END_THREAD call in this case.	Unit of work information. We can use this information when finding out about the status of work. (For example, it can be verified against the output produced by the DISPLAY THREAD command, or the log print utility.)
CSQCAUID	Bridge security	Before validating bridge user password or PassTicket.	User ID.
CSQCBACK	Syncpoint backout	Before issuing BACKOUT to WebSphere MQ. This is due to an explicit backout request from the application.	Unit of work information.
CSQCCONX	MQCONNX	Before issuing MQCONNX to WebSphere MQ.	Connection tag.
CSQCCCRC	Completion code and reason code	After unsuccessful return from API call.	Completion code and reason code.
CSQCCOMM	Syncpoint commit	Before issuing COMMIT to WebSphere MQ. This can be due to a single-phase commit request or the second phase of a two-phase commit request. The request is due to a explicit syncpoint request from the application.	Unit of work information.
CSQCDCFF	IBM use only
CSQCDCIN	IBM use only
CSQCDCOT	IBM use only
CSQCEXER	Execute resolve	Before issuing EXECUTE_RESOLVE to WebSphere MQ.	The unit of work information of the unit of work issuing the EXECUTE_RESOLVE. This is the last in-doubt unit of work in the resynchronization process.
CSQCGETW	GET wait	Before issuing CICS wait.	Address of the ECB to be waited on.
CSQCGMGD	GET message data	After successful return from MQGET.	Up to 40 bytes of the message data.
CSQCGMGH	GET message handle	Before issuing MQGET to WebSphere MQ.	Object handle.
CSQCGMGI	Get message ID	After successful return from MQGET.	Message ID and correlation ID of the message.
CSQCHCER	Hconn error	Before issuing any MQ verb.	Connection handle.
CSQCINDL	In-doubt list	After successful return from the second INQUIRE_INDOUBT.	The in-doubt units of work list.
CSQCINDO	IBM use only
CSQCINDS	In-doubt list size	After successful return from the first INQUIRE_INDOUBT and the in-doubt list is not empty.	Length of the list; divided by 64 gives the number of in-doubt units of work.
CSQCINDW	Syncpoint in doubt	During syncpoint processing, CICS is in doubt as to the disposition of the unit of work.	Unit of work information.
CSQCINQH	INQ handle	Before issuing MQINQ to WebSphere MQ.	Object handle.
CSQCLOSH	CLOSE handle	Before issuing MQCLOSE to WebSphere MQ.	Object handle.
CSQCLOST	Disposition lost	During the resynchronization process, CICS informs the adapter that it has been cold started so no disposition information regarding the unit of work being resynchronized is available.	Unit of work ID known to CICS for the unit of work being resynchronized.
CSQCNIND	Disposition not in doubt	During the resynchronization process, CICS informs the adapter that the unit of work being resynchronized should not have been in doubt (that is, perhaps it is still running).	Unit of work ID known to CICS for the unit of work being resynchronized.
CSQCNORT	Normal termination	Before issuing END_THREAD NORMAL to WebSphere MQ. This is due to the end of the task and therefore an implicit syncpoint commit might be performed by the application. A COMMIT request is included in the END_THREAD call in this case.	Unit of work information.
CSQCOPNH	OPEN handle	After successful return from MQOPEN.	Object handle.
CSQCOPNO	OPEN object	Before issuing MQOPEN to WebSphere MQ.	Object name.
CSQCPMGD	PUT message data	Before issuing MQPUT to WebSphere MQ.	Up to 40 bytes of the message data.
CSQCPMGH	PUT message handle	Before issuing MQPUT to WebSphere MQ.	Object handle.
CSQCPMGI	PUT message ID	After successful MQPUT from WebSphere MQ.	Message ID and correlation ID of the message.
CSQCPREP	Syncpoint prepare	Before issuing PREPARE to WebSphere MQ in the first phase of two-phase commit processing. This call can also be issued from the distributed queuing component as an API call.	Unit of work information.
CSQCP1MD	PUTONE message data	Before issuing MQPUT1 to WebSphere MQ.	Up to 40 bytes of data of the message.
CSQCP1MI	PUTONE message ID	After successful return from MQPUT1.	Message ID and correlation ID of the message.
CSQCP1ON	PUTONE object name	Before issuing MQPUT1 to WebSphere MQ.	Object name.
CSQCRBAK	Resolved backout	Before issuing RESOLVE_ROLLBACK to WebSphere MQ.	Unit of work information.
CSQCRCMT	Resolved commit	Before issuing RESOLVE_COMMIT to WebSphere MQ.	Unit of work information.
CSQCRMIR	RMI response	Before returning to the CICS RMI (resource manager interface) from a specific invocation.	Architected RMI response value. Its meaning depends of the type of the invocation. To determine the type of invocation, look at previous trace entries produced by the CICS RMI component.
CSQCRSYN	Resync	Before the resynchronization process starts for the task.	Unit of work ID known to CICS for the unit of work being resynchronized.
CSQCSETH	SET handle	Before issuing MQSET to WebSphere MQ.	Object handle.
CSQCTASE	IBM use only
CSQCTEST	Trace test	Used in EXEC CICS ENTER TRACE call to verify the trace number supplied by the user or the trace status of the connection.	No data.