Security manager codes (X'C8')

 

If a security manager reason code occurs that is not listed here, an internal error has occurred. Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80001
Explanation:

An attempt to obtain storage for the security manager was unsuccessful.

Note:
This could indicate a system-wide storage problem.
System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Check that you are running with the recommended region size, and if not, reset your system and restart the queue manager. If this is not the cause of the problem, use these items to diagnose the cause of the problem:

  • Queue manager job log

  • Information about any other storage-related problems

  • System dump resulting from the error

00C80002
Explanation:

An attempt to obtain storage for the security manager was unsuccessful.

Note:
This could indicate a system-wide storage problem.
System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Check that you are running with the recommended region size, and if not, reset your system and restart the queue manager. If this is not the cause of the problem, use these items to diagnose the cause of the problem:

  • Queue manager job log

  • Information about any other storage-related problems

  • System dump resulting from the error

00C80003
Explanation:

An attempt to obtain a storage subpool for the security manager was unsuccessful.

Note:
This could indicate a system-wide storage problem.
System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Check that you are running with the recommended region size, and if not, reset your system and restart the queue manager. If this is not the cause of the problem, use these items to diagnose the cause of the problem:

  • Queue manager job log

  • Information about any other storage-related problems

  • System dump resulting from the error

00C80004
Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated, and a dump is produced.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C8000A
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the external security manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C8000B
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the external security manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C8000C
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the external security manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C8000D
Explanation:

An unexpected return code has been received from one of the following SAF calls to the external security manager (ESM) during security switch processing at queue manager initialization time:

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=LIST

  • RACROUTE REQUEST=STAT

System Action:

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System Programmer Response:

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C8000E
Explanation:

An unexpected setting for the subsystem security switch was encountered.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

00C8000F
Explanation:

An internal error has occurred.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class involved at the time of the error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C80010
Explanation:

An attempt to obtain storage for the security manager was unsuccessful.

Note:
This could indicate a system-wide storage problem.
System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Check that you are running with the recommended region size, and if not, reset your system and restart the queue manager. If this is not the cause of the problem, use the items listed in Security manager problem determination, together with information about any other storage-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80011
Explanation:

An attempt to obtain a storage subpool for the security manager was unsuccessful.

Note:
This could indicate a system-wide storage problem.
System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Check that you are running with the recommended region size, and if not, reset your system and restart the queue manager. If this is not the cause of the problem, use the items listed in Security manager problem determination, together with information about any other storage-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80012
Explanation:

An attempt to obtain storage for the security manager was unsuccessful.

Note:
This could indicate a system-wide storage problem.
System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Check that you are running with the recommended region size, and if not, reset your system and restart the queue manager. If this is not the cause of the problem, use the items listed in Security manager problem determination, together with information about any other storage-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80013
Explanation:

An internal error has occurred while processing a security request.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80020
Explanation:

An attempt to obtain storage for the security manager was unsuccessful.

Note:
This could indicate a system-wide storage problem.
System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Check that you are running with the recommended region size, and if not, reset your system and restart the queue manager. If this is not the cause of the problem, use the items listed in Security manager problem determination, together with information about any other storage-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80024
Explanation:

An internal error has occurred while processing a command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80025
Explanation:

An internal error has occurred while processing a command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80026
Explanation:

An internal error has occurred while processing a command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80027
Explanation:

An unrecognized keyword was encountered whilst processing a REFRESH SECURITY command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the keyword causing the problem.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80028
Explanation:

An attempt to obtain a storage subpool for the security manager was unsuccessful. This might have occurred during the processing of an ALTER SECURITY command, a REFRESH SECURITY command, or during the automatic security timeout processing.

Note:
This could indicate a system-wide storage problem.
System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Use the items listed in Security manager problem determination, together with information about any other storage-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80029
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the external security manager (ESM) during security switch processing for a REFRESH SECURITY command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80031
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the external security manager (ESM) during the processing for a REFRESH SECURITY command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80032
Explanation:

An unexpected return code has been received from one of the following SAF calls to the external security manager (ESM) during the processing of a REFRESH SECURITY command:

  • RACROUTE REQUEST=LIST (create)

  • RACROUTE REQUEST=LIST (delete)

  • RACROUTE REQUEST=STAT

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the return codes from SAF, and the ESM.

Note:
If the error occurred on a STAT call, the error is preceded by a CSQH004I message containing the return codes from SAF, and the ESM.
System Programmer Response:

See your ESM documentation for information about the return codes from SAF and the ESM. See the WebSphere MQ for z/OS System Setup Guide information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80033
Explanation:

An unexpected setting for the subsystem security switch was encountered during the processing of a REFRESH SECURITY command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

00C80034
Explanation:

An internal error has occurred.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class invoked at the time of the check.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80035
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the external security manager (ESM) during security switch processing for a REFRESH SECURITY command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80036
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the external security manager (ESM) during security switch processing for a REFRESH SECURITY command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80037
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the external security manager (ESM) during the processing for a REFRESH SECURITY command.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80038
Explanation:

An unexpected return code has been received from one of the following SAF calls to the external security manager (ESM) during the processing of a REFRESH SECURITY command.

  • RACROUTE REQUEST=LIST (create)

  • RACROUTE REQUEST=LIST (delete)

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=STAT

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the address of the return codes from SAF, and the ESM.

Note:
If the error occurred on a STAT call, the error is preceded by a CSQH004I message containing the return codes from SAF, and the ESM.
System Programmer Response:

See your ESM documentation for information about the return codes from SAF and the ESM. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80039
Explanation:

An attempt to obtain a storage subpool for a security manager user entry block was unsuccessful. This could have occurred during either security timeout processing, or REFRESH SECURITY command processing.

Note:
This could indicate a system-wide storage problem.
System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the storage failure.

System Programmer Response:

Use the items listed in Security manager problem determination, together with information about any other storage-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80040
Explanation:

A severe error has occurred during security timeout processing. An unexpected return code has been received from the MQ timer component.

Note:
This could indicate a system-wide problem with the timer component, or the system timer.
System Action:

Messages CSQH009I and CSQH010I are issued. The current execution unit terminates with a completion code of X'5C6', and a dump is produced. Register 2 contains the return code from the timer component that caused the problem.

System Programmer Response:

Use the items listed in Security manager problem determination, together with information about any other timer-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80041
Explanation:

A severe error has occurred during security timeout processing for an ALTER SECURITY command. An unexpected return code has been received from the MQ timer component.

Note:
This could indicate a system-wide problem with the timer component, or the system timer.
System Action:

Message CSQH010I is issued. The current execution unit terminates with a completion code of X'5C6' and a dump is produced. Register 2 contains the return code from the timer component that caused the problem.

System Programmer Response:

Use the items listed in Security manager problem determination, together with information about any other timer-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80042
Explanation:

A severe error has occurred during security initialization when trying to start the security timer. An unexpected return code has been received from the MQ timer component.

Note:
This could indicate a system-wide problem with the timer component, or the system timer.
System Action:

Message CSQH010I is issued. The queue manager terminates and a dump is produced. Register 2 contains the return code from the timer component that caused the problem.

System Programmer Response:

Use the items listed in Security manager problem determination, together with information about any other timer-related problems, to diagnose the cause of the problem. If you are unable to resolve the problem, contact your IBM support center.

00C80043
Explanation:

A severe error has occurred whilst processing a DISPLAY SECURITY command. A parameter has been entered on the SECURITY keyword, but this is invalid.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80044
Explanation:

A severe error has occurred whilst processing an ALTER SECURITY command. A parameter has been entered on the SECURITY keyword, but this is invalid.

System Action:

The current execution unit terminates with a completion code of X'5C6', and a dump is produced.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

00C80045
Explanation:

A severe error has occurred because the last security refresh did not complete successfully.

System Action:

The current execution unit terminates with error reason code X'5C6', and a dump is produced.

System Programmer Response:

If you are able to fix the cause of the problem, refresh the security again before we can continue. If you are unable to solve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80046
Explanation:

An attempt to obtain a storage subpool for the security manager Utoken blocks was unsuccessful.

This indicates that there could be a wider ranging problem relating to storage availability.

System Action:

The queue manager is terminated and a dump is produced.

System Programmer Response:

Use the items listed in Security manager problem determination, together with information about any other storage-related problems, to diagnose the cause of the problem.

00C80047
Explanation:

An attempt to obtain a storage block for a security manager Utoken block was unsuccessful.

This indicates that there could be a wider ranging problem relating to storage availability.

System Action:

The current execution unit terminates with X'5C6' and a dump is produced.

System Programmer Response:

Use the items listed in Security manager problem determination, together with information about any other storage-related problems, to diagnose the cause of the problem. Contact your IBM support center if we need help.

00C80050
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80051
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80052
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80053
Explanation:

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=LIST

  • RACROUTE REQUEST=STAT

System Action:

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System Programmer Response:

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80054
Explanation:

An unexpected setting for the subsystem security switch was encountered.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80055
Explanation:

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C80060
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80061
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80062
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80063
Explanation:

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=LIST

  • RACROUTE REQUEST=STAT

System Action:

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System Programmer Response:

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80064
Explanation:

An unexpected setting for the subsystem security switch was encountered.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80065
Explanation:

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C80070
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80071
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80072
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80073
Explanation:

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=LIST

  • RACROUTE REQUEST=STAT

System Action:

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System Programmer Response:

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80074
Explanation:

An unexpected setting for the subsystem security switch was encountered.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

00C80075
Explanation:

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C80080
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80081
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80082
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80083
Explanation:

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=LIST

  • RACROUTE REQUEST=STAT

System Action:

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System Programmer Response:

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80084
Explanation:

An unexpected setting for the subsystem security switch was encountered.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

00C80090
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80091
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80092
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80093
Explanation:

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=LIST

  • RACROUTE REQUEST=STAT

System Action:

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System Programmer Response:

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80094
Explanation:

An unexpected setting for the subsystem security switch was encountered.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80095
Explanation:

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C80100
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80101
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80102
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80103
Explanation:

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=LIST

  • RACROUTE REQUEST=STAT

System Action:

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System Programmer Response:

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80104
Explanation:

An unexpected setting for the subsystem security switch was encountered.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80105
Explanation:

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C80200
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=STAT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. Check your security configuration (for example, that the required classes are installed and active). If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80201
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=EXTRACT call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the entity being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80202
Explanation:

A severe error has occurred during a SAF RACROUTE REQUEST=LIST (create) call to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class, and register 3 the address of the entity, being checked at the time of the error.

System Programmer Response:

See your ESM documentation for information about any return codes that appear in the job log. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80203
Explanation:

An unexpected return code has been received from one of the following SAF calls to the External Security Manager (ESM) during security switch processing at queue manager initialization time.

  • RACROUTE REQUEST=EXTRACT

  • RACROUTE REQUEST=LIST

  • RACROUTE REQUEST=STAT

System Action:

Message CSQH004I is produced containing the return codes from SAF and the ESM. The queue manager is terminated, and a dump is produced. Register 2 contains the address of the return codes.

System Programmer Response:

See your ESM documentation for information about the return codes that appear in message CSQH004I (in the job log) or the dump. See the WebSphere MQ for z/OS System Setup Guide for information about setting MQ security switches. If you are unable to resolve the problem, collect the items listed in Security manager problem determination and contact your IBM support center.

00C80204
Explanation:

An unexpected setting for the subsystem security switch was encountered.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the control block containing the switch setting.

System Programmer Response:

Collect the items listed in Security manager problem determination, together with a note of what you expected the switch to be set to, and whether you had defined a profile for it or not, and contact your IBM support center.

Restart the queue manager.

00C80205
Explanation:

An internal loop count was exceeded during security switch processing at queue manager initialization time.

System Action:

The queue manager is terminated, and a dump is produced. Register 2 contains the address of the class being checked at the time of the error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C80206
Explanation:

An unexpected setting for the request type was encountered on an authentication request.

System Action:

The current execution unit terminates with a completion code of X'5C6' and a dump is produced. Register 2 contains the request type in error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C80207
Explanation:

An unexpected setting for the request type was encountered on an authentication request.

System Action:

The queue manager terminates and a dump is produced. Register 2 contains the request type in error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

Restart the queue manager.

00C81000
Explanation:

A severe error has occurred while processing a REFRESH SECURITY command.

System Action:

The current execution unit terminates with error reason code X'5C6', and a dump is produced. Register 2 contains the address of the control block involved in the error.

System Programmer Response:

Collect the items listed in Security manager problem determination and contact your IBM support center.

 

Security manager problem determination

Collect the following diagnostic items:

  • A description of the action(s) that led to the error, or if applicable, a listing of the application program, or the input string to a utility program, being run at the time of the error

  • Console output for the period leading up to the error

  • Queue manager job log

  • The MQ active log data set

  • System dump resulting from the error

  • CICS transaction dump output, if using CICS

  • The WebSphere MQ, z/OS, DB2, CICS, and IMS service levels

  • The SECURITY command issued prior to the error