CTGDJZ001I
Simple XML Parser will request validating Parser.
Explanation:
This is an informational message only.
CTGDJZ002I
Simple XML Parser will request namespace aware Parser.
Explanation:
This is an informational message only.
CTGDJZ003I
Simple XML Parser will not indent output.
Explanation:
This is an informational message only.
CTGDJZ004I
Simple XML Parser turned off Deferred DOM.
Explanation:
This is an informational message only.
CTGDJZ005I
Simple XML Parser could not turned off Deferred DOM.
Explanation:
This is an informational message only.
CTGDJZ006E
Failed to read XML because input stream was not found. The input or output modes of the Simple XML Parser may not be valid.
Explanation:
See message.
Operator response:
Check the input and output modes of the Simple XML Parser.
CTGDJZ007E
Failed to write XML because output stream was not found. The input or output modes of the Simple XML Parser may not be valid.
Explanation:
See message.
Operator response:
Check the input and output modes of the Simple XML Parser.
CTGDJZ008I
Initializing XML Input Document.
Explanation:
This is an informational message only.
CTGDJZ009I
Initializing XML Output Document.
Explanation:
This is an informational message only.
CTGDJZ010I
The XML document has no children. The top level tag name in the document is ''tag name''.
Explanation:
This is an informational message only.
CTGDJZ011I
The XML document has ''number of children'' children.
Explanation:
This is an informational message only.
CTGDJZ012E
Simple XML Parser failed to initialize because XML document read in has no document root.
Explanation:
The Simple XML Parser can only parse XML documents that have a document root.
Operator response:
Verify that the XML document being read has a document root.
CTGDJZ013E
Expected child item at index ''index number''.
Explanation:
The node for this index is null.
Operator response:
Check the content of XML file.
CTGDJZ014I
The XML Child node has no children so its being skipped.
Explanation:
This is an informational message only.
CTGDJZ015W
SAX Parse Warning:
line:line number, uri:uri, message:message.
Explanation:
See message.
Operator response:
CTGDJZ101I
XML SAX Parser thread running.
Explanation:
This is an informational message only.
CTGDJZ102E
XML SAX Parser only supports input.
Explanation:
XML SAX Parser does not write, for now only reading is accepted.
Operator response:
Use XML SAX Parser for reading and parsing only.
CTGDJZ103E
There is no input stream provided to XML SAX Parser.
Explanation:
The initialization of SaxContentHandler thread fails.
Operator response:
Check the input stream (file).
CTGDJZ104E
The XML SAX Parser parameter Read Timeout value has to be a positive number.
Explanation:
See message.
Operator response:
Enter a positive number for the read timeout parameter.
CTGDJZ105E
The XML SAX Parser parameter Read Timeout value has to be number.
Explanation:
See message.
Operator response:
Type in a positive number read timeout parameter.
CTGDJZ106E
Unable to read the Entry. Exception exception class occurred: exception
Explanation:
An InterruptedException is encountered when the method readEntry is trying to read the next entry in the XML document.
Operator response:
No action is required.
CTGDJZ107E
Exceeded the stipulated wait period.
Explanation:
There was no entry in the queue during the stipulated wait period.
Operator response:
No action is required.
CTGDJZ108E
The Entry from the queue is a message.class = class name, message = message.
Explanation:
The next message from the queue is an instance of the class Exception.
Operator response:
Analyse the exception.
CTGDJZ109E
The method WriteEntry is not supported by the XML SAX Parser.
Explanation:
See message.
Operator response:
Use XML SAX parser only for reading and parsing.
CTGDJZ110I
XML SAX Parser terminated.
Explanation:
This is an informational message only.
CTGDJZ111I
Inside the isGroupTag method: tag=tag, groupTag=group tag.
Explanation:
This is an informational message only.
CTGDJZ112I
Inside the characters method: string.
Explanation:
This is an informational message only.
CTGDJZ114I
The method endDocument is invoked.
Explanation:
This is an informational message only.
CTGDJZ115E
XMLSAX Parser encountered an InterruptedException in the endDocument method while trying to receive notification of the end of the document: exception
Explanation:
See message.
Operator response:
No action is required.
CTGDJZ116I
Inside the endElement method: queue name.
Explanation:
This is an informational message only.
CTGDJZ117I
Inside the endPrefixMapping method: prefix.
Explanation:
This is an informational message only.
CTGDJZ118I
Inside the ignorableWhitespace method: length=length.
Explanation:
This is an informational message only.
CTGDJZ119I
Inside the processingInstruction method.
Explanation:
This is an informational message only.
CTGDJZ120I
Inside the setDocumentLocator method.
Explanation:
This is an informational message only.
CTGDJZ121I
Inside the skippedEntity method.
Explanation:
This is an informational message only.
CTGDJZ122I
Inside the startDocument method.
Explanation:
This is an informational message only.
CTGDJZ123I
Inside the startElement method: local name=local name, queue name=queue name.
Explanation:
This is an informational message only.
CTGDJZ124E
The method startElement encountered an InterruptedException: exception
Explanation:
An InterruptedException is encountered when the method startElement is trying to receive notification of the start of an element.
Operator response:
No action is required.
CTGDJZ125I
Inside the startPrefixMapping method: prefix=prefix, uri=uri.
Explanation:
This is an informational message only.
CTGDJZ126I
Inside the fatalError method: exception
Explanation:
This is an informational message only.
CTGDJZ127I
Inside the error method.
Explanation:
This is an informational message only.
CTGDJZ128I
SAX Parse Warning:
line:line number, ID:ID.
Explanation:
This is an informational message only.
CTGDJZ201I
Parser will request namespace aware Parser.
Explanation:
This is an informational message only.
CTGDJZ202I
Parser will request validating Parser.
Explanation:
This is an informational message only.
CTGDJZ203I
Parser will not indent output.
Explanation:
This is an informational message only.
CTGDJZ204E
No output XSL file specified.
Explanation:
There is no output XSL file to transform internal format to the original format.
Operator response:
Specify the output XSL file parameter.
CTGDJZ205E
Trying to write XML with no output stream.
Explanation:
The output stream is null.
Operator response:
Check the output mode.
CTGDJZ206I
Initialize Output Document.
Explanation:
This is an informational message only.
CTGDJZ207E
Trying to read XML with no input stream.
Explanation:
The input stream is null.
Operator response:
Check the input modes.
CTGDJZ208I
Initialize Input Document.
Explanation:
This is an informational message only.
CTGDJZ209E
No input XSL file specified.
Explanation:
There is no input XSL file to transform the original format to the internal format.
Operator response:
Specify the input XSL file parameter.
CTGDJZ210E
The input XSL document has no root.
Explanation:
Each XSL document must have a root tag.
Operator response:
Check the root tag in the input XSL file.
CTGDJZ211E
The XSL document has no children: tag name.
Explanation:
The XSL document must have children elements.
Operator response:
Check the children elements in the input XSL file.
CTGDJZ212I
The XSL document has number of children children elements.
Explanation:
This is an informational message only.
CTGDJZ213E
Cannot parse the input XSL.
Explanation:
The input XSL object is not an instance of String or StringReader.
Operator response:
Check the validity of the XSL file.
CTGDJZ214E
DOM node processing not supported.
Explanation:
Cannot generate DOM input or output.
Operator response:
No action is required.
CTGDJZ215E
Expected child item at index ''index number''.
Explanation:
The node for this index is null.
Operator response:
Check the content of XSL file.
CTGDJZ216I
The XML Child node has no children so its being skipped.
Explanation:
This is an informational message only.
CTGDJZ217E
The XSL does not conform to the defined format.
Explanation:
Expect the node name to be 'Attribute'.
Operator response:
Verify the content of XSL.
CTGDJZ218E
XSL does not conform to the defined format.
Explanation:
Expect the node name to be 'Value'.
Operator response:
Verify the content of XSL.
CTGDJZ220E
Incorrect node type.
Explanation:
The node type must be TEXT_NODE, CDATA_SECTION_NODE or ELEMENT_NODE.
Operator response:
Check the content of XSL.
CTGDJZ221I
SAX Parse Warning:
line:line number, ID:ID, message:message.
Explanation:
This is an informational message only.
CTGDJZ401E
An Exception occurred when using the Naming and Reconciliation Service API.
Operator response:
For more information please refer to the logs of the Naming and Reconciliation Service API.
CTGDJZ402E
An Exception occurred during a database operation when using Naming and Reconciliation Service API.
Operator response:
For more information please refer to the logs of Naming and Reconciliation Service API.
CTGDJZ403I
The parameter param name was initialized with the value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ404I
Init IT registry Function Component will work with book: 'book name'.
Explanation:
This is an informational message only.
CTGDJZ405I
Init IT registry Function Component will work with Refresh set to: 'value'.
Explanation:
This is an informational message only.
CTGDJZ406I
The Common Data Model version of the registered MSS will be 'cdm version'.
Explanation:
This is an informational message only.
CTGDJZ407E
Parameter 'param name' is not provided.
Explanation:
The specified parameter is needed by the Init IT registry Function Component and must be provided.
Operator response:
Provide a value for this parameter.
CTGDJZ408I
Use an IT registry system for the needed meta-data: 'use it registry'.
Explanation:
This is an informational message only.
CTGDJZ409E
Init IT registry Function Component accepts only a IBM TDI Entry as input.
Explanation:
At the beginning of the Function Component's execution cycle the input data passed was not a IBM TDI Entry.
Operator response:
Init IT registry Function Component expects only a IBM TDI Entry as input. Check the AssemblyLine logic and try again.
CTGDJZ410E
The Common Data Model version specified 'param name' is not a valid Common Data Model version.
Explanation:
The Common Data Model version should be in a format of three dot-separated numbers.
Operator response:
Please specify value of Common Data Model version in a format of three dot-separated numbers.
CTGDJZ411I
The MSS's param name has value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ412E
Either MSS Name or Manufacturer Name, Hostname and Product Name are not set in output map of FC.
Explanation:
Either MSS Name or Manufacturer Name, Hostname and Product Name are mandatory for an MSS registration.
Operator response:
Please provide the listed information in the FC's Output Map.
CTGDJZ413E
The Common Data Model version is not set in configuration panel of FC.
Explanation:
Common Data Model version is mandatory for an MSS registration.
Operator response:
Please provide a valid Common Data Model version in the FC's Configuration panel.
CTGDJZ414I
The name of the currently used book 'book name' has been overridden to 'new name'.
Explanation:
This is an informational message only.
CTGDJZ415E
JDBC parameter 'param name' is not set in Configuration panel of FC and can not be read from the IT registry's properties file.
Explanation:
JDBC parameter 'param name' is mandatory for an MSS registration.
Operator response:
Please provide 'param name' either in Configuration panel or in IT registry's properties file.
CTGDJZ416I
Init IT registry Function Component has already opened book 'book name'.
Explanation:
This is an informational message only.
CTGDJZ417E
The book 'book name' is opened and currently used.
Explanation:
The book with the provided book name is currently in use by another Init IT registry Function Component. It will have to release it before this Component can use it.
Operator response:
Check if there is another running AssemblyLine with IT registry Components. If the problem persists either provide another book name for your IT registry Components or restart the TDI server.
CTGDJZ451E
Attribute attribute does not accept value 'value'.
Explanation:
The specified value is not valid for this attribute. 1)If the attribute is '$operation', the following string values are valid: 'create', 'modify', 'delete' (case insensitive). If anything else is passed into the attribute an exception will occur. 2)If the attribute is 'dateFilter', it accepts a valid date in past.
Operator response:
Provide valid values for the Connector's parameters. Consult the documentation for those that are supported.
CTGDJZ452E
An IT registry book opened in REFRESH mode supports only CREATE operations.
Explanation:
The IT registry Book this Connector is working with has been opened in Refresh mode, meaning only 'create' operations may be used for it.
Operator response:
Set the operation to 'create' from the '$operation' attribute or as a delta operation (for example, the operation set to delta tagged entry will override the operation attribute of the Connector). Alternatively, change the book mode to Delta (from the Init IT registry Function Component).
CTGDJZ453E
No class type specified in the configuration of the IT registry Ci and Relationship Connector.
Explanation:
In order to discover the schema of this Connector, the class type parameter must be provided. Otherwise the Component does not know which attributes to display.
Operator response:
Set the required Class Type parameter from IT registry Ci and Relationship Connector's configuration panel.
CTGDJZ454I
IT registry Ci and Relationship Connector will work with book: book name.
Explanation:
This is an informational message only.
CTGDJZ455I
The parameter param name was initialized with the value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ456I
The name of the currently used book 'book name' has been overridden to 'new name'.
Explanation:
This is an informational message only.
CTGDJZ457I
Use an IT registry system for the needed meta-data: 'use it registry'.
Explanation:
This is an informational message only.
CTGDJZ458I
The book 'book name' does not exist or is already closed.
Explanation:
This is an informational message only.
CTGDJZ459E
Parameter 'param name' is not provided.
Explanation:
The specified parameter is needed by the IT registry Ci and Relationship Connector and must be provided.
Operator response:
Provide a value for this parameter.
CTGDJZ460E
Relationship 'relationship name' cannot be updated.
Explanation:
The specified relationship cannot be updated by the IT registry Ci and Relationship Connector and must be removed
Operator response:
Remove this relationship or change the $operation.
CTGDJZ461E
Lookup Criteria 'criterion' is not supported.
Explanation:
The specified criteria is inappropriate for IT registry Ci and Relationship Connector.
Operator response:
Change the criterion to 'equals' or uncheck 'Match Any'
CTGDJZ462E
Filter Criteria 'criterion' is not valid
Explanation:
The criteria mentioned is not in proper format for the IT registry Ci and Relationship Connector.
Operator response:
The attributes should be mention in format as specified below: (for example, cdm:Model=T61p,cdm:Manufacturer=IBM).
CTGDJZ463E
An exception occured while trying to close the database connection: exception message
Explanation:
A database access error may had occured. See the exception message for details.
Operator response:
No action required.
CTGDJZ464E
Configuration Item 'ci name' cannot be updated.
Explanation:
The IT registry contains only identifying attributes for each Configuration Item. And since they cannot be updated, no update operation is supported by the Connector.
Operator response:
Change the $operation of the IT registry Ci and Relationship Connector, or remove it from the AssemblyLine.
CTGDJZ465E
Incorrect GUID value passed to attribute 'guid attr'.
Explanation:
The GUID attributes of the IT registry Ci and Relationship Connector require values from type 'com.ibm.di.fc.itregistry.ConfigurationItemId'. Such objects are created by both this Connector and the Init IT registry FC.
Operator response:
Change the value of the specified attribute.
CTGDJZ501E
Open IdML Function Component accepts only a IBM TDI Entry as input.
Explanation:
At the beginning of the Function Component's execution cycle the input data passed was not a IBM TDI Entry.
Operator response:
Open IdML Function Component expects only a IBM TDI Entry as input. Check the AssemblyLine logic and try again.
CTGDJZ502E
The book 'book name' is currently in use. Release it, before attempting to use it again.
Explanation:
The book with the provided book name is currently in use by another Open IdML Function Component. It will have to release it before this Component can use it.
Operator response:
Check if there is another running AssemblyLine with IdML Components. If the problem persists either provide another book name for your IdML Components or restart the TDI server.
CTGDJZ503E
Not all CDM attributes needed for registering an MSS are provided.
Explanation:
The attributes required for creating an MSS as specified by the naming policy are not provided.
Operator response:
For creating a MSS the user needs to pass either the 'cdm:MSSName' attribute or both 'cdm:Hostname', 'cdm:ManufacturerName' and 'cdm:ProductName'.
CTGDJZ504E
Both a target and a source must be provided, in order to create a relationship.
Explanation:
An IdML Relationship connects two IdML Configuration Items, which can perform role of either a target or a source of the Relationship. Therefore, the ids of two CIs must be mapped to these attributes of the Relationship.
Operator response:
Pass correct CI id values for both the 'source' and 'target' attributes.
CTGDJZ505E
The IBM DL Certification Tool assessed that book 'book name' is not a valid IdML document (file name: 'file name').
Explanation:
The Open IdML FC can be configured to validate the generated IdML. If it fails the validation the user is notified with this message.
Operator response:
Verify that the logic of the associated AssemblyLine is correct.
CTGDJZ506E
A valid CDM version and MSS's Application Code and Hostname are mandatory for the MSS creation.
Explanation:
The CDM version, MSS's Application Code and Hostname must be specified by the user.
Operator response:
Provide the listed information in the FC's configuration panel, or its Output Map (for Application Code and Hostname).
CTGDJZ507E
Class 'class name' cannot be found.
Explanation:
The specified class name cannot be found in the CDM meta-data, so its attributes cannot be listed.
Operator response:
Check if the class name is enterer correctly.
CTGDJZ508I
Open IdML Function Component has already opened book 'book name'.
Explanation:
This is an informational message only.
CTGDJZ509I
The parameter param name was initialized with the value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ510I
Open IdML Function Component will work with book: 'book name'.
Explanation:
This is an informational message only.
CTGDJZ511I
The name of the currently used book 'book name' has been overridden to 'new name'.
Explanation:
This is an informational message only.
CTGDJZ512I
Use an IT registry for the needed meta-data: 'use it registry'.
Explanation:
This is an informational message only.
CTGDJZ513I
Open IdML Function Component will create a idml mode IdML.
Explanation:
This is an informational message only.
CTGDJZ514I
The generated IdML will be validated.
Explanation:
This is an informational message only.
CTGDJZ515I
The MSS''s param name has value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ516I
The MSS''s param name has been overridden to value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ517I
The Common Data Model version of the generated IdML will be 'cdm version'.
Explanation:
This is an informational message only.
CTGDJZ518I
Open IdML Function Component opened book 'value'.
Explanation:
This is an informational message only.
CTGDJZ519E
Parameter 'param name' is not provided.
Explanation:
The specified parameter is needed by the Open IdML Function Component and must be provided.
Operator response:
Provide a value for this parameter.
CTGDJZ551E
Close IdML Function Component accepts only a IBM TDI Entry as input.
Explanation:
At the beginning of the Function Component's execution cycle the input data passed was not a IBM TDI Entry.
Operator response:
Close IdML Function Component expects only a IBM TDI Entry as input. Check the AssemblyLine logic and try again.
CTGDJZ552E
The book 'book name' is already closed or has never been created.
Explanation:
Close IdML Function Component always attempts to close its configured book. If its is executed repeatedly in the Flow of the AssemblyLine for the same book name, an error will occur.
Operator response:
Check the AssemblyLine logic and try again.
CTGDJZ553I
Close IdML Function Component will work with book: 'book name'.
Explanation:
This is an informational message only.
CTGDJZ554I
The name of the currently used book 'book name' has been overridden to 'new name'.
Explanation:
This is an informational message only.
CTGDJZ555I
Close IdML Function Component closed book 'book name'.
Explanation:
This is an informational message only.
CTGDJZ556E
Parameter 'param name' is not provided.
Explanation:
The specified parameter is needed by the Close IdML Function Component and must be provided.
Operator response:
Provide a value for this parameter.
CTGDJZ601E
Rolling IdML Function Component accepts only a IBM TDI Entry as input.
Explanation:
At the beginning of the Function Component's execution cycle the input data passed was not a IBM TDI Entry.
Operator response:
Rolling IdML Function Component expects only a IBM TDI Entry as input. Check the AssemblyLine logic and try again.
CTGDJZ602E
Rolling IdML Function Component can be used only for IdML books stored as files (in-memory books are not allowed).
Explanation:
This Function Component is used to roll the generated IdML file when a certain condition is met. Therefore, it is not applicable for in-memory IdML books.
Operator response:
Either remove (disable) the Rolling IdML Function Component causing the problem, or change the type of the used IdML book to one stored as file (from the Open IdML Function Component).
CTGDJZ603I
The book 'book name' does not exist or is already closed.
Explanation:
This is an informational message only.
CTGDJZ604I
The parameter param name was initialized with the value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ605I
Rolling IdML Function Component will work with book: 'book name'.
Explanation:
This is an informational message only.
CTGDJZ606I
The name of the currently used book 'book name' has been overridden to 'new name'.
Explanation:
This is an informational message only.
CTGDJZ607E
Parameter 'param name' is not provided.
Explanation:
The specified parameter is needed by the Rolling IdML Function Component and must be provided.
Operator response:
Provide a value for this parameter.
CTGDJZ651E
Attribute attribute does not accept value 'value'.
Explanation:
The specified value is not supported by that parameter. For instance the '$operation' attribute of this Connector accepts the following string values: 'create', 'modify', 'delete' (case insensitive). If something else is passed into the attribute this error will occur.
Operator response:
Provide valid values for the Connector's parameters. Consult the documentation for the supported ones.
CTGDJZ652E
The IdML book is opened in REFRESH mode and supports only CREATE operations.
Explanation:
The IdML book this Connector is working with has been opened in Refresh mode, meaning only 'create' operations may be used for it.
Operator response:
Set the operation to 'create' from the '$operation' attribute or as a delta operation (i.e. the operation set to delta tagged entry will override the operation attribute of the Connector). Alternatively, change the book mode to Delta (from the Open IdML Function Component).
CTGDJZ653E
No class type specified in the configuration of the IdML Ci and Relationship Connector.
Explanation:
In order to discover the schema of this Connector, the class type parameter must be provided. Otherwise the Component does not know which attributes to display.
Operator response:
Set the required Class Type parameter from IdML Ci and Relationship Connector's configuration panel.
CTGDJZ654I
IdML Ci and Relationship Connector will work with book: book name.
Explanation:
This is an informational message only.
CTGDJZ655I
The parameter param name was initialized with the value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ656I
The name of the currently used book 'book name' has been overridden to 'new name'.
Explanation:
This is an informational message only.
CTGDJZ657I
Use an IT registry for the needed meta-data: 'use it registry'.
Explanation:
This is an informational message only.
CTGDJZ658I
The book 'book name' does not exist or is already closed.
Explanation:
This is an informational message only.
CTGDJZ659E
Parameter 'param name' is not provided.
Explanation:
The specified parameter is needed by the IdML Ci and Relationship Connector and must be provided.
Operator response:
Provide a value for this parameter.
CTGDJZ701I
The Class Type param name has value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ702I
Use a DIS system for the needed meta-data: 'use dis'.
Explanation:
This is an informational message only.
CTGDJZ703I
The parameter param name was initialized with the value: 'value'.
Explanation:
This is an informational message only.
CTGDJZ704E
Parameter 'param name' is not provided.
Explanation:
The specified parameter is needed by the Data Cleanser Function Component and must be provided.
Operator response:
Provide a value for this parameter.
CTGDJZ705E
The Data Cleaser Function Component accepts only a IBM TDI Entry as input.
Explanation:
At the beginning of the Function Component's execution cycle the input data passed was not a IBM TDI Entry.
Operator response:
The Data Cleaser Function Component expects only a IBM TDI Entry as input. Check the AssemblyLine logic and try again.
CTGDJZ751E
Error parsing XML. An invalid input IdML XML is passed to the parser.
Explanation:
The input XML does not comply with the IdML XML schema.
Operator response:
Correct the input XML so it is valid against the IdML XML schema.
CTGDJZ752I
Reading entry where parent node is ''node name'' and the current node is ''node name''.
Explanation:
This is an informational message only.
CTGDJZ754I
indent Node Name: node name
Explanation:
This is an informational message only.
CTGDJZ755I
indent Node Value: node value
Explanation:
This is an informational message only.