CTGDIW001E
Select a Solution View to delete.
Explanation:
No Solution View was selected for deletion.
Operator response:
Select at least one Solution View and click Delete.
CTGDIW002W
Delete Solution View Solution View name?
Explanation:
Confirm the deletion of Solution View. This cause all Solution View related information to be deleted.
Operator response:
Choose OK to delete the Solution View, or CANCEL to abort.
CTGDIW003E
Unable to delete Solution View Solution View name. This might happen if Action Manager rules are configured for this Solution View. See error logs for more details.
Explanation:
The delete of Solution View failed. This might have occurred because the specified Solution View might not exist or might have been deleted by another user. Also, if Action Manager rules are configured for this Solution View, then Solution View cannot be deleted. Some other internal error could also have occurred. See the error logs for the details.
Operator response:
If Action Manager rules are configured for this Solution View, then the Solution View cannot be deleted. In such a case, go to the Action Manager configuration screen and delete all the Action Manager rules for this Solution View and then delete the Solution View from the Manage Solution View panel.
CTGDIW004E
Select a Solution View to manage.
Explanation:
No Solution View was selected for Manage ACL operation.
Operator response:
Select at least one Solution View and click Manage ACL.
CTGDIW005E
Select a Solution View to modify.
Explanation:
No Solution View was selected for Modify operation.
Operator response:
Select at least one Solution View and click Modify.
CTGDIW006E
The session with remote server for the Solution View could not be established.
Explanation:
A session could not be established with the remote IBM TDI server associated with this Solution View. Editing a Solution View is not possible unless the remote IBM TDI server is running, and the associated Config instance is also loaded on the remote server.
Operator response:
Check the remote server associated with this Solution View. Ensure the the remote API engine is running on the remote server. Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
CTGDIW007E
The Config instance associated with the Solution View is not loaded on the server.
Explanation:
Editing a Solution View is not possible unless the remote IBM TDI server is Running, and the associated Config instance is also loaded on the remote server. In this case, the server session was established, but the associated Solution View was not loaded on it.
Operator response:
Check the remote server associated with this Solution View. Ensure that the required Config instance is loaded on the remote server.
CTGDIW008E
The Solution View Solution View name already exists.
Explanation:
A Solution View with the same name already exists in the Administration and Monitoring Console. Duplicate Solution View names are not allowed.
Operator response:
Specify a unique Solution View name.
CTGDIW009E
It is mandatory to select a Config instance.
Explanation:
You must select at least one Config instance in order to create a Solution View.
Operator response:
Select a Config instance. If no Config instance is visible, then select a running IBM TDI server which has Config instances loaded, or load the remote IBM TDI server with the required Config instance before proceeding with Solution View creation.
CTGDIW010E
It is mandatory to select at least one AssemblyLine.
Explanation:
You must select at least one AssemblyLine in order to create a Solution View.
Operator response:
Select at least one AssemblyLine and proceed. If no AssemblyLines are visible, then select a Config instance which has AssemblyLines or load an appropriate Config instance before proceeding with Solution View creation.
CTGDIW011E
Select a Health AssemblyLine or check the None checkbox.
Explanation:
It is required to select one Health AssemblyLine or explicitly state that no health AssemblyLine for this Solution View. If neither is done, then the user cannot continue with Solution View creation.
Operator response:
Select a Health AssemblyLine or check the None checkbox.
CTGDIW012I
The Solution View Solution View name has been successfully created.
Explanation:
This is an informational message only.
CTGDIW013E
The Solution View could not be created. Check the logs for errors.
Explanation:
Unable to create the Solution View in the Administration and Monitoring Console database. An internal error might have occurred, or an associated data element might have been deleted from the database.
Operator response:
See the error logs. Also try creating the Solution View again.
CTGDIW014E
The Config instance associated with the Solution View Solution View name is not loaded on the server.
Explanation:
The user selected a Solution View whose associated Config instance is not loaded on the server. Managing property store of a Solution View is not possible unless the associated Config instance is loaded on the IBM TDI server.
Operator response:
Load the associated Config instance on the remote server and try again.
CTGDIW015I
The current Solution View has been set to: Solution View name.
Explanation:
This is an informational message only.
CTGDIW016E
Select a Config instance to reload.
Explanation:
It is mandatory to select a running Config instance and click Reload. The user did not select any Config instance.
Operator response:
Select a loaded Config instance and click Reload.
CTGDIW017I
Config Instance Config instance ID successfully reloaded.
Explanation:
This is an informational message only.
CTGDIW018E
Error occurred while reloading Config instance Config instance ID .
Explanation:
Unable to reload the Config instance on the remote IBM TDI Server. This might have occurred because the remote IBM TDI server might no longer be running, or the remote Config instance might have been unloaded. Check the error logs for more information.
Operator response:
Check the error logs for more information, or try again.
CTGDIW019E
The Config Config path is not loaded on the server. Only loaded Configs can be reloaded.
Explanation:
Unable to reload the Config instance on the remote IBM TDI Server. This occurred because the selected Config is not loaded on the remote server. Only loaded Configs can be reloaded.
Operator response:
Select a loaded Config and click on Reload. Alternatively, select a Config that is not loaded, and click on Load.
CTGDIW020E
Select a Config to load.
Explanation:
It is mandatory to select a Config that is not loaded and click Load. The user did not select any Configs.
Operator response:
Select a Config that is not loaded and click Load.
CTGDIW021E
Select a Config instance to unload.
Explanation:
It is mandatory to select a loaded Config instance and click Unload. The user did not select any Configs.
Operator response:
Select a loaded Config instance and click Unload.
CTGDIW022E
Error occurred while trying to unload the Config instance Config instance ID.
Explanation:
An error occurred while trying to unload the Config instance on the remote server. This might have occurred because the Administration and Monitoring Console was unable to contact the remote server or the Config instance might not be loaded on the remote server. See the error logs for more details.
Operator response:
See the error logs for more details, or try again.
CTGDIW023E
The Config Config instance ID is not loaded on the server. Only a loaded Config can be unloaded.
Explanation:
The user tried to unload a Config that is not loaded on server. Only loaded Configs can be unloaded.
Operator response:
See the error logs for more details, or try again by selecting a loaded Config.
CTGDIW024E
Error occurred while trying to load the Config Config path .
Explanation:
An error occurred while trying to load the Config on the remote server. This might have occurred because the Administration and Monitoring Console was unable to contact the remote server or the Config path might have changed. It can also occur if the specified Config is password protected, and no password was specified in the Config Password field, or an incorrect password was specified in the Config Password field. It might also occur if the selected file is not a valid IBM TDI Config file. See the error logs for more details.
Operator response:
Ensure that the remote Config is valid and that the path is correct. Also ensure that for password protected Configs, the correct password is supplied in the Config Password field. See the error logs for more details, or try again.
CTGDIW025E
The Config Config instance ID is already loaded on the server.
Explanation:
Cannot load an already loaded Config. Only Configs that are not loaded can be loaded.
Operator response:
Select a Config that is not loaded to perform the Load operation.
CTGDIW026E
Select a group.
Explanation:
A group must be selected to assign a role. If no groups exist in the list, then create groups first and then assign roles.
Operator response:
Select an existing group, or create new ones before assigning roles.
CTGDIW027E
Select a role.
Explanation:
A group must be assigned a role.
Operator response:
Select a role.
CTGDIW028E
Unable to set role for group group name
Explanation:
Unable to set the role for the user requested group. This might have occurred because the associated Config instance might have been deleted or renamed, or the group might have been deleted or renamed, or an internal error occurred. See the error logs for more details.
Operator response:
See the error logs, or try again.
CTGDIW029I
The role for group group name has been successfully updated.
Explanation:
This is an informational message only.
CTGDIW030E
Select a user.
Explanation:
A user must be selected to assign a role. If no user exist in the list, then create users first and then assign roles.
Operator response:
Select an existing user, or create new ones before assigning roles.
CTGDIW031E
Select a role.
Explanation:
A user must be assigned a role.
Operator response:
Select a role.
CTGDIW032E
Unable to set role for user user name
Explanation:
Unable to set the role for the requested user. This might have occurred because the associated Config instance might have been deleted or renamed, or the user might have been deleted or renamed, or an internal error occurred. See the error logs for more details.
Operator response:
See the error logs, or try again.
CTGDIW033I
The role for user user name has been successfully updated.
Explanation:
This is an informational message only.
CTGDIW034E
Select a Health AssemblyLine or check the None checkbox.
Explanation:
It is required to select one Health AssemblyLine or explicitly specify no health AssemblyLine for this Solution View. The user cannot continue with Solution View modify until a health AssemblyLine is selected, or no health AssemblyLine is specified.
Operator response:
Select a Health AssemblyLine of check the None checkbox.
CTGDIW035I
The Solution View has been successfully updated.
Explanation:
This is an informational message only.
CTGDIW036E
The Solution View could not be updated. Check the logs for errors.
Explanation:
An error occurred while updating the Solution View details in database. This might have occurred because another user modified or deleted the Solution View.
Operator response:
Check the error logs or try editing the Solution View again.
CTGDIW037E
It is mandatory to select at least one AssemblyLine.
Explanation:
A Solution View must have at least one AssemblyLine.
Operator response:
Select at least one AssemblyLine and proceed. If no AssemblyLines are visible, then select a Config instance which has AssemblyLines or load an appropriate Config instance before proceeding with Solution View editing.
CTGDIW038E
Select members to remove access.
Explanation:
The user did not select any members whose access to the particular Solution View must be removed. It is mandatory to select at least one member and click Remove.
Operator response:
Select at least one member and click Remove.
CTGDIW039E
Unable to remove members. See error logs for details.
Explanation:
An internal error occurred because of which the access of the selected members could not be removed. This might have occurred because the selected Solution View might have been deleted or the database might have been in an inconsistent state.
Operator response:
See error logs or try again.
CTGDIW040E
Select a server to delete.
Explanation:
The error occurred because the user clicked the Delete without selecting a server from the list. The user needs to specify which server to delete.
Operator response:
Select a IBM TDI server from the list and click Delete.
CTGDIW041W
Deleting a server will also delete all Solution Views and other information associated with this server. Do you really want to delete the server server name ?
Explanation:
Deleting a server results in deletion of all Solution Views associated with this server from the Administration and Monitoring Console. Any information associated with those Solution Views will also be deleted to maintain database referential consistency. The deletion of the server information is permanent.
Operator response:
If we want to delete the server, click OK, otherwise click Cancel.
CTGDIW042E
Unable to delete server server name. Check the logs for errors.
Explanation:
An internal error occurred because of which the server could not be deleted. This might have occurred because another process might have modified or already deleted the server. Check the error logs for details.
Operator response:
Check the error logs or try again.
CTGDIW043E
Update failed for property property name.
Explanation:
An internal error occurred and the specified property value could not be updated. This might have occurred because another process might have modified or already deleted the proerty. Check the error logs for details.
Operator response:
Check the error logs or try again.
CTGDIW044E
Unable to add property property name.
Explanation:
An internal error occurred because of which the specified property could not be added. Check the error logs for details.
Operator response:
Check the error logs or try again.
CTGDIW045E
Select a property to delete.
Explanation:
The user did not select any property and hit delete. It is mandatory to select a property before clicking Delete.
Operator response:
Select a property from the list and click Delete.
CTGDIW046W
Delete property property name?
Explanation:
Confirmation from user about whether he really wishes to delete the specified property.
Operator response:
If we want to delete the property, click OK, otherwise click Cancel.
CTGDIW047E
Select a property to modify.
Explanation:
The user clicked Modify without selecting a property. Select a property before clicking Modify.
Operator response:
Select a property from the list and click Modify.
CTGDIW048E
Select a property to modify.
Explanation:
The user did not select any property and hit Modify. It is mandatory to select a property before clicking Modify.
Operator response:
Select a property from the list and click Modify.
CTGDIW049E
Select a property to delete.
Explanation:
The user clicked Delete without selecting a property. Select a property before clicking Delete.
Operator response:
Select a property from the list and click Delete.
CTGDIW050W
Delete property property name?
Explanation:
Confirm that we want to delete the specified property.
Operator response:
If we want to delete the property, click OK, otherwise click Cancel.
CTGDIW051E
Select a property to modify.
Explanation:
The user did not select any property and click Modify. It is mandatory to select a property before clicking Modify.
Operator response:
Select a property from the list and click Modify.
CTGDIW052E
Select a property to delete.
Explanation:
The user clicked Delete without selecting a property. Select a property before clicking Delete.
Operator response:
Select a property from the list and click Delete.
CTGDIW053W
Delete property property name?
Explanation:
Confirm that we want to delete the specified property.
Operator response:
If we want to delete the property, click OK, otherwise click Cancel.
CTGDIW054E
Select a property to modify.
Explanation:
The user clicked Modify without selecting a property. Select a property before clicking Modify.
Operator response:
Select a property from the list and click Modify.
CTGDIW055E
Select a property to delete.
Explanation:
The user clicked Delete without selecting a property. Select a property before clicking Delete.
Operator response:
Select a property from the list and click Delete.
CTGDIW056W
Delete property property name?
Explanation:
Confirm that we want to delete the specified property.
Operator response:
If we want to delete the property, click OK, otherwise click Cancel.
CTGDIW057E
Select a property to modify.
Explanation:
The user clicked Modify without selecting a property. Select a property before clicking Modify.
Operator response:
Select a property from the list and click Modify.
CTGDIW058E
Select a property to delete.
Explanation:
The user clicked Delete without selecting a property. Select a property before clicking Delete.
Operator response:
Select a property from the list and click Delete.
CTGDIW059W
Delete property property name?
Explanation:
Confirm we want to delete the specified property.
Operator response:
If we want to delete the property, click OK, otherwise click Cancel.
CTGDIW060E
The current password for user user name is incorrectly entered.
Explanation:
The user supplied incorrect value of the current password. The current password must be supplied correctly to change the password.
Operator response:
Specify the current user password.
CTGDIW061E
The new passwords do not match.
Explanation:
To change the password, the new password and confirm password values should be the same. This is to ensure that the user is sure of what the new password is.
Operator response:
Specify the same password in the New Password and Confirm Password fields.
CTGDIW062E
Unable to change password.
Explanation:
An internal error occurred which prevented the change of password. See the error logs for more information.
Operator response:
See the error logs or try again.
CTGDIW063E
Unable to change password. User user name not found.
Explanation:
An internal error occurred which prevented the change of the password. Most likely, this user was deleted and hence the password could not be changed.
Operator response:
See the error logs or try again.
CTGDIW064I
Password for user user name changed successfully.
Explanation:
This is an informational message only.
CTGDIW065E
Group already exits: group name
Explanation:
The user entered the name of a group that already exists. Duplicate groups are not allowed.
Operator response:
Enter a unique group name and try again.
CTGDIW066E
Illegal character encountered in group name.
Explanation:
The user entered an illegal character (for example, single quotes) in the group name.
Operator response:
Enter a unique group name without any illegal characters.
CTGDIW067E
Unable to add group. Check the logs for errors.
Explanation:
An internal error prevented the creation of the specified group. Check the error logs for more details.
Operator response:
Check the error logs or try again.
CTGDIW068E
No users selected.
Explanation:
No users were selected to be added to this group as members. At least one user has to be selected.
Operator response:
Select at least one user to become a member, or click Cancel.
CTGDIW069E
Group group name does not exist.
Explanation:
Members could not be added to the group because the group does not exist any more. Another user might have deleted this group. Check the logs for more details.
Operator response:
Check the error logs or try again.
CTGDIW070E
Select a group to modify.
Explanation:
The user clicked Modify without selecting a group. Select a group before clicking Modify.
Operator response:
Select a group from the list and click Modify.
CTGDIW071E
Select a group to delete.
Explanation:
The user clicked Delete without selecting a group. Select a group before clicking Delete.
Operator response:
Select a group from the list and click Delete.
CTGDIW072W
Delete group group name?
Explanation:
Confirm the deletion of group. This cause all group related information to be deleted.
Operator response:
Choose OK to delete the group, or CANCEL to abort.
CTGDIW073E
Group group name does not exist.
Explanation:
The group does not exist any more. Another user might have deleted this group. Check the logs for more details.
Operator response:
Check the error logs or try again.
CTGDIW074E
Group group name does not exist.
Explanation:
The group could not be updated because it no longer exists. Another user might have deleted this group. Check the error logs for details.
Operator response:
Check the error logs or try again.
CTGDIW075E
No members selected.
Explanation:
No members were selected to be deleted from this group. At least one user has to be selected.
Operator response:
Select at least one user for deleting.
CTGDIW076W
Remove selected members from group?
Explanation:
Confirm the user wants to remove the selected members from the group.
Operator response:
If we want to remove the members, click OK, otherwise click Cancel.
CTGDIW077E
Group group name does not exist.
Explanation:
The group does not exist any more. Another user might have deleted this group. Check the logs for more details.
Operator response:
Check the error logs or try again.
CTGDIW078E
Passwords do not match.
Explanation:
To add a new user, the new password and confirm password values should be the same. This is to ensure that the user is sure of what the new password is.
Operator response:
Specify the exact same password in the New Password and Confirm Password fields.
CTGDIW079E
User already exits: user name
Explanation:
You entered the name of a user that already exists. Duplicate users are not allowed.
Operator response:
Enter a unique user name and try again.
CTGDIW080E
Illegal character encountered in user name.
Explanation:
You entered an illegal character (for example single quotes) in the user name.
Operator response:
Enter a unique user name without any illegal characters.
CTGDIW081E
Unable to add user. Check the logs for errors.
Explanation:
An internal error prevented the creation of the specified user. Check the error logs for more details.
Operator response:
Check the error logs or try again.
CTGDIW082E
Select a user to modify.
Explanation:
The user clicked Modify without selecting a user. Select a user before clicking Modify.
Operator response:
Select a user from the list and click Modify.
CTGDIW083E
Select a user to delete.
Explanation:
The user clicked Delete without selecting a user. Select a user before clicking Delete.
Operator response:
Select a user from the list and click Delete.
CTGDIW084W
Delete user user name?
Explanation:
Confirm the deletion of user. This cause all user related informationto be deleted.
Operator response:
Choose OK to delete the user, or CANCEL to abort.
CTGDIW085E
User user name does not exist.
Explanation:
The user does not exist any more. Another operator might have deleted this user. Check the logs for more details.
Operator response:
Check the error logs or try again.
CTGDIW086E
Passwords do not match.
Explanation:
For a user, the new password and confirm password values should be the same. This is to ensure that the user is sure of what the new password is.
Operator response:
Specify the exact same password in the New Password and Confirm Password fields.
CTGDIW087E
User user name does not exist.
Explanation:
The user does not exist any more. Another operator might have deleted this user. Check the logs for more details.
Operator response:
Check the error logs or try again.
CTGDIW088E
Unable to modify user. Check the logs for errors.
Explanation:
An internal error occurred which prevented the user from being updated. Check the logs for error.
Operator response:
Check the error logs or try again.
CTGDIW089E
SSL Key store file is not specified.
Explanation:
The user specified SSL key store related properties without specifying the key store file.
Operator response:
Either delete the SSL key store properties(such as password,etc) or specify the key store file name.
CTGDIW090E
SSL Trust store file is not specified.
Explanation:
The user specified SSL trust store related properties, without specifying the trust store file.
Operator response:
Either delete the SSL trust store properties(such as password,etc) or specify the trust store file name.
CTGDIW091E
Unable to add the server. The IBM TDI Server ID Server ID duplicates the Server ID already assigned to another server having the same hostname and port number.
Explanation:
The attributes Hostname, Server ID and Port should be unique for each IBM TDI server entry. A new IBM TDI Server cannot be added if this constraint is violated.
Operator response:
Change the Server ID of the server that need to be added or delete the existing entry in the Administration and Monitoring Console and try again. The Server ID can be changed by editing the global.properties or solution.properties and by setting the com.ibm.di.server.id property.
CTGDIW092E
Unable to establish connection with the server.
Explanation:
Unable to establish connection with the server. This might be because the server is down, or the Remote Server API engine is not running on the remote server or the connection settings to the server are incorrect.
Operator response:
Verify the server is running, and the Remote Server API engine is also running. Also confirm if the hostname, port and authentication details are correct.
CTGDIW093I
Connection successfully established.
Explanation:
This is an informational message only.
CTGDIW094E
Select a server to shutdown.
Explanation:
The error occurred because the user clicked the Shutdown without selecting a server from the list. The user needs to specify which server to shutdown.
Operator response:
Select a IBM TDI server from the list and click Shutdown.
CTGDIW095W
If this server is shut down, then all users connected or working with this server will get disconnected. Also, any AssemblyLines or Config instances on this server will be shut down. Do you really want to shutdown the server server name?
Explanation:
Shutting down a IBM TDI server results in the unloading of all Config instances and AssemblyLines running on this server.
Operator response:
If we want to shut down the server, click OK, otherwise click Cancel.
CTGDIW096E
Unable to shutdown server server name.
Explanation:
An error occurred and the server could not be shutdown. Either the session could not be establised, or there was a server API failure. Check the logs for errors.
Operator response:
Check the logs for errors, or try again.
CTGDIW097E
The Config instance associated with the Solution View Solution View name is not loaded on the server.
Explanation:
The user selected a Solution View whose associated Config instance is not loaded on the server. Generating a Solution View report is not possible unless the associated Config instance is loaded on the IBM TDI server.
Operator response:
Load the associated Config instance on the remote server and try again.
CTGDIW098E
Select an AssemblyLine to start.
Explanation:
The user clicked on Start AssemblyLine without selecting any AssemblyLine. It is mandatory to specify which AssemblyLine to start.
Operator response:
Select an AssemblyLine and click Start AssemblyLine.
CTGDIW099E
The AssemblyLine AssemblyLine name is already running.
Explanation:
The user chose to start an AssemblyLine that is already running.
Operator response:
Select a stopped AssemblyLine and clicked Start AssemblyLine.
CTGDIW100E
The AssemblyLine AssemblyLine name could not be started. Check the logs for errors.
Explanation:
Due to an internal error, or remote IBM TDI server error, the starting of the specified AssemblyLine failed.
Operator response:
Check the error logs or try again.
CTGDIW101E
Select an AssemblyLine to stop.
Explanation:
The user clicked on Stop AssemblyLine without selecting any AssemblyLine. It is mandatory to specify which AssemblyLine to stop.
Operator response:
Select a running AssemblyLine and click Stop AssemblyLine.
CTGDIW102E
The AssemblyLine AssemblyLine name is already stopped.
Explanation:
The user chose to stop an AssemblyLine that is already stopped.
Operator response:
Select a running AssemblyLine and click Stop AssemblyLine.
CTGDIW103W
Stop AssemblyLine AssemblyLine name?
Explanation:
Confirm stopping of the AssemblyLine.
Operator response:
If we want to stop the selected AssemblyLine click Ok otherwise click Cancel.
CTGDIW104E
The AssemblyLine AssemblyLine name could not be stopped. Check the logs for errors.
Explanation:
Due to an internal error the specified AssemblyLine could not be stopped on the remote IBM TDI server.
Operator response:
Check the error logs or try again.
CTGDIW105E
Select an AssemblyLine to view component information.
Explanation:
The user clicked View Components without selecting a AssemblyLine. Select a AssemblyLine before clicking View Components.
Operator response:
Select an AssemblyLine and click View Components.
CTGDIW106E
Unable to obtain Connector information for AssemblyLine AssemblyLine name.
Explanation:
Unable to obtain handle to AssemblyLine object. See error logs for details.
Operator response:
Check the Config containing this AssemblyLine is loaded on the server, and try again.
CTGDIW107E
Select a property to modify.
Explanation:
The user did not select any property and click Modify. It is mandatory to select a property before clicking Modify.
Operator response:
Select a property from the list and click Modify.
CTGDIW108E
Select a property to delete.
Explanation:
The user clicked Delete without selecting a property. Select a property before clicking Delete.
Operator response:
Select a property from the list and click Delete.
CTGDIW109W
Delete property property name?
Explanation:
Confirmation the user wants to delete the specified property.
Operator response:
If we want to delete the property, click OK, otherwise click Cancel.
CTGDIW110E
Select a Solution View to view its server information.
Explanation:
No Solution View was selected for Server Information task.
Operator response:
Select at least one Solution View and click IBM TDI Server Information menu option.
CTGDIW111E
The session with remote server for the Solution View could not be established.
Explanation:
A session could not be established with the remote IBM TDI server associated with this Solution View. Cannot view Server information if the server is not running.
Operator response:
Check the remote server associated with this Solution View. Ensure the the remote API engine is running on the remote server. The Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
CTGDIW112I
Server shutdown successful.
Explanation:
This is an informational message only.
CTGDIW113E
Could not shutdown server.
Explanation:
The server could not be shutdown. See the error logs for more details.
Operator response:
Check the error logs or try again.
CTGDIW114E
Select a Solution View to view its details.
Explanation:
No Solution View was selected for viewing its monitor details.
Operator response:
Select at least one Solution View and click Solution View Details menu option.
CTGDIW115W
The Config instance associated with the Solution View Solution View name is not loaded on the server.
Explanation:
The currently selected Solution View is not loaded on the server. This is not an error, but implies that any AssemblyLine associated with this Solution View would also not be running on the server. This might also be because the Administration and Monitoring Console was not able to establish a connection with the remote IBM TDI Server (because the server is unreachable, or the remote server API engine is not reachable).
Operator response:
This is just for operator information, and does not in any way indicate any error, or unusual condition. We need not take any action, unless you determine the Solution View should have been in a running condition. In that case, the you may choose to load the Config first, or check the logs for errors, or check the Action Manager for any error runs, or view the tombstones for last run statistics, or verify the IBM TDI server itself is running and the remote Server API engine is also running.
CTGDIW116E
Select an AssemblyLine to view Tombstones.
Explanation:
The user clicked View Tombstones without selecting any AssemblyLine.
Operator response:
Select an AssemblyLine and click View Tombstones.
CTGDIW117E
Could not obtain an instance of Tombstone Manager. It might not be running on the remote server.
Explanation:
The Administration and Monitoring Console was unable to obtain a connection to the Tombstone Manager on the remote server.
Operator response:
Verify the tombstone manager is configured to be running. Check the error logs for the exact error. Start the tombstone manager on the remote IBM TDI server and try again.
CTGDIW118E
Select a log file to view.
Explanation:
The user clicked on View without selecting a log file.
Operator response:
Select a log file to view.
CTGDIW119E
Unable to connect to IBM TDI server associated with Solution View Solution View name. Cannot clean up logs for this Solution View.
Explanation:
The Administration and Monitoring Console was unable to connect to the server associated with the Solution View. Logs cannot be deleted for Solution View if the server is not running.
Operator response:
Ensure that the remote IBM TDI server is up and running, with the Remote Server API engine on. Also check the settings of the server in the Administration and Monitoring Console to ensure that all information required to make a connection by the Administration and Monitoring Console is correctly made available.
CTGDIW120E
There were errors while cleaning up logs for Solution view Solution View name.
Explanation:
An errors occurred while firing cleanup logs on IBM TDI server. Check the error logs for more details.
Operator response:
View the error logs for more details, or try again.
CTGDIW121I
Cleanup logs for Solution View Solution View name completed successfully.
Explanation:
This is an informational message only.
CTGDIW122E
An error occurred while saving your preferences.
Explanation:
An errors occurred while saving your preferences. See the error logs for details.
Operator response:
View the error logs for more details, or try again.
CTGDIW123I
Your preferences have been successfully saved.
Explanation:
This is an informational message only.
CTGDIW124E
Unable to create a rule in database. See error logs for details.
Explanation:
Unable to create an entry in the Administration and Monitoring Console database for this rule. See the error logs for more information.
Operator response:
View the error logs for more details, or try again.
CTGDIW125E
Unable to create/update rule in database. See error logs for details.
Explanation:
Unable to update the rule and trigger information in the Administration and Monitoring Console database. See the error logs for more information.
Operator response:
View the error logs for more details, or try again.
CTGDIW126E
No Property name specified for trigger.
Explanation:
The property name is mandatory for the On Property trigger. The current Solution View has no properties chosen, and therefore the Property Name field is empty.
Operator response:
Modify the Solution View to contain at least one property so that the On Property trigger can be specified. Otherwise, choose a different trigger.
CTGDIW127E
No Rule selected for delete.
Explanation:
The user did not select any rule and click Delete. It is mandatory to select a rule before clicking Delete.
Operator response:
Select a rule from the table to delete.
CTGDIW128W
Deleting a rule will delete all information associated with this rule, including the run history of this rule from database.
Do you really want to delete the rule name rule?
Explanation:
Confirm the deletion of the selected Action Manager Rule. The user may choose to Disable rather than Delete the rule.
Operator response:
If we want to delete the rule, click OK, otherwise click Cancel. If the operator wants to keep the Rule in database, but not run the rule, Disable the rule, instead of Deleting the rule.
CTGDIW129E
Unable to delete the rule from database. Ensure that some other rule is not associated with this rule. Also, check the error logs.
Explanation:
Unable to delete the rule from the Administration and Monitoring Console database. This might happen because another rule depends on this rule (when an action is configured to execute, or enable/disable this rule). See the error logs for more information.
Operator response:
View the error logs for more details, or try again. Ensure that there is no other rule, that executes or enables/disables this rule in one of its actions. If that is the case, then delete that action or rule before deleting the current rule.
CTGDIW130E
It is mandatory to select at least one Action.
Explanation:
The user clicked OK without selecting any action.
Operator response:
Select an action on the page, and click OK, otherwise click CANCEL.
CTGDIW131E
For the Copy property action, the source and destination properties are the same: property name. Select different propery names.
Explanation:
For the Copy Property Action, the user chose the same property names for Copy From and Copy To. These must be different properties.
Operator response:
Select different properties in Copy property value action, or uncheck the action.
CTGDIW132E
One or more actions could not be stored. See the logs for errors.
Explanation:
One or more actions could not be stored in database. See the error logs for details, and the list of actions in the previous page, to see the actions which were stored.
Operator response:
See the error logs, or try again.
CTGDIW133E
Select an Action to move.
Explanation:
The user chose to change the execution order of an action, without selecting any actions from the list.
Operator response:
Select an action and then choose to move it up or down the order.
CTGDIW134E
Unable to move the chosen action. See logs for more information.
Explanation:
An error occurred while performing the move operation. See the error logs for details.
Operator response:
See the error logs, or try again.
CTGDIW135E
Select an Action to delete.
Explanation:
The user chose to delete an action, without selecting any actions from the list.
Operator response:
Select an action and then choose to delete it.
CTGDIW136E
Unable to delete the chosen action. See logs for more information.
Explanation:
An error occurred while performing the delete operation. See the error logs for details.
Operator response:
See the error logs, or try again.
CTGDIW137W
Delete action action name?
Explanation:
Confirm deletion of the selected Action.
Operator response:
If we want to delete the action, click OK, otherwise click Cancel.
CTGDIW138E
Either an event type or an event source must be specified.
Explanation:
For the received event trigger, one of the two - event type or event source - must be specified. The user did not specify either.
Operator response:
Specify either the event type or the event source. Otherwise select a different trigger condition. See the com.ibm.di.api.remote.Session.addEventListener() API for more details.
CTGDIW139E
Value for the property has not been specified in trigger.
Explanation:
For the On property trigger, the value field is mandatory. The user did not specify this value.
Operator response:
Specify the property value. Otherwise select a different trigger condition.
CTGDIW140E
Attribute name or value not specified.
Explanation:
For the query AssemblyLine result trigger, the Attribute name and Value fields are mandatory. The user did not specify the attribute name or the attribute value.
Operator response:
Specify the attribute name and the value. Otherwise select a different trigger condition.
CTGDIW141E
Illegal interval value specified. Value must be greater than zero.
Explanation:
For the Time since last execution trigger, the interval value must be greater than zero. The user entered an illegal value, or did not modify the value.
Operator response:
Specify a valid interval value.
CTGDIW142E
Insufficient rights to perform Solution View management for the selected Solution View.
Explanation:
The user chose to perform a Solution View modification with insufficient rights for the chosen Solution View. The user must have Config admin privilege to perform this operation, or must be the console administrator.
Operator response:
Select an authorized Solution View, or login using a user id with appropriate authority. Alternatively, login as Console Administrator and then try again.
CTGDIW143E
Insufficient rights to perform Config administration (load/unload/reload) task for the selected Config instance Config instance.
Explanation:
The user chose to perform a Config load, unload or reload without having Config admin privilege to any associated Solution View. Only when a user has Config admin privilege to a particular Solution View which is associated with the chosen Config instance, can the user perform the load, unload or reload operation for that Config instance. Otherwise, the user must be the console administrator.
Operator response:
Select an authorized Config instance, or login using a user id with appropriate authority. Alternatively, login as Console Administrator and then try again.
CTGDIW144E
Insufficient rights to view details for Solution View Solution View name.
Explanation:
The user chose to view the details of a Solution View without having any rights associated with the Solution View. The user must have some rights associated (whether reader, execute, admin or Config_admin) for the chosen Solution View. Otherwise, the user must be the console administrator.
Operator response:
Select an authorized Solution View, or login using a user id with appropriate authority. Alternatively, login as Console Administrator and then try again.
CTGDIW145E
Insufficient rights to view server information for Solution View Solution View name.
Explanation:
The user chose to view the server information of a Solution View without having any rights associated with the Solution View. The user must have some rights associated (whether reader, execute, admin or Config_admin) for the chosen Solution View. Otherwise, the user must be the console administrator.
Operator response:
Select an authorized Solution View, or login using a user id with appropriate authority. Alternatively, login as Console Administrator and then try again.
CTGDIW146I
The Administration and Monitoring Console has been set up for LDAP Authentication. User and Group addition (or modification) is not supported via the Administration and Monitoring Console for external LDAP servers.
Explanation:
This is an informational message only.
CTGDIW147E
Illegal value specified for Action Manager Log Rotate rate (days). Minimum is 1 day.
Explanation:
The Action Manager Log rotate rate is used to delete logs older than the specified number of days. This value must be a positive integer greater than or equal to 1.
Operator response:
Enter a valid value satisfying the above criteria for Action Manager Log Rotate rate (in days).
CTGDIW148E
Select an Action to modify.
Explanation:
The user chose to modify an action, without selecting any actions from the list.
Operator response:
Select an action and then choose to modify it.
CTGDIW149E
The action could not be updated. See the logs for errors.
Explanation:
The action information could not be updated in database. See the error logs for details, and the list of actions in previous page, to see the ones which successfully got stored.
Operator response:
See the error logs, or try again.
CTGDIW150E
No Rule selected for modify.
Explanation:
The user did not select any rule and clicked Modify. It is mandatory to specify which rule to modify.
Operator response:
Select a rule from the table to modify.
CTGDIW151E
The Action Manager Rule status could not be updated. See the logs for errors.
Explanation:
The Action Manager Rule status could not be updated in database. See the error logs for details.
Operator response:
See the error logs, or try again.
CTGDIW153I
Instance of AMCConfigManager class created.
Explanation:
This is an informational message only.
CTGDIW154I
In createConfigViewMethod(). Parameters received:
Solution View Name: Solution view name
Solution View Desc: description
Server ID: server ID
Exposed AssemblyLines: list of AssemblyLines
Is Health AssemblyLine specified: boolean
Selected Health AssemblyLine: Health AssemblyLine name
Explanation:
This is an informational message only.
CTGDIW155E
Unable to insert into CONFIG_VIEW_MASTER table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW156E
Unable to obtain CV_ID (primary key) value for Solution view Solution view name
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW157E
Unable to insert into CONFIG_VIEW_AL_DETAILS table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW158E
Unable to insert into CONFIG_VIEW_HEALTH_AL_DETAILS table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW159I
In updateConfigView() method. Parameters received:
Solution View ID: Solution view ID
Exposed AssemblyLines: list of AssemblyLines
Is Health AssemblyLine specified: boolean
Selected Health AssemblyLine: Health AssemblyLine name
Explanation:
This is an informational message only.
CTGDIW160I
Deleting AssemblyLine details.
Explanation:
This is an informational message only.
CTGDIW161I
Deleting IBM TDI Properties.
Explanation:
This is an informational message only.
CTGDIW162I
Deleting Health AssemblyLine details.
Explanation:
This is an informational message only.
CTGDIW163I
Insert into CONFIG_VIEW_AL_DETAILS table the exposed AssemblyLines.
Explanation:
This is an informational message only.
CTGDIW164E
Unable to insert into CONFIG_VIEW_HEALTH_AL_DETAILS table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while updating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW165E
Unable to insert into CONFIG_VIEW_HEALTH_AL_DETAILS table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while updating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW166I
Instance of AMCTDIServerManager class created.
Explanation:
This is an informational message only.
CTGDIW167E
Unable to delete server from TDI_SERVER_MASTER table from database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while attempting to delete a IBM TDI server entry from database.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW168W
Unable to set the amc.session.timeout value. Value obtained from amc.properties file: session timeout value.
Explanation:
The Administration and Monitoring Console encountered an error while setting the Administration and Monitoring Console session timeout value. This may have happened because the session timeout was not specified correctly.
Operator response:
Check the amc.properties file for the value of amc.session.timeout variable.
CTGDIW169W
Unable to set the monitor.refresh.rate value. Value obtained from amc.properties file: monitor refresh rate.
Explanation:
The Administration and Monitoring Console encountered an error while setting the Administration and Monitoring Console monitor.refresh.rate. This may have happened because the refresh rate was not specified correctly.
Operator response:
Check the amc.properties file for the value of monitor.refresh.rate variable.
CTGDIW170W
Unable to determine the monitor.startup value. Value obtained from amc.properties file: boolean.
Explanation:
The Administration and Monitoring Console encountered an error while setting the Administration and Monitoring Console monitor.startup value. This may have happened because the boolean value was not specified correctly.
Operator response:
Check the amc.properties file for the value of monitor.startup variable. It must be a boolean indicating whether monior page will be startup page or not.
CTGDIW171E
An error occurred while attempting to read the amc.properties file.
Explanation:
See message.
Operator response:
Check the location of amc.properties file. See the accompanying exception trace. Ensure that the file is not corrupted / truncated.
CTGDIW172E
An error occurred while attempting to read the amc.properties file.
Explanation:
See message.
Operator response:
Check the location of amc.properties file. See the accompanying exception trace. Ensure that the file is not corrupted / truncated.
CTGDIW173E
An error occurred while attempting to read the amc.properties file.
Explanation:
See message.
Operator response:
Check the location of amc.properties file. See the accompanying exception trace. Ensure that the file is not corrupted / truncated.
CTGDIW174E
An error occurred while attempting to read the amc.properties file.
Explanation:
See message.
Operator response:
Check the location of amc.properties file. See the accompanying exception trace. Ensure that the file is not corrupted / truncated.
CTGDIW175E
An error occurred while attempting to write to the amc.properties file.
Explanation:
See message.
Operator response:
Check that the amc.properties file is not locked by another application. See the accompanying exception trace.
CTGDIW176E
Unable to clear logs for AssemblyLine AssemblyLine name in Config Config.
Explanation:
The Administration and Monitoring Console was unable to clean log files associated with the above mentioned AssemblyLine and Config.
Operator response:
See the accompanying exception trace. Also check the remote Config logs. Try again.
CTGDIW177E
Unable to clear logs for AssemblyLine AssemblyLine name in Config Config.
Explanation:
The Administration and Monitoring Console was unable to clean log files associated with the above mentioned AssemblyLine and Config.
Operator response:
See the accompanying exception trace. Also check the remote Config logs. Try again.
CTGDIW178E
Unable to get system log for Solution view: Solution View ID
Explanation:
The Administration and Monitoring Console was unable to obtain a handle to the System Log from the remote server API for the above mentioned Solution view. For this reason, the Cleanup log functionality was not completed.
Operator response:
See the accompanying exception trace. Also check the remote Config logs. Try again.
CTGDIW179W
Unable to get status of Action Mangaer Rules for Solution view id: Solution View ID
Explanation:
Due to some internal error, the Administration and Monitoring Console was unable to get rule status information from the AM_RUN_HISTORY table in database.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW180E
Unable to update AM_RULES_MASTER while trying to update status.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to update Action Manager rule status information in the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW181E
Unable to update AM_RULES_MASTER while trying to update status.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to update Action Manager rule status information in the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW182E
Unable to add Action Manager rule into database.
Rule Name: Rule Name
Rule Description: Description
Solution View ID: Solution View ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to add Action Manager rule information in the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW183E
Unable to obtain the AM_ID (primary key) for the recently added rule.
Explanation:
Most probably, due to an internal database error the Administration and Monitoring Console was unable to obtain the ID for the recently added Action Manager rule.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW184E
Unable to add Action Manager rule into database.
Rule Name: Rule Name
Rule Description: Description
Solution View ID: Solution View ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to add Action Manager rule information in the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW185E
Unable to read Action Manager rule from AM_RULES_MASTER table for rule: Rule Name
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to read Action Manager rule information from the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW186E
No rows were updated in AM_RULES_MASTER while trying to update trigger type.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to update the Action Manager trigger type information in the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW187E
No rows were updated in AM_RULES_MASTER while trying to update trigger type.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to update the Action Manager trigger type information in the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW188E
Unable to read Action Manager rule from AM_RULES_MASTER table for rule: Rule ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to read Action Manager rule information from the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW189E
No rows were updated in AM_RULES_MASTER while trying to update
Rule name: Rule Name
Rule Description: Description
Trigger type: Trigger type
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to update the Action Manager information in the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW190E
Unable to insert data into trigger configuration tables.
Explanation:
Due to an internal error, the Administration and Monitoring Console was unable to insert information into Action Manager Trigger tables.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW191E
Unable to store rule or trigger information.
Explanation:
Due to an internal error, the Administration and Monitoring Console was unable to store rule or trigger into Action Manager related tables.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW192E
Unable to store rule or trigger information. Some error occurred.
The parameters passed to code were:
Rule ID: Rule ID
Rule Name: Rule Name
Rule Description: Description
Trigger Type: Trigger Type
Parameter 1:value
Parameter 2:value
Parameter 3: value
Parameter 4: value
Explanation:
Due to an internal error, the Administration and Monitoring Console was unable to store rule or trigger into Action Manager related tables.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW193E
Unable to Delete rule: Rule ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to delete Action Manager rule information from the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW194E
Some error occurred while attempting to delete rule: Rule ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to delete Action Manager rule information from the AM_RULES_MASTER table.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW195E
Unable to store Action information. Some error occurred.
The parameters passed to code were:
Rule ID: Rule ID
Action Type: Action Type
Parameter 1:value
Parameter 2:value
Parameter 3: value
Parameter 4: value
Explanation:
Due to an internal error, the Administration and Monitoring Console was unable to store action information in database.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW196E
Unable to read action information for rule: Rule ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to read action information for the specified rule.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW197E
Unable to modify execution order of specified action.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to modify the execution order of the specified action.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW198E
Unable to modify execution order of specified action. The parameters passed were:
Rule ID: Rule ID
Direction: Direction
Action ID:Action ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to modify the execution order of the specified action.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW199E
Unable to delete the specified action. The parameters passed were:
Rule ID: Rule ID
Action ID:Action ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to delete the specified action.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW200E
Unable to insert row into AM_UPDATE_DETAILS table.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to make an entry in the AM_UPDATE_DETAILS table. This table is used by Action Manager to monitor real-time updates to rules.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW201E
Unable to obtain action details for Rule: Rule ID and Action: Action ID
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to obtain action details for the specified Rule and Action.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW202E
Unable to obtain rule details for rule: Rule ID
Explanation:
Due to an internal error, the Administration and Monitoring Console was unable to obtain rule details.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW203E
Error while obtaining Solution View Status.
Explanation:
Due to an internal error, the Administration and Monitoring Console was unable to obtain the status of Solution View.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW204E
Error while obtaining status of AssemblyLines.
Explanation:
Due to a IBM TDI server API error, the Administration and Monitoring Console was unable to determine the AssemblyLine details. This may occur if the log4j jar file, or some other jars are not present in the the Administration and Monitoring Console classpath or incompatible libraries are present in the Administration and Monitoring Console (or Remote IBM TDI server).
Operator response:
See the accompanying exception trace. Also check the version of the remote IBM TDI server. Ensure that correct library files (jars) are present in the Administration and Monitoring Console and remote IBM TDI server's classpath.
CTGDIW205E
Unable to store user preferences for user: user name
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to store the user's preferences.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW206E
Unable to get Action Manager Details for Solution View: Solution View ID
Explanation:
Due to an internal error, the Administration and Monitoring Console was unable to query the AM_LOGS, AM_RULES_MASTER for the Action Manager rules associated with this Solution View.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW207E
Unable to delete data from AM_LOGS table.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to delete data from AM_LOGS table.
Operator response:
See the accompanying exception trace.
CTGDIW208W
Unable to convert the monitor.refresh.rate value to integer.
Explanation:
The Administration and Monitoring Console encountered an error while reading the Administration and Monitoring Console monitor.refresh.rate. This may have happened because the refresh rate was not specified correctly.
Operator response:
Check the amc.properties file for the value of monitor.refresh.rate variable.
CTGDIW209E
Could not obtain an instance of Tombstone Manager for Solution View:Solution View name. It might not be running on the remote server.
Explanation:
The Administration and Monitoring Console was unable to obtain a connection to the Tombstone Manager on the remote server.
Operator response:
Verify the tombstone manager is configured to be running. Check the error logs for the exact error. Start the tombstone manager on the remote IBM TDI server and try again.
CTGDIW210E
No log files found for AssemblyLine: AssemblyLine name and Config: Config
Explanation:
The Administration and Monitoring Console was unable to find any log files associated with the specified AssemblyLine.
Operator response:
Verify that a logger is attached to the specified AssemblyLine and that there are log files present. Try again.
CTGDIW211E
No log files found for AssemblyLine: AssemblyLine name and Config: Config
Explanation:
The Administration and Monitoring Console was unable to find any log files associated with the specified AssemblyLine.
Operator response:
Verify that a logger is attached to the specified AssemblyLine and that there are log files present. See the accompanying exception. Try again.
CTGDIW212E
Unable to display contents of Log File: Log file name of AssemblyLine: AssemblyLine name in Config: Config
Explanation:
The Administration and Monitoring Console was unable to find any log files associated with the specified AssemblyLine.
Operator response:
Verify that a logger is attached to the specified AssemblyLine and that there are log files present. See the accompanying exception. Try again.
CTGDIW213E
Unable to retrieve tombstones for AssemblyLine: AssemblyLine in Config: Config
Explanation:
The Administration and Monitoring Console was unable to obtain Tombstones for the specifed AssemblyLine due to some internal error.
Operator response:
Check if the tombstone manager is running. See the accompanying exception. Try again.
CTGDIW214W
Unable to find group: group name
Explanation:
While loading the Modify Group screen, the Administration and Monitoring Console was unable to find the specified group details in database. It may have been modified or deleted already.
Operator response:
Check the logs, and try again.
CTGDIW215W
Error closing database statement.
Explanation:
The Administration and Monitoring Console encountered an error while attempting to close a database statement. This may have occurred because of an underlying JDBC or Database error.
Operator response:
See the exception logs for details.
CTGDIW216W
Error closing database ResultSet.
Explanation:
The Administration and Monitoring Console encountered an error while attempting to close a database ResultSet. This may have occurred because of an underlying JDBC or Database error.
Operator response:
See the exception logs for details.
CTGDIW217W
Error closing database connection.
Explanation:
The Administration and Monitoring Console encountered an error while attempting to close a database connection. This may have occurred because of an underlying JDBC or Database error.
Operator response:
See the exception logs for details.
CTGDIW218W
Message with programmer's Key: key string not found.
Explanation:
The Administration and Monitoring Console was unable to find a message for the specified key in its properties file.
Operator response:
No user action needed.
CTGDIW219W
Some error occurred while evaluating the user's role.
User: User Name
Solution View ID: Solution View ID
Explanation:
The Administration and Monitoring Console was unable to determine the role of the user because of some internal error.
Operator response:
See the accompanying logs.
CTGDIW220W
Some error occurred while evaluating the user's role.
User: User Name
Explanation:
The Administration and Monitoring Console was unable to determine the role of the user because of some internal error.
Operator response:
See the accompanying logs.
CTGDIW221W
Unable to obtain authorized Config instances.
User: User ID
Explanation:
The Administration and Monitoring Console was unable to determine the authorized configs for the user.
Operator response:
See the accompanying logs.
CTGDIW222I
An instance of DBConnectionFactory class created.
Explanation:
This is an informational message only.
CTGDIW223W
Illegal value specified for Action Manager Log Rotate rate (days). Unable to convert to integer. Current value specified for am.logrotate: value
Explanation:
The Action Manager Log rotate rate is used to delete logs older than the specified number of days. This value must be a positive integer greater than or equal to 1. On error, the default is set to 10 days.
Operator response:
Enter a valid value satisfying the above criteria for Action Manager Log Rotate rate (in days).
CTGDIW224I
The Administration and Monitoring Console database: database details
Explanation:
This is an informational message only.
CTGDIW225I
Derby network server already running.
Explanation:
This is an informational message only.
CTGDIW226I
Unable to ping Derby network server. Attempting to start.
Explanation:
This is an informational message only.
CTGDIW227W
Table does not exist: table name
Explanation:
A required table was not found in the database by the Administration and Monitoring Console. The Administration and Monitoring Console will attempt to create the database. This usually happens when the Administration and Monitoring Console database is created for the first time, or the database settings have been changed in amc.properties.
Operator response:
No user response needed, unless the table creation is unexpected. In that case, check if the database settings in amc.properties are correct. If in doubt, mention the complete path of the database in amc.properties.
CTGDIW228W
Table created: table name
Explanation:
A required table was not found in the database by the Administration and Monitoring Console. The Administration and Monitoring Console will attempt to create the database. This usually happens when the Administration and Monitoring Console database is created for the first time, or the database settings have been changed in amc.properties.
Operator response:
No user response needed, unless the table creation is unexpected. In that case, check if the database settings in amc.properties are correct. If in doubt, mention the complete path of the database in amc.properties.
CTGDIW229I
The Administration and Monitoring Console Database has been shutdown.
Explanation:
This is an informational message only.
CTGDIW230W
An error occurred while attempting the Administration and Monitoring Console DB shutdown.
Explanation:
Some error occurred while attempting to shutdown the Administration and Monitoring Console database.
Operator response:
Check the accompanying exception trace for more information.
CTGDIW231I
LDAP user filter: search filter string
Explanation:
This is an informational message only.
CTGDIW232I
LDAP user tree base DN: base DN
Explanation:
This is an informational message only.
CTGDIW233E
An error occurred while attempting to obtain all LDAP users for the Administration and Monitoring Console.
Explanation:
An error occurred while attempting to obtain all LDAP users.
Operator response:
Check the LDAP settings in amc.properties file. Also see the accompanying exception.
CTGDIW234I
LDAP user filter: search filter string
Explanation:
This is an informational message only.
CTGDIW235I
LDAP user tree base DN: base DN
Explanation:
This is an informational message only.
CTGDIW236W
More than one result obtained for username: user name
Explanation:
While attempting to determine valid the Administration and Monitoring Console user (in LDAP), the Administration and Monitoring Console obtained more than one user satisfying the search criteria. Only one user must be obtained.
Operator response:
Check the LDAP settings in amc.properties file. Also see the accompanying exception.
CTGDIW237E
Valid user not found (in LDAP): user name
Explanation:
The Administration and Monitoring Console was unable to obtain the specified user in LDAP.
Operator response:
Check the LDAP settings in amc.properties file. Also see the accompanying exception.
CTGDIW238E
Unable to bind to LDAP server with user: user name
Explanation:
The Administration and Monitoring Console was unable to bind to the specified LDAP server with the passed username and password.
Operator response:
Check the username and password on the LDAP server. Check the LDAP settings in amc.properties file. Also see the accompanying exception.
CTGDIW239I
LDAP group filter: search filter string
Explanation:
This is an informational message only.
CTGDIW240I
LDAP group tree base DN: base DN
Explanation:
This is an informational message only.
CTGDIW241E
An error occurred while attempting to obtain all LDAP groups for the Administration and Monitoring Console.
Explanation:
An error occurred while attempting to obtain all LDAP groups.
Operator response:
Check the LDAP settings in amc.properties file. Also see the accompanying exception.
CTGDIW242I
Obtaining members of group Group DN
Explanation:
This is an informational message only.
CTGDIW243E
An error occurred while attempting to obtain all members of LDAP group: Group DN
Explanation:
An error occurred while attempting to obtain all members of the specified LDAP group.
Operator response:
Check the LDAP settings in amc.properties file. Also see the accompanying exception.
CTGDIW244E
LDAPHostname attribute not specified in amc.properties.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW245W
No value specified for LDAPBindID variable in amc.properties file. Attempting to bind as anonymous user.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW246E
An error occurred while creating LDAP search context.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file. See accompanying exception.
CTGDIW247E
LDAPHostname attribute value not specified in amc.properties or is invalid. Value: Attribute value
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW248E
LDAPPort attribute value not specified in amc.properties or is invalid. Value: Attribute value
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW249E
LDAPAdminUId attribute value not specified in amc.properties or is invalid. Value: Attribute value
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW250E
LDAPAdminPwd attribute value not specified in amc.properties or is invalid.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW251E
LDAPServerType attribute value not specified in amc.properties or is invalid.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW252E
LDAPBindID attribute value not specified in amc.properties or is invalid.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW253E
LDAPBindPassword attribute value not specified in amc.properties or is invalid.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW254E
LDAPSuffix attribute value not specified in amc.properties or is invalid.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW255E
LdapUserPrefix attribute value not specified in amc.properties or is invalid.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW256E
LDAPUserSuffix attribute value not specified in amc.properties or is invalid.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW257W
LDAPsslEnabled attribute value not specified in amc.properties or is invalid. Setting SSL to false.
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW258W
Unable to obtain membership for user:user DN
Explanation:
See message.
Operator response:
Check the LDAP settings in amc.properties file.
CTGDIW259I
Instance of TDISessionFactory class created.
Explanation:
This is an informational message only.
CTGDIW260W
The api.Config.folder property is not set on the remote server.
Explanation:
The api.Config.folder attribute which points to the directory containing configs exposed for remote use is not set on the IBM TDI server. Because of that, the Administration and Monitoring Console will not be able to get the list of stopped configs on the remote server.
Operator response:
Set the api.Config.folder property on the remote IBM TDI server's global.properties file if we want the Administration and Monitoring Console to also list the stopped configs.
CTGDIW261I
Trying to establish connection to:
Server: hostname
Port: port
Explanation:
This is an informational message only.
CTGDIW262I
Attempting to use Custom Authentication with username: username
Explanation:
This is an informational message only.
CTGDIW263I
Unable to establish connection to:
Server: hostname
Port: port
Explanation:
This is an informational message only.
CTGDIW264W
Console administrator username login failed.
Explanation:
Console administrator login failed because of incorrect password.
Operator response:
Specify the correct password.
CTGDIW265W
User username login failed.
Explanation:
Login failed because of incorrect username or password.
Operator response:
Specify the correct password.
CTGDIW266E
An error occurred while loading Navigation XML file.
Explanation:
The console files seem to be corrupted.
Operator response:
Check the XML files in IBMAppConfig folder for corruption. Contact IBM Support.
CTGDIW267W
Unable to set the amc.session.timeout value. Value obtained from amc.properties file: session timeout value. Web server's default value will be applicable.
Explanation:
The Administration and Monitoring Console encountered an error while setting the Administration and Monitoring Console session timeout value. This may have happened because the session timeout was not specified correctly. It must be an integer
Operator response:
Check the amc.properties file for the value of amc.session.timeout variable.
CTGDIW268E
An error occurred while trying to read the Console Admin Password file.
Explanation:
The Administration and Monitoring Console encountered an error while trying to read the Console Administrator's password file.
Operator response:
Check the console_passwd file or replace it with the original, uncorrupted file.
CTGDIW269I
Obtaining handle to amc.properties file.
Explanation:
This is an informational message only.
CTGDIW270E
Unable to initialize LDAP properties. Switching to the Administration and Monitoring Console database based authentication.
Explanation:
The Administration and Monitoring Console encountered an error while trying to initialize LDAP properties, and therefore has switched to normal the Administration and Monitoring Console database based authentication.
Operator response:
Check the LDAP properties and error logs for LDAP related issues. Restart the Administration and Monitoring Console after modifying amc.properties.
CTGDIW271I
LDAP properties initialized. The Administration and Monitoring Console authentication source is set to LDAP.
Explanation:
This is an informational message only.
CTGDIW272E
An error occurred while attempting to read the amc.properties file.
Explanation:
See message.
Operator response:
Check the location of amc.properties file. See the accompanying exception trace. Ensure that the file is not corrupted / truncated. The Administration and Monitoring Console will not be able to run unless this issue is resolved.
CTGDIW273E
Unable to initialize DBConnectionFactory.
Explanation:
The Administration and Monitoring Console was unable to initialize the Administration and Monitoring Console Database.
Operator response:
Check the JDBC properties of amc.properties file. See the accompanying exception trace. Ensure that the file is not corrupted / truncated. The Administration and Monitoring Console will not be able to run unless this issue is resolved.
CTGDIW274I
Administration and Monitoring Console initialization complete.
Explanation:
This is an informational message only.
CTGDIW275I
Administration and Monitoring Console Shutdown.
Explanation:
This is an informational message only.
CTGDIW276I
Calling CSA render with URL: URL
Explanation:
This is an informational message only.
CTGDIW277E
Select a server to modify.
Explanation:
The error occurred because the user clicked the Modify button without selecting a server from the list. The user needs to specify which server to modify.
Operator response:
Select a IBM TDI server from the list and click Modify.
CTGDIW278E
Incompatible version of remote IBM TDI server. Remote server version: version number
Explanation:
The error occurred because the user attempted to work with a remote IBM TDI server which is incompatible with the Administration and Monitoring Console.
Operator response:
Connect to a compatible IBM TDI server version. Check the error logs.
CTGDIW279W
The remote IBM TDI server is of version version number. Some of the features of the Administration and Monitoring Console will not be available or will not work correctly with this server version.
Explanation:
The Administration and Monitoring Console displayed an incompatible server version warning.
Operator response:
It is recommended to use the same version of IBM TDI server as the version of the Administration and Monitoring Console.
CTGDIW280I
Thread created for cleanup of Action Manager related logs.
Explanation:
This is an informational message only.
CTGDIW281E
AssemblyLine required to create or update the Start AssemblyLine Action.
Explanation:
The user did not select any AssemblyLines. It is mandatory to select an AssemblyLine.
Operator response:
Enter an AssemblyLine.
CTGDIW282E
AssemblyLine is required to create or update the Stop AssemblyLine Action.
Explanation:
The user did not select any AssemblyLines. It is mandatory to select an AssemblyLine.
Operator response:
Enter an AssemblyLine.
CTGDIW283E
Notify event actions could not be stored. See the logs for errors.
Explanation:
Notify event action could not be stored in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW284E
Enable/Disable rule action could not be stored. See the logs for errors.
Explanation:
Enable/Disable rule action could not be stored in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW285E
Start AssemblyLine action could not be stored. See the logs for errors.
Explanation:
Start AssemblyLine action could not be stored in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW286E
Stop AssemblyLine action could not be stored. See the logs for errors.
Explanation:
Stop AssemblyLine action could not be stored in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW287E
Modify Property action could not be stored. See the logs for errors.
Explanation:
Modify Property action could not be stored in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW288E
Write Log action could not be stored. See the logs for errors.
Explanation:
Write Log action could not be stored in database. See the error logs for details, and the list of actions in the previous page, to see the actions which were stored.
Operator response:
See the error logs, or try again.
CTGDIW289E
Execute rule action could not be stored. See the logs for errors.
Explanation:
Execute rule action could not be stored in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW290E
Copy property value action could not be stored. See the logs for errors.
Explanation:
Copy property value action could not be stored in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW291E
The Notify event action could not be updated. See the logs for errors.
Explanation:
The Notify event action information could not be updated in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW292E
The Enable/Disable Rule action could not be updated. See the logs for errors.
Explanation:
The Enable/Disable Rule action information could not be updated in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW293E
The Start AssemblyLine action could not be updated. See the logs for errors.
Explanation:
The Start AssemblyLine action information could not be updated in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW294E
The Stop AssemblyLine action could not be updated. See the logs for errors.
Explanation:
The Stop AssemblyLine action information could not be updated in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW295E
The Modify Property action could not be updated. See the logs for errors.
Explanation:
The Modify Property action information could not be updated in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW296E
The Write Log action could not be updated. See the Administration and Monitoring Console logs for errors.
Explanation:
The Write Log action information could not be updated in the Administration and Monitoring Console database. To see the list of actions which were successfully stored go to the previous the Administration and Monitoring Console panel. See the Administration and Monitoring Console logs for more information on the error.
Operator response:
See the error logs, or try again.
CTGDIW297E
The Execute Rule action could not be updated. See the logs for errors.
Explanation:
The Execute Rule action information could not be updated in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW298E
The Copy property Value action could not be updated. See the logs for errors.
Explanation:
The Copy property value action information could not be updated in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW299E
Select a Tombstone entry from the table to view Tombstone details.
Explanation:
The user clicked View Details without selecting any tombstone entry from the table.
Operator response:
Select a Tombstone entry from the table to view details.
CTGDIW300E
Unable to determine Action Manager Status.
Explanation:
The Administration and Monitoring Console was unable to determine Action Manager status. There was some database error while retrieving the Action Manager status.
Operator response:
See the Administration and Monitoring Console logs for error details and try again.
CTGDIW301E
Click on Clear menu option to clear Action Manager Triggered Status.
Explanation:
Click on Clear menu option to clear Action Manager Triggered Status and set it to Action Manager not triggered state.
Operator response:
Click on Clear menu option to clear Action Manager Triggered Status.
CTGDIW302E
Unable to obtain input parameters for AssemblyLine AssemblyLine name.
Explanation:
Unable to obtain handle to AssemblyLine object. This may happen if the Config instance associated with the AssemblyLine is not loaded on the server.
Operator response:
See the Administration and Monitoring Console logs for error details. Check the Config containing this AssemblyLine is loaded on the server, and try again.
CTGDIW303I
There are no input parameters needed for the chosen AssemblyLine Operation.
Explanation:
This is an informational message only.
CTGDIW304E
The AssemblyLine AssemblyLine name could not be started. Check the logs for errors.
Explanation:
Due to an internal error, or remote IBM TDI server error, the starting of the specified AssemblyLine failed. This might also happen if the AssemblyLine was already started by some other process.
Operator response:
Check the error logs or try again.
CTGDIW305E
The specified Entry string in AssemblyLine Input parameter panel is incorrectly constructed: string
Explanation:
An Entry string in the AssemblyLine operation input paramters has to be of the format: Entry[attr1:value1;attr2:value2;attr3:value3]. Use a semicolon to seperate attribute-value pairs and use a colon to seperate an attribute from its value. Example: Entry[ldapserver:myserver.com] Entry[ldapserver:myserver.com;ldapport:389] Entry[ldapserver:myserver.com;ldapserver:anotherserver.com;ldapport:389] (This is an example of a multi valued attribute). The Administration and Monitoring Console encountered an entry string that could not be parsed as per the above format.
Operator response:
Enter the Entry string in the required format.
CTGDIW306E
An error occured while attempting to parse the string: string.
Explanation:
An Entry string in the AssemblyLine operation input paramters has to be of the format: Entry[attr1:value1;attr2:value2;attr3:value3]. Use a semicolon to seperate attribute-value pairs and use a colon to seperate an attribute from its value. Example: Entry[ldapserver:myserver.com] Entry[ldapserver:myserver.com;ldapport:389] Entry[ldapserver:myserver.com;ldapserver:anotherserver.com;ldapport:389] (This is an example of a multi valued attribute). The Administration and Monitoring Console encountered an entry string that could not be parsed as per the above format.
Operator response:
Enter the Entry string in the required format and try again.
CTGDIW307E
An error occured while attempting to parse the string: string.
Explanation:
An Entry string in the AssemblyLine operation input paramters has to be of the format: Entry[attr1:value1;attr2:value2;attr3:value3]. Use a semicolon to seperate attribute-value pairs and use a colon to seperate an attribute from its value. Example: Entry[ldapserver:myserver.com] Entry[ldapserver:myserver.com;ldapport:389] Entry[ldapserver:myserver.com;ldapserver:anotherserver.com;ldapport:389] (This is an example of a multi valued attribute). The Administration and Monitoring Console encountered an entry string that could not be parsed as per the above format.
Operator response:
Enter the Entry string in the required format and try again.
CTGDIW308E
Unable to obtain input parameters for AssemblyLine AssemblyLine name.
Explanation:
Unable to obtain handle to AssemblyLine object. This may happen if the Config instance associated with the AssemblyLine is not loaded on the server. See error logs for details.
Operator response:
Check the Config containing this AssemblyLine is loaded on the server, and try again.
CTGDIW309E
AssemblyLine required to create or update Start AssemblyLine Action.
Explanation:
The user did not mention any AssemblyLines. AssemblyLine Operations cannot be discovered or configured without specifying an AssemblyLine to work with.
Operator response:
Enter an AssemblyLine.
CTGDIW310E
The session with the chosen remote server could not be established.
Explanation:
A session could not be established with the remote IBM TDI server. Discovering AssemblyLine operations is not possible until the specified IBM TDI server is running, and the Config instance is loaded on that server.
Operator response:
Ensure the the remote API engine is running on the remote server. The Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
CTGDIW311E
The Config Config is not loaded on the server. The Config needs to be loaded for the Administration and Monitoring Console to discover the AssemblyLine operations. Do we want to Load the Config?
Explanation:
The chosen Config is not loaded on the server. Discovering AssemblyLine operations is not possible until the specified Config instance is loaded on the server.
Operator response:
Click OK if we want the specified Config to be loaded, or Cancel to return to the previous screen.
CTGDIW312E
Error occurred while trying to start the Config Config path.
Explanation:
An error occurred while trying to start the Config on the remote server. This might have occurred because the Administration and Monitoring Console was unable to contact the remote server or the Config path might have changed. It can also occur if the specified Config is password protected, and no password was specified in the Config Password field, or an incorrect password was specified in the Config Password field. It might also occur if the selected file is not a valid IBM TDI Config file. See the error logs for more details.
Operator response:
Ensure that the remote Config is valid and that the path is correct. Also ensure that for password protected Configs, the correct password is supplied in the Config Password field. See the error logs for more details, or try again.
CTGDIW313E
The AssemblyLine AssemblyLine name is not present in the specified Config. Available AssemblyLines: AssemblyLine list .
Explanation:
The specified AssemblyLine does not exist.
Operator response:
Specify a valid AssemblyLine name.
CTGDIW314E
No operations exposed in AssemblyLine AssemblyLine name.
Explanation:
The specified AssemblyLine does not expose any AssemblyLine operations.
Operator response:
Specify an AssemblyLine that contains operations.
CTGDIW315E
Select an operation from the list.
Explanation:
The user must select an operation from the list to proceed.
Operator response:
Select one of the available operations or press Cancel to return to the previous screen.
CTGDIW316I
There are no input parameters needed for the chosen AssemblyLine Operation.
Explanation:
This is an informational message only.
CTGDIW317E
An error occured while attempting to parse the string: string.
Explanation:
An Entry string in the AssemblyLine operation input paramters has to be of the format: Entry[attr1:value1;attr2:value2;attr3:value3]. Use a semicolon to seperate attribute-value pairs and use a colon to seperate an attribute from its value. Example: Entry[ldapserver:myserver.com] Entry[ldapserver:myserver.com;ldapport:389] Entry[ldapserver:myserver.com;ldapserver:anotherserver.com;ldapport:389] (This is an example of a multi valued attribute). The Administration and Monitoring Console encountered an entry string that could not be parsed as per the above format.
Operator response:
Enter the Entry string in the required format and try again.
CTGDIW318E
An error occured while attempting to parse the string: string.
Explanation:
An Entry string in the AssemblyLine operation input paramters has to be of the format: Entry[attr1:value1;attr2:value2;attr3:value3]. Use a semicolon to seperate attribute-value pairs and use a colon to seperate an attribute from its value. Example: Entry[ldapserver:myserver.com] Entry[ldapserver:myserver.com;ldapport:389] Entry[ldapserver:myserver.com;ldapserver:anotherserver.com;ldapport:389] (This is an example of a multi valued attribute). The Administration and Monitoring Console encountered an entry string that could not be parsed as per the above format.
Operator response:
Enter the Entry string in the required format and try again.
CTGDIW319E
A Config is required to create or update Start AssemblyLine Action.
Explanation:
The user did not enter any Configs. It is mandatory for Start AssemblyLine Action to select a Config.
Operator response:
Enter a Config.
CTGDIW320E
A Config is required to create or update Stop AssemblyLine Action.
Explanation:
The user did not enter any Configs. It is mandatory to select a Config for Stop AssemblyLine Action.
Operator response:
Enter a Config.
CTGDIW321E
Select an AssemblyLine to view Logs.
Explanation:
The user clicked View Logs without selecting any AssemblyLine.
Operator response:
Select an AssemblyLine and click View Logs.
CTGDIW322E
The On property trigger is not supported for Solution Views on IBM TDI 6.0 servers. Select a different trigger.
Explanation:
IBM TDI Properties were introduced in IBM TDI 6.1. Therefore, triggers on property values are not supported for Solution Views created for remote IBM TDI 6.0 servers.
Operator response:
Select a different trigger, or use a Solution View created on IBM TDI 6.1 server or above.
CTGDIW323E
The Copy IBM TDI Property value Action is not supported for Solution Views on IBM TDI 6.0 servers.
Explanation:
IBM TDI Properties were introduced in IBM TDI 6.1. Therefore, actions on properties are not supported for Solution Views created for IBM TDI 6.0 servers.
Operator response:
Select a different action, or use a Solution View created on IBM TDI 6.1 server or above.
CTGDIW324E
The Modify IBM TDI Property Action is not supported for Solution Views on IBM TDI 6.0 servers.
Explanation:
IBM TDI Properties were introduced in IBM TDI 6.1. Therefore, actions on properties are not supported for Solution Views created for IBM TDI 6.0 servers.
Operator response:
Select a different action, or use a Solution View created on IBM TDI 6.1 server or above.
CTGDIW325E
The Notify event Action is not supported for IBM TDI 6.0 Solution Views.
Explanation:
The sendEventNotification API for sending events remotely to a IBM TDI Server was introduced in IBM TDI 6.1. Notify event action is therfore not supported for Solution Views on IBM TDI 6.0 servers.
Operator response:
Select a different action, or use a Solution View created on IBM TDI 6.1 server or above.
CTGDIW326E
The IBM TDI server corresponding to the selected Solution View is not running. It is mandatory for the remote IBM TDI server to be running for adding rules.
Explanation:
Creation of rules in the Administration and Monitoring Console requires that the version of the IBM TDI server be known. The Administration and Monitoring Console can determine the server version only for running IBM TDI servers. For this reason, it is mandatory that the remote IBM TDI server be running for creating/editing rules for the Solution View. Depending on the server version, certain features are enabled or disabled in the Administration and Monitoring Console.
Operator response:
Verify that the remote IBM TDI server corresponding to the Solution View is running.
CTGDIW327E
The IBM TDI server corresponding to the selected Solution View is not running.It is mandatory for the remote IBM TDI server to be running for editing rules.
Explanation:
Editing of rules in the Administration and Monitoring Console requires that the version of the IBM TDI server be known. The Administration and Monitoring Console can determins the server version only for running IBM TDI servers. For this reason, it is mandatory that the remote IBM TDI server be running for creating/editing rules for the Solution View. Depending on the server version, certain features are enabled or disabled in the Administration and Monitoring Console.
Operator response:
Verify that the remote IBM TDI server corresponding to the Solution View is running.
CTGDIW328E
The IBM TDI server corresponding to the selected Solution View is a IBM TDI 6.0 server. IBM TDI Properties feature is not available in IBM TDI 6.0 Solution Views.
Explanation:
IBM TDI Properties were introduced in IBM TDI 6.1. For this reason, the Administration and Monitoring Console does not support properties feature.
Operator response:
Select a Solution View that corresponds to a IBM TDI 6.1 or later server version.
CTGDIW329E
Unable to obtain the SERVER_ID (primary key) for the recently added server.
Explanation:
Most probably, due to an internal database error the Administration and Monitoring Console was unable to obtain the ID for the recently added Server.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW330E
Unable to insert row into AM_SERVER_UPDATE_DETAILS table.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to make an entry in the AM_SERVER_UPDATE_DETAILS table. This table is used by Action Manager to monitor real-time updates to servers registered with the Administration and Monitoring Console.
Operator response:
See the accompanying exception trace. Try again.
CTGDIW331E
Could not obtain an instance of Tombstone Manager. It might not be running on the remote server.
Explanation:
The Administration and Monitoring Console was unable to obtain a connection to the Tombstone Manager on the remote server.
Operator response:
Verify the tombstone manager is configured to be running. Check the error logs for the exact error. Start the tombstone manager on the remote IBM TDI server and try again.
CTGDIW332E
No AssemblyLines found in Config. Atleast one AssemblyLine must be present to create a Solution View.
Explanation:
There are no AssemblyLines in the specified Config. Atleast one AssemblyLine must be present in the Config for creating a new Solution View.
Operator response:
Choose a Config that has at least one AssemblyLine and try again.
CTGDIW333E
Unable to read the AssemblyLine information from Config.
Explanation:
The Administration and Monitoring Console was unable to read the AssemblyLine information from the Config. This may have occured because of some internal error in IBM TDI.
Operator response:
Check the Administration and Monitoring Console logs and try again.
CTGDIW334E
Unable to get published Solution details from Config.
Explanation:
The Administration and Monitoring Console was unable to read the published Solution information from the Config. This may have occured because of some internal error in IBM TDI, or if the Config was corrupted, or if the solution was not published correctly.
Operator response:
Check the Solution details of the Config in Config Editor. Also check the Administration and Monitoring Console logs and try again.
CTGDIW335I
Simple create of Solution View Solution View name successful.
Explanation:
This is an informational message only.
CTGDIW336E
The Solution View could not be created. Check the logs for errors.
Explanation:
The Administration and Monitoring Console was unable to quick create the Solution View in the Administration and Monitoring Console database. If Simple Create from a solution was chosen, then one of the following may have occured: 1) The solution details could not be read by the Administration and Monitoring Console. 2) The AssemblyLines exposed in Solution, do not exist in Config. Alternatively, an internal error may have occured in the Administration and Monitoring Console due to which the Administration and Monitoring Console was unable to read the Config details or a database error may have occured.
Operator response:
See the Administration and Monitoring Console logs for more details. Also try creating the Solution View again.
CTGDIW337I
Detected remote IBM TDI Server version version number. Skipping Select Properties step.
Explanation:
This is an informational message only.
CTGDIW338I
Creating Solution View Solution View name from Published Solution. Config Instance ID: Config ID
Explanation:
This is an informational message only.
CTGDIW339E
Unable to determine AssemblyLines in Config.
Explanation:
The Administration and Monitoring Console was unable to determine the AssemblyLines in the Config. This may occur if the Config is corrupted, or if there are no AssemblyLines in the Config.
Operator response:
See the Administration and Monitoring Console logs for more details. Check the Config file in CE. Also try creating the Solution View again.
CTGDIW340E
No AssemblyLines found in solution. Cannot create Solution View from solution.
Explanation:
There are no AssemblyLines exposed in the solution. A Solution View cannot be created unless there is at least one AssemblyLine in the solution.
Operator response:
Modify the solution in Config Editor to expose at least one AssemblyLine and try again. Alternatively try creating the Solution View manually.
CTGDIW341E
None of the AssemblyLines exposed in the solution exist in Config. Cannot create Solution View from solution.
Explanation:
None of the AssemblyLines exposed in the solution actually exist in the Config. This could occur if the AssemblyLines in Config were removed or modified after creating the solution in Config Editor. The Administration and Monitoring Console cannot create a Solution View with AssemblyLines that are not actually found in the Config.
Operator response:
Modify the solution in Config Editor to expose at least one valid AssemblyLine and try again. Alternatively try creating the Solution View manually.
CTGDIW342E
Unable to insert into CONFIG_VIEW_MASTER table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW343E
Unable to obtain CV_ID (primary key) value for Solution View Solution View name
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW344E
Unable to insert into CONFIG_VIEW_AL_DETAILS table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW345E
Unable to obtain handle to IBM TDI Properties objects.
Explanation:
See message. The Administration and Monitoring Console encountered an internal IBM TDI Properties related error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW346E
Unable to insert into CONFIG_VIEW_HEALTH_AL_DETAILS table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW347E
Unable to determine AssemblyLines in Config.
Explanation:
The Administration and Monitoring Console was unable to determine the AssemblyLines in the Config. This may occur if the Config is corrupted, or if there are no AssemblyLines in the Config.
Operator response:
See the Administration and Monitoring Console logs for more details. Check the Config file in CE. Also try creating the Solution View again.
CTGDIW348E
Unable to insert into CONFIG_VIEW_MASTER table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW349E
Unable to obtain CV_ID (primary key) value for Solution View Solution View name
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW350E
Unable to insert into CONFIG_VIEW_AL_DETAILS table in database.
Explanation:
See message. The Administration and Monitoring Console encountered an internal database error while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW351E
Unable to get a handle to IBM TDI Properties object.
Explanation:
See message. The Administration and Monitoring Console encountered an internal error related to IBM TDI Properties while creating a Solution View.
Operator response:
See the accompanying exception for more details. Try again.
CTGDIW352E
Unable to establish connection to the remote IBM TDI Server. Viewing of AssemblyLine tombstones, AssemblyLine Logs and Manage Properties functionality will not be available.
Explanation:
The Administration and Monitoring Console was unable to connect to the remote IBM TDI Server associated with the Solution View. View AssemblyLine Tombstones, View AssemblyLine Logs and Manage Properties functionality will not be available.
Operator response:
Check the remote server associated with this Solution View. Ensure the the remote API engine is running on the remote server. The Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
CTGDIW353W
Solution is disabled in Config config instance.
Explanation:
The chosen Config has its solution disabled. The Administration and Monitoring Console cannot create a Solution View based on a disabled solution.
Operator response:
If a Solution View is required to be created using a published solution, then specify a config that has a solution that has not been disabled. Alternatively, from the Config Editor, enabled the solution checkbox for the Config.
CTGDIW354E
Rule with name Rule Name already exists for this Solution View.
Explanation:
A rule with the same name already exists for this Solution View. Duplicate rule names are not allowed for the same Solution View.
Operator response:
Specify a unique rule name.
CTGDIW355E
Polling Interval not specified.
Explanation:
For the Query AssemblyLine result trigger, the Polling Interval is mandatory. The user did not specify the Polling Interval.
Operator response:
Specify the Polling Interval.
CTGDIW356W
Select the log file(s) to delete.
Explanation:
Select the log file(s) which are to be deleted. The user has not selected a single log file.
Operator response:
Delete the log file by selecting the check boxes opposite the log file names that are to be deleted.
CTGDIW357W
Delete the selected logs?
Explanation:
All the log files which are selected will be deleted on clicking on the ''Ok'' button.
Operator response:
The confirmation dialog with a warning message is displayed since deletion of logs is an irreversible action. The log files are permanently deleted from the file system. All the selected log files for the configuration will be deleted from the servers system_logs directory if the ''OK'' button is clicked. However if the user wants to cancel the action, the user can click on the ''Cancel'' button.
CTGDIW358E
Error occurred while deleting the log files.
Explanation:
An error has occurred while deleting the log files for the AssemblyLine.
Operator response:
An error has occurred while deleting the log files. For determining the actual reason for this error refer the IBM TDI server's log file.
CTGDIW359E
Error error message occurred while deleting the log files.
Explanation:
An error has occurred while deleting the log files for the AssemblyLine. The reason for the error is mentioned in the IBM TDI server's log file.
Operator response:
An error has occurred while deleting the log files. The log message gives the reason for the error.
CTGDIW360W
All the selected log files were not deleted.
Explanation:
Due to some error, all the selected log files were not deleted.
Operator response:
Due to some error, all the selected log files were not deleted. For details on which log files were not deleted refer the server log file.
CTGDIW361W
The log files which were not deleted are : log file names
Explanation:
Due to some error, all the selected log files were not deleted.
Operator response:
Due to some error, all the selected log files were not deleted.
CTGDIW362W
Delete log is not supported for IBM TDI Server version version number
Explanation:
The delete log feature and API was added in IBM TDI 7.0 release. It is not supported by earlier IBM TDI server versions.
Operator response:
The delete log functionality makes a call to an API which is present with only IBM TDI 7.0 server. Hence the functionality is not available for the earlier IBM TDI server versions.
CTGDIW363W
A session could not be established with the remote IBM TDI server. The Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
Explanation:
A new IBM TDI server cannot be added because the Administration and Monitoring Console was unable to establish connection with the server. This might be because the server is down, or the Remote Server API engine is not running on the remote server or the connection settings to the server are incorrect.
Operator response:
Ensure the the remote API engine is running on the remote server. The Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
CTGDIW364W
A session could not be established with the remote IBM TDI server. The Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
Explanation:
The Server ID cannot be changed because the Administration and Monitoring Console was unable to establish connection with the server. The inability to establish a connection could be caused by any of these three conditions: The server could be down. The Remote Server API engine may not be running on the remote server. The connection settings to the server may be incorrect.
Operator response:
Ensure the the remote API engine is running on the remote server. The Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
CTGDIW365W
Decimal digits cannot be entered in the field filed name.
Explanation:
A user cannot enter decimal values in the specified field.
Operator response:
The user should enter only whole numbers,that is integers in the specified field.
CTGDIW366W
Do we want to change the ServerID of server name from Old Server ID to server id?
Explanation:
Associating the Server ID of a IBM TDI Server with a different instance could invalidate the Solution Views and rules for this server.
Operator response:
If we want to change the Server ID, click OK, otherwise click Cancel.
CTGDIW367E
Unable to change the ServerID. A IBM TDI Server entry with the same Server ID, Hostname and Port has been already added. Check the logs for errors.
Explanation:
The attributes Hostname, Server ID and Port should be unique for each IBM TDI server entry. A new IBM TDI Server cannot be added if this constraint is violated.
Operator response:
Change the Server ID of the server that need to be added or delete the existing entry in the Administration and Monitoring Console and try again. The Server ID can be changed by editing the global.properties or solution.properties and by setting the com.ibm.di.server.id property.
CTGDIW368E
Incorrect config password. Could not load the Config Config path .
Explanation:
An incorrect password is specified for the password protected config.
Operator response:
Ensure that for password protected Configs, the correct password is supplied in the Config Password field. Specify the correct password and try again.
CTGDIW369E
The Administration and Monitoring Console is unable to obtain ISC role information.
Explanation:
The Administration and Monitoring Console is unable to obtain role information because of an internal error.
Operator response:
See the accompanying exception for more details.
CTGDIW370E
The AssemblyLine AssemblyLine name is already running.
Explanation:
The user chose to start an AssemblyLine in a simulate mode that is already running.
Operator response:
Select a stopped AssemblyLine and click Start AssemblyLine in simulate mode.
CTGDIW371E
The AssemblyLine AssemblyLine name could not be started. Check the logs for errors.
Explanation:
Due to an internal error, or remote IBM TDI server error, the starting of the specified AssemblyLine failed.
Operator response:
Check the error logs or try again.
CTGDIW372E
Select an AssemblyLine to start.
Explanation:
The user clicked on Start AssemblyLine in simulate mode without selecting any AssemblyLine. It is mandatory to specify which AssemblyLine to start.
Operator response:
Select an AssemblyLine and click Start AssemblyLine in simulate mode.
CTGDIW373E
The AssemblyLine AssemblyLine name is already running.
Explanation:
The user chose to start an AssemblyLine that is already running.
Operator response:
Select a stopped AssemblyLine and click Start AssemblyLine
CTGDIW374E
The AssemblyLine AssemblyLine name could not be started. Check the logs for errors.
Explanation:
Due to an internal error, or remote IBM TDI server error, the starting of the specified AssemblyLine failed.
Operator response:
Check the error logs or try again.
CTGDIW375E
Select an AssemblyLine to start.
Explanation:
The user clicked on Start AssemblyLine without selecting any AssemblyLine. It is mandatory to specify which AssemblyLine to start.
Operator response:
Select an AssemblyLine and click Start AssemblyLine.
CTGDIW376E
The AssemblyLine AssemblyLine name is already running.
Explanation:
The user chose to start an AssemblyLine in a simulate mode that is already running.
Operator response:
Select a stopped AssemblyLine and click Start AssemblyLine in simulate mode.
CTGDIW377E
The AssemblyLine AssemblyLine name could not be started. Check the logs for errors.
Explanation:
Due to an internal error, or remote IBM TDI server error, the starting of the specified AssemblyLine failed.
Operator response:
Check the error logs or try again.
CTGDIW378E
Select an AssemblyLine to start.
Explanation:
The user clicked on Start AssemblyLine in simulate mode without selecting any AssemblyLine. It is mandatory to specify which AssemblyLine to start.
Operator response:
Select an AssemblyLine and click Start AssemblyLine in simulate mode.
CTGDIW379E
An error has occurred while reading the stash file: exception .
Explanation:
The specified error has occurred while reading the stash file.
Operator response:
See the exception for more information.
CTGDIW380E
No password has been found in the Administration and Monitoring Console stash file.
Explanation:
The Administration and Monitoring Console stash file must contain the password of the Administration and Monitoring Console keystore (and optionally the password of the key).
Operator response:
Provide a password in the stash file.
CTGDIW381I
The key password is not present in the stash file. The keystore password will be used.
Explanation:
This is an informational message only.
CTGDIW382E
Unable to recover the key from the keystore keystore. Exception occurred: exception
Explanation:
The Administration and Monitoring Console was not able to retrieve the entry from the keystore.
Operator response:
Ensure that the keystore is valid and is not corrupted.
CTGDIW383E
The keystore keystore has no entry for the alias alias.
Explanation:
The keystore does not have an entry corresponding to the alias provided.
Operator response:
Ensure that the keystore is correct and is not corrupted.
CTGDIW384E
The key store password is NULL or empty.
Explanation:
This error occurs when the key store password passed to the createStashFile method is null or an empty string.
Operator response:
Specify valid key store password
CTGDIW385E
Stash file already read.
Explanation:
This error occurs when trying to read the stash file more than once.
Operator response:
Check the configuration and if the problem persists contact IBM support.
CTGDIW386E
Stash file file name not found.
Explanation:
This error occurs when trying to read the stash file but the specified file is not present in the Administration and Monitoring Console web application.
Operator response:
The Administration and Monitoring Console war file needs to be bundled with a new stash file and deployed.
CTGDIW387E
Input Stream is NULL.
Explanation:
This error occurs when the input stream passed to the readArray method is null.
Operator response:
Contact IBM support.
CTGDIW388E
The key password or keystore password failed a size validation check. Unable to read in the key password or the keystore password from the stash file.
Explanation:
The correct size of the key password or keystore password was determined before reading their values from the stash file. The size of one of the values read in did not match the specified size and failed the validation check.
Operator response:
Verify that the stash file is valid and has not been corrupted. Verify the stash file has not been changed by a user or process while the application was running.
CTGDIW389E
Output Stream is NULL.
Explanation:
This error occurs when the output stream passed to the writeArray method is null.
Operator response:
Contact IBM support.
CTGDIW390E
Byte array is NULL.
Explanation:
This error occurs when the byte array passed to the writeArray method is null.
Operator response:
Contact IBM support.
CTGDIW391E
Encrypted password data too long: length.
Explanation:
This error occurs when the byte array passed to the writeArray is longer than 255 characters.
Operator response:
Contact IBM support.
CTGDIW392E
No Provider specified for the stash file.
Explanation:
Specify the provider to be used by the stash file.
Operator response:
Refer the usage of the stash file command.
CTGDIW393I
Stash file file name has been created.
Explanation:
This is an informational message only.
CTGDIW394I
Could not create stash file. Exception occurred: exception
Explanation:
See message.
Operator response:
See the exception message for more information.
CTGDIW395I
Usage: StashFile keyStorePassword [keyPassword [securityProviderClass]]
Explanation:
This is an informational message only.
CTGDIW396E
The Administration and Monitoring Console failed to initialize the encrypt/decrypt keystore.
Explanation:
The keystore used for encryption/decryption was not initialized correctly because of the exception.
Operator response:
See the exception message for more information.
CTGDIW397E
Select a property to modify.
Explanation:
The user clicked Modify without selecting a property. Select a property before clicking Modify.
Operator response:
Select a property from the list and click Modify.
CTGDIW398E
Select a property to delete.
Explanation:
The user did not select a property and press delete. You must select a property before clicking Delete.
Operator response:
Select a property from the list and click Delete.
CTGDIW399E
Delete property property name?
Explanation:
Confirm we want to delete the specified property.
Operator response:
If we want to delete the property, click OK, otherwise, click Cancel.
CTGDIW400E
Config is not specified for the config load trigger.
Explanation:
The config load trigger type requires a config.
Operator response:
Specify config in trigger.
CTGDIW401E
Config is not specified for the Config unload trigger.
Explanation:
The config unload trigger type requires a config.
Operator response:
Specify config in trigger.
CTGDIW402E
Decimal digits cannot be entered in the Interval field.
Explanation:
A user cannot enter decimal values in the specified field.
Operator response:
The user should enter only whole numbers, that is integers in the specified field.
CTGDIW403E
Illegal interval value specified. Value must be greater than zero.
Explanation:
For the Timer trigger, the interval value must be greater than zero. The user entered an illegal value, or did not modify the value.
Operator response:
Specify a valid interval value.
CTGDIW404E
Failed to retrieve trigger details. Refer to the logs for additional information.
Explanation:
An error occured while retrieving the action manager trigger details. Please check the logs for additional information.
Operator response:
Check if Action Manager is running. Check logs for additional information.
CTGDIW405E
Failed to retrieve trigger thread details. Refer to the logs for additional information
Explanation:
An error occured while retrieving the Action Manager trigger thread details. Please check the logs for additional information.
Operator response:
Check if Action Manager is running. Check logs for additional information.
CTGDIW406E
Not able to establish session with the action manager.
Explanation:
An error occured while estblishing session with Action Manager. Please check the logs for additional information.
Operator response:
Check if Action Manager is running. Check logs for additional information.
CTGDIW407E
Failed to retrieve the Acton Manager boot time. Refer to the logs for additional information.
Explanation:
Refer to the logs for additional information.
Operator response:
Check if Action Manager is running. Check the logs for additional information.
CTGDIW408E
The selected Solution View is marked for auto update. Ensure that auto update is disabled to modify the Solution View.
Explanation:
Editing a Solution View is not possible if the Solution View is marked for auto update.
Operator response:
Disable Auto Update for the Solution View by selecting ''Disable Auto Update'' from the context menu.
CTGDIW409I
The selected Solution View has been refreshed.
Explanation:
This is an informational message only.
CTGDIW410E
The selected Solution View could not be refreshed. Check the logs for errors.
Explanation:
The Administration and Monitoring Console was unable to refresh the Solution View in the Administration and Monitoring Console database. One of the following may have occured: 1) The solution details could not be read by the Administration and Monitoring Console. 2) The AssemblyLines exposed in the Solution do not exist in the Config. 3) Alternatively, an internal error may have occured in the Administration and Monitoring Console. The internal error may have rendered the Administration and Monitoring Console unable to read the Config details, or a database error may have occured
Operator response:
See the the Administration and Monitoring Console logs for more details. Also try refreshing the Solution View again.
CTGDIW411E
The trigger value for the local Action Manager variable has not been specified.
Explanation:
For the On local variable trigger, the value field is mandatory. The user did not specify this value.
Operator response:
Specify the trigger value for the Action Manager local variable.
CTGDIW412E
Modify local variable action could not be stored. See the logs for errors.
Explanation:
Modify local variable action could not be stored in database. To see which actions were stored successfully, go to the previous Administration and Monitoring Console window. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW413E
The Modify local variable action could not be updated. See the logs for errors.
Explanation:
The Modify local variable action information could not be updated in the database. To see which actions were stored successfully, go to the previous Administration and Monitoring Console window. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW414E
Name or value for the local variable has not been specified in trigger.
Explanation:
For the local variable, the name and initial value field is mandatory. The user did not specify these values.
Operator response:
Specify the name and the initial value for the local variable.
CTGDIW415E
The local variable name already exists.
Explanation:
Local variable names must be unique. The name specified by the user already exists.
Operator response:
Specify a different name for the local variable or remove the existing one.
CTGDIW416E
Select a local variable to delete.
Explanation:
No local variable was selected for deletion.
Operator response:
Select a local variable and click Delete.
CTGDIW417E
Select a local variable to modify.
Explanation:
No local variable was selected for editing.
Operator response:
Select a local variable and click Modify.
CTGDIW418I
Rule rule Name executed successfully. The following actions were executed: actions list
Explanation:
This is an informational message only.
CTGDIW419E
Rule rule Name execution failed. Refer to the logs for additional information.
Explanation:
Some action may not have executed successfully. Refer to the logs for more information.
Operator response:
Some action may not have executed successfully. Refer to the logs for more information.
CTGDIW420E
The Administration and Monitoring Console was unable to obtain running config instances for the local IBM TDI Server.
Explanation:
The Administration and Monitoring Console was unable to otain running config instances for the local IBM TDI server. Ensure that at least one config instance is running on the local IBM TDI server.
Operator response:
See the Administration and Monitoring Console logs for more details.
CTGDIW421I
Solution View Solution View name created successfully.
Explanation:
This is an informational message only.
CTGDIW422E
A unkown error has occurred. See error logs for more details.
Explanation:
The Administration and Monitoring Console was unable to create a Solution View or to redirect control to the Simple Create window. One of the following may have occured: 1) Config instances are not loaded on the local IBM TDI server. 2) The AssemblyLines exposed in Solution, do not exist in Config. 3) A Solution View with a similar name already exists. 4) Alternatively, an internal error may have occured in the Administration and Monitoring Console. The internal error may have rendered the Administration and Monitoring Console unable to read the Config details, or a database error may have occured.
Operator response:
See the error logs, or try again.
CTGDIW423E
An exception occurred while verifying the Action Manager status. Refer to the logs for additional information.
Explanation:
Check if the action manager RMI service is started on the host and port mentioned in the amc.properties. For additional information refer to the logs.
Operator response:
Refer to the logs for additional information.
CTGDIW424I
No thread statistics data were retrieved from Action Manager. This could occur because there are no rules configured in Action Manager.
Explanation:
This is an informational message only.
CTGDIW425I
None of the Action Manager rules was triggered in the time interval time interval.
Explanation:
This is an informational message only.
CTGDIW426W
The Action Manager RMI Host is not set in the amc.properties file. As a result the default host hostname will be used.
Explanation:
The am.api.host property is not set in the amc.properties file. The Administration and Monitoring Console is using the default host that is localhost.
Operator response:
Set the am.api.host property in the amc.properties file.
CTGDIW427W
The Action Manager RMI Port is not set in the amc.properties file. As a result the default port port number will beused.
Explanation:
The am.api.port property is not set in the amc.properties file. The Administration and Monitoring Console is using the default port.
Operator response:
Set the am.api.port property in the amc.properties file.
CTGDIW428W
Not able to establish a connection with the Action Manager. Action Manager Session is null.
Explanation:
The Action Manager might not be running. Or the host and port specified in the amc.properties file may be incorrect.
Operator response:
Verify if the action manager is running on the same host and port as specified in the amc.properties file.
CTGDIW429E
An exception occurred while triggerring the rule rule name. Refer to the logs for additional information.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW430E
An exception occurred while initializing the AMStatus Bean. Refer to the logs for additional information.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW431E
The RMI object remote object name is not bound to the RMI Registry.
Explanation:
The RMI remote object name is not the same.
Operator response:
Verify whether the name of the remote object which is bound to the registry is the same as the one mentioned in exception.
CTGDIW432E
The RMI registry is not reachable on host: host and port: port. The error message is error
Explanation:
The RMI registry might be started on a different host and port. Therefore, the Administration and Monitoring Console is not able to connect to the Action Manager RMI Registry.
Operator response:
Verify that the Action Manager RMI Registry is started on the correct host and port as expected by the Administration and Monitoring Console.
CTGDIW433E
The RMI URL is malformed: url.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW434I
The rollback action for the rule rule name has completed successfully.
Explanation:
This is an informational message only.
CTGDIW435I
The rollback action for the rule rule name failed.
Explanation:
This is an informational message only.
CTGDIW436E
The rollback action for the rule rule name failed. Refer to the logs for additional information.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW437E
A config file is required to start a config using the run name.
Explanation:
Selecting a config file is mandatory.
Operator response:
Select a config file.
CTGDIW438E
Error occurred while trying to load the config Config path.
Explanation:
An error occurred while trying to load the config on the remote server. This might have occurred because the Administration and Monitoring Console was unable to contact the remote server or because the config path might have changed. An error might also occur if the selected file is not a valid IBM TDI config file or if a config is already started using the run name that has been specified. See the error logs for more details.
Operator response:
Ensure that the remote config is valid and that the path is correct. Also try using a different config run name. See the error logs for more details.
CTGDIW439E
Incorrect or no config password. Could not load the property stores associated with config Config path .
Explanation:
No password or an incorrect password is specified for the password protected config.
Operator response:
Ensure that for password protected configs, the correct password is supplied in the Config Password field. Specify the correct password and try again.
CTGDIW440E
Error occurred while trying to load the config Config path to display the property stores associated with it..
Explanation:
An error occurred while trying to load the config on the remote server. This might have occurred because the Administration and Monitoring Console was unable to contact the remote server or because the config path might have changed. An error might also occur if the selected file is not a valid IBM TDI config file. See the error logs for more details.
Operator response:
Ensure that the remote config is valid and that the path is correct. See the error logs for more details.
CTGDIW441E
Insufficient rights to perform config load task. for the selected Config instance Config instance.
Explanation:
The user chose to perform a config load without having config admin privilege to any associated Solution View. Only when a user has config admin privilege to a particular Solution View which is associated with the chosen config instance, can the user perform the load operation for that config instance. Otherwise, the user must be the console administrator.
Operator response:
Select an authorized config instance, or login using a user id with appropriate authority. Alternatively, login as Console Administrator and then try again.
CTGDIW442E
Action of type 'Send email' could not be stored. See the logs for errors.
Explanation:
Send email action could not be stored in database. To see which actions were stored successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW443E
Action of type 'Send email' could not be updated. See the logs for errors.
Explanation:
The Send email action could not be updated in database. To see which actions were updated successfully, go to the previous panel of the Administration and Monitoring Console. See the Administration and Monitoring Console logs for error details.
Operator response:
See the error logs, or try again.
CTGDIW444E
The recipient email address is invalid.
Explanation:
The recipient email address is invalid.
Operator response:
Provide a valid email address for the recipient.
CTGDIW445W
Do we want to delete the tombstones for the AssemblyLine AssemblyLine name ?
Explanation:
A confirmation is requested from the user if the selected tombstones are to be deleted.
Operator response:
If the tombstones are to be deleted click OK. If we do not want to delete the tombstones click Cancel.
CTGDIW446E
Unable to load the amc.properties file.
Explanation:
See message.
Operator response:
See the Administration and Monitoring Console logs for error details.
CTGDIW447E
The Administration and Monitoring Console is unable to delete AssemblyLines associated with the Solution View.
Explanation:
The Administration and Monitoring Console is unable to delete AssemblyLines associated with the Solution View.
Operator response:
See the Administration and Monitoring Console logs for error details.
CTGDIW448W
Do we want to delete the tombstones with GUID GUID?
Explanation:
A confirmation is requested from the user whether the selected tombstone is to be deleted.
Operator response:
If the tombstone is to be deleted click OK and if not click Cancel.
CTGDIW449E
An error occurred while deleting the tombstones: error. Refer to the exception stack trace for more details.
Explanation:
There was an error while deleting the tombstone(s).
Operator response:
There was an error while deleting the tombstone(s). Refer to the exception stack trace in logs for more details.
CTGDIW450I
The properties file file name loaded successfully.
Explanation:
This is an informational message only.
CTGDIW451I
Administration and Monitoring Console database type property set to database type.
Explanation:
This is an informational message only.
CTGDIW452I
The Administration and Monitoring Console is connected to database database name on host host name using port port number.
Explanation:
This is an informational message only.
CTGDIW453I
The jdbc driver driver name is loaded successfully.
Explanation:
This is an informational message only.
CTGDIW454I
The conf directory path: directory path.
Explanation:
This is an informational message only.
CTGDIW455I
Loading schema file file name.
Explanation:
This is an informational message only.
CTGDIW456W
The property amc.db.type is not set and hence setting the database type to file name.
Explanation:
The property amc.db.type is not set, hence defaulting to the default database type.
Operator response:
Ensure the amc.db.type property is set to a valid value.
CTGDIW457W
The properties file file name does not exist.
Explanation:
The property amc.db.type is not set and will be set to the default database type.
Operator response:
Ensure the amc.db.type property is set to a valid value.
CTGDIW458I
The database handler class class name is used for parsing the XML file and constructing the SQL queries.
Explanation:
This is an informational message only.
CTGDIW459E
No handler found for database database type in the properties file file name.
Explanation:
The database type specified in the amc.db.type property in the amc.properties is not spported by the Administration and Monitoring Console.
Operator response:
The valid database types supported by the Administration and Monitoring Console are Derby, DB2, Oracle and MS SQL Server.
CTGDIW460I
DBUtils initialized successfully.
Explanation:
This is an informational message only.
CTGDIW461I
The handler class class name is initialized successfully.
Explanation:
This is an informational message only.
CTGDIW462E
The handler class class name cannot be found.
Explanation:
The handler class cannot be loaded because it was not found in the classpath.
Operator response:
The handler class cannot be found in the classpath, hence it cannot be loaded. Ensure that the handler class is present in the classpath.
CTGDIW463E
The handler class class name cannot be accessed.
Explanation:
See message.
Operator response:
The handler class cannot be accessed because of some security issues. Refer to the logs for additional information.
CTGDIW464E
The handler class class name cannot be initialized.
Explanation:
See message.
Operator response:
The handler class cannot be initialized. Refer to the logs for additional information.
CTGDIW465E
An error occurred while parsing the XML file: error message.
Explanation:
See message.
Operator response:
Refer to the logs for additional information.
CTGDIW466E
The XML file file name cannot be found.
Explanation:
See message.
Operator response:
Refer to the logs for additional information.
CTGDIW467I
The SQL Query executed successfully: SQL query.
Explanation:
This is an informational message only.
CTGDIW468W
The SQL query execution failed: SQL query.
Explanation:
See message.
Operator response:
Refer to the logs for additional information.
CTGDIW469I
SQL query SQL query not executed as the database object already exists.
Explanation:
This is an informational message only.
CTGDIW470E
An rrror occurred while initializing the Administration and Monitoring Console database.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW471E
An error occurred while inserting the default local server. Refer to the stack trace for more details.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW472E
An exception was encountered while processing the XML data.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW473E
None of the tombstones have been deleted from the selected delete criteria.
Explanation:
No tombstones were deleted matching the specified delete criteria.
Operator response:
Verify whether the tombstone manager is running or verify that the delete criteria specified is valid.
CTGDIW474I
Number of tombstones deleted successfully : number of tombstones.
Explanation:
This is an informational message only.
CTGDIW475I
The Administration and Monitoring Console database XML file path is file path
Explanation:
This is an informational message only.
CTGDIW476I
Successfully loaded the jdbc driver class name.
Explanation:
This is an informational message only.
CTGDIW477I
The property amc.db.type is not set in the amc.properties file. Defaulting to Derby Database type.
Explanation:
This is an informational message only.
CTGDIW478E
Unable to update the database with the values specified in the checkboxes.
Explanation:
Due to an internal database error, the Administration and Monitoring Console was unable to update the values of checkboxes in the database.
Operator response:
See the accompanying exception trace for more information and try again.
CTGDIW478I
The database type is set to type name.
Explanation:
This is an informational message only.
CTGDIW479W
No log files found for AssemblyLine: AssemblyLine name and Config: Config name
Explanation:
The Administration and Monitoring Console was unable to find any log files associated with the specified AssemblyLine.
Operator response:
Verify that a logger is attached to the specified AssemblyLine and that there are log files present. See the accompanying exception and try again.
CTGDIW480W
Select the log file(s) to delete.
Explanation:
Select the log file(s) which are to be deleted. The user has not selected a single log file.
Operator response:
Delete the log file by selecting the check boxes opposite the names of the log files that are to be deleted.
CTGDIW481W
Unable to delete the following log files: file names.
Explanation:
An error occurred and some of the selected log files were not deleted.
Operator response:
An error occurred and some of the selected log files were not deleted.
CTGDIW482E
An error occurred while deleting the log files.
Explanation:
An error has occurred while deleting the log files for the AssemblyLine.
Operator response:
An error occurred while deleting the log files. Refer the log file of the IBM TDI server for more information.
CTGDIW483E
An error occurred while deleting the log files: error message.
Explanation:
An error occurred while deleting the log files for the AssemblyLine. The reason for the error is mentioned in the IBM TDI server log file.
Operator response:
An error has occurred while deleting the log files. Refer the error message more information.
CTGDIW484W
Delete the selected logs?
Explanation:
All the log files which are selected will be deleted on clicking the ''Delete'' button.
Operator response:
The confirmation window displaying a warning message is displayed because deleting logs is an irreversible action. The log files are permanently deleted from the file system. All the selected log files for the configuration will be deleted from the servers system_logs directory if you click ''OK'' button. Click ''Cancel'' button to cancel the action.
CTGDIW485W
An error occurred while displaying the log files.
Explanation:
An error occurred while displaying the log files.
Operator response:
Refer to the exception stack trace in logs for more details and try again.
CTGDIW486W
An error occurred while displaying the log files.
Explanation:
An error occurred while displaying the log files.
Operator response:
Refer to the exception stack trace in logs for more details and try again.
CTGDIW487E
Unable to establish connection to the remote IBM TDI Server. Log management functionality is not available for the selected Solution View.
Explanation:
The Administration and Monitoring Console was unable to connect to the remote IBM TDI Server associated with the Solution View. Log management functionality is not available for the selected Solution View.
Operator response:
Check the remote server associated with this Solution View. Ensure that the remote API engine is running on the remote server. The Administration and Monitoring Console must be able to connect and establish a session with the remote IBM TDI server before it can continue with the current task.
CTGDIW488I
This Solution View belongs to a server prior to IBM TDI version 7.0. The user cannot see the log file listing. All log files satisfying the deletion criteria will be deleted when you click delete.
Explanation:
This is an informational message only.
CTGDIW489W
A username and password or keystore and keystore password must be specified in order to log into the remote computer.
Explanation:
The user credentials in the form of username and password or keystore and keystore password are required for logging in to the target computer.
Operator response:
Provide the username and password or keystore and keystore password for enabling communication with the target computer.
CTGDIW490W
The selected action action name is not supported.
Explanation:
The selected action is not supported by the Administration and Monitoring Console.
Operator response:
The selected action is not supported by the Administration and Monitoring Console.
CTGDIW491E
The Solution View could not be created. Check the logs for errors.
Explanation:
The Solution View could not be created. Check the logs for errors.
Operator response:
See the Administration and Monitoring Console logs for more details.
CTGDIW492W
The Parent User Task manager object is null and cannot display the panels.
Explanation:
The parent utm object is required in order to display the panels. The object is null the panels cannot be displayed.
Operator response:
See the Administration and Monitoring Console logs for more details.
CTGDIW493E
The sender email address is invalid.
Explanation:
The sender email address is invalid.
Operator response:
Provide a valid email address for the sender.
CTGDIW494I
No healthAL details for Solution View: Solution View name.
Explanation:
This is an informational message only.
CTGDIW495E
An error while rolling back database transaction : error
Explanation:
Check logs for additional information.
Operator response:
Check logs for additional information.
CTGDIW496E
The command length exceeds the database column width.
Explanation:
The database column length for saving the command is 800 characters. If the command length exceeds 800 characters the Administration and Monitoring Console will not be able to save the command in the database.
Operator response:
Modify the command such that the length of the command is less than 800 characters.
CTGDIW497I
The AssemblyLine Solution View name has no tombstones to be deleted.
Explanation:
This is an informational message only.
CTGDIW498E
An error error occurred while initializing the Adinistration and Monitoring Console security.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW499E
An error error occurred while connecting to Action Manager.
Explanation:
Verify if Action Manager is running on the port specified in amc.properties file.
Operator response:
Verify if Action Manager is running on the port specified in amc.properties file.
CTGDIW500E
An error error occurred while writing the SQL file.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW501I
Inside the tokenizeSQLCommands method.
Explanation:
This is an informational message only.
CTGDIW502I
The total number of sql queries generated is number of sql queries
Explanation:
This is an informational message only.
CTGDIW503I
The handler property name for getting the handler class is property name
Explanation:
This is an informational message only.
CTGDIW504I
Loaded the file name file.
Explanation:
This is an informational message only.
CTGDIW505W
The configuration file file name does not exist.
Explanation:
Administration and Monitoring Console is not able to load the XML file containing the database schema.
Operator response:
Refer to the logs for additional information.
CTGDIW506E
An error occurred while reading the configuration XML file file name.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW507E
An error occurred while closing the input stream.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW508I
Inside the parseXML(InputStream, String) method of DBUtils.
Explanation:
This is an informational message only.
CTGDIW509I
Started parsing the XML file.
Explanation:
This is an informational message only.
CTGDIW510I
Completed parsing the XML file.
Explanation:
This is an informational message only.
CTGDIW511I
Inside the parseXML() method of DBUtils.
Explanation:
This is an informational message only.
CTGDIW512I
Reading the XML file file name into the input stream.
Explanation:
This is an informational message only.
CTGDIW513I
Parsing the XML file file name using the Handler Handler name.
Explanation:
This is an informational message only.
CTGDIW514E
Error closing the input stream.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW515E
An error error occurred while connecting to Action Manager.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW516I
Unencrypted string is null or empty
Explanation:
This is an informational message only.
CTGDIW517I
Encrypted string was null or empty.
Explanation:
This is an informational message only.
CTGDIW518E
An error occurred while decrypting property: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW519E
An error occurred while initializing of String encryption decryption utility: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW520E
An error occurred while encrypting property: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW521E
An error occurred while retrieving the information of Solution View name solution view: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW522E
An error occurred while retrieving the Server information: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW523E
An error occurred while creating the Solution View solution view name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW524E
An error occurred while rolling back the database transaction: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW525E
An error occurred while retrieving the latest Solution View ID: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW526E
An error occurred while adding the Solution View details in database: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW527E
An error occurred while adding the Solution View properties in database: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW528E
An error occurred while adding the Health AssemblyLine details: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW529E
An error occurred while commiting changes to the database: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW530E
An error occurred while creating a solution view from a published solution: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW531E
An error occurred while deleting AssemblyLine details: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW532E
An error occurred while adding AssemblyLine details: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW533E
An error occurred while updating Solution View properties: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW534E
An error occurred while retrieving Solution Views for user user id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW535W
Invalid integer Solution View ID: Solution View id.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW536E
An error occurred while deleting Solution View: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW537E
An error occurred while executing the SQL query SQL query: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW538E
An error occurred while retrieving the ACL information: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW539E
An error occurred while retrieving user information for Solution View solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW540E
An error occurred while retrieving groups with no access to Solution View solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW541E
An error occurred while storing user user name with role role for Solution View solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW542E
An error occurred while deleting user groups: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW543E
An error occurred while retrieving ACL information for Solution View Solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW544E
An error occurred while retrieving the Solution View properties: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW545E
An error occurred while retrieving the Health AssemblyLine details for Solution View id solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW546E
An error occurred while retrieving the Local Action Manager Variables for Solution View id solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW547E
An error occurred while disabling auto update for Solution View id solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW548E
An error occurred while adding the local variable variable name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW549E
An error occurred while updating the local variable variable name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW550E
An error occurred while deleting the local variable variable name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW551E
An error occurred while verifying if the local variable variable name exists: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW552E
An error occurred while refreshing the Solution View: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW553E
An error occurred while deleting the AssemblyLines for Solution View id solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW554E
An error occurred while deleting the properties for Solution View id solution view id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW555E
An error occurred while retrieving properties for property store Property Store name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW556E
An error occurred while refreshing published solution: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW557E
An error occurred while initializing the ManageTDISrvBean: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW558E
An error error occurred while verifying the Local Server.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW559E
An error occurred while initializing ViewMonitorBean: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW560E
An error occurred while initializing the QuickCreateBean: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW561E
An error occurred while getting the start time for AssemblyLine AsemblyLine name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW562E
An error occurred while retrieving the AssemblyLine details: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW563E
An error occurred while retrieving the Config for AssemblyLine AssemblyLine name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW564E
An error occurred while initializing the class name class: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW565E
An error occurred while stopping the AssemblyLine AssemblyLine name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW566E
An error occurred while starting the AssemblyLine AssemblyLine name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW567E
An error occurred while starting the AssemblyLine AssemblyLine name in simulate mode: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW568E
An error occurred while retrieving the AssemblyLine details: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW569E
An error occurred while retrieving properties: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW570E
An error occurred while populating the AssemblyLine table for AssemblyLine AssemblyLine name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW571E
An error occurred while populating the Health AssemblyLine table for Health AssemblyLine Health AssemblyLine name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW572E
An error occurred while retrieving the AssemblyLines for the Solution View Solution view name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW573E
An error occurred while preparing the Properties panel: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW574E
An error occurred while refreshing the Properties panel: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW575E
An error occurred while retrieving the last stop time for the AssemblyLine AssemblyLine name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW576E
An error occurred while obtaining the AssemblyLine name AssemblyLine statistics: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW577E
An error occurred while getting the AssemblyLine status: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW578E
An error occurred while getting the preferred Solution Views: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW579E
An error occurred while getting the Solution Views for user name user: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW580E
An error occurred while getting the IBM IBM TDI port: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW581E
An error occurred while deleting the AM_LOGS_HISTORY for Solution View ID Solution View id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW582E
An error occurred while getting the Solution View ID for Solution View Solution View: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW583E
An error error occurred while closing the Statement object.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW584E
An error occurred while stopping a Config Instance: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW585I
An error occurred while executing the SQL query SQL query: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW586E
An error occurred while creating the table table name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW587E
An error error occurred while getting the connector.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW588E
An error occurred while getting the parserConfig for Connector: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW589E
An error occurred while getting the Connector name: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW590E
An error occurred while getting the Connector mode: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW591E
An error occurred while getting the parser type associated with Connector: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW592E
The Connector Config instance is null.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW593E
An error occurred while getting the connector status and will assume its enabled: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW594E
An error occurred while getting the connector information on inheritance: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW595E
An error error occurred while getting the connector information.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW596I
Completed processing the Administration and Monitoring Console XML document.
Explanation:
This is an informational message only.
CTGDIW597I
Processing the Primary Key instruction.
Explanation:
This is an informational message only.
CTGDIW598I
Processing the Foreign Key instruction.
Explanation:
This is an informational message only.
CTGDIW599I
Processing the Unique Key instruction.
Explanation:
This is an informational message only.
CTGDIW600I
Constructing the CREATE TABLE SQL query for table name table.
Explanation:
This is an informational message only.
CTGDIW601I
Processing the column tag for table for table name table.
Explanation:
This is an informational message only.
CTGDIW602I
Processing the autoincrement instruction.
Explanation:
This is an informational message only.
CTGDIW603I
Processing the constraint constraint type for column column.
Explanation:
This is an informational message only.
CTGDIW604I
The primary key name is primary key name.
Explanation:
This is an informational message only.
CTGDIW605I
The foreign key name is key name.
Explanation:
This is an informational message only.
CTGDIW606I
Detected remote server version: server version. Disabling tombstone button and Manage properties button.
Explanation:
This is an informational message only.
CTGDIW607E
An error occurred while getting the meta merge config: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW608I
No action to be performed for the command command name.
Explanation:
This is an informational message only.
CTGDIW609E
An error occurred while deleting the rule with Rule ID rule id: error
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW610W
An error occurred while deleting the file file name:
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW611E
The string path is not a valid URL. Malformed Url exception occurred while converting the string to URL.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW612E
An error occurred while closing the output stream.
Explanation:
Refer to the logs for additional information.
Operator response:
Refer to the logs for additional information.
CTGDIW613E
The selected tombstone entry does not exist.
Explanation:
The tombstone entry no longer exists in the database. It may have been removed by another application.
Operator response:
Refresh the panel. Check any error logs.
CTGDIW614E
A thread in waiting/sleeping/paused state is interrupted by another thread.
Explanation:
The tombstone entry no longer exists in the database. It may have been removed by another application.
Operator response:
Refresh the panel. Check any error logs.
CTGDIW615E
An error occurred while getting the server id for IBM IBM TDI server on host host and port port: error
Explanation:
The tombstone entry no longer exists in the database. It may have been removed by another application.
Operator response:
Refresh the panel. Check any error logs.
CTGDIW616E
Conversion of string string to number type failed
Explanation:
The tombstone entry no longer exists in the database. It may have been removed by another application.
Operator response:
Refresh the panel. Check any error logs.
CTGDIW617E
An error occurred while deleting the tombstones.
Explanation:
There was a remote API error while deleting the tombstone(s).
Operator response:
Ensure that the remote server is running and try again.
CTGDIW618W
Any changes to JDBC or SSL properties will need require a manual restart of the Administration and Monitoring Console. Apply changes to console properties?
Explanation:
Confirm updation of console properties.
Operator response:
If we want to save the changes to console properties, click OK, otherwise click Cancel.
CTGDIW619E
An error occurred while reading properties using Server API.
Explanation:
There was a remote API error while reading properties.
Operator response:
Ensure that the remote server is running and try again.
CTGDIW620E
An error occurred while accessing AssemblyLine information using Server API.
Explanation:
There was a remote API error.
Operator response:
Ensure that the remote server is running and try again.
CTGDIW621E
An error occurred while accessing Config information using Server API.
Explanation:
There was a remote API error.
Operator response:
Ensure that the remote server is running and try again.
CTGDIW622E
An error occurred while closing file stream.
Explanation:
An error occurred while closing file stream.
Operator response:
Check error message and try again.
CTGDIW623E
An error occurred while rolling back database transaction : error
Explanation:
Check logs for additional information.
Operator response:
Check logs for additional information.
CTGDIW624E
An error while rolling back database transaction : error
Explanation:
Check logs for additional information.
Operator response:
Check logs for additional information.
CTGDIW625E
Select an Action Manager log to delete.
Explanation:
No Action Manager logs were selected for deletion.
Operator response:
Select an Action Manager log for deletion.
CTGDIW626E
The End Date is earlier than the Start Date.
Explanation:
See the error message.
Operator response:
Select the End Date to be after the Start Date.
CTGDIW627E
Unable to find group: string.
Explanation:
An error occurred while retrieving the specified group, used for setting user privileges.
Operator response:
Check logs for additional information, more specifically SQLExceptions. A problem may have occured with the database used to store group information.