The standby connection value ''<insert_0>'' given for property ''<insert_1>'' is not valid and has been ignored.
Severity
10 : Warning
Explanation
The specified standby connection name is not valid. Standby connection names must consist of a host name immediately followed by a port number enclosed in parentheses, for example: HOST.IBM.COM(1414). The value will be ignored if the standby connection name is incorrectly specified.
Response
Modify the appropriate properties file so that the value assigned to the given property is a valid standby connection name before trying the command again.
BFGAP0002W
The standby connection value ''<insert_0>'' given for property ''<insert_1>'' specifies a port number which is not valid and has been ignored.
Severity
10 : Warning
Explanation
The specified standby connection name specifies a port number which is not valid. Port numbers must be a non-negative numeric value. If the connection name specifies a port number which is not valid, then it will be ignored.
Response
Modify the appropriate properties file so that the value assigned to the given property is a valid standby connection name before trying the command again.
BFGAP0003W
The standby connection value ''<insert_0>'' given for property ''<insert_1>'' duplicates the primary connection details and has been ignored.
Severity
10 : Warning
Explanation
The specified standby connection name specifies the same host and port as the primary connection details and so it has been ignored.
Response
Modify the appropriate properties file so that the value assigned to the given property does not duplicate the primary connection details before trying the command again.
BFGAP0004E
An internal error has occurred. The property is <insert_0>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0006E
The properties file <insert_0> could not be read due to: <insert_1>.
Severity
20 : Error
Explanation
The specified properties file could not be read for the specified reason. As a result, the current command could not be completed.
Response
Use the information present in the message to identify why the specified properties file could not be read. If possible correct the problem, otherwise contact the IBM support center for further assistance.
BFGAP0007E
An internal error has occurred. The ''<insert_0>'' properties file does not contain a ''<insert_1>'' property.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0008E
An internal error has occurred. The product data directory value ''<insert_0>'' could not be resolved due to: <insert_1>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0009E
An internal error has occurred. The product data directory ''<insert_0>'' does not exist or cannot be read.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0010W
The properties file <insert_0> could not be read due to: <insert_1>.
Severity
10 : Warning
Explanation
The specified properties file could not be read for the specified reason. As a result, the current command could not be completed.
Response
Use the information present in the message to identify why the specified properties file could not be read. If possible correct the problem, otherwise contact the IBM support center for further assistance.
BFGAP0011E
An internal error has occurred. The ''<insert_0>'' properties file does not contain a ''<insert_1>'' property.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0012E
An internal error has occurred. The ''<insert_0>'' directory does not exist in <insert_1>, or does not contain a required properties file.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0013E
An internal error has occurred. The ''<insert_0>'' properties file does not exist in <insert_1>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0014E
The configuration options directory ''<insert_0>'' does not exist, or does not contain a required properties file.
Severity
20 : Error
Explanation
The specified configuration options directory does not exist. The command cannot be completed.
Response
Verify that the configuration options directory specified is correct. Reissue the command with a corrected configuration options parameter. If this does not resolve the problem, contact the IBM Support Center for further assistance.
BFGAP0015E
An internal error has occurred. The properties file ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0016E
The properties file <insert_0> could not be read due to: <insert_1>.
Severity
20 : Error
Explanation
The specified properties file could not be read for the specified reason. As a result, the current command could not be completed.
Response
Use the information present in the message to identify why the specified properties file could not be read. If possible correct the problem, otherwise contact the IBM support center for further assistance.
BFGAP0017E
An internal error has occurred. Unable to complete the command because the agent directory ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0018E
Unable to complete the command because the agent directory ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
The agent directory must exist for a validly configured agent.
Response
Check that the agent name has been specified correctly on the command and that the agent exists. Run the command again with a valid agent name. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0019E
An attempt to create a reply queue to receive the transfer result has failed. Exception is ''<insert_0>''.
Severity
20 : Error
Explanation
The command has the -w (wait for completion) parameter set but could not create a reply queue to receive the results.
Response
Run the command again without the -w (wait for completion) parameter or review the agent properties to identify the configuration problem.
BFGAP0020E
A messaging problem prevented the command from completing successfully. The reason was: <insert_0>. A connection could not be established to the default queue manager.
Severity
20 : Error
Explanation
The command could not complete because the JMS subsystem for connecting to IBM MQ detected a problem. The reason specified in the message corresponds to the type of problem encountered. The problem occurred while trying to establish a bindings transport mode connection to the default queue manager.
Response
Consult the IBM MQ product documentation to interpret the reason. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0021E
A messaging problem prevented the command from completing successfully. The reason was: <insert_0>. A connection could not be established to queue manager <insert_1>.
Severity
20 : Error
Explanation
The command could not complete because the JMS subsystem for connecting to IBM MQ detected a problem. The reason specified in the message corresponds to the type of problem encountered. The problem occurred while trying to establish a bindings transport mode connection to the specified queue manager.
Response
Refer to the IBM MQ product documentation to interpret the reason. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0022E
A messaging problem prevented the command from completing successfully. The reason was: <insert_0>. A connection could not be established to the default queue manager on host ''<insert_1>'' using port <insert_2> and channel <insert_3>.
Severity
20 : Error
Explanation
The command could not complete because the JMS subsystem for connecting to IBM MQ detected a problem. The reason specified in the message corresponds to the type of problem encountered. The problem occurred while trying to establish a client transport mode connection to the default queue manager, using the specified connection information.
Response
Consult the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0023E
A messaging problem prevented the command from completing successfully. The JMS error is: <insert_0>. A connection could not be established to queue manager <insert_1>, on host ''<insert_2>'' using port <insert_3> and channel <insert_4>.
Severity
20 : Error
Explanation
The command could not complete because the JMS subsystem for connecting to IBM MQ detected a problem. The reason specified in the message corresponds to the type of problem encountered. The problem occurred while trying to establish a client transport mode connection to the specified queue manager, using the specified connection information.
Response
Consult the IBM MQ product documentation to interpret the information. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0024E
A messaging problem prevented the command from completing successfully, for queue <insert_2> on queue manager <insert_1>. The reason was: <insert_0>.
Severity
20 : Error
Explanation
The command could not complete because the JMS subsystem for connecting to IBM MQ detected a problem. The completion code and reason code specified in the message correspond to the type of problem encountered.
Response
Consult the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0025W
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' properties file is outside the range of valid numerical values for this property. The range is <insert_2> - <insert_3>.
Severity
10 : Warning
Explanation
The value supplied for the property in the specified properties file is outside the specified range of acceptable values. The value will be ignored.
Response
Refer to the product documentation to determine a vaild value for the parameter. Update the specified properties file to correct the value of the specified property.
BFGAP0026W
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' properties file is not a valid numerical value.
Severity
10 : Warning
Explanation
The value supplied for the specified property in the specified properties file is not a valid numerical value. As a result, the property will be ignored.
Response
Refer to the product documentation to determine a valid value for the parameter. Update the specified properties file to correct the value of the specified property.
BFGAP0027W
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' property file is too long. The maximum length for this property value is 48 characters.
Severity
10 : Warning
Explanation
The value supplied for the specified property in the specified properties file is longer than 48 characters. The maximum length permitted for values of this property is 48 characters. As a result, the property will be ignored.
Response
Correct the value of the specified property in the specified properties file.
BFGAP0028W
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' property file contains characters that are not permitted in an IBM MQ object name.
Severity
10 : Warning
Explanation
The value supplied for the specified property in the specified properties file contains characters that are not permitted in an IBM MQ object name. The property will be ignored.
Response
Refer to the IBM MQ product documentation to determine the rules for naming IBM MQ objects. Correct the value of the specified property in the specified properties file.
BFGAP0029E
The value supplied for the ''<insert_0>'' property in the ''<insert_1>'' property file is in a format that has not been recognized.
Severity
20 : Error
Explanation
The value supplied for the specified property is in a format that has not been recognized. As a result, the command cannot be completed.
Response
Reissue the command with a value for the specified property that conforms to the following format: yyyy-MM-ddThh:mm or hh:mm.
BFGAP0030E
The value ''<insert_0>'' is not valid for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a valid option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGAP0031E
The value ''<insert_0>'' is not valid for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a valid option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGAP0032E
The value ''<insert_0>'' is not a valid locale for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a valid locale option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGAP0033E
The value ''<insert_0>'' is not a valid time zone for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a valid time zone option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGAP0034E
The value ''<insert_0>'' is not a valid file encoding for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The value given in the command argument is not a valid file encoding option for the argument.
Response
Review the possible options from the usage information, then correct and resubmit the command.
BFGAP0035E
The value ''<insert_0>'' is not a valid port reference for argument ''<insert_1>''.
Severity
20 : Error
Explanation
The given value is not a valid port reference. The port must be an integer in the range of 0 to 65534.
Response
Review the possible options from the usage information, then correct the argument and resubmit the command.
BFGAP0036E
The configuration options directory name is blank.
Severity
20 : Error
Explanation
The specified configuration options directory must be a valid, non-blank name. The command cannot be completed.
Response
Correct the configuration options to specify a valid directory. Reissue the command with a corrected configuration options parameter. If this does not resolve the problem, contact the IBM Support Center for further assistance.
BFGAP0037E
The specified agent name is blank.
Severity
20 : Error
Explanation
The specified agent name must be a valid, non-blank name. The command cannot be completed.
Response
Correct the agent name to specify a valid name. Reissue the command with a corrected agent name parameter. If this does not resolve the problem, contact the IBM Support Center for further assistance.
BFGAP0038E
The agent name ''<insert_0>'' is not valid.
Severity
20 : Error
Explanation
We have specified an agent name that is longer than 28 characters or that contains characters other than 'A-Z', 'a-z', '0-9', '.', or '_'.
Response
Reissue the command with a valid agent name.
BFGAP0039E
Unable to determine the queue manager to use.
Severity
20 : Error
Explanation
It is not possible to determine which queue manager to send the stop request to.
Response
Explicitly specify the queue manager as a command line argument.
BFGAP0040E
The SSL cipher specification <insert_0> is not supported.
Severity
20 : Error
Explanation
A SSL cipher specification that was read from the MQMFT connection properties is not supported.
Response
Update the MQMFT connection properties to specify a valid SSL cipher specification, or specify a valid SSL cipher suite.
BFGAP0041E
A messaging problem prevented the command from completing successfully, for queue <insert_2> on queue manager <insert_1>. The reason was: <insert_0>
Severity
20 : Error
Explanation
The command could not complete because the JMQI subsystem for connecting to IBM MQ detected a problem. The completion code and reason code specified in the message correspond to the type of problem encountered.
Response
Consult the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0042E
An attempt to create a reply queue to receive the command result has failed. Exception is ''<insert_0>''.
Severity
20 : Error
Explanation
The command needs to wait for a reply but could not create a reply queue to receive it, because the JMQI subsystem for connecting to IBM MQ detected a problem.
Response
Consult the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0043E
A messaging problem prevented the command from completing successfully, for queue <insert_3> on queue manager <insert_2>. The IBM MQ completion code was <insert_0>, and the reason code was <insert_1>.
Severity
20 : Error
Explanation
The command could not complete because IBM MQ detected a problem. The completion code and reason code specified in the message correspond to the type of problem encountered.
Response
Consult the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0044E
An internal error has occurred. There was an attempt to wait on a reply queue before initialization had occurred, which caused the command to fail.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0045E
Monitor of the request has stopped because the associated queue manager is no longer running.
Severity
20 : Error
Explanation
The command is monitoring for a reply message on its queue manager. This queue manager has been stopped and monitoring can no longer continue. The original request might still be continuing if its queue manager is still operational. Otherwise the request will have been suspended awaiting restart of the queue manager. In either case, monitoring for completion can no longer be performed.
Response
Investigate why the queue manager has been stopped.
BFGAP0046E
An internal error has occurred. The exception was: <insert_0>
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0047E
An internal error has occurred. The exception was: ''<insert_0>'', caused by: ''<insert_1>''
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0048E
An internal error has occurred. The exception was: ''<insert_0>''
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0049E
A messaging problem prevented the command from completing successfully. The IBM MQ completion code was <insert_0> and the reason code was <insert_1>. A connection could not be established to the default queue manager.
Severity
20 : Error
Explanation
The command could not complete because IBM MQ detected a problem. The completion code and reason code specified in the message correspond to the type of problem encountered. The problem occurred while trying to establish a bindings transport mode connection to the default queue manager.
Response
Consult the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0050E
A messaging problem prevented the command from completing successfully. The IBM MQ completion code was <insert_0>, and the reason code was <insert_1>. A connection could not be established to queue manager <insert_2>.
Severity
20 : Error
Explanation
The command could not complete because IBM MQ detected a problem. The completion code and reason code specified in the message correspond to the type of problem encountered. The problem occurred while trying to establish a bindings transport mode connection to the specified queue manager.
Response
Refer to the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0051E
A messaging problem prevented the command from completing successfully. The IBM MQ completion code was <insert_0> and the reason code was <insert_1>. A connection could not be established to the default queue manager on host ''<insert_2>'' using port <insert_3> and channel <insert_4>.
Severity
20 : Error
Explanation
The command could not complete because IBM MQ detected a problem. The completion code and reason code specified in the message correspond to the type of problem encountered. The problem occurred while trying to establish a client transport mode connection to the default queue manager, using the specified connection information.
Response
Consult the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0052E
A messaging problem prevented the command from completing successfully. The IBM MQ completion code was <insert_0>, and the reason code was <insert_1>. A connection could not be established to queue manager <insert_2>, on host ''<insert_3>'' using port <insert_4> and channel <insert_5>.
Severity
20 : Error
Explanation
The command could not complete because IBM MQ detected a problem. The completion code and reason code specified in the message correspond to the type of problem encountered. The problem occurred while trying to establish a client transport mode connection to the specified queue manager, using the specified connection information.
Response
Consult the IBM MQ product documentation to interpret the completion and reason codes. Use this information to correct the problem, if possible. If this information is not sufficient to resolve the problem, contact the IBM Support Center.
BFGAP0053E
An internal error has occurred. No connection for command to queue: <insert_0> on queue manager: <insert_1>.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
Correct the MQMFT Web Gateway configuration to specify a valid CCSID. Consult the IBM MQ product documentation for more information.
BFGAP0056E
The properties file <insert_0> could not be written due to: <insert_1>.
Severity
20 : Error
Explanation
The specified properties file could not be written for the specified reason. As a result, the current command could not be completed.
Response
Use the information present in the message to identify why the specified properties file could not be written. If possible correct the problem, otherwise contact the IBM Support Center for further assistance.
BFGAP0057E
Monitor of the request has stopped because the associated queue manager returned an empty response message and reconnection was not possible.
Severity
20 : Error
Explanation
The command was waiting for a reply message from the agent, but it received an empty response. This usually means that the temporary reply queue has been removed from the remote queue manager.
Response
Investigate why the temporary reply queue might have been removed.
BFGAP0058W
The local communications address ''<insert_0>'' given for property ''<insert_1>'' is not valid and has been ignored.
Severity
10 : Warning
Explanation
The specified local communications address is not valid. The format of this address is: [ip-addr][(low-port[,high-port])], where square brackets ([ ]) denote optional information, for example: HOST.IBM.COM(5000,5999). The value will be ignored if the address is incorrectly specified.
Response
Modify the appropriate properties file so that the value assigned to the given property is a valid local communications address before retrying the command.
BFGAP0059E
An internal error has occurred. The product logging directory ''<insert_0>'' does not exist or cannot be read.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP0060E
The logging options directory name is blank.
Severity
20 : Error
Explanation
The specified configuration options directory must be a valid, non-blank name. The command cannot be completed.
Response
Correct the configuration options to specify a valid directory. Reissue the command with a corrected configuration options parameter. If this does not resolve the problem, contact the IBM Support Center for further assistance.
BFGAP0061E
The configuration logging directory ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
The specified configuration logging directory does not exist. The command cannot be completed.
Response
Verify that the configuration logging directory specified is correct. Reissue the command with a corrected configuration options parameter. If this does not resolve the problem, contact the IBM Support Center for further assistance.
BFGAP0062E
It was not possible to read the passwordfrom the console.
Severity
20 : Error
Explanation
An error occurred reading the password fromthe console.
Response
Ensure we are using a Java SE 6.0 Runtime.Alternatively specify the password using the '-dbPassword' command line parameter.
BFGAP0063I
Use first available coordination property set ''<insert_0>'' as the default.
Severity
0 : Information
Explanation
Because a suitable default coordination property set could not be found, the first available valid one will be used.
Response
Explicitly select a default coordination property set by consulting the supplied documentation.
BFGAP0064E
The specified logger name is blank.
Severity
20 : Error
Explanation
The specified logger name must be a valid, non-blank name. The command cannot be completed.
Response
Correct the logger name to specify a valid name. Reissue the command with a corrected logger name parameter. If this does not resolve the problem, contact the IBM Support Center for further assistance.
BFGAP0065E
An internal error has occurred. Unable to complete the command because the logger directory ''<insert_0>'' does not exist.
Severity
20 : Error
Explanation
This exception is unexpected. The cause is not immediately known.
Response
If the problem persists, see problem determination information in the product documentation.
BFGAP9999E
<insert_0>
Severity
20 : Error
Explanation
If this message does not give enough information, check the accompanying error messages for further information.
Response
For further information on resolving this error, see the problem determination information on the product website.