Work with channel status on IBM® i

We can work with the channel status from the Work with Channel Status panel.

Use the WRKMQMCHST command to display the first of a set of panels showing the status of your channels. We can view the status panels in sequence when you select Change-view (F11).

Alternatively, selecting option 8 (Work with Status) from the Work with MQM Channels panel also displays the first status panel.

MQSeries Work with Channel Status

Type options, press Enter.
5=Display  13=Ping  14=Start  15=End  16=Reset  17=Resolve


Opt Name         Connection      Indoubt   Last Seq
CARTS_CORSAIR_CHAN  GBIBMIYA.WINSDOA1    NO        1
CHLNIC        9.20.2.213       NO        3
FV.CHANNEL.PETER2   9.20.2.213       NO      6225
JST.1.2        9.20.2.201       NO       28
MP_MUST_TO_CORS    9.20.2.213       NO       100
MUSTANG.TO.CORSAIR  GBIBMIYA.WINSDOA1    NO       10
MP_CORS_TO_MUST    9.20.2.213       NO       101
JST.2.3        9.5.7.126        NO       32
PF_WINSDOA1_LU62   GBIBMIYA.IYA80020    NO       54
PF_WINSDOA1_LU62   GBIBMIYA.WINSDOA1    NO       500
ST.JCW.EXIT.2TO1.CHL 9.20.2.213       NO       216

Bottom
Parameters or command
===>
F3=Exit  F4=Prompt  F5=Refresh  F6=Create  F9=Retrieve  F11=Change view
F12=Cancel  F21=Print

The options available in the Work with Channel Status panel are:

Menu option	Description
5=Display	Displays the channel settings.
13=Ping	Initiates a Ping action, where appropriate.
14=Start	Starts the channel.
15=End	Stops the channel.
16=Reset	Resets the channel sequence number.
17=Resolve	Resolves an in-doubt channel situation, manually.